How to achieve the annoying orange effect?

Is there a filter or name for this technique?
Can you direct me to a tutorial for this technique by daneboe of youtube?
http://www.youtube.com/watch?v=xjdBCeUdAmI
I appreciate any help. I've spent several hours looking but haven't been using the right keywords.

Add your face layer to the timeline, draw a mask with the pen or circle tools. Adjust the vertex postions with the move tool. Hit MM (two times M in short succession) to reveal the mask properties. if the shape needs to beanimated over time, enable the stopwatch on the mask shape property. Adjust the featheruing as needed. Rinse repeat for all elements you need. Then place the fruit below and move your elements in position as needed. To belnd in the skin tones, use Effects --> Color Correction --> Hue Saturation and shift the red tones around....
Mylenium

Similar Messages

How do I do the annoying orange effect with FCP X?

I was wandering how you do do the anoying orange effect. I need to put my face on fruit!

Colorize effect

How do I do the annoying orange effect in Final Cut Pro X?

I cant find any tuturials on how to do this on the new version of Final Cut Pro.

You might get a more knowledgeable answer if you post in the actual Pro Applications forums - the FCP users hang out there:
https://discussions.apple.com/community/professional_applications

How to achieve the distort motion effect ala Final Cut Pro in Premiere CS4?

Newbie here.
I have just recently started with video editing. In Final Cut Pro I have the option to distort a still image in the motion/effects panel. In premiere cs4 I only find the option to scale it up/down without the option to individually distort the four corners. Does anyone know how this can be done in premiere cs4?
The effect i am going for is the same as in Apples presentation of iPad. http://www.apple.com/quicktime/qtv/specialevent0110/
I have an presentation wich I need to insert all the slides from the powerpoint presentation in the video.
Any help would be appreciated. ( I have searched around for an solution, but without results)
Regards T

Here is a resource, that deserves a bookmark, the PrPro-Wiki. Plenty of great FAQ articles and tutorials.
I see the "Distort" part of the Effect in FCP, but the "Motion" aspect was throwing me. I kept thinking Posterize Time, and that is anything but what you were looking for. That's why I was going to head to Google for the FCP Help files, or similar.
Good luck,
Hunt

Particle effect -how to achieve this kind of effect exactly

Hello please help me to achieve this type of flickering particle effect. how to achieve this in After effect which is shown at 0.8 sec to 0.11 in the attached link video. http://www.istockphoto.com/stock-video-2682258-hearts.php

I can't give you the exact settings but you could use Trapcode Particular with a custom particle or CC Particle world. Just turn gravity to 0 and set up a custom particle.
Your particle layer will be behind the spinning hearts layer. This should get you going in the right direction.

After the new project by importing PPT release, how to achieve the release of the demo mode SWF, but not now only Click to continue?

After the new project by importing PPT release, how to achieve the release of the demo mode SWF, but not now only Click to continue?
Note：Captivate 5.5
Thks

通过导入PPT新建的项目发布后,如何实现发布演示模式的SWF（自动播放）,而不是交互模式的SWF（只能点击才能继续）？

How to use the set functions effectively in webi ,please let me know with detail

how to use the set functions effectively in webi ,please let me know with detail

Hi,
we use use set functions on heirarchies with aggregate functions mostly .
If you include member_set, Min returns the minimum value of the aggregated data for all members in the member set.
Member_set can include multiple sets separated by semicolons (;).
The list of member sets must be enclosed in {}.
If the member set expression does not specify a precise member or node, the hierarchy referenced must be present in the table, then the member set expression references the current member in the hierarchy in the table. If the hierarchy is not in the table, the function returns the message #MULTIVALUE.
Eg .
1)     Ancestor
=Sum([YTD] ; {Ancestor([Test Hierarchy];2)})
2)     IsLeaf
=[Test Hierarchy].IsLeaf
You can use this function when you want to show your Measure only at lower level .
3)     .Depth
=[Test Hierarchy].Depth
This is also function used with hierarchy to find Level of Members .
Follow this link for PDF reference .
Page 147
https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&ved=0CDIQFjAB&url=https%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2Fboexir4%2Fen%2Fxi4sp5_ffc_en.pdf&ei=nBAUU-iUM4WWrAeMuoCoDg&usg=AFQjCNHakXsEjd_yUk2y3lVdibf3PXpEOA&bvm=bv.61965928,d.bmk
search on SCN this question was discussed before also one those links .
http://scn.sap.com/thread/3183380
Hope this will help you .

How to achieve the results by Query ??

Hello Guys,
I have couple tables which I need to join to get the result....This is what is in the tables...
CList Table
CID, Name
A, ABC
B,CDE
C,JFK
JList Table
JID, Name
1, Something
2, Another
3, Else
4, Should be something
JOb_2_Courses
JobID, CourseID
1,A
1,B
2,C
Employee Table
EID, Job_ID
1A, 1
2A,1
3B,1
2C,2
23D,3
CStatus Table
StatusID, Desc
1,Completed
2,Pending Approval
3,Declined
4,Scheduled
5,Register
Now user can only register the course which are related with their job....NO course else.....
When they register it is moved to temp_course_registration and then once completed to COURSE_HISTORY
For Example : So Employee : 1A will see two courses to register A and B...
Say he registers A....it makes an entry in temp_course_registration table with the course id, employeeid and date....
With further steps once that status is updated to '1'.....the course is deleted from temp_course_registration and is moved to course_history........
Now to show to the user...I need to include all my tables in the query and on the basis of status, show necessary things to the user....
Output :
Course_ID, Status.............
Say if they completed the course will come from course_history, if in the process will come from temp_course_registration.....if nothing is in the tables for the specific employee...this means status is '5' and they need to register everything...
Can someone let me know, how to achieve the results....
Thanks,
Harsimrat

Hello
I'm off home now so I can't look at the query, but for future reference, if you want to improve your chances of getting help, you need to provide simple create table statements, and test data to go with it. I've done that with what you provided and hopefully someone else will be able to help. Also, you were asked if you could provide this in your other thread...
CREATE TABLE CList(CID varchar2(1), Name varchar2(3))
insert into clist values('A', 'ABC');
insert into clist values('B','CDE');
insert into clist values('C','JFK');
CREATE TABLE JList(JID number, Name varchar2(30))
insert into jlist values(1, 'Something');
insert into jlist values(2, 'Another');
insert into jlist values(3, 'Else');
insert into jlist values(4, 'Should be something');
CREATE TABLE JOb_2_Courses(JobID number, CourseID varchar2(1))
insert into job_2_courses VALUES(1,'A');
insert into job_2_courses VALUES(1,'B');
insert into job_2_courses VALUES(2,'C');
CREATE TABLE Employee (EID varchar2(3), Job_ID number)
INSERT INTO employee VALUES('1A', 1);
INSERT INTO employee VALUES('2A',1);
INSERT INTO employee VALUES('3B',1);
INSERT INTO employee VALUES('2C',2);
INSERT INTO employee VALUES('23D',3);
CREATE TABLE CStatus(StatusID number, Descr varchar2(30))
insert into cstatus values(1,'Completed');
insert into cstatus values(2,'Pending Approval');
insert into cstatus values(3,'Declined');
insert into cstatus values(4,'Scheduled');
insert into cstatus values(5,'Register');HTH
David

I finally found the way to DISABLE the annoying sound effect in Windows

I tried looking around the site for some answers to get rid of the annoying sound effect after a page loads in iTunes 8 on Windows Vista. I have found the answer!
*Vista users:* Right click on your desktop, and then go all the way down and click "Personalize". Then in personalize, click "Sounds". Scroll down until you see the iTunes category. Then simply click the "Page load complete" sound and choose (None) as the sound.
Annoying sound DISABLED.
Hope this helps!

do you tried this solution:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=39227
Perhaps this want help you.....
Zyx

How to achieve the project is obligatory entry when creating transport requ

Hello
How to achieve the project is obligatory entry when creating transport request

In T-code SE03, under Administration -> Display/Change Request Attributes
Select "SAP_CTS_PROJECT" and hit the change button and then change the value of "Default for All Clients" to Mandatory
Hope this helps.
Thanks,
Naveed

How to achieve the best quality when doing a narration?

Hello,
I'm trying to figure out how to achieve the best possible narration in a documentary I'm doing using the FCP voice over tool, a USB mic, and Final Cut Studio's audio filters. Am I on the right track? How do I clean up an average voice over narration? Do I need additional equipment? Any advice would be appreciated.
Thanks,
Jordan

The best thing you can do is to record it properly in the first place - if you want it to sound good. The environment you record in is VERY important as is the choice of mic you use ... most of the consumer USB mics aren't all that great in terms of quality.
Record in an acoustically flat room with good sound dampening. Even a clothes closet will do in a pinch. Record through a mixer so you can monitor the VO artist as they record. I've found it better to record to tape (camera or VTR) with a pro mic than to use FCP's voice over tool.
-DH

How to achieve the fatest Digital IO write speed?

How fast can I write to a digital IO port?How to achieve the fatest write speed? For test purpose, after config port, using DIO Port write.vi in a whileLoop by 6024E board,repeatly write1-2(01 and 10bin), i can only get a speed about 10kHz,i.e. every 106 us write a byte, can that be faster? how? software solution and hardware solution? Thanks!

Hey Yfayne,
It is very hard to say how fast you can write the digital lines on an E-Series device, because it is completely software and computer dependent. The exact same DAQ device with the exact same code will execute completely different on a 233MHz machine when compared to a 2.4GHz machine, because it depends on how fast the computer can execute the loop. If your program slows down to perform another task like opening another program or surfing the web it will slow the rate the computer can execute the loop and mess up the timing.
In addition, the digital lines on the E-Series use the DAQ-STC chip that was never designed for high speed. If you need a high speed hardware time device I would suggest using the PCI-6533 or PCI-6534. The devices were desig
ned for high speed digital applications and can easily exceed the 10 kHz rate consistently.
Here are a few links that you will find useful.
http://zone.ni.com/devzone/conceptd.nsf/webmain/467ed254f3a30b1286256a6f00720951
http://sine.ni.com/apps/we/nioc.vp?cid=1104〈=US
I hope this helps out.
Joshua P.
Application Engineering
National Instruments

How to achieve the from and to date range in report builder 3.

I AM TRYING TO CREATE ONE REPORT FROM REPORT BUILDER 3.
WHERE I AM UNABLE TO DEFINE THE DATE RANGE.
HOW TO ACHIEVE THE DATE RANGE IN REPORT BUILDER.
NEED FROM DATE AND TO DATE FILTER IN REPORT BUILDER FOR PK DATE.

Hi Ganesh,
According to your description, you create a report in Report Builder 3.0, and create two parameters FromDate and EndDate, now you want to use the parameters in your MDX query, right?
If in this case, here is a sample query for your reference.
select
{[Measures].[Internet Sales Amount]
} on columns,
{[Date].[Date].members} on rows
from(
select
STRTOMEMBER("[Date].[Date].&["+@StartDate+"]"):STRTOMEMBER("[Date].[Date].&["+@EndDate+"]")
) on columns
from [Adventure Works]
Reference:STRTOMEMBER
Regards,
Charlie Liao
TechNet Community Support

How can I eliminate the annoying sound effect at startup on my iMac?

How can I eliminate that annoying sound effect during the startup on my iMac?

Sorry about high-jacking your thread! Just occasionally some of us lapse into humour to keep sane.
Please post back if you don't feel you have had a proper reply to your question.

How to achieve the same effect seen in attached screenshot

I dig the artist's style in image on very right of attached image -
MINE ON LEFT W/RED ARROWS.
Question, as I have my character open in PS6.0
and still in PSD format as I am coloring him, what would be the simplest
steps to take to add that shading like black under his eye (in right side image)?
Or that stippled shaded effect along his nose?
See areas under my character's eye and nose I want to experiment on . . .
THANK YOU!
I dig the artist's style in image on very right of attached image -
MINE ON LEFT W/RED ARROWS.
Question, as I have my character open in PS6.0
and still in PSD format as I am coloring him, what would be the simplest
steps to take to add that shading like black under his eye (in right side image)?
Or that stippled shaded effect along his nose?
See areas under my character's eye and nose I want to experiment on . . .
THANK YOU!

How phenomenal it is to go to this forum and have this type of invaluable feedback from each and every one of you.
I certainly appreciate this! tfkelly42 you did some great touch-ups on my sample mate! I do like this, like having you all over my shoulder saying, "click this, then that tool...." THANKS! And, I use PS6, so my version is NEWER than his....so I think I ought to achieve the same effect! BTW, here is a screenshot of my tool bar with BRUSH highlighted....but before venturing into a test....should I highlight the area in any way....prior to trying the brush tool and the rest? I'll post a sample back here (probably on Tuesday...it's gettng late here) BUT THANKS!

How to achieve the annoying orange effect?

Similar Messages

Maybe you are looking for