How to achieve the same effect seen in attached screenshot

I dig the artist's style in image on very right of attached image -
MINE ON LEFT W/RED ARROWS.
Question, as I have my character open in PS6.0
and still in PSD format as I am coloring him, what would be the simplest
steps to take to add that shading like black under his eye (in right side image)?
Or that stippled shaded effect along his nose?
See areas under my character's eye and nose I want to experiment on . . .
THANK YOU!
I dig the artist's style in image on very right of attached image -
MINE ON LEFT W/RED ARROWS.
Question, as I have my character open in PS6.0
and still in PSD format as I am coloring him, what would be the simplest
steps to take to add that shading like black under his eye (in right side image)?
Or that stippled shaded effect along his nose?
See areas under my character's eye and nose I want to experiment on . . .
THANK YOU!

How phenomenal it is to go to this forum and have this type of invaluable feedback from each and every one of you.
I certainly appreciate this! tfkelly42 you did some great touch-ups on my sample mate! I do like this, like having you all over my shoulder saying, "click this, then that tool...." THANKS! And, I use PS6, so my version is NEWER than his....so I think I ought to achieve the same effect! BTW, here is a screenshot of my tool bar with BRUSH highlighted....but before venturing into a test....should I highlight the area in any way....prior to trying the brush tool and the rest? I'll post a sample back here (probably on Tuesday...it's gettng late here) BUT THANKS!

Similar Messages

  • Does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

    does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

    Several ways to get similar results.  Image > Adjustments > Posturize with low values similar to what you'd use n Cutout.  This is the most flexible way I can think of as you keep the image in RGB mode with layers intact.  A more radical approach would be to reduce bit depth using Indexed Colour.  You'll need to experiment with settings, try changing Forced to Primaries, and Matte to Foreground Color.  There's no going back from this route, although you can change the mode back to RGB to re-enable layers, adjustment layers etc.
    A nice thing about the Filter gallery filters is that you can change the layer to a Smart object with all the control that gives you.
    Now if only this forum could filter out bizarre content.

  • How to achieve the same function as regexp_substr in 9i?

    How to accomplish below in 9i? I know regexp_substr is not available in 9i, so I wonder how to mix several funcs to achieve this?
    SELECT regexp_substr('|83~GT67XVFU0RCVIV|635~SITGRP|507~2006-10-03 14:18:26|101~TOMS NEW|1462~STEVE ROBB INC|507~2006-10-03 14:18:26|','|101~[^|]+|') from dual;thanks

    You can use SUBSTR and INSTR.
    If you know which pipe's to look between you can do something like:
    SQL> select * from t;
    STR
    |83~GT67XVFU0RCVIV|635~SITGRP|507~2006-10-03 14:18:26|101~TOMS NEW|1462~STEVE ROBB INC|507~2006-10-03 14:18:26|
    1 row selected.
    SQL> select substr( str
      2               , instr(str, '|', 1, 4)+1
      3               , instr(str, '|', 1, 5)-instr(str, '|', 1, 4)-1
      4               ) str
      5  from   t;
    STR
    101~TOMS NEW
    1 row selected.

  • HT1349 How do I set up a speed dial on my iPhone 4s?  I am used to the bberry where I just keep my finger on a number in order to dial. This is very useful in the car.  How do I get the same effect on iPhone?

    How do I set up a speed dial on my iPhone 4s?  I am used to the bberry where I just keep my finger on a number in order to dial. This is very useful in the car.  How do I get the same effect on iPhone?

    I found a post from Alope that told me exactly how to fix it.
    Go to:
    Settings   - General   - Restrictions    -    put your pass code in   -     Facetime      -  turn the switch to ON
    Worked perfectly to stop the message that said, Not authorized to do that!

  • I recently connected my new MBA to an ACER display using the appropriate Apple hardware to connect to a VGA port. The quality of the ACER display is poor- the image is not clear. How do I achieve the same clarity of picture as my MBA screen?

    I recently connected my new MBA to an ACER display using the appropriate Apple hardware to connect to a VGA port. The quality of the ACER display is poor- the image is not clear. How do I achieve the same clarity of picture as my MBA screen?

    Welcome to the Apple Community.
    AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer).
    On the basis of the specifications you have given for your set up, mirroring should work.

  • How do I create in Illustrator the same effect of 'color burn' in Photoshop?

    How do I create in Illustrator the same effect of 'color burn' in Photoshop? I am trying to create a rainbow effect by bleding the colors but need this in Illustrator.

    Thanks! I found it! Thats what I needed!
    Serena Finn
    303.919.5239
    [email protected]
    finndesignshop.com

  • Welcome. At the outset, I'm sorry for my English :) Please help with configuration Photoshop CS6 appearance. How to disable the background of the program so you can see the desktop. (same menus and tools) Chiałbym to be the same effect as CS5.

    Welcome.
    At the outset, I'm sorry for my English
    Please help with configuration Photoshop CS6 appearance.
    How to disable the background of the program so you can see the desktop. (same menus and tools)
    i wantto be the same effect as CS5.

    Please try turning off
    Window > Application Frame

  • Can I set a default to effect settings? Or apply the same effect settings to multiple clips?

    If I want to set multiple clips to have the same effect, can I do that without resetting the effects every time I add it?
    Or can I set a default setting to an effect that is different from the default default?

    ATalkingFish wrote:
    Can you elaborate on how to use copy/paste attributes with effects?
    the Manual says :
    http://help.apple.com/finalcutpro/mac/10.0.6/#ver3029fc422

  • How to export the same mb size of my cr2 files into jpg or tiff files in Lr?

    How to export the same mb size of my cr2 files into jpg or tiff files in Lr?
    Let's say my file size is 22mb, when i export the file to tiff or jpg, although Iam careful with the settings- file size, dimension, resolution, I can't manioukate how I want it.
    With jpg I tried everything, no matter what i do or change in files size or resoltion it remains the same size- 7mb as opposed to 22..
    Please advise,
    Best wishes,
    T

    I would noramlly opt for a tiff file, sending such a high res through the nest a nightmare
    This is probably just an improper use of terminology, but the resolution of a JPG, DNG and TIF should all be the same.
    The files differ in size, not resolution and not number of pixels.
    Jpg is not that bad, but its a pitty they have to be edited under a jpg format..
    Your raws are edited as raw. There is no loss of quality in the editing process. The files are then exported as JPG, which will cause a loss of quality. For just about any use, the loss of quality in the image when you export a JPG at quality level 12 is NOT noticeable. For many uses, exporting a JPG at a quality level of 8 will not be noticeable either, unless you intend to print the photo at a very large size. As twenty_one (not his real name) said, "Jpeg compression is fantastically effective".

  • How to make the same code that works only?

    how to make the same code that works only?
    code:
    Form2.Close = Me.Enabled = true
    effect such as this code

    I have this code:
    Public Class Form1
    Private Sub Button4_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button4.Click
    Form2.Show()
    Me.Enabled = False
    End Sub
    Private Sub Button5_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button5.Click
    Form3.Show()
    Me.Enabled = False
    End Sub
    End Class
    he wants to after closing Form2 and Form3 unblocked the whole form1
    it means that:
    when I click the button, displays the himself form2 and blocks himself form1" and after closing Form2 , unlocks himself Form1"
    the same with Form3

  • How to achieve the fatest Digital IO write speed?

    How fast can I write to a digital IO port?How to achieve the fatest write speed? For test purpose, after config port, using DIO Port write.vi in a whileLoop by 6024E board,repeatly write1-2(01 and 10bin), i can only get a speed about 10kHz,i.e. every 106 us write a byte, can that be faster? how? software solution and hardware solution? Thanks!

    Hey Yfayne,
    It is very hard to say how fast you can write the digital lines on an E-Series device, because it is completely software and computer dependent. The exact same DAQ device with the exact same code will execute completely different on a 233MHz machine when compared to a 2.4GHz machine, because it depends on how fast the computer can execute the loop. If your program slows down to perform another task like opening another program or surfing the web it will slow the rate the computer can execute the loop and mess up the timing.
    In addition, the digital lines on the E-Series use the DAQ-STC chip that was never designed for high speed. If you need a high speed hardware time device I would suggest using the PCI-6533 or PCI-6534. The devices were desig
    ned for high speed digital applications and can easily exceed the 10 kHz rate consistently.
    Here are a few links that you will find useful.
    http://zone.ni.com/devzone/conceptd.nsf/webmain/467ed254f3a30b1286256a6f00720951
    http://sine.ni.com/apps/we/nioc.vp?cid=1104〈=US
    I hope this helps out.
    Joshua P.
    Application Engineering
    National Instruments

  • Help recreating the same effect

    Hi Photoshop Gurus
    I have a photo that I took in bangkok in october 2007 that I have converted to a 'arty' background image for a website that I manage for an organisation.
    When I did the effects I had just started with Photoshop and I can't remember the effects that I deployed.  I want to do another picture to make it look like this to overlay the images but can't get the same effect.  The first picture is of the grand palace in bangkok. I am the photographer - who took the pictures.
    I would like to know how to determine what the changes were and how i made them, I recall adjusting the curves, brightness and contrast but i am unable to remember all the changes that my daughter suggested so that I can apply them to the overlay picture (the overlay picture that I want to place is the sydney bridge - the website is for the australia thailand association- FYI).
    I have attached the pictures - the start picture is thai1430.jpg and the converted one is palacesmall.jpg.
    If possible, any pointers that can help me to replicate the effect - ie take the first picture and recreate the second - would be apprciated.  I have tried to look at the histograms but I am not that advanced yet to be able to move the image to that format.
    Any help appreciated - i will use this as a training exercise for me too.
    Thanks
    Doug

    Looks like the last step taken was inverted. Whatever was done before that I can only guess and play with the picture. Best bet is to call your daughter since she gave you the instructions in the first place. She just may remember.

  • How to use the same POWL query for multiple users

    Hello,
    I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
    "Query 'ABC' is already open in another session."
    where 'ABC' is the query name.
    Can you please tell me how to use the same POWL query for multiple users ?
    A fast reply would be highly appreciated.
    Thanks and Regards,
    Sandhya

    Batch processing usually involves using actions you have recorded.  In Action you can insert Path that can be used during processing documents.  Path have some size so you may want to only process document that have the same size.  Look in the Actions Palette fly-out menu for insert path.  It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

  • How to register the same schema with same URL

    I'm getting ORA-31085 error when try to register the same schema with same URl.
    My requirement is that I should be able to reregister the same schema with the same URL .
    I'm using the following function :
    PROCEDURE validateXmlSchema(inp_xmlMsg IN VARCHAR2,
    out_isValidDoc IN OUT NUMBER,
    inp_xmlSchema IN OUT VARCHAR2,
    out_varchar_notused OUT VARCHAR2)IS
    xmldoc XMLType;
    res number;
    BEGIN
    xmldoc := XMLtype(inp_xmlMsg);
    res := xmldoc.isSchemaValid(inp_xmlSchema);
    IF (xmldoc.isSchemaValid = 1) THEN
    out_isValidDoc := 1;
    ELSE
    out_isValidDoc := 0;
    END IF;
    END validateXmlSchema;
    This is used recursively.Until the schema is not validated for a given URL this function should keep on throwing error and once the schema is validated the data should be inserted in the DB.
    But its not happening as of now instead the ORA-31085 is thrown second time.
    Plz provide pointers to solve the issue.

    "mjs" <[email protected]> wrote in message
    news:g7kjk5$o6$[email protected]..
    > "mjs" <[email protected]> wrote in message
    > news:g7gl2g$i3d$[email protected]..
    >> "Zorrrro" <[email protected]> wrote
    in message
    >> news:g7gcjv$a6n$[email protected]..
    >>> I'm completely nuckered trying to find an answer
    for this...
    >>>
    >>> Does anyone know how to keep the same width an
    position of the submenus
    >>> of a
    >>> horizontal dropdown menu?
    >>> Thank you in advance.
    >>>
    >>> Cheers.
    >>
    >> Doesn't a simple style="width:200px" in the input
    tag work?
    >
    > I'll asume the answer is "yes", then. ;) You're welcome.
    I believe the OP is talking about a dropdown menu like this
    one
    http://www.tjkdesign.com/articles/keyboard_friendly_dropdown_menu/default.asp
    not about a "select menu".
    I could be wrong though...
    Thierry
    Articles and Tutorials:
    http://www.TJKDesign.com/go/?0
    http://developer.yahoo.com/
    helps you build applications and mashups

  • How to Use the same iview for both KM End User and the KM Administrator

    Hi friends,
    *This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
    Menu Options.
    i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
    Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
    the presentation settings for the KM Folder u201EReports_kmFolder‟.
    Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
    -> Km Content. Click on Details link of the folder reports_kmFolder.
    Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
    Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
    Click u201EOK‟.
    Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
    Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
    How rto resolve this????
    Regards,
    Prasad.

    Hello Prasad,
    Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
    Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
    Regards,
    Lorcan.

Maybe you are looking for