How to achieve this process in SAP SD module??

Hi,
I want to know whether this kind of scenario could be achieved in SAP system SD module??
We have only one material which the value or price is 10000USD, and this material could be only used 5 times. Everytime it is used, it will be goods issued in the system, and its value will be decreased 2000USD, this means this material will be drawn back into system and its value will be showed as 8000USD. And next time it will be 6000...4000...2000...0
After 5 times this kind of process, then this material is no-used any more.
I just want to know could 'Draw back' and 'decrease 2000USD everytime' 'show 'previous value - 2000' as new value every drawn back time' ....
how to achieve this in SAP SD system??
Thank you very much.

Hi,
This can be mapped in Foreign trade.You need to use Licensing functionality.Each time you use it, it depreciate by document value.
Thanks,
Vrajesh

Similar Messages

Service? How to handle this process in SAP?

Hi,
Ihave a problem
The customer provide us his own material,
In production process we add to it our own component. Than we have to pass it to our magazine with the same customer name but higher price.
Is it a service? How to handle in SAP.
Thanks in advance.
Artur

This is not service but internal subcontracting scenario, You can go through below link for understanding it better,
[Internal Subcontracting |http://forums.sdn.sap.com/thread.jspa?threadID=571772&messageID=4190422#4190422]

How to achieve this using UWL

Hi Friends,
I have the following requirement for Travel request workflow and Invoice approval workflow. Please let me know how to achieve this.
While sending a work item to sap inbox we will put the base BO in the task container right so that the approver can open the particular transaction.I need the same functionality in UWL but instead of the BO i need to place some link so that the user can open an iview or webdynpro application. Basically the user dont want to login to SAP GUI he needs everything to be done in Portal itself.
Do we need to do some settings in tcode SWFVISU for this or do we need to change the associated xml file in UWL to provide the link to iview. Please advice.

Hi,
If i understand your requirement correctly, you want to place a link of BO in UWL but don't want that to get to SAP GUI. Right ?
I think it's possible. We had ECC 6.0 and EP 6.0 with SP 11. And, we had the requirement of showing up the TRIP BO in UWL thru' an iVIEW. We tried the SWFVISU and it didn't work. But, i think this facility has been taken care in later service packs. Pl approach SAP and they should be able to help you out. I'm not sure about the details of the solution SAP provided us, but it worked for us..like there will be a button "Display XXXXXX" which infact opens up your BO in UWL without logging into GUI.
Hope this helps.
venu

How to Achieve this Data Load into Cube

Hi Experts,
Could you please update me on how to achieve this
I got a History data (25-35 Million Records) for about 8 years to be loaded to BW.
What is the best approach to be followed
1) Load everything into one cube and create aggregates or
2) Create 4 different cubes (with same data model) and load load 2 years of data into each cune (2Years * 4 Cubes = 8 Years Data) and develop a multicube on top of 4 cubes
If so how can i load data into respective cubes
Ex: Lets assure i got data from 31.12.2007 to 01.01.2000 which is 8 years of data
Now i created 4 Cubes--C1,C2,C3,C4 & C5
How can i specifically
load data from 01.01.2000 to 31.12.2001 (2 Years) to C1
load data from 01.01.2002 to 31.12.2003 (2 Years) to C2
load data from 01.01.2004 to 31.12.2005 (2 Years) to C3
load data from 01.01.2006 to 31.12.2007 (2 Years) to C4
load data from 01.01.2008 to 31.12.2010 (2 Years) to C5 (Currently Loading)
Please advise the best approach to be followed and why
Thanks

If you already have the cube C5 being loaded and the reports are based on this cube, then if you donot want to create additional reports, you can go ahead and load the history data into this cube C5.
What is your sourcesystem and datasource?. Are there selection conditions (in your infopackage) available to specify the selections? If so, you can go ahead and do full loads to the current cube.
For query performance, you can create aggregates on this cube based on the fiscal period / month / year ( whichever infoobject is used in the reports)
If your reports are not based on timeperiod, then multicube query will work as parrallelized sub queries and so there will be 4 dialog processes occupied on your BW system everytime the query is hit.
Also any changes that you want to make in cube will have to be copied to all cubes, so maintenance may be a question.
If there are enough justification, then approach 2 can be taken up

How to Achieve this in SQL Query?

How to Achieve this ?
I have a table with numeric value populated like this
create table random_numeral (numerals Number(10));
insert into random_numeral values (1);
insert into random_numeral values (2);
insert into random_numeral values (3);
insert into random_numeral values (4);
insert into random_numeral values (5);
insert into random_numeral values (6);
insert into random_numeral values (56);
insert into random_numeral values (85);
insert into random_numeral values (24);
insert into random_numeral values (11);
insert into random_numeral values (120);
insert into random_numeral values (114);
Numerals
1
2
3
4
5
6
56
85
24
11
120
114
I want to display the data as follows
col1 / col2 / col3
1 / 2 / 3
4 / 5 / 6
11 / 24 / 56
85 / 114 / 120
Can anyone Help me?

I hope there might be some simple way to do this and waiting for experts to reply.
Try the below query.
SQL> select * from random_numeral;
NUMERALS
         1
         2
         3
         4
         5
         6
        56
        85
        24
        11
       120
NUMERALS
       114
       100
       140
14 rows selected.
SQL> select a.numerals ||' / '||b.numerals||' / '||c.numerals from
2          (select numerals,rownum rn1 from
3          (
4              select numerals,mod(row_number() over(partition by 1 order by numerals),3)
5              from random_numeral
6          )
7          where rn=1) a,
8          (select numerals,rownum rn1 from
9          (
10              select numerals,mod(row_number() over(partition by 1 order by numerals),3)
11              from random_numeral
12          )
13          where rn=2) b,
14          (select numerals,rownum rn1 from
15          (
16              select numerals,mod(row_number() over(partition by 1 order by numerals),3)
17              from random_numeral
18          )
19          where rn=0) c
20 where   a.rn1=b.rn1(+)
21 and b.rn1=c.rn1(+)
22 /
A.NUMERALS||'/'||B.NUMERALS||'/'||C.NUMERALS
1 / 2 / 3
4 / 5 / 6
11 / 24 / 56
85 / 100 / 114
120 / 140 /
SQL>Cheers,
Mohana

How to achieve this tree table (displaying/modifying non leaf level details) ?? Image inside

Region
location
Dept
Budget Available
Allot Budget
Unused Budget
Decision for unused budget
US
200$
User Input
NY
100$
User Input
CA
100$
User Input
HR
50$
User Input
IT
50$
User Input
---------30$--------
20$
LOV
Add to Location
Use for Future Project
Add to Region
Spend as Bonus
How to achieve this tree table ?
My client wants that they should also be able to manage budge at Location or region level not only at the leaf(Dept) level.
I did a lot of research and finally found out that the details can only printed at the leaf(Dept) level.......
We can not hard code Region, locations and departments in table rows. When table tree is displayed we will only show all the regions... (US, UK, SA, IND, AUS, CAN,RUS, JPN.... etc..)
For Example:
Locations for US (NY, CA, OKH, WC...... etc.)
Locaitons for UK (SC, ENG, WL..... etc) and so on......
Departments for CA (HR, IT, ADMIN, FIN, TRVL, OPRN........ etc. ..)
Thanks in advance... It will be really great help if I get some breakthrough...
-Rahul

Hi,
what if you add a transient attribute to those view objects? This way you don't need to change the table structure.
Frank

I don't want my Time Capsule to link ti Internet, does anyone know how to achieve this ? Thanks Don

I don't want my Time Capsule to link to Internet, does anyone know how to achieve this ? Thanks Don

Don,
We have no idea how you have your network set up, or what devices other than a Time Capsule that you might have, so it it impossible to provide an answer for you based on what we know at this time.
Can you provide some details so that we can understand how you have things setup, what devices that you have, etc?
The Time Capsule does need to connect to the Internet to receive firmware updates from Apple, so you would be missing out on some significant things......like a recent important security update....if you try to configure the Time Capsule to connect in the way that you ask about.
Backups will not be "automatic" if you configure the Time Capsule without an Internet connection. You will have to manually switch networks whenever you want to back up, and then switch back again to your "other" network for normal use. Quite a hassle for most users, even if it can be done.

How to achieve this photographic slide display/navigation

Hi,
I would like to know how to achieve the following:
1. Go to
http://www.corneliaadams.com/
& then click on 'michael mundy' link. this opens up a page with
a slideshow of photographs that i really love. I have very basic
knowledge of scripting ,a nd i usually achieve my goals by
modifying flas that i have seen or by following tutorials (as
opposed to writing it myself). the great thng about the above
version is taht the images slide to an exact position when you
click on the forward or back arrows, and they slow down ever so
slightly just before stopping. Can anyone point me in the right
directoin with how to achieve this, or offer a tutorial. I am
really starting from scratch, and would lik eto end up with the
same clean and professional outcome.
2. regarding the same above link, when you are at the main
site, and then you click the michael mundy' link, what is it that
happens, is it a new html popup page that opens of specified
dimensions and the embedded swf is set to stretch to maximum
width/height? or is it a lone swf that pops up (with no html page)?
or is that impossible?
Many Many Many thanks in advance,
Cheska

I hope there might be some simple way to do this and waiting for experts to reply.
Try the below query.
SQL> select * from random_numeral;
NUMERALS
         1
         2
         3
         4
         5
         6
        56
        85
        24
        11
       120
NUMERALS
       114
       100
       140
14 rows selected.
SQL> select a.numerals ||' / '||b.numerals||' / '||c.numerals from
2          (select numerals,rownum rn1 from
3          (
4              select numerals,mod(row_number() over(partition by 1 order by numerals),3)
5              from random_numeral
6          )
7          where rn=1) a,
8          (select numerals,rownum rn1 from
9          (
10              select numerals,mod(row_number() over(partition by 1 order by numerals),3)
11              from random_numeral
12          )
13          where rn=2) b,
14          (select numerals,rownum rn1 from
15          (
16              select numerals,mod(row_number() over(partition by 1 order by numerals),3)
17              from random_numeral
18          )
19          where rn=0) c
20 where   a.rn1=b.rn1(+)
21 and b.rn1=c.rn1(+)
22 /
A.NUMERALS||'/'||B.NUMERALS||'/'||C.NUMERALS
1 / 2 / 3
4 / 5 / 6
11 / 24 / 56
85 / 100 / 114
120 / 140 /
SQL>Cheers,
Mohana

How to achieve this specific drop shadow effect?

Dear all,
Does anybody know how to achieve this specific drop shadow effect in InDesign: a step by step instruction, a plugin, etc?
Regards,
Kasyan

Kasyan,
I generally just use the basic feather. I draw the object with a few clicks of the pen, fill with whatever color, set the tint if desired, then use settings more or less as below.
Mike

How to achieve this Effect?

Hey everyone i was wondering if you guys had any idea how to achieve this effect in flash.....http://www.youtube.com/watch?v=QftcJtvLr8g

While you could probably do this in Flash, it is much more simply done using AfterEffects. There's a splendid text tool that can be tortured into effects like this. Have a look at the podcasts from Creative Cow on AfterEffects for some interesting examples.

Does anyone know how to achieve this in Photoshop? Any help is appreciated, thanks.

Hello,
I'm relatively new to Photoshop so if you know how to do this, please explain by telling me where I click. E.g. File>Open
Does anyone know how I would achieve this exact effect in Photoshop in the image above (without the circular logo)? The 2 light blue type of effects, one at the top of the image, the one at the bottom of the image. I don't know how to achieve this effect, please show me if you know how. I'm using Photoshop CS5.
I have looked through hundreds of tutorials, none provide me any clue as to how this is achieved.
Or does anyone know a tutorial on how this effect is achieved?
Thank you for your help.

Yes, it would have been faster and more constructive to point out exactly where to find information rather than scold you.
Check out the Option bar that one gets under the Menu bar. If it is not showing, go to windows>Options.
More info: http://helpx.adobe.com/photoshop/using/tools.html#using_the_options_bar
If you select the brush tool, you will notice a flow value, that you can lower; and a Mode drop down list.
paint tool options: http://helpx.adobe.com/photoshop/using/painting-tools.html#paint_tool_options
Set the mode to Linear Dodge, then for the next stroke set it to lighten.
Blending modes explanations with links about their effects http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-77eba.h tml
Have fun learning Photoshop!

In graph at the a particular value (threshold value) in Y-axis horizontal line have to display like a alert for the user. How to achieve this? (In WebI)

How to achieve this in WebI?

Just create a measure for it. Here's an example in E-Fashion:
This is Sales Revenue for 2006; all I've done is added a new measure called "Target", which is just:
=900000
The chart is a combined chart. The Z Axis scale wasn't the same as the Y so I manually changed it to hard coded minimum and maximum values - you get the idea.
HTH
NMG

How to invoke business process from sap xi?

Hi...
Please tell "How to invoke business process from SAP UI's."

Hi...
How to invoke business process from SAP UI's. (Eg: To trigger a process after creating an invoice)

I have been sent an email saying my podcast was accepted and will be up on iTunes in a few hours. That was 5 hours ago. How long should this process take?

I have been sent an email saying my podcast was accepted and will be up on iTunes in a few hours. That was 5 hours ago. How long should this process take?

There's no fixed time. If it's been accepted - presumably you've been given a URL? - it should appear reasonably soon. However it can dake some days before it turns up in the search results. The podcast image, if you have one, may also take some days to appear.

Vista x64, Dell Laptop Lately I have been getting audio ads from Lysol etc which I can stop by deleting the process plug-in container Iknow how to delete this process but why does the audio ad run despite the application of two well known antivirus progs?

Vista x64, Dell Laptop Lately I have been getting audio ads from Lysol etc which I can stop by deleting the process plug-in container Iknow how to delete this process but why does the audio ad run despite the application of two well known antivirus progs?

Oh, PLEASE IGNORE the line:
deleted everything under HKLM\SYSTEM\CurrentControlSet\Enum\Root\SYSTEM (folders 0000 to 0004)
That was left there inadvertedly. Can't seem to find the edit button here...

How to achieve this process in SAP SD module??

Similar Messages

Maybe you are looking for