How to activate all standard datasources..

Hi Experts,
i am phasing issue in DM1 system. All standard data sources are goes to deactivate stage as shown in the below screen shot.
if anybody has known the solution please let me know..
Best Regards,
Sowjanyak.

Hi,
Before activating Data sources in Rsa5.
Did u check Prerequisites :
Installing DataSources - SAP Documentation
http://help.sap.com/saphelp_srm2007/helpdata/en/5c/82cc3138754e81ab2ffde7e6fd89e4/content.htm
Thanks.

Similar Messages

How to activate a CRM datasource and also to enhance

Hi experts
1. can somebody guide me how to activate a CRM datasource like in R/3 we do it in RSA5 and check it in RSA6
do we have to do the same and also any additional steps need to be performed for adapters.
2. How do we enhance the CRM datasources.
can somebody guide me with steps for the both.
thanks and regards
Message was edited by:
 Neel Kamal

Hi ,
BWA1 is for maintaince of Datasource in which scenario do we use this Tcode isit only when we do the Generic datasource.
BWA1 is for all standard crm datsource maintaince
rsa2 for generic datasource
BWA5 i think we use this Tcode after RSA5 activation additionally.
yes(incase of delta)
BWA7 do we have to use this tcode along with BWA1 for standard datasources also or else only for generic datasource.
irrespective of the type of dtasource,use it if you want to load delta(you need to delta enable the datasource here)
So we don't need to put the code as we traditionally do it for R/3 , if we just mapp the fields that would bring the data for these fields.
as i told in CRM we willwrite code in BADI in case you have done enhancement
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/a-c/customer%20enhancements%20and%20userexits%20in%20bw%20-%20sap%20netweaver%20%20know-how%20network%20webinar.pdf
also chk this(credit goes to the writer)
CRm enhancement:
1. Enhance Extract Structure with the required fields. (Create & include an append structure to the extract structure via transaction RSA6).
2.a) Release the fields of the append for usage. ( To do this, double click on the Datasource and remove the flags in the column 'Hide Field' for all fields of Append).
2.b) If the new fields cannot be seen in the extract structure of the transaction BWA1 then change and save the datasource, and then activate it in RSA6.
3. Define your mappings in BADI (CRM_BWA_MFLOW) to fill these fields.
Goto SPRO . Follow the path ->SAP Implementation guide ->Implementation with other mySAP components ->Data transfer to the Business Information Warehouse-> Settings for the application specific datasources (CRM)->Settings for BW adapter-> Badi :BW adapter :Enhancement of datasources in messaging flow.
4. Replicate the new Datasource to BW.
5. Expand the Communication Structure in BW.
6. Maintain transfer Rules for the new Datasource.
7. Activate the trasfer rules and perform the upload.
Refer to the SAP Note 692195 for more info (Question 4 to be specific).
Cheers,
Swapna.G
Message was edited by:
 swapna gollakota
Message was edited by:
 swapna gollakota

Activate all the datasources in source system

Hi,
We are in the process of transporting from one development server to another development server.
In the new development server we replicated all the datasources. But, all of them has come as modified version.
How to activate all of them once rather than going for one by one?
We checked some of the R3 datasources as well. Those are perfect.
Please send an immediate response.
Thanks in advance!
lasitha.

Hi,
Use the abap program RS_TRANSTRU_ACTIVATE_ALL and give the source system name.
Hope this helps
janardhan KUmar

How to activate all inactive objects for current user

Hi
How to activate all inactive objects for current user ...
... I have found a (long winded) way to do this:
- Environment / Inactive Objects
- Add to Worklist
- Display Worklist
- Select All
- Activate
this will open a dialog titled "Inactive Objects for <username>"
which has the exact functionality I need ... but I can't figure out how to get to this dialog directly - without so many intermediate steps
the SAP docs repeatedly mention the ability to activate the inactive worklist - but do not mention how
does anybody know the TCode for this dialog?
thanks
ps does the term "mass activation" apply to importing change requests rather than development activation?
Edited by: FireBean500 on Jun 4, 2010 11:07 PM

No other way. But usually it's far more simple as all objects are already in our own worklist.
I wonder why your objects are not already in your worklist, as everytime you create or maintain an object, it is added to your worklist.

How to see all standard report in sap pm

hi
urgent
can somebody tail me
how to see all standard report in sap pm

hi
manoj
youcan see all the reprts in sap
in trs SAP1
OF ALL MODULES
YOU REQUIRE ANY Ifurther information mailme back

How to activate a custom datasource of a view

Hello folks,
I'm working on BI 7.0 and ECC 6.0.
I've created a z datasource on a view. It appears in RSA6. It is not visible in RSA5 which means I cannot activate it. When I replicate the datasource in BW, it appears as a modified version and not as an active one. How do I activate this z datasource? Please note that I'm working on BI 7.0 and ECC 6.0. I would appreciate it if someone could throw light on this one.
Thanks
BG

data: wdevent TYPE REF TO CL_WD_CUSTOM_EVENT.
wd_this->CREATE_A ( exporting wdevent = wdevent ).
wd_this->CREATE_B ( exporting wdevent = wdevent ).

How to transport a standard datasource from sap to biw?

hi friends,
I have one standard Datasource which is extracting data from a function module.
But if we see that Data source thr RSO2 then ,there a msg comes with 'Extraction from function module' with some name.
and i saw that function module separately thr se37.
but in RSO2 , i din find that function module name in this Datasource.
so anybody pls tell me how this datasource works and what can i do if i want to transport this data source to BIW?
pls help me out...

Hi Manisha,
You posted this under an ABAP forum, you should have posted it under a BI-forum.
You don't transport from SAP to BI, you just replicate from within BI. (ask you BI consultant).
regards, André

How to activate the standard workflow :ws10000051

hello,experts
    here is my problem:
    I want to activate the standard workflow for document parking :ws10000051 .
     I have already activate the event type linkage in SWE2.
    And then , i maintian obwa , obwj , obwb, obwc, obwd.obwe,obwf.
     In obwa,i choose posting release , subworkflow is ws10000055.
    In obwe, Swf amnt rel is ws10000052.
    In obwf , the org object is the position cfo (myself), before i assign this ,i create a position in ppoce.
   But, when i use f-65 to park a document , i can't receive any workflow in sbwp. I also find "the status of Document Parking (Frame), Parallel is error " in my outbox.
   Can anyone tell me the reason ?
   Thanks !

hi ,hari,
    you are right . when i check swel ,i found ws10000051 : evnet put in the queue . more detail message said :The OPEN_DI of BTE 00002214 could not determine any function modules.
when i check the workflow log (view with technical details), the activity :' determine subworkflow for amount release of document etermine subworkflow for amount release of docu ' status error . the message said :error in workflow customizing for document parkig (transaction obwe).
i don't understand this , because i have already maintian obwe. i made a new entry,like this:
wrkf :1000   (workflow name)
apth: 1000   (workflow approval path)
ammont to : 9999999
crcy: eur
wsf amnt rel :ws10000052
so ,could you tell me more details about this problem ,
thanks

How to activate all these functionalities

Hi,
I am on ECC 6.0 but not seeing following buttons, icons or processing options. These fucntionalities are listed as availble in ECC 6.0 but not able to trace them.. Let me know how to activate and/or locate them.
1. "Felxible Specs" pushbutton on Results Recording screen
2. On Results Recoring screen menupath Extras > Transfer Log for copying Inspection Results. Under Extras I see Error Messages list and then next option is Inspector, Date and TIme but no 'Tranfer Log' oeption which is I suppose should appear in between these two options.
3. Audit management transaction
4. Stability study transaction
5. Work overview for quality inspector like a cockpit
6. Flexible reporting - QMevaluations grahic display
Thanks

Hi ,
Please follow the given below link.
http://help.sap.com/erp2005_ehp_03/helpdata/en/42/fbded750e61febe10000000a422035/frameset.htm
Regards,Kundan

How to activate all enhancement spots

Hi,
I am working in upgradation project.
After upgrade system there are so many enhancementspots not activated.
so i need to do manually each one.
Is there any program to activate all enhancementspots.
your responses will be appreciated.
regards,
masha

Hi,
Activating all the enhancem,ent spots may cause problems in your system because some enhancements may not be working properly. If you activate those the transactiona may get affected. So it is better that you activate the required ones only manually.
Also refer:
http://help.sap.com/saphelp_nw2004s/helpdata/en/5f/103a4280da9923e10000000a155106/content.htm
Regards,
Renjith Michael.

How to remove all standard SOAP content like Content-ID:, Content-Description

Hi ,
can you please let me know how to remove standard SOAP content from messages
I am posting below text file via SOAP adapter:
POST /hapld/tos/kdwhapltos HTTP/1.1
Host: www.pld.ups.com
Content-type: multipart/mixed; boundary=BOUNDARY
Content-length: 719
--Boundary
CA12345 *qweru* wefgh*
--Boundary--
But below content automatically added into a messages even I am using don’t use SOAP envelop ,I don't want to keep all below information in my messages content
Content-ID:<[email protected]>
Content-Type:text/xml; charset=utf-8
Content-Disposition:attachment;filename="[email protected]"
Content-Description:SOAP
<SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'><SOAP:Header><sap:Main xmlns:sap='http://sap.com/xi/XI/Message/30'
versionMajor='3' versionMinor='1' SOAP:mustUnderstand='1'>
<sap:MessageClass>ApplicationMessage</sap:MessageClass><sap:ProcessingMode>synchronous</sap:ProcessingMode>
<sap:MessageId>72232e3c-9d7a-11e3-a92f-00000086498a</sap:MessageId><sap:TimeSent>2014-02-24T17:38:17Z</sap:TimeSent>
<sap:Sender><sap:Party agency='http://sap.com/xi/XI' scheme='XIParty'></sap:Party><sap:Service>DE2CLNT200</sap:Service></sap:Sender>
<sap:Receiver><sap:Party agency='http://sap.com/xi/XI' scheme='XIParty'>UPS</sap:Party><sap:Service>PLD</sap:Service></sap:Receiver><sap:Interface namespace='urn:mt.com:A:FWD:Transportation'>UPSPLD_In_A</sap:Interface></sap:Main><sap:ReliableMessaging xmlns:sap='http://sap.com/xi/XI/Message/30' SOAP:mustUnderstand='1'><sap:QualityOfService>ExactlyOnce</sap:QualityOfService></sap:ReliableMessaging><sap:System xmlns:sap='http://sap.com/xi/XI/Message/30' SOAP:mustUnderstand='1'><sap:Record namespace='http://sap.com/xi/XI/Message/30/general' name='interfaceDeterminationGUID'>69e207999d7a11e3c20e00000086498b</sap:Record><sap:Record namespace='http://sap.com/xi/XI/Message/30/general' name='syncTimeout'>1200000</sap:Record><sap:Record namespace='http://sap.com/xi/XI/Message/30/general' name='senderAgreementGUID'>204a48791a5c30188698c82c7a5ac51f</sap:Record></sap:System><sap:DynamicConfiguration xmlns:sap='http://sap.com/xi/XI/Message/30' SOAP:mustUnderstand='1'><sap:Record namespace='http://sap.com/xi/XI/Message/30/routing' name='InterfaceDeterminationHash'>76ffb8570fb621f090b46490ec701f6a</sap:Record><sap:Record namespace='http://sap.com/xi/XI/Message/30/general' name='senderAgreementGUID'>204a48791a5c30188698c82c7a5ac51f</sap:Record></sap:DynamicConfiguration><sap:HopList xmlns:sap='http://sap.com/xi/XI/Message/30' SOAP:mustUnderstand='1'><sap:Hop timeStamp='2014-02-24T17:38:17Z' wasRead='false'><sap:Engine type='AE'>af.di3.ch00vdi3s</sap:Engine><sap:Adapter namespace='http://sap.com/xi/XI/System'>XIRA</sap:Adapter><sap:MessageId>72232e3c-9d7a-11e3-a92f-00000086498a</sap:MessageId></sap:Hop><sap:Hop timeStamp='2014-02-24T17:38:18Z' wasRead='false'><sap:Engine type='AE'>af.di3.ch00vdi3s</sap:Engine><sap:Adapter namespace='http://sap.com/xi/XI/System'>XIRA</sap:Adapter><sap:MessageId>729468d1-9d7a-11e3-8cb7-00000086498a</sap:MessageId></sap:Hop></sap:HopList></SOAP:Header><SOAP:Body><sap:Manifest xmlns:sap='http://sap.com/xi/XI/Message/30' xmlns:xlink='http://www.w3.org/1999/xlink'><sap:Payload xlink:type='simple' xlink:href='cid:[email protected]'><sap:Name>MainDocument</sap:Name><sap:Type>Application</sap:Type></sap:Payload></sap:Manifest></SOAP:Body></SOAP:Envelope>Content-ID:<[email protected]>
Content-Disposition:attachment;filename="MainDocument.txt"
Content-Type:multipart/mixed; boundary=BOUNDARY
Content-Description:MainDocument

Hello Amit
I have tried that option but main problem is that I don’t want below content that generated By XI after SOAP Envelope, is it any way to remove below content
Content-ID:<[email protected]>
Content-Disposition:attachment;filename="MainDocument.xml"
Content-Type:application/xml
Content-Description:MainDocument
Regards,
Amit

How to activate business coontent datasources in r/3 system

Hi Experts,
Could any one please provide me the steps for installing business content data sources in R/3 system ,
I am installig PM
Thanks in Advance,
Nitya

Hi,
You could try this,
1) Go to tcode RSA1
2) Click on the BI Content link in the left navigation bar
3) Click on the Packages link in the left navigation bar
4) Find +Business Content: RPM (Resource & Program Management)
5) Expand folder to MultiProvider and double-click on 0RPM_MP01
6) In right-navigation pane, select Grouping > In Data Flow Before and After (this will take several minutes to complete)
7) Expand folder to 0RPM_MP01 > InfoObject
8) Uncheck all items that have a green square under Active Version Available (hint: these are the only items that are checked that you should be able to deselect or uncheck)
9) Repeat for InfoArea, InfoCube and Query Elements (the only one that may already be installed in your case is the InfoArea)
10) Repeat Steps 5-9 with the exception that you'll be doing InfoCubes now by expanding the InfoCube folder and double-clicking on all of the InfoCubes except 0RPM_C01.
Regards,
Kiran

[Forms 10] How to activate all buttons in a details block?

Hi,
I have a details block based on products. (10 lines)
I have a block_buttons with a button on the same canvas.
I set the block_buttons number of records to 10 so that the buttons and the records are aligned.
[prodno] [button] <-- active
[prodno] [button] <-- disabled
[prodno] [button] <-- disabled
[prodno] [button] <-- disabled
[prodno] [button] <-- disabled
At the moment only the first button is active.
The 9 buttons under it are disabled.
I can't find if I have to set a property or to write code to enable the 9 buttons under the first one.
Thanks for your help.

Hi,
I have managed to get the buttons list to be actve.
I have created a testbuttons table with a chkbx column.
I added a checkbox list to the block.
The button can't be a database item, but the checkbox can.
Then if I execute_query on that block all items are activated.
Now I'll try creating a PLSql table on the client side and try using it as support for the control block.

How to Activate personalization

Hi,
All personalizations are Deactivated in the instance.
We can activate personalization on 1 screen at a time using Functional Administrator.
How to activate all personalizations at a user or site level all at once?
Thanks,
Kamath.

Kamath,
Set the value of the profile option "Disable Self-service Personal" to No.
Thanks
Anoop

How to enable all options under "Text Edits"

Hi,
How to activate all options under "text edits" see screenshot.

Hi,
I discovered, these options are not enabled for scanned PDF files.
Thank You

How to activate all standard datasources..

Similar Messages

Maybe you are looking for