How to activate Bluetooth

Hy.
I have HP Pavilion g4 1357-TX, with Windows 7 Ultimate Edition 32 bit, Intel Core i3-2330M and 2GB memory.
To the point, how to activate Bluetooth in this notebook ?
Maybe it sounds silly or stupid to you, but I reall have no idea about this.
Need your help.
Thanks !!
This question was solved.
View Solution.

Consumer models generally use HP Wireless Assistant, but I was not able to find this exact model on the consumer support site for some reason.
As a result, I found the HP Connection Manager on the business support center. It essentially accomplishes the same tasks as HP Wireless Assistant in the consumer models. Install it using the link below.
http://goo.gl/9hx5e
It is strange the F12 key is not enabling and disabling wifi and bluetooth simultaneously. My consumer model notebook's F12 key turns my wifi and Bluetooth off and on. Apparently the same design decisions are not used across all consumer notebooks.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

  • How to activate bluetooth on iphone 5s

    how to activate bluetooth on iphone 5s

    try this one also. . thanks
    Personal Hotspot
    Use Personal Hotspot to share your iPhone Internet connection. Computers can share your
    Internet connection using Wi-Fi, Bluetooth, or a USB cable. Other iOS devices can share the
    connection using Wi-Fi. Personal Hotspot works only if iPhone is connected to the Internet over
    the cellular data network.
    Note: This feature may not be available with all carriers. Additional fees may apply. Contact your
    carrier for more information.
    Share an Internet connection. Go to Settings > Cellular and tap Set Up Personal Hotspot—if it
    appears—to set up the service with your carrier. Chapter 3 Basics 34
    After you turn on Personal Hotspot, other devices can connect in the following ways:
    • Wi-Fi: On the device, choose your iPhone from the list of available Wi-Fi networks.
    • USB: Connect your iPhone to your computer using the cable that came with it. In your
    computer’s Network preferences, choose iPhone and configure the network settings.
    • Bluetooth: On iPhone, go to Settings > Bluetooth and turn on Bluetooth. To pair and connect
    iPhone with your device, refer to the documentation that came with your computer.
    Note: When a device is connected, a blue band appears at the top of the iPhone screen. The
    Personal Hotspot icon appears in the status bar of iOS devices using Personal Hotspot.
    Change the Wi-Fi password for iPhone. Go to Settings > Personal Hotspot > Wi-Fi Password,
    then enter a password of at least 8 characters.
    Monitor your cellular data network usage. Go to Settings > Cellular. See Cellular settings

  • How to activate Bluetooth using wireless switch on dell inspiron 15-3542

    1- when i try to install dell WLAN and Bluetooth driver, it appear " activate bluetooth using wireless switch". My laptop"Dell inspiron 15-3542 run on windows 7 x64 .
    2- i need PCI driver

    Try this one Windows 8.1×64: 
    http://ftp.us.dell.com/FOLDER02013131M/1/Network_Driver_HP06Y_WN_10.0.0.276_A00.EXE10.0.0.276

  • How to activate bluetooth permanently?

    Hello
    I have a Libretto U100 and I would like to activate bluetooth permanently, but at the moment each time I reboot it is always turned off.
    The result I want is that wifi & bluetooth be turned on at all times.
    Thank you for your help.

    Hi
    Like you can see sometimes you must wait for some answer or suggestion. ;) Maybe is Libretto forum not so active like other areas. While you wait you can check users annuals to see if you can find something there.
    Anyway, I am not technician but as far as I know you should leave WLAN switch permanent to ON position and before you want to use BT just check with FN+F8 key combination if the BT is enabled. I think that BT can not be permanent ON.

  • How to activate Bluetooth in Tecra A4?

    Hi
    I just format my Tecra with the recover DVD, and I cant activate my Bluetooth. When I do Fn+F8 and when I select the Bluetooth device, nothing happens. This model have Bluetooth, and also arrives now from warranty, where the test of Bluetooth in the report its ok...
    Can you help me please?
    Thank you

    Start "Bluetooth Settings" of the Bluetooth program folder to turn your Bluetooth stack on.
    Please check also your configuration which is described on the following website:
    http://aps.toshiba-tro.de/bluetooth/redirect.php?page=pages/faq/bluetoothnotworking.html

  • How To Get and activate bluetooth..

    My  hp Product number:  E4R28EA#A2N
    Serial number: {Personal Information Removed}
    HP Pavilion 15-e040sx Notebook PC
    I want to send my files to mobile via bluetooth.. So I dont know where to get  and and activate bluetooth..
    Please help me to nstall and activate n my windows 8.1 notebok.

    Hi,
    Please use the followingtutorial:
       http://h30434.www3.hp.com/t5/Notebook-Hardware/How-do-I-activate-Bluetooth-in-Windows-8/td-p/2389425
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How activate bluetooth manager on Satellite P200-1C7

    I have installed a bluetooth dongle on my Toshiba Satellite P200- 1C7 so I have downloaded bluetooth manager and bluetooth stack.
    Or when I tried to use bluetooth manager it said that it remains 25 days of evaluation.
    So I wanted to know how activate bluetooth manager?
    If it's not possible, someone can tell me what software can I use (bluesoleil doesn't work).
    Thank you very much for your reply.

    Hi
    The Toshiba Bluetooth stack on the Toshiba website is customized and designed for Toshiba notebooks.
    You should use the Bluetooth stack which is customized for your notebook. Then you would not need to activate any BT.
    But listen dude; your Satellite P200- 1C7 seems to be NOT equipped with the Toshiba internal BT module!
    Therefore you would need to switch to another external solution.

  • How to connect iphone 5 with ipad 2 using Bluetooth? When  I activate Bluetooth both devices search but not listing each other to pair or connect.

    How to connect iphone 5 with ipad 2 using Bluetooth? When  I activate Bluetooth both devices search but not listing each other to pair or connect.

    You can use Photo Transfer App to transfer photos from iPhone to iPad or vice versa using Bluetooth or WiFi
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/3dd129795daebebc4b8 741b057f5f70d.jpg
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/3af5c541040e15e3f6b 3356e4c55cbfc.jpg

  • How activate Bluetooth ? I cant join my iPhone with another iPad or iPhone

    How activate Bluetooth ? I cant join my iPhone with another iPad or iPhone

    The Bluetooth is meant for earplug, headset, keyboard, car hands-free set and speakers.
    You need 3rd party apps to do file transfer.

  • How to activate wifi on my iphone 4s after upgrading to ios 6 ..... wifi button get grayed ???

    how to activate wifi on my iphone 4s after upgrading to ios 6 ..... wifi button get grayed ???

    See:iOS: Wi-Fi or Bluetooth settings grayed out or dim
    It is frequently a hardware problem and an appointment at the Genius bar of an Apple store is in order.

  • Activate bluetooth using Wireless Switch?

    I'm getting really frustrated now because my laptop seems to have forgotten that a thing called Bluetooth exists. I noticed the bluetooth wasn't working so I tried to install the newest driver but it fails to install saying I need to "Activate bluetooth using Wireless Switch". As far as I can tell this means pressing fn+f2 which turns on/off the wifi and blutooth but this does nothing and besides that is always on.
    Next I went to mobility center and found this: .
    Bluetooth appears to be on but I still can't connect anything with it or install the latest driver. When I click launch it takes me to my PC settings in which there is nothing about bluetooth. Search bluetooth yields two results: set up a connection or network and turn on or off wireless devices. Under wireless devices there are only two settings, airplane mode and wi-fi. Under Set up a connection everything is related to LAN and Wi-Fi, nothing about bluetooth. 
    If I go to services.msc I find this:  So bluetooth defintiely exists in some form but for some reason I just can't access it and it can't pick up bluetooth devices. Someone please tell me I'm an idiot and I'm missing something obvious, please I've been at it for an hour. 

    Hi,
    If you still haven't been able to resolve this, have you tried physically removing the card, deleting all the drivers, etc., rebooting the system, and after that shutting down.  Then physically reinstall the card, either let Windows find the drivers or install them yourself, and see if it straightens out the issue?
    You can also check Microsoft's article on troubleshooting bluetooth issues.  
    Other than that, honestly I'm not sure what you may have missed.  Let me know if you've resolved the issue (and if so, how, so that others with the same problems can find your solution).  If not, like I said, physically remove the card and uninstall the drivers to see what happens.
    Hope this helps.
    Todd

  • How to Activate the Table which Doesn't Exist - Can I create Table in SE11

    Hi Gurus,
    I am a BASIS Person ..so, I don't have much idea about ABAP Developement side . But, while applying patches to one of  the SAP Component, I get the following error message ( usr\sap\trans\log ) :
    Phase Import_Proper
    >>>
    SAPAIBIIP7.BID
    1 ED0301 *************************************************************************
    1 EDO578XFollowing objects not activated/deleted or activated/deleted w. warning:
    1EEDO519X"Table" "WRMA_S_RESULT_DATA" could not be activated
    1EEDO519 "Table Type" "WRMA_TT_UPDTAB_DSO" could not be activated
    1 ED0313 (E- Row type WRMA_S_RESULT_DATA is not active or does not exist )
    2WEDO517 "Domain" "WRMA_KAPPL" was activated (error in the dependencies)
    2WEDO517 "Data Element" "/RTF/DE_FISCPER" was activated (error in the dependencies)
    2WEDO517 "Data Element" "/RTF/DE_FISCVARNT" was activated (error in the dependencies)
    2WEDO517 "Data Element" "WRMA_DE_RCLASV" was activated (error in the dependencies)
    2WEDO517 "Data Element" "WRMA_DE_RMA_AMNT" was activated (error in the dependencies)
    2WEDO517 "Data Element" "WRMA_DE_RMA_INV" was activated (error in the dependencies)
    2WEDO517 "Data Element" "WRMA_DE_RMA_OBJ" was activated (error in the dependencies)
    2WEDO549 "Table" "V_WRMA_TRCLASVER" was activated (warning for the dependent tables)
    2WEDO549 "Table" "V_WRMA_TRCLASVPE" was activated (warning for the dependent tables)
    2WEDO549 "Table" "V_WRMA_TRCLPERCL" was activated (warning for the dependent tables)
    2WEDO549 "Table" "WRMA_S_STOCK_SELECTION_DATE" was activated (warning for the dependent tables)
    <<<
    Now, I checked Domain WRMA_KAPPL  in SE11 and it diplays that it is partially active :
    " The obeject is marked partially active for the following reasons :
       Errors occured when adjusting dependent Objects to a change. Some of the dependent objects could not
       be adjusted to this change. To adjust the dependent objects, you must perform the following actions
       the next time you activate this object.
                        - SET THE SYNP TIME STAMP IN THE RUNTIME OBJECT OFALL DEPENDENT OBJECTS
    My question is - how to activate this SYNP Time Stamp.. ?
                          - Once I activate this SYNP Time Stamp.. How do I activate this ..in SE11 or some other
                            TCode..
    Any / ALL Help is highy appreciated and would be rewarded with appropriate Reward Points.
    Thanks,
    Regards,
    - Ishan
    >> Ok, Now I forcefully activated the Domain and then all the 5  Data Elements in SE11 ...now I have error
         that table  WRMA_S_RESULT_DATA  and WRMA_TT_UPDTAB_DSO Could not be activated...
         ..And in SE11 > Input the first / Second Table  > Excute > Output : Table Does not Exist !!!
          - Now, How do I activate something which does not exist in the first place ?
        Any Input about this ?
    Thanks,
    Regards,
    - Ishan
    Edited by: ISHAN P on Jun 19, 2008 3:44 PM

    Read note 1152612 - Incorrect component type in structure WRMA_S_RESULT_DATA.
    The error occurs in Release BI_CONT 703 Support Package 9.
    If you require an advance correction for Support Package 9, make the following manual changes if the InfoObject 0TCTLSTCHG is inactive in your system.
    1. Use transaction RSA1 to call the Data Warehousing Workbench.
    2. Check whether the InfoObject 0TCTLSTCHG was already activated by the compilation process the first time you called transaction RSA1.  You can use transaction RSD1 to check this by entering 0TCTLSTCHG in the "InfoObject" field and choosing "Display".  Proceed as follows if the InfoObject is still not active:
    3. Go to BI Content activation.
    4. Select "Object Types".
    5. Open the "InfoObjects" tree and select "Objects".
    6. Search for the InfoObject 0TCTLSTCHG and select it.
    7. Transfer the object and activate it.
    These steps activate the required component type /BI0/OITCTLSTCHG. You can check again in transaction RSD1 to ensure that the InfoObject 0TCTLSTCHG is available as active.
    Jacek Fornalczyk

  • How to activate the ATP buckets in APO?

    Hi,
    We are in the process of changing the ATP buckets in our APO system.
    I know the Path in the configuration:
    Advanced Planning and Optimization -> Global Available-to-Promise (Global ATP) -> General Settings -> Maintain Global Settings for Availability Check
    On the left side you will get three sections:
    Global Settings
    ATP Buckets (Active)
    ATP Buckets (Planned)
    I can change the values in (example field Shift Receipt Bucket) the ATP Buckets (Planned) section and save it with a transport. Now the question is how to activate the buckets. Is there another transaction for this? SAP Help doesn't specify how to activate.
    Any ideas are highly appreciated.
    Thanks,
    Mahesh

    Hi,
    To activate the buckets one need to check the box 'Current' in the options under ATP Buckets (Active). Also, as referred earlier by Dipthi do look up the documentation under:
    SAP Advanced Planning and Optimization (SAP APO) -> Global Available-to-Promise (Global ATP) -> Settings for Global ATP -> General Settings for Global ATP ->Definition of Buckets for ATP Time Series ->Activation of Bucket Parameters for ATP Time Series.
    The details are as beneath:
    Use
    If you change bucket parameters (see Definition of Buckets for ATP Time Series), these must be activated subsequently for the ATP time series.
    Features
    The system activates the bucket parameters in the following situations:
    Since activation in each of the situations described below leads to downtime, you should change bucket parameters less frequently than other Customizing settings.
    ·        Creating the active planning version for a client using transaction /SAPAPO/MVM
    If you set up a system again, you should process the bucket parameters before you create the active planning version. The bucket parameters are thus activated automatically.
    ·        Initializing SAP liveCache for all clients using transaction LC10
    In the case of an upgrade, you should process the bucket parameters before activating SAP liveCache. The bucket parameters are then activated automatically.
    ·        Executing the report /SAPAPO/OM_ATP_REBUILD_TS
    The system only rebuilds the ATP time series here.
    In this case, the SAP liveCache administrator must execute the following steps:
                                a.      Shut down SAP liveCache.
                                b.      Replace the com-file registration:
                                                      i.       At command line level, go to the SAP subdirectory of the SAP liveCache installation.
                                                    ii.       Under Microsoft Windows, save the original registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst), for example, by renaming or copying to another directory.
                                                   iii.       Under Microsoft Windows, rename the registration file SAPAPO_REBUILD.lst as SAPAPO.lst (UNIX: libSAPAPO_REBUILD.lstas libSAPAPO.lst) or copy it to another directory.
                                                   iv.       Under Microsoft Windows, rename the registration file SAPATP_REBUILD.lst as SAPATP.lst (UNIX: libSAPATP_REBUILD.lstas libSAPATP.lst) or copy it to another directory.
                                c.      Launch SAP liveCache.
                                d.      Execute the report /SAPAPO/OM_ATP_REBUILD_TS.
                                e.      Shut down SAP liveCache.
                                  f.      Replace the com-file registration by replacing the registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst) with the original versions under Microsoft Windows.
                                g.      Launch SAP liveCache.
    Regards
    Vinod

  • How to activate all inactive objects for current user

    Hi
    How to activate all inactive objects for current user ...
    ... I have found a (long winded) way to do this:
    - Environment / Inactive Objects
    - Add to Worklist
    - Display Worklist
    - Select All
    - Activate
    this will open a dialog titled "Inactive Objects for <username>"
    which has the exact functionality I need ... but I can't figure out how to get to this dialog directly - without so many intermediate steps
    the SAP docs repeatedly mention the ability to activate the inactive worklist - but do not mention how
    does anybody know the TCode for this dialog?
    thanks
    ps does the term "mass activation" apply to importing change requests rather than development activation?
    Edited by: FireBean500 on Jun 4, 2010 11:07 PM

    No other way. But usually it's far more simple as all objects are already in our own worklist.
    I wonder why your objects are not already in your worklist, as everytime you create or maintain an object, it is added to your worklist.

  • I  bought an ipod touch 5 from Dubai carrefour. Th seller told me that the ipod that ı bought has a facetime . But when ı want to activate ipod ı couldnt see the facetime app. Please show me how ı could activate facetime.

    I  bought an ipod touch 5 from Dubai carrefour. Th seller told me that the ipod that ı bought has a facetime . But when ı want to activate ipod ı couldnt see the facetime app. Please show me how ı could activate facetime.

    If FaceTime is not hidden by Restrictions (Settings>General<Restrictions) you got duped. iPods officially sold in Dubai and some other countries that prohibit FT do not have FT and there is not way to get FT on those iPods.

Maybe you are looking for