How to activate business content for 0TCA_DS01

I need to set up authorizations in netweaver BI using the following objects:
0tca_ds01
0tca_ds02
0tca_ds03
0tca_ds04
0tca_ds05
I've looked at trxn RSA5 in our HR system, but I'm not able to identify the datasources that feed the 0tca_ds0* objects. What are the HR datasources for these objects?
Thanks,
Den

I put my thoughts in here..
For any Analysis authorizations (HR & CO) currently available -prerequisite is extractor available in R/3.
To my knowledge the only available extractors for HR are
0HR_PA_2 HR Structural Authorizations- Values
0HR_PA_3 HR Structural Authorizations - Hierarchies
and the relative DSO for aforementioned DS are -
0PA_DS02 and 0PA_DS03.
I would like SAP to answer the same.
CO -
the datasource available is 0CO_OM_CCA_USER1.
A complete scenario is available. Transfer the content objects: 0CO_OM_CCA_USER1 (DataSource and InfoSource), as well as the DataStore objects including update rules 0CCA_001, 0CCA_002, 0CCA_003.
Hope it Helps
Chetan
@CP..

Similar Messages

How We Install Business Content for 0PA_C01,0PY_MC02 & 0PY_C02 ??

Hi Bwers,
Can any buddy help me the above how we install the Business Content for 0PA_C01, 0PY_MC02 & 0PY_C02 (HR & Payroll)??
we have the DataSource below:
0HR_PT_2
0HR_PT_1
PA2002
If some buddy got any documents related to the above please kindly send it to my mail ID: [email protected]
full points will be awarded for any useful answers.
Many Thanks in advance
BH
Message was edited by:
Varma Bh

Hi Varma Bh
Just have a look @ the following..
BW HR Reports (Payroll)
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/15/3de338b56ccc44e10000000a11405a/frameset.htm">0PY_MC02</a>
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/22/7883373c1af326e10000009b38f8cf/frameset.htm">0PY_C02</a>
Regards
R M K
**Winners don't do different things, they do things differently**
> Hi Bwers,
> Can any buddy help me the above how we install the
> Business Content for 0PA_C01, 0PY_MC02 & 0PY_C02 (HR
> & Payroll)??
> we have the DataSource below:
> 0HR_PT_2
> 0HR_PT_1
> PA2002
>
> If some buddy got any documents related to the above
> please kindly send it to my mail ID:
> [email protected]
>
> full points will be awarded for any useful answers.
>
> Many Thanks in advance
> BH
>
> Message was edited by:
> Varma Bh

How to activate business content extractor for masterdata in ECC 6.0?

Hi Experts,
I have a small problem with the extracttor 0PS_RESPNO_TEXT in ECC 6.0?
If i try to open it in RSA2 / RSA6, it says that active version not available. When i check in the developement system, i have it as modified version.
For this problem, I hope activating this in Development and transporting to Prodction should fix.
As far as i know, activation of sap delivered extractors can be done through SBIW or RSA5. But i have not done this before.
Can anybody please help me with step by step procedure to activate this and also what are the precautions and checks that need to be preformed?
Thanks & Regards,
Asrar Ahamed MA

It depends on which BW environment has an RFC connection to the ECC environment you're activating the DataSource in. Typically, environments are paired, similar (but not always) like the depiction below:
ECC Development <-> BW Development
ECC QA <-> BW QA
ECC Production <-> BW Production
Best Practices suggest that a DataSource be activated and put on a transport in the ECC Development environment. Upon activation of the DataSource in ECC Development, replication of the DataSource in the BW Development environment can take place and Best Practices suggest putting the DataSource on a transport in BW. As the ECC transport is promoted throughout the ECC landscape, the BW transport is promoted throughout the BW landscape in order to keep them in sync.
So, if the envrionment that you've just activated the DataSource has an RFC connection to your BW Production environment, you can replicate in BW Production and if that's your standard practice, then that's the way your should do it. It's typically, however, not considered a Best Practice to be able to create, update or delete in a production environment.

BI 7 Activate Business Content Best Practice?

Guru,
Could you share your experience on how to activate business content in BI 7. In 3.x, I used to activate business content based on infosource then crate ods and infocube based on in infosource. Now in BI 7 infosource is no longer necessary. Please share your thoughts of best practice on activate business content in BI 7.
Thanks,
John
Message was edited by:
John Do

Hi,
To actiavte the objects in the BI content u can select which ever object u want and then select the collection mode as all the objects before and after....
this will ideally activate all the objects that are required for the functionin of the object that you have selected .......
In simpler way....
RSA1-> Business Contents-> Select your objects-> On the right hand side, select "automatic collection" under "collection mode" and Select "before and after data flow" -> Right Click the selected objects on the left hand side and right click -> Insert Objects for collection-> Once the selected objects comes to the right hand side, select "install" and click "install in background".
See this also....
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
Hope it helps,
Happy Life,
Aravind

How could i activate BI-Content for SPP

Hello
How could i activate BI-Content for SPP.
I only find the reoport RSBCT_BICONTENT_ACTIVATE. But it does not work for SPP
I geht the following message:
Finished starting the activation. Please check the application log with external ID BI Content Installer (SCM)
But in the sm 37 i don't find anything.
Thanks
Sven

Hi MadissonStudios.
Thanks for the time you took to try and help me out.
I can't access the link (even correcting the double '//' or the space in the link.
I've followed your sugesttion and tested it but didn't work. The hover state is always for the top layer (z order) and the hover state of the image fills over the text. If I put the text over, it covers the image. Grouping didn't make a difference.
Maybe I'm getting your indications wrong, but without access to the file, I don't see another way I could have done it any different.
Thanks once more.

How to Install Business Content Objects

Hi,
1. How to Install Business Content Objects.
2. Is there any types in Transport Request.
Thanks,
Madhu

Hi,
1. In the main menu of BI Modeling choose Data Warehousing Workbench: BI Content (Transaction RSOR). If you are already in the Data Warehousing Workbench, select the BI Content functional area by clicking on the corresponding pushbutton in the left-hand navigation window, or by choosing Goto ® Install BI Content.
You can display or hide the left navigation window of the Data Warehousing Workbench with Navigation Window On/ Off.
2. Collect the objects you want to activate and check your settings for activating BI Content with respect to Install, Match or Copy and Active Version Available.
More information: Collecting Objects
3. With Install, define how you want to install the BI Content:
Installation Type
Information
Simulate Installation
The system runs a test to see whether any errors are likely to occur during the installation. However, not all errors that may occur can be identified during simulation: Some error messages can only be generated when a real A version (not just a simulation) is available in the system. You should, therefore, only use the simulation function as a rough guide to help you identify and remove basic errors.
Install
The selected objects are installed immediately.
Install in Background
The selected objects are installed in the background.
Install and Transport
The selected objects are installed immediately and then written to a transport request.
If you have a large number of objects, SAP recommends you use the Install in Background option because installing a large number of objects can take a long time. Modifying objects that are already active can take an especially long time to complete.
Make sure that when you install objects in the background, the versions are not matched. It is always the delivery version that is installed. They are not matched
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
hope it helps.
Regards
CSM Reddy

Error InfoObject inactive while activation of Business content for cube

I am facing error "InfoObject 0COMP_CODE is not available in active version" while simulate installation of business content of cube 0FIGL_C10. Please guide me for the same.
Edited by: Nilesh Vakil on Jul 15, 2010 1:07 PM

Hi Sriniva and All,
I have been trying to activate business content- info objects catalogue, and have been gettin the below errors. I have activated ocomp-code and checked it with transaction sm37, and it says the job has finished.But i am not sure if i have to activate all the info objects thereof one by one.
EDI: Partner profile not available 1
Source system E33CLNT003: No authorization for remote activation of DataSources
Source system T90CLNT090 is inactive
Object '0CUSTOMER_ATTR BM_GIS_DAT' (ISMP) of type 'Transfer
Rules' is not a
I hope to hearing from someone soon !
-- Armstrong Kwakye

XI Business content for MDM - Syntax error in IDOC adapter

Hi mates,
I'm trying out the Master Data Harmonization scenario for Vendor data with R/3 as the client system. I'm using SAP delivered XI Business content for MDM. The mapping program is generating ADRMAS and CREMAS IDocs but the IDOC adapter reports that there is a syntax error in ADRMAS IDOC. Find below the details.
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Segment 'E1BPAD1VL', segmentnumber '000001' not correct in structure ADRMAS02</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Segment 'E1BPAD1VL', segmentnumber '000001' not correct in structure ADRMAS02</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Generated ADRMAS IDOC is
 <?xml version="1.0" encoding="utf 8" ?>
<ADRMAS02>
<IDOC BEGIN="1">
<EDI_DC40 SEGMENT="1" />
<E1ADRMAS>
<OBJ_TYPE>LFA1</OBJ_TYPE>
<OBJ_ID>0000500140</OBJ_ID>
<CONTEXT>0001</CONTEXT>
<E1BPAD1VL SEGMENT="1">
<FROM_DATE>00010101</FROM_DATE>
<TO_DATE>99991231</TO_DATE>
<NAME>Swift Transportation</NAME>
<COUNTRY>US</COUNTRY>
<COUNTRYISO>US</COUNTRYISO>
<LANGU>E</LANGU>
<LANGU_ISO>EN</LANGU_ISO>
<SORT1>SWIFT TRANSPORTATION</SORT1>
<TIME_ZONE>CST</TIME_ZONE>
<E1BPAD1VL1 SEGMENT="1">
<LANGU_CR>E</LANGU_CR>
<LANGUCRISO>EN</LANGUCRISO>
<ADDR_GROUP>BP</ADDR_GROUP>
</E1BPAD1VL1>
</E1BPAD1VL>
</E1ADRMAS>
</IDOC>
</ADRMAS02>
Strangely, the control record is blank. I looked at the XSLT program, it is coded that way. I do not understand the reason. Is the error pointing to the control record?
Look at the code sample from XSLT mapping program
<xsl:for-each select="IDOC/*/E1ADRMAS">
 <IDOC BEGIN="1">
 
 <EDI_DC40 SEGMENT="1"/>
 <xsl:apply-templates select="."/>
 </IDOC>
</xsl:for-each>
How can an IDOC w/o control record be posted?
Did anyone come across this error? Whats wrong/missing?
I appreciate ur inputs.
thx in adv
praveen

Moorthy,
I tried reloading the IDOC metadata from IDX2. Still I get the same error.
Regd, IDOC w/o control record, can u elaborate on "dynamic value while posting IDOCs". From where, XI message SOAP header with Business System replaced by corresponding logical system names?
Thanks
Praveen

Error in Installing the Business Content for 2LIS_06_INV data source

Hi Experts,
We are trying to install the Business content for 2lis_06_inv. When we replicate the datasource, we are not seeing it in 3.x version. It is only vailable in 7 version. There is no transformation available in Business content for this data source. Please let me know how we need to proceed with this installation. Should we install the 7.0 flow or 3.x flow? Please provide th details if you have implemented th same in your system. Thanks is advance.
Regards,
Kavitha Jagannath

Hi,
Follow bellow steps:
1. Goto RSA1.
2. Select the BI content.
3. Select the Grouping as' In Dataflow before and after'
Then,you can get the data flow which are haveing the DS/TR/Data targets.
4. Select the Install by setting the 'Install in background'.
Regards.

How to install Business Content of SAP BW

Hi BW guru's
Can anyone tell how to install business content in bw.
we have installed central instance , data base instance and bw component then stuck up can any one help where and how to install Business content
Thanks in advance
Regards
Srini--

Hi Srinivas,
To install and activate the business content, you can do that using RSA1 and then going to the business content tab. select the required objects and drag and drop them to the right side window. Then click on the Activate and install button to install the business content.
You can make use of the grouping option available, to install the required objects together.
Hope this helps...let me know if you need any further info on this.
Best Regards,
Nene.
Dont forget to assign the points if the answer is helpfull.

Installing business content for 0MKT_DSO1/0CRM_LEAD_H

Hi
I am getting an error whilst installing the business content for any DSO/Infocube.
Grouping
In data flow before.
Error : Rule (target: 0GN_PAR_LSY, group: 01 Standard Group): Syntax error in routine
where as same DSO whilst acitivated wiht diff source system has no errors.
Old source system 199 - No error whilst acitvation business content - (SANDBOX)
New source system 200- error whilst acitvation business content - (DEV)
If Grouping
Only necessary objects are selected above error is not there.
But when after new transfer rules have been created and when infopackage is run, i get another error
error : DataSource 0CRM_LEAD_H is not defined in the source system
Now no data loads for new source system.

Hi hungryRaj:
On your source system use Tcode RSA6 to verify if DataSource 0CRM_LEAD_H is active, if not activate it using Tcode RSA5.
Regards,
Francisco Milán.
Edited by: Francisco Milan on Aug 2, 2010 10:00 AM

Activate Business Content PP

Dear all,
We want to activate the Business Contents for extraction of the SAP module PP. For example we have already activated DataSource 2LIS_04_P_COMP and so on. Right now we are unsure which RMBW-programs and additional jobs have to be activated. Does anybody have a guideline something like this to install these Business Contents fore using PP-extraction?
Thank at all.
Best regards
Daniel

HI Daniel, try to find your PP scenario in:
[ Best Practices: SAP NetWeaver Business Warehousing - Scenarios|http://help.sap.com/bp_bw370/html/bw.htm]

How to remove Business content objects that are not required?

Hi all of you,
I had extracted some of the objects from business content from FI such as General LEdger and Asset Accounting. After extracting it, my c drive is full and I am not able to open any other file. So I want to remove these FI objects that I had extracted from Business Content. Can any one please guide as to how should I remove these already loaded Business content objects?
Thank you.
TR.

Hi,
You can right click on the objects (unused) and delete.
actually when you activate business content its version is changes from "D" Delivered to "A" Active but these objects will always be available as D version to you. Even if you delete the activated objects now & need those in future you can reactivate them.
hope it helps
Regards
Vikash

Business content for Investment Management & Travel management

Hi All,
I am trying to install Business content for Investment Management & Travel management, I found the content in 3.x flow with Infosource. once I raised with SAP they also reply with 3.5 flow. I am doubt full to build with 3.5 flow because 3.5 flow SAP support date over on 31.03.2013. SO how they will support. Please put some light if some one have any idea.
Cheers
Anil

Hello Anil,
this community deals with the SAP product 'SAP Landscape Transformation'. Can you pls. indicate in which SAP component you have the issue? I guess that the current community might not be the right one.
Best, Heike

I Activate business content data source, but ca't able to see the data in

I activate business content data source in crm 2007 , when i go to RSA3, GIVE the data source and checking data, I can not able to find the data in that ,
q1) when activating the data souce then it have data i, OR we will run any sttings for that

Thanks for reply
I did same thing , I activated the data source in RSA5, then got to RSA3 i can not able to fine data in that data source,
is there is no data in tables?
or any other problem

How to activate business content for 0TCA_DS01

Similar Messages

Maybe you are looking for