How to activate change pointers for HRMD_A message

Hi all,
I want to activate change pointers for HRMD_A message for intotypes 0001, 0002, 0006.... .
But I can't find any change object which I could use in BD52 transaction.
Is there any delivered change object by SAP for HRMD_A message?
Could you please tell me which change object should be used for example for infotype 0001?
Thanks a lot.
Petr

There seem to be a number of related questions asked and answered in the forums. Have you searched?
Rob

Similar Messages

Change pointers for custom message type

Hi All,
Please help me with questions.
1. The requirement is to add two additional fields to CSCK table and then activate change pointers for COSMAS. My question is when I activate the change pointers for COSMAS will it send this two z fields when there is a change?
2. I dont see a message type in BD50 for a standard IDOC Internal_order? Can I add that standard message type? How can I do this? WIll this create an IDOC when ever there is a change in data?
Thanks.

Hello Oscar,
1. Which changes should be relevant for creation of COSMAS-IDoc, you have to define in BD52.
2. You need to define INTERNAL_ORDER in WE20. In BD64 you add BAPI "InternalOrder.SaveReplica", filters can be added.
Best Regards, Dirk

Regarding change pointers for HRMD_A

Hi Abapers,
I need to distribute changes to HR master data to a middleware system. hence i have activated the change pointers for the message type: HRMD_A. now my idoc is populating the infotype segments whenever it is changed with all fields.
But a particular change (on an infotype) should be sent individually in two different runs of RBDMIDOC run to the middleware. Ex: Vendor A needs changes to be sent to it on a weekly basis whereas Vendor B needs changes to be sent to it on a biweekly basis. When an employee X has a change on infotype 2, this change should be sent to middleware in both instances separately in different IDOCS at different times when RBDMIDOC program is run (by capturing change pointers pertinent to the message type of the particular vendor).
What are the changes required for ALE config.? Do i need to create a new message type for vendor B and configure. Please help.
Thanks.

Hi sudarshan,
Yuo need to create Z program to trigger IDOC.
As you need to set read status of change pointer as X after yuo send it to both system.
So you need to create Z table to keep track of this whether you have send to sys a or Sys B..
If you willl not update read status in will cause performance prob.
Hope this helps.
Dhiraj.

How to create change pointers for IT6 when custom table Z777A changes?

Situation: We are using custom table Z777A (copied T777A and added fields) to store building locations. Employee's IT6 subtype 92 retrieves valid work address building locations from table Z777A.
Problem: Whenever there are updates to Z777A, we need to find all IT6 subtype 92 records that use the changed building location from Z777A and create IDOC's The change pointer entry will need to be for the IT6 subtype 92 row that is affected.
Question: Can anyone give me specific details as to how this can be accomplished? Thanks.

Hi,
MASTER DATA CHANGES DISTRIBUTION BY CHANGE POINTER TECHNIQUE:
Step 1: Creating change document object in SCDO transaction.
Step 2:Assigning tables to the change document object.
Step 3:Specifying change document items in transaction BD52.
Step 4: Activating change pointers for the message type HRMD_ABA in transaction BD50.
Step 5:Activating change pointers globally.
Step 6:Executing program RBDMIDOC in SE38, Specifying message type HRMD_ABA.
with regards,
M.Sreeram.

How to implement Change pointers for Purchase order - ME22N - Custom Fields

Hi Experts,
Can you please tell me how to implement - Change Pointer for Custom fields in IDOC.
I am working on IDOC - For purchase order - acknowledgements - in custom screen/tab in ME22N.
Everything is working fine according to my requirement.
All i need to know is the process of - Creating/Change - Change pointers for Custom fields.
1.How to implement change pointers for custom fields.
2.Can we maintain - Change Document - for custom fields at data element level?
P.S. - I have browsed many previous - forums before posting a new discussion.
please share your inputs...
explaining how to create/implement - change pointers for custom fields will help me .
Regards,
Karthik Rali.

Hi,
To maintain Change Document for custom field:
1. Check if "Change document" checkbox is set in data element.
2. Find Change Document Object for transaction.
   You can use SQL trace - ST05.
   Look there for line with table CDHDR and statement insert values
   (for example for transaction KA02 Change Document Object is KSTAR)
3. Regenerate update program for this Change Document Object in transaction SCDO
Change documents for z-fields schould be generated.
I am not sure about change pointers but they are configured somehow in BD61 and BD50.

ALE/IDOC-How to create Change Pointers for Custom Infotype

Hi,
My requirement is to transfer custom OM infotype changes using IDOCs.
But its not creating any change pointers for that infotype.
The message used is a copy of standard message OM_HRMD_A.
Can any one please help me out in this issue.
Thanks,
Sarika

Hi Sarika,
How did you solve this issue? We are also facing a similar problem, it will be helpful if you could explain how you found out the solution.
Thanks
Anu.

Activate Change pointers for TREX classification search for Business Objects

Hey all...
Does anyone out here has any idea on how to activate the change pointers for TREX classification search for business objects: - for me I am specifically doing it for Materials and Customers.
Okay, let me explain the issue: -
For TREX search, we need to schedule a background job for Delta Indexing. But Alas! Delta indexing does not capture the changes to Classification data of the business object.
For this we activated the change documents for the particular class in the customizing. But to my surprise, change documents and change pointers for TREX are entrirely different.
How do I know:
Change ID of CDHDR does not correspond to Change pointer in table COM_SE_CPOINTER. Now by activating the change documents I am getting entry in CDHDR and CDPOS but the mentioned change pointer table still does not get the entry.
I searched for BTEs and I got the below: -
Now to me the very obvious one was 4003, but it is not called while changing the classification data for materials. Ofcourse I activated the Product and the function module.
and now I am stuck!!
Any pointers for the Change pointers would be really appreciated??
Please share your knowledge even if you don't know the exact answer . I am new to TREX so possibly vague conversations could provide me a hint .
Thanks,
Best Regards,
Shreya

Hi Guys,
This issue was solved by implementing the BTE 4005 (OPEN_FI_PERFORM_00004005_E). This particular event is triggered in the update task for saving changes to business object. So In my function module (corresponding to BTE), I have explicitly called the method to write an entry in COM_SE_CPOINTER, because we just need the reference of business object for which classification data is changed.
Please refer the below code for more clarity.
BTE position: -
method called in FM to write change pointer.
Thanks anyways, for all the responses.
Cheers,
Shreya

Activate change pointers for Z-idocs

Hi friends,
I've created a Z-idoc for some standard SAP tables (like TCJ1T, TCJ05 etc). I've written a function module which fetches all the data from the above-mentioned tables and pass it on to the idoc. So far so good.
Now the requirement is like, I need to pass only the updated records (insert/update/delete) in these tables to the idoc. I found that there are concepts like change document and change pointers assosciated with it. Again, the fields that I need to transfer in the above tables have their change document flag set. I've also created a Z-Object through SCDO to capture the changes. (I initially tried adding the tables in the standard object PROJ regenerated the programs, but the approach didn't work). The function modules generated through SCDO, i guess, have to be called somewhere, may be in an exit (I got an info in a previous question that it is never called automatically, but has to be called explicitly). The entries for most of the tables I'm working with are created via SPRO (which links to the Table Maintainence Generator for the above tables). I found that there are no user-exits for the transactions SPRO and SM30, to call these function modules in the first place.
Change pointers refer to the tables CDHDR and CDPOS, the tables which the change document updates (as found in the function module CHANGE_POINTERS_CREATE). Now, how do I track the updates on these tables, since the change pointers itself is dependent on the change documents and I couldn't find a place to incorporate the function module call that would update the change document tables?
Any help is appreciated.
Thanks & Regards
Anil Madhavan

Hi Anil,
In SM30 you have programmable events:
Environment -> Modification -> Events
Here's the link to documentation teaching how to create change documents:
http://help.sap.com/saphelp_47x200/helpdata/en/2a/fa015b493111d182b70000e829fbfe/frameset.htm
I'm also trying to learn how to access the needed data in these SM30 events so that I can call the function to generate the change document with the right data in SM30
Let me know if this was useful.
Bye,
Nuno

Activate Change Pointers for Purchase Orders

I thought that change pointers would be active by default for purchase orders, but when I change a purchase order field that should be change pointer enabled, nothing is written in table BDCP.
Here's what I have done:
1) Used transaction SCDO to look at the change Documents.
2) Identified object EINKBELEG (Purchasing Document) as the likely object.
3) Verified that table EKKO is one of the tables in the object.
4) Verified that the data element of the field that I am changing in the PO - ZBD2T - is change pointer enabled (it is).
I cannot get any entry created in BDCP with these settings; change pointers are working for other documents.
I also put a breakpoint on the sebugger for the function module EINKBELEG_WRITE_DOCUMENT in the update task, and I cannot see it being triggered, so I am wondering if I am doing the correct thing here.
Can somebody please tell me what I am doing wrong?
BR,
Tony.

Hi Guys,
This issue was solved by implementing the BTE 4005 (OPEN_FI_PERFORM_00004005_E). This particular event is triggered in the update task for saving changes to business object. So In my function module (corresponding to BTE), I have explicitly called the method to write an entry in COM_SE_CPOINTER, because we just need the reference of business object for which classification data is changed.
Please refer the below code for more clarity.
BTE position: -
method called in FM to write change pointer.
Thanks anyways, for all the responses.
Cheers,
Shreya

Change Pointers for the fields PERNR, GBDAT and PERID

Hi,
     I want to know, how we can delete/de-activate and then add/activate Change Pointers for these fields. Is my Question a valid one? Please guide me if I'm wrong and help me in this issue.
Thanks in advance,
Exertive.
Message was edited by:
        Exertive

Hi Suresh,
               I didn't get your point exactly. With this report, we can only Log the Changes that has been performed on a Particular Pernr or an Infotype. Actually, if see go through my Previous Post, you will get Clear Idea. Actually, I'm looking for the Concept below:
Actually, I'm using the Standard ALE Process for Masking Master Data fields (PERID and GBDAT) with default values from one system to another using the Message Type, HRMD_A (which will be used as a Standard Message Type for HR Personnel Administration and Organizational Management). For this, I' have used two Conversion Rules in the above Message Type. To make this ALE trigger, I have to Run the Report, RBDMIDOC. But, before trigerring the ALE for all the Employees in the System, I want to test the ALE for few Employees, whether it is working properly or not. For this, I think, I need to delete the Change Pointers for all the Employees except for the few Employees whom I want to Test. But, I don't have any idea, how to delete those Change Pointers. Please guide me some solution or provide me some document where I can find exact procedure for doing this. Guide me, If I'm going in wrong procedure.
Thanks in advance,
Exertive.

Change pointers for QPMK and QSMT

QPMK Replication of QM master inspection characteristics (ALE)
QSMT Replication of QM inspection methods
I activate change pointers for QPMK and QSMT using BD50.
I want to enter change document items for QPMK and QSMT using BD52.
How do I find the document items for these message types to enter in BD52?
Can these message types use change pointers?

Please respond anyone

Change Pointers for Infotypes - HR Master Data distribution

Hi,
I want to distribute HR infotypes Master Data to other systems...
How do I activate Change pointers for HR infotypes?
Do I have to use idoc HRMD_A or HRMD_B?
Do I have to distribute thru PFAL transaction?
Can I do that a employee change the data of an infotype send the idoc authomaticly?
Thanks in advance.
Regards.
Urtzi.

Thanks Roman,
I've looking also for idoc HRMD_ABA. What is the diference between HRDM_ABA and HRMD_A?
When I press SAVE in PA20 doing changes in an employee system distributes authomatically HRMD_ABA but not HRMD_A. Is it correct?
So, if that is correct could I say the following:
- To distribute HRDM_A we can use report RBDMIDOC scheduleing periodic JOB.
- iDoc HRDM_ABA is distributed when saving data in standard transactions.
Is that correct?
Regards.
Urtzi.

This is regarding creation of change pointers for a particular table?

Hi to all,
Here is my requirement,
How to create change pointers for a given table.
i know that change pointers record changes of master data at field level......
here now i have to create change pointers for a given table..
how to do this,......\
regards,
swami

Configuration steps :
BD53 -> create reduced message type (use MATMAS as your reference for material master records). Select tables
BD52 -> specify fields to track (use fieldname KEY for new entries)
BD50 -> activate change pointers for new reduced message type
BD61 -> activate change ponter generally (only if not already done) Make sure if this is not already active that you deselect the default enteries in BD50 for the message types you don't care about
The view BDCPV will now contain change pointer entries for the master data that has change or been created
Use function modules
CHANGE_POINTERS_READ - read new unprocessed change pointers
CHANGE_POINTERS_STATUS_WRITE - mark change pointers as processed
Hope it helps.
Chang

How to get change log for z-fields in VBAk(Sales order)

Hi All,
Please help me in this.
My requirement is get the change log for z-fields in sales order.
In the sales order header level we have one tab Additioanl data.
In this we have z-fields, if we change any of the field value, it is accepting the same and updating in data base as well.
But it is not appearing in change log<. I.e. Environment->changes.
How to get the change log for the z-fields.
In data element level enable the check box of change document.
Please help me in this.
Thanks in advance
Jaya,G

Hi Jaya,
For this you need to do some coding. Here is a link which tells you, step by step procedure how to activate Change log for the Z tables.
THe Object that you need to use for Sales Document is VERKBELEG
[https://wiki.sdn.sap.com/wiki/display/ABAP/Maintaining%20Change%20Log%20for%20Database%20Tables]
Hope this helps..
This is Primarily a Technical Consultant Job. Take his help before you make any changes.
Thnks
Srini

Change Pointers for Vendor Master

Hi All,
I have to activate change pointers for Vendor Master data. I have some doubts regarding the same.
1. An Idoc will be generated for newly created vendor, right?
2. If I extend the vendor master IDOC, where should I write code to extract the values of newly added fields?
3. If I create a custom IDOC for vendor master, what is the procedure to configure this in the change pointers for Vendor Master?
Thanks & Best Regards,
Kumar.

>
Sivapuram Phani Kumar wrote:
> Hi All,
>
> I have to activate change pointers for Vendor Master data. I have some doubts regarding the same.
>
> 1. An Idoc will be generated for newly created vendor, right?
> 2. If I extend the vendor master IDOC, where should I write code to extract the values of newly added fields?
> 3. If I create a custom IDOC for vendor master, what is the procedure to configure this in the change pointers for Vendor Master?
>
> Thanks & Best Regards,
> Kumar.
Hi,
1. Afer doing all the settings required to create change pointers (BD61, BD50, BD52), the idocs will be created when u run the report RBDMIDOC or execute transaction BD21.if any changes happen in master data
like new vendor is created or vendor data is changed, then only change pointers will be created and on executing the aforesaid report, idocs will be generated.
Also idocs can be generated by replicating vendor data through transaction BD14 or any other custom transaction.
2. When you add custom segments to basic type, you have to write code in suitable user exits.
Identify suitable user exit to populate data in custom segments and write the code in oubound side.
Identify suitable user exit to populate the values in custom segments to database table, this code is to be written in inbound side.
Regards
Vinod

How to activate change pointers for HRMD_A message

Similar Messages

Maybe you are looking for