How to activate control center and notification center in ios 8.1.3

I have iPhone 5s whit iOS 8.1.3, sometimes I can't access control center and notification center by sliding up or down on screen till I turn my device off and then turn it on. What is the problem?
Is it a bug in this version of iOS??? :-O

Go to Settings > General > Restrictions, make sure "Deleting Apps" did not get turned off.
If it is not a restrictions problem...
Try resetting:
Hold both the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.

Similar Messages

  • My control center and notification center are not showing when I swipe in there respective locations. Does anybody know why?

    My control center and notification center are not showing when I swipe in there respective locations. Does anybody know why?

    Thank you for the sugestion, but it was working fine both on the lock screen and on my home screen. I check all my settings and it is how it was from Friday, when I got the iPhone 5s. It just stop working.  The only way I can fix it is by shutting down the phone. It will work for a while, then it won't. 

  • I HAVE IPHONE 4 i am facing 2 problems on the IOS 7 GM 1-  I CAN'T SLIDE THE CONTROL CENTER AND NOTIFICATIONS CENTER UNTIL I MAKE RESTART 2- ONCE I RECEIVING CALL  IF I PRESS TO REMIND ME LATER THE I PHONE MAKE RESTART SOMETIME

    DEAR ALL,
    I HAVE IPHONE 4 i am facing 2 problems on the IOS 7 GM 1-  SOMETIME I CAN'T SLIDE THE CONTROL CENTER AND NOTIFICATIONS CENTER UNTIL I MAKE RESTART 2- ONCE I RECEIVING CALL  IF I PRESS TO REMIND ME LATER THE I PHONE MAKE RESTART SOMETIME.
    <Email Edited by Host>

    Restore as a new device, then sync your apps and contacts.
    Do not restore from backup.
    If that does not resolve it, then the next step would be to visit the Genius bar at an Apple store.

  • IOS 8 Control Center and Notification Center not transparent?

    I updated my iPhone 4S to IOS 8 and I have noticed that my friends Control Center, Notification Center and toolbar at the bottom are partially transparent but mine Control Center and toolbar are grey and Notification Center is black. I have tried many times turn on and off "reduce transparency". Is there another way to fix this?

    If you go to Settings>General>Accessibility>Increase Contrast>Off it should change it. I had the same problem.

  • How to change the main work center and  work center of each operation when generating work order by maintenance plan

    Dear experts,
    I face a problem that system get main work center from equipment master data as a default main work center in maintenance plan when creating maintenance plan. however, if main work center in equipment is changed later, the change will not synchronize to related maintenance plan. if work order is generated from maintenance plan, main work order in order is defaulted from maintenance plan instead of updated work center in equipment.
    another problem is that, for those orders generated by maintenance plan, the work centers in  operations is defaulted from task list in maintenance plan. in most case, work center in task list is dummy. Actually the work is done by work center in equipment master data.
    My expectation is how to auto replace the main work center and work center of operations in work order with the one in equipment master data if order is generated by maintenance plan? is there any standard configuration or enhancement/BADi that can help with this requirement?
    thanks！
    Wesley

    Wesley,
    Sorry - development is the only way.
    Another option is to create a batch program that runs before your IP30 run(s) and updates any maintenance items and task lists with the correct work centres.
    PeteA

  • Cost Center, Work Center and Profit Center

    Hi ALL,
    Can any one please explain me the concept of Cost Center, Work Center and Profit Center.
    And where and when do I assign the cost center???
    Amit

    Hi Check the following "
    Cost centers represent areas of responsibility where costs are incurred or where responsibility for costs may be assigned.  They represent the smallest unit of responsibility within the organizational structure of an enterprise.
    A cost center can be pictured as a ‘cost bucket’ such as a department, product line, production stage or geographical area. 
    An unlimited number of cost centers may be created.
    All cost centers within on controlling area have to be assigned to a cost center hierarchy (standard hierarchy).
    Costs originally posted to one cost center may be distributed and assessed to one or more other cost centers using allocations.
    How are costs assigned/posted to a cost center?
    External financial accounting documents created in FI, AM or MM that post to a G/L expense account can be configured to require a cost center assignment be entered at the time of transaction entry.  The system automatically creates a parallel CO document that posts to the indicated cost center.
    Cost elements master records can be configured to be posted to a certain cost center (automatic account assignment).
    In addition, other non-financial activity (i.e., direct labor hours) may be posted directly to cost centers from within CO or via other modules such as PP  or HR
    chandra

  • Cost center and cost center group

    hi,
    how can i create cost center and cost center group?

    hi,
    after u enter in to sap easy access
    goto Extras menu-settings->select display technical names
    you can see the T.codes for each transaction
    for example:create cost center
    accounting>controling->cost center>master data>cost center>individual processing-->KS01-create

  • The control centre and notification centre on my iPad 3 running iOS 7 is not translucent, The control centre and notification centre on my iPad 3 running iOS 7 is not translucent

    Apple told us that in the new iOS 7, menus such as the control centre and notification will be translucent, and allows users to see to some extent content concealed behind the menus.
    I've update my iPad 3 to iOS 7.0.3. The menus (Notification centre, Control centre etc...) are not translucent, at all.
    Control centre is completely greyed out, and I can't see anything behind the menu when called up.
    Notification centre is similarly completely blacked out, though to a small extent I can see some content behind notification centre.
    I've seen in video reviews of iOS 7 that notification centre and control centre are both close to being clear, and take up the colour of content behind them.
    My iPad 3 does not display such aesthetics.
    I know that some of you will say that I should turn off 'increase contrast', but that's not the case, since I've already turned it off.
    The issue was already present when I update from iOS 6 to iOS 7.0.2, and the problem was carried over to iOS 7.0.3, in which I thought the issue would be rectified.
    Is anyone else finding this issue present on their devices?
    Has anyone found a fix yet?
    Thanks!

    Sadly, the iPad 3rd Generation does not recieve the blur/translucency effects which you are mentioning in iOS 7. (The reasoning for this situation is most likely listed below.)
    1.) The difference in processing power between the iPad 3rd generation & iPad 4th generation, (The 4th Generation recieves these visual capabillities while the iPad 3rd Generation isn't capable of producing the effects).
    2.) Marketing issues in which Apple prefers consumers to purchase a newer model instead of something older.
    Turning on the 'Increase Contrast' option is Settings will on make the Notification Center & Control Center completely opaque. This setting is used to make text legibillity higher.
    I hope that this answers your question, if you have anymore questions, just ask. Enjoy your iPad (:

  • Profit center and profit center group wise profit and loss account

    Hi
    My name is swetha i have one doubt in ecc 6 version.   i need profit & loss account profit center and profit center group wise is it available in sap ecc 6 . Could u please details such kind of informatiion how we will get the p&l report  in sap profit center group and profit center with transaction code.
    Regards
    Swetha

    Hi
    Please use report
    S_ALR_87009712 - Profit Center List: Plan/Actual
    Here you can enter the Profit Center Group for which you need the P&L .
    Also create a account group which should include all your PL accounts and use the same in the selection of the report.
    There are other reports you can try on the same concept.
    S_ALR_87009712 - Profit Center List: Plan/Actual
    S_ALR_87009726 - Profit Center Group: Plan/Actual/Variance by Origin
    S_ALR_87009734 - Profit Center Group: Plan/Plan/Variance
    S_ALR_87009717 - Profit Center Group: Quarterly Comparison of Actual Data
    Thanks

  • Bring profit center and cost center  hierarchy from R3 to BW in BI 7.0

    Hello,
    I need to get the hierarchy from R/3 to BW. Can someone send me a link or mention steps i need to do to bring profit center and cost center hiearchy from R3 to BW.
    Thanks
    Laura.

    As you would for any other infoobject
    Activate the business content hierarchy datasources on R3 for cost centre and profit centre
    Go into BW - replicate the metadata
    Then just connect via transformations or transfer rules the datasources to yoru infosources or master data objects
    Create an infopackage per hierarchy!!!!! - press the button available hirachies from OLTP - click the one you want on the left - fire it off
    Then repeat new infopackages for all hierachies

  • Functionality of Profit Center and Cost Center

    Hi,
    I am unable to understand the functionality of Profit center and cost center, I know that cost center represents area within an organization for which you will like to see the expenses for a particular time period. for example in an organisation we have three cos centers Accounts, HR and Admin. whenever you post an accounting document in FI you will specify the cost center to which the expense relates. but in some cases when you post an expense and give the relative cost center the profit center is also driven by the system. why is this behavior? i mean i have posted an expense not an income then why is system driving the profit center as well?
    Profit centers are used if you want to see the profit of different area of your organisation. in what kind of postings we use profit center? and if we could use profit center to draw income and loss for a specific area why do we need segment reporting? and what is the difference between Segment and Business area. what i understood from their definition is that they are both same and use for same purpose.
    I am totally lost in these concepts. please some one help me out with an example. i am stuck at this point. some one please clarify my concept of Profit Center, Cost Center, Segments and business area please.

    Hi,
    Cost center & Profit Center are organizational units   within the enterprise structure , created for better internal control.
    As the name suggests Cost Center  is  the lowest level  of the organizational unit representing a defined location of cost incurrence or otherwise to which you can meaningfully assign the cost(both direct & Indirect).
    Profit Center is an organizational unit  in accounting  ,where management would require to see the profitability & fix the responsibility. It may be each plant/division of the company .
    If you consider the Plant is the Profit center, you can take the various deptts in the Plant as cost centers. you can draw a balance sheet & profit & loss account statement at profit center level but this will be for your internal use.From this you can know the ROI on particular area. Profit centers are assigned inside the cost center so when you update cost center, profit centers are updated automatically.
    Where as Segments are used for legal reporting of your accounting standard as per IFRS. Both Business Area & Segments are more or less same with some technical difference.
    Business area  is a free organizational unit. It can be derived through cost center or can be entered manually.
    But segment is a dependent organizational unit. It is defined & attached inside the  profit center master data. It can’t be entered manually.
    SAP suggest to use the Segment concept.
    Thanks & regards
    Deepak

  • Transporting Master data - New GLs,Cost Center and profit Center.

    Dear Friends,
    1. I have to create new GLs in Dev, Now i have to transport the new GL to Quality and Production. As per my knowledge, Master data has to created in DEV,Quality and Production.
    please suggest, is there any t.code where i can transport GL from Dev to quality and production.
    2. when Creation of the site, New Cost center,Profit center, Changes to standard hierarchy both in cost center and profit center hierarchy has to done in dev,quality and production manually.
    Any suggestions where i can do only in dev and transport to quality and production.
    3. After creating new cost center and profit center, i have to go to okb9, select the co.code,cost element and insert the new cost center and profit center in every cost element. This takes almost one hour.
    Please suggest how to reduce this manually process.
    All the help will be greatly appreciated.
    Regards
    Sridhar Reddy

    Hi ,
    Master data is to be created in diffrent clients as it is a non transportable object .
    So in case of GL , cost centers you will have to again re run the LSMW which you had created for DEV .
    Secondly OKB9 is a transportable object , so i dont feel there should be an issue in adding it to a transportable object .
    In case of adding the values of tables in a request what you can do is create  a request , go to SE01 open the request in change mode in the objects enter TABU and enter on the relevant entries that you want to transport .
    But again one has to be very clear on what all table entries are to be transported , like SKA1 , SKB1 , SKAT etc. looking at the complexities and moving ahead with the standard way it is advisable to re run the LSMW in QUA and PRD .
    Hope this helps .
    Regards ,
    Dewang T.

  • CO, which table decribes "cost center" and "cost center group"?

    Hello experts,
    now I have the transaction KP06. Maybe through customizing the user has built a "cost center group" for some "cost center".
    In which table can I find out the relationship between the "cost center" and "cost center group" ?
    Thanks.
    RD
    Edited by: Marching Dai on Jun 16, 2008 2:05 PM

    Hi Arun,
    Please check this link
    http://www.erpgenie.com/abap/tables_fi.htm
    Please check CKPE --->CO-PC Cost Object Hierarchy: Individual Objects
    CSKA Cost Elements (Data Dependent on Chart of Accounts)
    CSKB Cost Elements (Data Dependent on Controlling Area)
    CSKR Resource master record
    CSKS Cost Center Master Data
    Best regards,

  • Cost center and profit center details

    Hi All
    Is there any function module or BAPI to obtain cost center and profit center details
    for a GL account. Actually I am obtaining the carry forward balance for a
    fiscal year from the table GLT0 but I am not getting the corresponding profit center
    and cost center details.
    Please suggest a way forward!
    Regards
    Ankit

    Hi,
    If you are getting data from GLT0 table, using the Account number go to SKA1/SKB1 tables and get the CostCenter(KOSTL) and Profit Center(PRCTR). If you want to get details about CostCenter, its master table is CSKS and master table for Profit Center is CEPC. you can get required info from these tables.
    thanks,
    sksingh

  • Cost center and profit center linked to GL account

    Hi All
    I am obtaining the carry forward balance for the fiscal year from the table
    GLT0 but I also need the cost center and profit center details for the GL account,
    which I am unable to get from either GLT0 or GLTPC or GLT1 tables.
    Is there any other way out. Please suggest!
    Regards
    Ankit

    Hi,
    Hope OKB9-Account Assignment will resolve this issue.
    There you have the assignments.
    Regards
    A
    Assign points if useful

Maybe you are looking for