How to activate cube in background
Dear Friends,
How ro activate cube in background?
Because when iam activating in foreground it is saying maximum idle time exceded.
Regards
Ramu
hi,
hv a look at ths:
Re: Activate info cube in background
hope this helps
Regards,
Archana
Similar Messages
-
Activate info cube in background
How to activate infocube in the background? There is a program to do, and what if it takes long time.
Regards
KunalWe have a programme which is used to programmatically add / remove attributes to a bunch of cubes in a cube group.
Part of the code uses this function module (RSDG_CUBE_ACTIVATE).
The problem that I have been asked to address, is getting rid of the popup messages that appear when this function is called.
It's really nice having a programme that can run through all our cubes and change attributes (30+ cubes), but really really irritating having to sit there and press ENTER each time a popup appears.
Cheers,
Andrew -
How to activate master data in background ?
Hi All,
I would like to know How to activate master data in background ?
When I try with right clic on infoobject and choose activate I have a time out
Thanks for your help
SebastienNikhil
This method is to activate the structure in development server
I want to activate the master data after an upload with a DTP in production -
How to activate a cube in business content of bi ?
how to activate a cube in business content of bi ?
Please search the forum before posting a thread
Edited by: Pravender on Apr 11, 2011 4:28 PMhi ra
good question dear
if you want to activate cube in business content do this steps.
1).select your data source and maintain all the things in r/3 side.
2).then come to bi side .
3).t-code rsorbct.
4).you must have an idea about your app component .i..e that app belongs to sd or mm or hr or finance .
5).if it belongs to purchasing select infoobj and select supply chain management ,select purchasing.
6).select char and key fig,drag and drop it into right side component .
7).select info provider select supply chain management and select your cube .
8).how to find cube .that is cube like 0pur_c01,c02,c03,c04 like that select any of the cube and drop in to right side component .
9).now installation part.
10).select source system top side and select your source ecc 6.0, select component and select install/activate.
11).now your cube is ready to use .create package for full,initialize ,delta.ok
bye ....................samar reddy... -
How to activate background option in transaction code S_ALR_87013558
Dear All
Kindly guide me. How to activate background option in transaction code S_ALR_87013558
Regards
Sanjeet KumarHi Sanjeet,
I think the thread that you have read have different program number.
Please follow the below mentioned steps:
1. First execute report S_ALR_87013558. Then go to System->Status and copy the program number from there.
2. Go to se38 and put the program number and execute.
3. Go to Program at the top menu and now there you can see the option Execute in Background available there.
4. Execute and save it as variant.
5. Go to SM36, mention the job name and enter. Put the variant and save.
6. Go back, and go to start condition and start immediate or as per date/time desired.
Try this, if it works.
Regards,
Amit Rajoria -
How do i change the background to gray behind my image
how do i change the background to gray behind my image
If your image and background are on separate layers, activate the background layer and go to Edit > Fill, select the desired gray and click OK.
-
How to activate InfoCube 0SD_C03
Hi all,
I'm new to BW.
I don't know how to activate my info cube 0SD_C03.
I can't because the activation menu is grayed.
If someone has an idea, please ?
Best Regards,
Erwan.Hi Erwan,
please check the job log in sm37, the syslog with sm21 and the dump overview with st22 and see if there are any to this activation related entries and let us know the result.
Additionally you can try to activate it in foreground and you will see some messages.
Siggi
Message was edited by: Siegfried Szameitat -
How to activate a link in JOptionPane.showMessageDialog()
i have the following code (the color of "Email Me" is blue)
JOptionPane.showMessageDialog
parent,
"<html><a href=\"mailto:[email protected]\">Email Me </a></html>"
"dialog title",
JOptionPane.PLAIN_MESSAGE
);"Email Me" is blue and underlined but nothing happened when clicked on.
please help. thanks.hi ra
good question dear
if you want to activate cube in business content do this steps.
1).select your data source and maintain all the things in r/3 side.
2).then come to bi side .
3).t-code rsorbct.
4).you must have an idea about your app component .i..e that app belongs to sd or mm or hr or finance .
5).if it belongs to purchasing select infoobj and select supply chain management ,select purchasing.
6).select char and key fig,drag and drop it into right side component .
7).select info provider select supply chain management and select your cube .
8).how to find cube .that is cube like 0pur_c01,c02,c03,c04 like that select any of the cube and drop in to right side component .
9).now installation part.
10).select source system top side and select your source ecc 6.0, select component and select install/activate.
11).now your cube is ready to use .create package for full,initialize ,delta.ok
bye ....................samar reddy... -
How to activate distributed rendering?
Hi,
as importing many/bigger clips and rendering them in Final Cut Pro X takes some time i wanted to use the distributed rendering for that to use all the macs in the network. Starting Final Cut Pro X on all these machines did not seem to have any effect out of the box, and Final Cut does not contain no obvious settings to enable distributed rendering in the preferences. But some day i noticed the litte arrow at the background actions window at the last line "sharing". I clicked on it and share monitor opened up, but it just showed the local machine. As there was still nothing to configure here i became curious and searched a little and found out, that i would need something called "QMaster". As there was no obvious way to get this i purchased compressor, which seems to contain this. After installing qmaster i was able to setup each mach so that they are listed in the share monitor and are visible from each other. But: There is still no distributed rendering happing, and i am getting out of clues now on how to activate this feature for importing and rendering clips. Can anyone help me on getting the distributed rendering to work?
When creating a film i now have the option to send it to compressor. When i do so it opens compressor (btw. this program has a terrible user interface) and when i click on "send" it opens a selection, where i can select a cluster and it only presents one entry to select, my computer. So how has this to be set up to wark flawlessly? Or is this feature not working yet?
Thanks for your help in advance...I know, late response, but since this comes up on search I thought I'd post a hard-won answer.
The way to work with clusters today is via Compressor only. And Compressor can't work on a grid with something that's not entirely inside a QuickTime container. That's what it uses to slice and distribute the processing.
So the first thing you must do is Share the default Master File for your FCPX project. Set it to open in Compressor to save you a step. That will render the project into a ProRes file on the computer you share it from (so pick a fast one), which you may then transcode into any of your preferred delivery formats in Compressor across your cluster. Just drag up the preferred formats, click submit, and then pick your cluster to do the transcoding on.
This works out OK in practice; it's a lot easier for Apple to handle on their end because they just have to slice up a ProRes file for the different CPU's and then stitch it back together for delivery. They gave up on Compressor or Qmaster working directly with an unrendered FCPX project; I imagine there were too many bugs with various plugins and contingencies etc.
Pity they don't explain this more clearly though right in the program. They could have "Transcode on Cluster..." as a default Share destination, which would then tell you what you need to do, even though it would be exactly what I just described. But I guess that would violate Apple Minimalism. -
Hi,
I have installed ISU in my system but it is not activated.Can anybody let me know how to activate ISU after installation.
Regards,
Bankim.Goto T-code : SFW5 and select "Utilities" then activate the same it will run some background job and will take around 2-3hrs once ISU activated cannot be reverted back
Please reward points if it helps
Regards,
Shiva Kumar -
How to Activate the Table which Doesn't Exist - Can I create Table in SE11
Hi Gurus,
I am a BASIS Person ..so, I don't have much idea about ABAP Developement side . But, while applying patches to one of the SAP Component, I get the following error message ( usr\sap\trans\log ) :
Phase Import_Proper
>>>
SAPAIBIIP7.BID
1 ED0301 *************************************************************************
1 EDO578XFollowing objects not activated/deleted or activated/deleted w. warning:
1EEDO519X"Table" "WRMA_S_RESULT_DATA" could not be activated
1EEDO519 "Table Type" "WRMA_TT_UPDTAB_DSO" could not be activated
1 ED0313 (E- Row type WRMA_S_RESULT_DATA is not active or does not exist )
2WEDO517 "Domain" "WRMA_KAPPL" was activated (error in the dependencies)
2WEDO517 "Data Element" "/RTF/DE_FISCPER" was activated (error in the dependencies)
2WEDO517 "Data Element" "/RTF/DE_FISCVARNT" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RCLASV" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_AMNT" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_INV" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_OBJ" was activated (error in the dependencies)
2WEDO549 "Table" "V_WRMA_TRCLASVER" was activated (warning for the dependent tables)
2WEDO549 "Table" "V_WRMA_TRCLASVPE" was activated (warning for the dependent tables)
2WEDO549 "Table" "V_WRMA_TRCLPERCL" was activated (warning for the dependent tables)
2WEDO549 "Table" "WRMA_S_STOCK_SELECTION_DATE" was activated (warning for the dependent tables)
<<<
Now, I checked Domain WRMA_KAPPL in SE11 and it diplays that it is partially active :
" The obeject is marked partially active for the following reasons :
Errors occured when adjusting dependent Objects to a change. Some of the dependent objects could not
be adjusted to this change. To adjust the dependent objects, you must perform the following actions
the next time you activate this object.
- SET THE SYNP TIME STAMP IN THE RUNTIME OBJECT OFALL DEPENDENT OBJECTS
My question is - how to activate this SYNP Time Stamp.. ?
- Once I activate this SYNP Time Stamp.. How do I activate this ..in SE11 or some other
TCode..
Any / ALL Help is highy appreciated and would be rewarded with appropriate Reward Points.
Thanks,
Regards,
- Ishan
>> Ok, Now I forcefully activated the Domain and then all the 5 Data Elements in SE11 ...now I have error
that table WRMA_S_RESULT_DATA and WRMA_TT_UPDTAB_DSO Could not be activated...
..And in SE11 > Input the first / Second Table > Excute > Output : Table Does not Exist !!!
- Now, How do I activate something which does not exist in the first place ?
Any Input about this ?
Thanks,
Regards,
- Ishan
Edited by: ISHAN P on Jun 19, 2008 3:44 PMRead note 1152612 - Incorrect component type in structure WRMA_S_RESULT_DATA.
The error occurs in Release BI_CONT 703 Support Package 9.
If you require an advance correction for Support Package 9, make the following manual changes if the InfoObject 0TCTLSTCHG is inactive in your system.
1. Use transaction RSA1 to call the Data Warehousing Workbench.
2. Check whether the InfoObject 0TCTLSTCHG was already activated by the compilation process the first time you called transaction RSA1. You can use transaction RSD1 to check this by entering 0TCTLSTCHG in the "InfoObject" field and choosing "Display". Proceed as follows if the InfoObject is still not active:
3. Go to BI Content activation.
4. Select "Object Types".
5. Open the "InfoObjects" tree and select "Objects".
6. Search for the InfoObject 0TCTLSTCHG and select it.
7. Transfer the object and activate it.
These steps activate the required component type /BI0/OITCTLSTCHG. You can check again in transaction RSD1 to ensure that the InfoObject 0TCTLSTCHG is available as active.
Jacek Fornalczyk -
How can I change the background of a running webpage on my own. Example Facebook I want to change its background color from white to black just in my view, not for all. Cause I really hate some site with white background because as I read for an hour it aches my eyes but not on those with darker background color.
You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/ -
How to activate the ATP buckets in APO?
Hi,
We are in the process of changing the ATP buckets in our APO system.
I know the Path in the configuration:
Advanced Planning and Optimization -> Global Available-to-Promise (Global ATP) -> General Settings -> Maintain Global Settings for Availability Check
On the left side you will get three sections:
Global Settings
ATP Buckets (Active)
ATP Buckets (Planned)
I can change the values in (example field Shift Receipt Bucket) the ATP Buckets (Planned) section and save it with a transport. Now the question is how to activate the buckets. Is there another transaction for this? SAP Help doesn't specify how to activate.
Any ideas are highly appreciated.
Thanks,
MaheshHi,
To activate the buckets one need to check the box 'Current' in the options under ATP Buckets (Active). Also, as referred earlier by Dipthi do look up the documentation under:
SAP Advanced Planning and Optimization (SAP APO) -> Global Available-to-Promise (Global ATP) -> Settings for Global ATP -> General Settings for Global ATP ->Definition of Buckets for ATP Time Series ->Activation of Bucket Parameters for ATP Time Series.
The details are as beneath:
Use
If you change bucket parameters (see Definition of Buckets for ATP Time Series), these must be activated subsequently for the ATP time series.
Features
The system activates the bucket parameters in the following situations:
Since activation in each of the situations described below leads to downtime, you should change bucket parameters less frequently than other Customizing settings.
· Creating the active planning version for a client using transaction /SAPAPO/MVM
If you set up a system again, you should process the bucket parameters before you create the active planning version. The bucket parameters are thus activated automatically.
· Initializing SAP liveCache for all clients using transaction LC10
In the case of an upgrade, you should process the bucket parameters before activating SAP liveCache. The bucket parameters are then activated automatically.
· Executing the report /SAPAPO/OM_ATP_REBUILD_TS
The system only rebuilds the ATP time series here.
In this case, the SAP liveCache administrator must execute the following steps:
a. Shut down SAP liveCache.
b. Replace the com-file registration:
i. At command line level, go to the SAP subdirectory of the SAP liveCache installation.
ii. Under Microsoft Windows, save the original registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst), for example, by renaming or copying to another directory.
iii. Under Microsoft Windows, rename the registration file SAPAPO_REBUILD.lst as SAPAPO.lst (UNIX: libSAPAPO_REBUILD.lstas libSAPAPO.lst) or copy it to another directory.
iv. Under Microsoft Windows, rename the registration file SAPATP_REBUILD.lst as SAPATP.lst (UNIX: libSAPATP_REBUILD.lstas libSAPATP.lst) or copy it to another directory.
c. Launch SAP liveCache.
d. Execute the report /SAPAPO/OM_ATP_REBUILD_TS.
e. Shut down SAP liveCache.
f. Replace the com-file registration by replacing the registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst) with the original versions under Microsoft Windows.
g. Launch SAP liveCache.
Regards
Vinod -
How to change JTree nodes background?
hello there
i have a jtree which i set its background to red
but the nodes background is still white
why?and how to set the nodes background to red too?
and how to remove the tree border
because i tried setting it to null and it doesn't work?
here is my code:
package view;
import java.awt.Color;
import javax.swing.*;
import javax.swing.tree.*;
class TreeComponent{
public static void main(String[] args) {
JFrame frame = new JFrame("Creating a JTree Component!");
DefaultMutableTreeNode parent = new DefaultMutableTreeNode("Color", true);
DefaultMutableTreeNode black = new DefaultMutableTreeNode("Black");
DefaultMutableTreeNode blue = new DefaultMutableTreeNode("Blue");
DefaultMutableTreeNode nBlue = new DefaultMutableTreeNode("Navy Blue");
DefaultMutableTreeNode dBlue = new DefaultMutableTreeNode("Dark Blue");
DefaultMutableTreeNode green = new DefaultMutableTreeNode("Green");
DefaultMutableTreeNode white = new DefaultMutableTreeNode("White");
parent.add(black);
parent.add(blue);
blue.add(nBlue);
blue.add(dBlue);
parent.add(green );
parent.add(white);
JTree tree = new JTree(parent);
tree.setBackground(Color.red);
tree.setBorder(null);
frame.add(tree);
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setUndecorated(true);
frame.getRootPane().setWindowDecorationStyle(JRootPane.PLAIN_DIALOG);
frame.setSize(200,200);
frame.setVisible(true);
}how to set the nodes background to red too?
((JComponent) tree.getCellRenderer()).setOpaque(true);[/code\
how to remove the tree borderWhat border?
db -
How to Virtual cube with services works
Hi,
How to Virtual cube with services works.
can anyone provide me a realtime scenerio.
if possible provide some code.
Thanks,
cheta.For which functinality you are trying to create VC with services.
This is mostly used in SEM BCS.
You have to create cube similar path like normal cube, but select in the properties virtual cube, services.
There is a standard FM which connects the Virtual cube to the required cube in BCS. ( this is done by BCS data basis generation function) and we have to do nothing for FM.
In BCS we use virtual cube only for reporting purpose, since standard BCS cube cannot be used for reporting. hence what we do is create another virtucal cube very smiliar to BCS cube.
Then both the Virtual cube and BCS cube are connected by standard FM.
Maybe you are looking for
-
10.4.9 ::: Renaming files / folders does not work the GUI way
Hi, just realized a strange problem on an Mac Mini (10.4.9) here. The installation contains 3 user-accounts Problem only occurs for one of those three accounts Description: - If the user tries to rename a file via a) mouse click on the name or b) get
-
My ipod not recognisable by itunes i have tried everything suggested by app
ok, here is how it started. i wanted album art in my ipod, so i searched the web got all the album art i could and put in each album stored in my itunes. everything was going smoothly when it came to one particular album and from tat time i m having
-
Anyone have advice on how to install the recent Itunes update on a 64 bit Windows 7 PC? I've downloaded the update, uninstalled the prior version, but no luck. Thanks.
-
Hi, In the hopes of enforcing a precision of 1.0e-16 for all the doubles in my Java application, I am trying to apply a DecimalFormat pattern so that my doubles can be printed in scientific notation if necessary. I am doing: DecimalFormat decf = (Dec
-
Hi Group, I'm just wondering if the Application Background Color can be changed in CS4 applications? It used to be you could set it in windows display properties. I don't mean the document background. Thanks, Bob