How to activate IM and WM managed storage location

Hello MM Sapperu2019s,
Please let me know if a storage location is related to IM or WM how / which t code  I can  activate the both.
Cheers,
Kumar.s

Hi,
Go to LI20 - clear differences WM ,LI21 - clear differences IM
Please go to bellow link
http://www.sap-img.com/warehouse/physical-inventory-in-sap-wm-and-im.htm
http://www.sap-img.com/warehouse/important-t-codes-in-sap-warehouse-management.htm
Thanks,
Raviteja

Similar Messages

  • How to Block postings for WM managed storage location

    Hi Experts,
    The scenario is we want to block posting for all materials for a WM managed sloc. We cannot use Authorisation management due to some limitations. Please suggest any other way to do this.
    Thanks

    Thanks for your responses.
    We are looking for an option where we do not have to do any configuration changes and flag for deletion or archive is not an option for us because it is just a temporary requirement. Moreover there are some technical limitations due to complexities in ALE so we cannot use MM06. Any other ways that anybody can think of?
    Thanks

  • HT4847 In preparing for iCloud storage to be reduced to 5GB, I have deleted all my emails (via internet to iCloud) including all inboxes, sent mail, archived etc. HOWEVER my iPhone (under Settings iCloud Storage and Backup Manage Storage says I have 8.5 G

    In preparing for iCloud storage to be reduced to 5GB, I have deleted all my emails (via internet to iCloud) including all inboxes, sent mail, archived etc. HOWEVER my iPhone (under Settings>iCloud>Storage and Backup>Manage Storage says I have 8.5 GB. Please help!

    The only thing I can think of that may cause this would be storage buffering.  See http://support.apple.com/kb/HT4873.

  • Serial Numbers in Inventory Management – Warehouse Managed storage location

    Serial Numbers in Inventory Management u2013 Warehouse managed storage locations
    We want to run inventory cycle at the warehouse for materials. These materials are u2018serial numberedu2019 in the material master. During the initial entry (say GR) of the materials, systems prompt for the serial numbers. At this point, system offers option of assignments of serial numbers automatically.
    While running an inventory cycle for warehouse u2013 and posting difference at WM level (LI01), system is throwing error as u201Cmaintain serial number for totol quantityu201D. System does not promt me to enter the serial number for the materials (count) which are found excess/shortage duing the inventory cycle.
    Is there any configuration where this scenario can be managed; system should prompt us to enter serial number while posting differenes at WM level (LI20).
    The inventory cycle is -
    1.     Create Physical Inventory Documents - LI01N
    2.     Activate Physical Inventory Document -      LI02N
    3.     Enter Count -     LI11N
    4.     Post Differences at WM level -     LI20
    5.     Post Differences at IM level(If Differences are posted at WM ) -     LI21

    Curious to know: The WM Inventory transaction - LI11N - (where we enter physical count. )
    1. Compared to MI04 - IM Inventory Transaction: where a pop-up window asks for serial number of the material.
    2. We expect a similar pop-up at LI11N transaction- where the system should ask serial numbers.
    Q.1 How can we achieve this?
    Q.2 Will this be a standard SAP practice?  (if we do customizing to get serial nos. pop-up window at LI11N)
    thanks,

  • Cycle count error "HU 100201 not in an HU-managed storage location" in LX26

    Hi,
    I get the following error message "Handling unit 1000020118 is not in an HU-managed storage location" When i try to initiate a cycle count for a bin through LX26 Tcode. Kindly advice about the cause of the problem and how I can fix it.
    Thank you for reading

    I am not sure but it probably is not, sorry looks like i posted this on the wrong forum

  • Creation of new handling unit management storage location

    Hello
    I am using transaction HU02 and create a handling unit from existing material. But i don't have any HU management storage locations in the system.
    Could you please explain me how to create a HUM storage location?
    Thanks,
    Ilya

    Hello,
    I am trying to create new Handling unit, with HU02 t-code, and i am getting the following errror:
    The number range object 1 does not exist
    Message no. NR002
    Diagnosis
    The number range object was not defined.
    Procedure
    Maintain the specified number range object using Transaction SNRO.
    I've customized number range for object LE_SSCC in SNRO.
    Сould you please advise, what is my mistake?
    Thx in advance

  • Storage location and post.chge storage location not in the same warehouse

    Hi All,
    We have HU managed Storage Location, and in this Storage Location we have SUT managed Warehouse, Now while Goods Receipt we have to create inbound delivery, which is working fine and i can see my stock in Goods receipt area,, later on whicle creating Transfer Order to putaway in a bin i have a error message "Storage location and post.chge storage location not in the same warehouse" please help me with this error message. Thank you for all your inputs.
    Regards
    Samuel

    Hi Nagesh,
    Thank you for the input. I am receiving Stock from vendor and while creating Inbound delivery i created the Handling Unit and also packed it and i could also post it (PG Receipt). Now when i am creating TO i have that error message. The Storage Location where i am receiving is 9001and i have also maintained the partner Storage location,,, its like this Plant(1000)-SLoc(9001)-Partner SLoc(9002).... now the Storage Location 9002 is not HU managed,, the reason i gave this Storage location is, initially i gave 9001, but system said "Storage Location 9001 and 9001 must have different management systems". So now kindly tell me what is the purpose of the partner Storage location and which storage location should i give, as my partner Storage location across "1000-9001-????" thank you again for ur inputs.
    Regards,
    Samuel

  • To "Activate" Treasury and Loan Management

    Hi,
    We just upgrade our Development to ECC6.
    Is there a way on how we can "activate" a Treasury and Loan management in ECC6. If any?
    Thanks for any assistance,

    HI  Effandi
    I dont know  if  you still need this. 
    You need  to  activate the  EA  FINSERV  component  which is  Business  fucntion  set  available in ERP 6.0.  The activation switch is  available in SFW1  .  I assume you are licensed  to  use this product
    Thanks
    R Malolan  SAP  Treasury

  • How to incorporate training and event management module in ess1.0

    Hi all,
    I am implementing ess1.0 on EP6.0, NW7.0, ecc6.0.
    now in ess1.0 i could not find traing and event manag. module, but i found it in ITS version of ess.
    how can i incorporate 'traing and event manag' module in ess1.0??
    do i need to download two version of ess?...i doubt if its feasible!...can anybody guide me on this?
    I am new to portal, and hence trying to learn thing in EP ESS...please throw in your help ASAP
    Regards,
    JJ

    hi all,
    can anybody please throw some light on the above query?
    i m trying to search in forum but i am unable to find any reasonable answer to this.
    Regards,
    JJ

  • How to activate Career and Job at ESS/MSS

    I need to activate Career and Job section ?
    How do you do this ?
    With regards,
    Gopala

    You need to know which release you are on first ie WD JAVA OR WD ABAP as Jwala stated and then check roles assigned to the user Check in LPD_CUST > ESS MENU > read here for example http://help.sap.com/erp2005_ehp_05/helpdata/en/cd/1c7eb674214a3b8b62e6fe7f4bb0cf/content.htm?frameset=/en/25/340b0507434193adbfe3f8fc8896c7/frameset.htm

  • I'm trying to update my iPad but it's telling me to not enought storage and saids manage storage I do that but no change

    I'm trying to update my iPad but it's telling me not enough space manage storage I think I'm doing it wrong because it's not changing

    Open the Settings app & select General. How much Available space do you have?
    You may have to delete some files (videos) to obtain more space.
     Cheers, Tom

  • How to activate subversion and have svnX working on 10.5.1

    Hello,
    First of let me say that I am not a programmer, I do localization works, the developer with whom I collaborate, uses subversion and I manage access and files update transfer with svnX.
    From Tigers I upgrade to 10.5.1 .. I have installed Xcode 2.5 How to I install Subversion and have snvX see it, so that it works as it was working under 10.4.11 ?
    Do I need to install XCode 3.
    Many thanks for your help.
    Sergio

    Well I have finally solved the problem, I have install XCode 3, I have than re-install svnX from zero again and insert all the required data such as: Subversion server name, id, password.... and it has started nicely.
    I can non keep all my Repository and Working copies fully synchronized.
    I have to keep also XCode 2.5 because of iLocalize 3.7, otherwise it will generate Leopard only localization files, but this is a different issue.
    Thanks & Ciao

  • How to handle exeptions and authorization management in WEB SERVICES

    Hi all,
    Please send some documents or links on handling exceptions in web services and Authorization management also.
    Useful will be rewarded.
    Regards
    Neslin.

    i suggest to consult the documentation at help.sap.com, use the search function to the left or make your question more specific.
    regards, anton

  • Downlading Material stocks and its Value, storage location wise

    Dear Experts,
    As we are reimplementing SAP, we need to download the
    a)     stocks Plant and storage location wise for all the materials. Bcoz stocks are maintained in different storage locations.
    b)     Value of stocks for each material in the Plant and storage location wise, Bcoz stock qty will be different in different location and hence the value will be dependent upon the qty ?
    How can we extract this ? From which tables do we need to extract  this ?
    Can any one guide on this ?
    Regards     
    Javeed Ahamed.

    Goto MB52 report ,change the layout asper your requirement and extract to excel.To extract follow this
    go to menu bar
    system-- list-- save -- local file
    alternatively you can take it MBEW table also(se16n)

  • Automatic Inbound Delivery Creation in HU Managed Storage Location

    Dear all...
    I have created PO, packing instruction, and packing instruction determination.
    Storage location was set to HU managed already.
    Now I want do GR for PO (with MIGO transaction) which can create inbound delivery automatically, and also do the packing process.
    Which config/setting should I do?
    Thanks before.

    HI,
    In IMG-Logistics general-HUM-Basics-MM-IM-HU req for SL and default values for deliveries
    Select the plant and click Sto Loc there u can find HU ReQ, Check that HU Req Box.
    If you set this indicator for a storage location, the system does not create a material document when it carries out a posting, but creates a delivery via Shipping
    Regards
    Kk

Maybe you are looking for