How to activate / inactivate dataslice with a process chain ...
Hi,
we would like to activate and inactive a dataslice automatically for example by means of a process chain. Does anyone has experience with this ...
Reason is that we have a forecast version with actuals and plan combined (very different structure between plan and actual data) and we want to load actuals + initial budget in a forecast version, which is changed in IP afterwards. The unit rate calculation is difficult to be performed in the load mechanisme, but easy to calculate with FOX. Therefore after loading, we want to execute a planning sequence for which the dataslice needs to be temporary inactivated ...
Dries
Hi,
In the table UPC_DATASLICE, if the the value of the field INACTIVE is 'X' for the planning area and the data slice you are working on, it means that that particular data slice is inactive.
So create an exit FM to make the INACTIVE field value as 'X' for the dataslice and the planning area you want.
Call this exit FM in the process chain.
After ur processing is done, run another exit of same kind which reverts back these changes, which will activate the data slice again.
Bindu
Edited by: Bindu on Jun 20, 2008 10:43 AM
Similar Messages
-
Hi there, can anyone tell me how to activate my iphone with 2g network?
hi there, can anyone tell me how to activate my iphone with 2g network?
hi buddy, thnks for coming out to help me. so here we go.
im using a vodafone connection and i made a dupilcate of that connection and made a nanao sim the will suit in iphone.
after inserting its showing "To activate iphone"
and below that 2 buttons are given as
Try using Wi-Fi
Try again over cellular
and i dont have a wifi connection.
but i have 2g connection in my number.
on the top of iphone there is an "E" beside the range bars. obvioulsy might be Edge.
When im selecting Try again over cellular then its showing could not activate.:( -
How to activate ipod touch with no apple id
how to activate ipad touch with no apple id &password i don't have proof of purchase
Can't be done. You need an internet connection to activate an iPod after restoring.
If your restore via wifi (settings>General>Reset>Erase all setting and connect) yo either need to connect to the internert via wifi or connect to a coputer and setup via iTunes. The computer requires an internet connection
- If you restore via iTunes
iTunes: Restoring iOS software
The computer needs an internet connection -
How to find sql statement with Unix process pid
Hi
how to find sql statement with Unix process pid
is there any view to find that.
please if so let me know
Thanks in advancethis is how I am doing this:
oracle 7352340 7459066 0 07:47:10 - 0:00 oracleJDERED (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
oracle 7459066 5386396 2 07:47:10 pts/1 0:01 sqlplus
select sid,serial# from v$session where process='7459066';
SID SERIAL#
2178 6067
select sql_text
from
v$sqlarea a,
v$session b
where a.hash_value = b.sql_hash_value
and b.sid = 2178
; -
How to activate iPad air with t-mobile
how to activate iPad air with t-mobile service
Contact t-mobile where you are. Probably easiest to go to one of their
stores or kiosks to sign up for a data plan and get an appropriately sized
sim. -
Problem with a process chain transport
Hi all,
I have a problem with a process chain transport, I transport it but when I see the changes in testing environment I dont see it, I did it four times but nothing happen and I dont have errors.
Can anybody tell me how to transport a process chain.
Thanks.Hi Federico,
When you tranport Process Chains, initially chains will be available under "Not Asigned" node in RSPC Transaction. The transported chains wont be get highlighted automatically. Manually need to open the chain in update mode and activate it on Quality.
Hope it will help you to resolve the problem.
Regards,
Raji -
How to identify who ran the last process chain?
Hi all,
How to identify, who ran the last process chain for a PROCESS CHAIN NAME xyz in the production system?
ThanksHello,
Go To RSPC1 give your process chain name (Go to LOG View ) there you will get Date selectin screen (give This Month and last Month or as per your reqirement) there you can see who ran the process chain with ID.
Regards,
Edited by: Subbu_Amar on Oct 13, 2010 5:01 AM -
How to Delay an Event in a Process Chain
Hey,
We have a scenario in which we need to schedule a process chain in such a way that,the main chain contains the DSO load and the local chains contains the Cube load (One for NA and other for EU).
I want to schedule it in such a way that two local chains of the main chain should be triggered at different times.hi...
I think its getting pretty complex....instead of writing programs..use simle metachain thing which will solve your issue with simple process chain design.
You have :
Main Chain
{Dso load
Local Chain A(Eu) Local Chain B(Na)
Now what you want is on the first run the main chain should trigger and only Local Chain A trigger.
While on second run
Main chain + Local chain B trigger.
the simplest soultion
Create 2 Metachains like below:
PC1.
Main Chain X
{Dso Load
Local Chain A(Eu)
PC2.
Main chain Y
{Dso Load
Local Chain B(Na)
Now create metachain to combine
Main Chain
{PC1
PC2
So PC2 will start only when the PC1 has finished.
Let me know if it is feasible for you.
Regards,
RK -
How can you configure mail settings in process chains?
HI Experts,
please let me know how can you configure mail settings in process chains?Dear Suman,
To initiate the mails we first need to have SMTP connection. To check the same go to so00 and try sending mails to ur ID. If is successful it states that u have the SMTP access.
To create mails to Process chains:
Right Click on the Process varient select the Create Message in the context menu.
Select the type of mail i.e for successful, Error, Anyways.
Then follow the screens.
Note: The recipient type should be Via Internet.
Hope this helps u.
Regards,
Kishore.Pulla -
Relating a Request Number with its Process chain
Hi experts!
Do you know if there is anyway (with tables) of relating a "Request number" with its Process chain?
Thank you very much in advance!Hello
I guess there is no direct way, but you can get it by following:
1) From table RSREQDONE, you can get infopak name by giving a request no.
2) Then from table RSPCCHAIN, For Type = 'LOADING', VARIANTE field give the Infopackage name and it will give u the PC.
Regards,
Shashank -
How to Activate Datastore loaded with Transformation.
Hi Gurus!
When I used update rules and infopackages to load an ODS (with activate data flagged) loaded records were automatically activated.
Now I'm starting to use transformations and when I load data to Datastores I have to manually activate loaded data.
Is there any way to activate automatically loaded data??
I found how to do it for cubes but not for Datastore objects...
Thank you.No u cannot activate automatically on Netweaver 7.0 excepting only in Process Chains.
<b>Check out the below note</b>
Note 946572 - "Activate data automatically" option without result.
Symptom
While working with a DataStore object, you have activated the option "Activate data automatically". However, after a request is successfully loaded, the activation does not start automatically.
Reason and Prerequisites
The program logic has been changed.
In the case of NW2004s, the "Data Transfer Process" (DTP) was introduced as a new technology for loading data. Requests that were loaded via a DTP to a DataStore object are no longer automatically activated.
Solution
Use process chains to automate data activation. -
How to activate a JButton with right-click?
If I create a JButton and add an ActionListener, I can activate the button with a mouse left-click but not with a mouse right-click.
I've looked at other posts related to this topic. Some people have said that the default is that either a left- or right-click will activate a JButton but I can't get this to happen.
If I add a MouseListener to the button, I get mouse events for both left and right clicks (in mousePressed() for instance) but only the left-click goes on to activate the JButton.
I'm using Java 1.4 with Windows 2000.
Thanks in advance for any help.
-RickI use Windows 98, that's what I get too. I'm pretty sure that's normal behavior. If you want right clicks to be processed as well, use this code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class BothClick extends JFrame implements MouseListener
JButton clickMe;
public BothClick()
super("Test");
setSize(300, 300);
clickMe = new JButton("Click Me");
getContentPane().setLayout(new FlowLayout());
getContentPane().add(clickMe);
clickMe.addMouseListener(this);
setVisible(true);
public void mousePressed(MouseEvent e)
clickMe.doClick();
public void mouseReleased(MouseEvent e) {}
public void mouseEntered(MouseEvent e) {}
public void mouseExited(MouseEvent e) {}
public void mouseClicked(MouseEvent e) {}
public static void main(String[] args)
new BothClick();
} -
How to activate a valve with a switch ?
I am going to work on the automation of a miniature punch press using compressed air and also a pneumatic valve, I was wondering how I would be able to activate this mechanism with a switch?
Also, what would be the best method to activate this set up ?Can you provide more information about the valve itself? For example, is it expecting an analog signal or a digital signal? If this is an analog setup, the valve would probably expect a DC value that represents a certain pressure. You would need a variable voltage source (a DAQ card for example) to provide the appropriate signal to the valve. A switch would most likely not be necessary. If the valve is expecting a digital signal, then you will need a DC power supply set to the digital high voltage (5V for example) and then use the switch to regulate the state of signal.
Brian R.
District Sales Manager
Washington DC
National Instruments -
How to delete InfoCube data in a Process Chain with restictions?
Hi Friends!
My process chain is a full update in the cube
I need delete the data everyday except the last day in the month.
How can I do this in 7.0 release?
Thanks!Hi,
Please use the option Delete of overlapp requests process type
Take the following conditions as :
1) Only delete request from same DTP
3) Only Full DTP
3) Only Delete DTP requests from same souce
Selections are
Overlapping
Request date
Is in the current month
based on the month
Hope this helps out
Thanks
PT
Edited by: PT on Feb 23, 2010 7:18 PM -
HT4865 How to activate my phone with the apple id
how to activate my phone without the apple id
I know it's the right apple i.d. and the password is right because I can get into icloud on the computer.
Maybe you are looking for
-
Dynamic Paypal button for PDF fill-in form
Hi there, I need help with adding a Paypal button to a PDF fill-in form. The Paypal button should feed through the Invoice Number field (a text field) and the invoice total amount (also a text field) to Paypal and add this to the Paypal cart (not 'bu
-
Segment E1ADRM4 in idoc SHPMNT05 only allows 10 partners
We have to post an extension of Idoc type SHPMNT05, with all the shipment and delivery information. For a concrete shipment, we have 15 different partners. However, segment E1ADRM4 doesn't allow more than 10 iterations. Why the system only allows to
-
Photoshop 4.0 - "not enough memory (RAM) to launch Photoshop"
My venerable Photoshop 4.0 has outlasted many of my computers, and endured numerous hardware upgrades. (Thanks, Adobe!) However, this problem has occurred more than once, and usually when I changed the RAM. Of course, I never remember what the fix is
-
Config steps for low value assets
could any one provide me the config steps for low value assets. regards Ramana
-
Changes required in date format
Hi All, I have downloaded data from one database table into excel sheet.The date format of the downloaded data in the excel is yyyy.mm.dd but I want the date format as yyyymmdd (8 char in length).Can any one help me in this regard? Waiting eagerly fo