How to activate iP camera over Automator?

I want to use Automator to take a picture from iPhone camera and save this picture to my hdd, is it possible to use automator or apple script to activate camera in iPhone?

Similar Messages

How to activate iPhone camera with Automator?

I want to use Automator to take a picture from iPhone camera and save this picture to my hdd, is it possible to use automator or apple script to activate camera in iPhone?

There's an app for that?
http://www.tuaw.com/2009/02/04/app-makes-time-lapse-photography-easy-for-iphone/
Regards,
Colin R.

How to activate web cam on Satellite C660-C660D?

I cant get my webcam built in to work on Satellite C660D/C660. Do I need to switch it on or download a driver?
Help

Hiya
is the operating system the factory installed system eg:- the system that was installed when you bought it
or when it was purchased from new ??
if so hopefully you could press the start key then all programmes and search for toshiba and click on them and you may find the webcam
also if it is the factory os then you should be able to go to:-
start programes or all programes toshiba/toshiba recovery/software
and re install the webcam if it is not working
this link i believe will take you to a site to download the user guide if this is not in your programes
http://www.pdfuu.com/toshiba-satellite-c660-manual-users-guide-and-troubleshooting.html
or go to :- www.toshibasupport.co.uk
then use the dropdown boxes to find your model no and then find your os and then the webcam driver
you could always use skype to take photos with your webcam or download a free app ( desktop webcam )
i hope you can get it sorted

How to activate camera attributes in the MAX / LabVIEW

Hello,
I have created an icd file for a VieWorks camera. Therefore I used the camera file generator tool of NI. In this tool I can setup camera attributes. After creating the file, I opened the MAX and selected the camera in the IMAQ devices. The attributes I generated where correctly shown. The question now is how to activate the attributes. For instance I created an attribute to activate / deactivate the FAN. When I select the attribute in the MAX and set the value to ON, nothing happens.
This also fails when I use the SetCameraAttributes.vi in labview. I use LV2009 and IMAQ 4.6.1
Does anyone have any suggestions?
Regards,
Marc Vanmaris

Hello,
Just check in MAX that the "Serial Enable" is selected. It seems that the serial command is not send to your camera.
Hope this helps

How can I activate the camera on my iPad?

How can I activate my camera on my iPad

Russ_02 wrote:
How can I activate my camera on my iPad
(1) Camera is already activated.
To use it, launch an app that operates the camera and tap the virtual shutter button.
(2) For more specific help, see the iPad User Guide for iOS 7.1 Software.
(If your internet connection is slow, it may take a minute for this link to open.)
Some apps that come with your iOS 7.1 and their User Guide references are:
Camera: Chapter 12, starting on page 68
Photo Booth: Chapter 19, starting on page 86
If you live in a country that does not block it, FaceTime: Chapter 9, starting on p. 58.
View photos you have already made in Camera Roll: Chapter 11, starting on page 63.
(3) If you want to explore other camera possibilities, you can search the iTunes Apps Store for other apps that can use your camera.
Message was edited by: EZ Jim
Mac OSX 10.9

How To Activate Work flow Templates for Campaign Automation

Hi friends,
i created all settings for campaign Automation.when i click start process the system showing message like campaign has not started.i am not sure about weather work flows should activate for starting campaign automation.
can u please let me know how to activate work flows and what is the path to activate work flow templates for campaign automation
Thanks&regards
kishor kumar

Pls forward to me as well, facing the same problem unable to start Campaign Automation.

How to activate camera option in message in ios 5

how to activate camera option in message in ios 5

The MMS setting appears because of the carrier file installed on your phone, assuming your carrier supports MMS, which you say your carrier does. First try restting your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then releae.
If no change, restore your phone from backup. Follow this by syncing your iTunes content back to your phone.

How to activate bluetooth on iphone 5s

how to activate bluetooth on iphone 5s

try this one also. . thanks
Personal Hotspot
Use Personal Hotspot to share your iPhone Internet connection. Computers can share your
Internet connection using Wi-Fi, Bluetooth, or a USB cable. Other iOS devices can share the
connection using Wi-Fi. Personal Hotspot works only if iPhone is connected to the Internet over
the cellular data network.
Note: This feature may not be available with all carriers. Additional fees may apply. Contact your
carrier for more information.
Share an Internet connection. Go to Settings > Cellular and tap Set Up Personal Hotspot—if it
appears—to set up the service with your carrier. Chapter 3 Basics 34
After you turn on Personal Hotspot, other devices can connect in the following ways:
• Wi-Fi: On the device, choose your iPhone from the list of available Wi-Fi networks.
• USB: Connect your iPhone to your computer using the cable that came with it. In your
computer’s Network preferences, choose iPhone and configure the network settings.
• Bluetooth: On iPhone, go to Settings > Bluetooth and turn on Bluetooth. To pair and connect
iPhone with your device, refer to the documentation that came with your computer.
Note: When a device is connected, a blue band appears at the top of the iPhone screen. The
Personal Hotspot icon appears in the status bar of iOS devices using Personal Hotspot.
Change the Wi-Fi password for iPhone. Go to Settings > Personal Hotspot > Wi-Fi Password,
then enter a password of at least 8 characters.
Monitor your cellular data network usage. Go to Settings > Cellular. See Cellular settings

TS2771 My ipod touch 4g doesn't work i didnt have charger at first and when my cousins came over i charged it with his it was full and the next minute it was empty. it gave me the warning sign. After tht it shut off and i ot my charger today and it wont t

My ipod touch 4g doesn't work i didnt have charger at first and when my cousins came over i charged it with his it was full and the next minute it was empty. it gave me the warning sign. After tht it shut off and i ot my charger today and it wont turn on it also gave me a blue light which was kinda like an electric shock. Someone help plz

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

MY APP STORE IS NOT WORKING.HOW TO ACTIVATE IT?

MY APP STORE IS NOT WORKING.HOW TO ACTIVATE IT?

Hi sahaabhijeet,
The resource below explains how to use the App Store on your iPhone:
App Store Frequently Asked Questions (FAQ) - Apple Support
http://support.apple.com/en-us/HT2001
The App Store is a place where you can download new applications for your iPhone or iPod touch. You can browse the App Store on your computer with iTunes, or by tapping App Store on your iPhone, iPad, or iPod touch.
Do I need to sign up for a new account to shop the App Store?
If you already have an iTunes Store account, you can shop the App Store. If you do not have an iTunes Store account, you can create one using iTunes. Verify that the country flag at the bottom of the iTunes Store home page displays your country, then choose Store > Create Account. Click here for a way to set up an iTunes App Store account without a credit card. You can also create an iTunes Store account directly from your iPhone, iPad, or iPod touch by following these instructions.
Accepted payment types
Shopping the App Store requires an iTunes Store account. When you create an iTunes Store account, you must provide a payment method for your purchase. The available payment methods vary by country, but typically you can use credit cards, gift cards, store credit, or PayPal.
In countries where the iTunes Store only sells applications, the accepted payment methods are Visa, MasterCard, and American Express. Other payment types such as gift cards, store credit, monthly allowances, and PayPal are not accepted. Depending on your App Store country, prices are listed in either US Dollars or Euros.
What can I purchase from the App Store?
At the App Store, you can browse and download applications for your iPhone, iPad, or iPod touch. Applications from the App Store can be downloaded to, but not used on, your computer. To use an application from the App Store, simply sync it to your iPhone, iPad, or iPod touch. The App Store is also available on iPhone, iPad, or iPod touch1 and works over mobile phone networks and Wi-Fi, so you can download applications wirelessly and start using them instantly.
To use applications or the App Store with iPhone, iPad, or iPod touch, you must have iOS 2.0 or later installed on your iPhone or iPod touch, and iOS 3.2 or later on iPad.
Some applications are not available in all countries. Application availability and pricing are subject to change.
Cheers,
Judy

Acrobat 9 Pro Extended: How to activate logfiles?

Dear members
Does someone now how to activate or read out logfiles of a 3DPDF conversion?
I would like to convert Catia V5 data via command line, but cannot find or activate logs...
Currently I'm only using the OLE objects "AcroExch.AVDoc" and "AcroExch.App". In the API reference at livedocs.adobe.com there is nothing about it.
Thanks in advance for your help.
Regards
hanseat82

That's clear, we are calling the Acrobat over OLE via Perl, scrap:
use Win32::OLE;
$infile = $ARGV[0];
$outfile = $ARGV[1];
$NOSAVE = -1;
$PDSAVEFULL = 1;
## Create Objects
$avdoc_obj = Win32::OLE->new('AcroExch.AVDoc') || die "new: $!";
$app_obj = Win32::OLE->new('AcroExch.App') || die "new: $!";
## Open Inputfile
$avdoc_obj->Open($infile, $infile);
## Get PDF Document as Object from Inputfile
$pddoc_obj = $avdoc_obj->GetPDDoc();
And I found the Java code from you, Adobe:
#            catch (ConversionException e)
#                System.out.println(e.getErrorCode());
#                System.out.println(e.getConversionLog());
Can you give me name me the import module of class "ConversionException" or in general how to go on with that?
Thanks and regards
hanseat

Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN A

Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN AT LEAST ONCE TO ACTIVATE THIS FEATURE. I wonder what that means?
I use a lapto (windows 7) 64-Bit operating system.
Thank you,
my email is: [email protected], if you send me the answer to my query

You need to activate Photoshop.
Mylenium

I restored my iphone 4 using i tune and now it is asking for activation. How to activate it..?

I restored my iphone 4 using i tune and now it is asking for activation. How to activate it..?

Setting up and activating iPhone
To set up and activate iPhone, turn on iPhone and follow the Setup Assistant. The Setup Assistant
steps you through the setup process, including connecting to a Wi-Fi network, signing in with or
creating a free Apple ID, setting up iCloud, turning on recommended features such as Location
Services and Find My iPhone, and activating iPhone with your carrier. You can also restore from
an iCloud or iTunes backup during setup.
Activation can be done over a Wi-Fi network or, with iPhone 4S or later, over your carrier’s cellular
network (not available in all areas). If neither option is available, you need to connect iPhone to
your computer running iTunes for activation. You might also read http://support.apple.com/kb/TS3424

How to activate or restore again my iphone

how to activate or restore again my iphone..i am located here in the philippnes

You can't activate it or it's not working?
Settings > General > Accessibility > Switch control > Switches - Add new switch - Camera - Right head movemen.

HT201407 How to activate my i pad 2 after restoring

how to activate my i pad 2 after restoring

Full Error is
"Activation Failed
This iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement."
The device has not been jail broken nor has my computer jail broken any devices. The device was working fine on wednesday and I did a restore and wipe, to switch from one user in the family to another. When I went to restore, I received this error. I have been through the restore and update process (says updating firmware, etc.) but at the end of the process I get the same message.
My big concern is this is an iPad 2 I bought new years ago and I'll be upset if the Apple Store folks say, "sorry, hardware issue."
Dan

How to activate iP camera over Automator?

Similar Messages

Maybe you are looking for