How to activate netweaver in ECC 6.0 EHP6 system

Dear friends,
We are using EHP6 IDES server, in that i want to use net weaver , please let me confirm my points.
1) How to activate netweaver in ECC 6 with EHP6 server.
2)how to create link for that server access from browser .
3)How to activate webdynpro .
Please provide me step by step procedure for activating NetWeaver in EHP6 server

1 - You don't activate Netweaver in an ECC system. Netweaver is a technology platform and products are based on that.
2 - Configure Web GUI. Refer to this blog - http://scn.sap.com/docs/DOC-29485
3 - If your question is about activating Web Dynpro services then read this link
Activating Web Dynpro Services - Search - SAP Library
Regards
RB

Similar Messages

How to activate CIN in ECC 6.0

Hi Guru,
Can anyone tell me how to activate CIN in ECC 6.0 in case of new implementation.
Regars
S

Hello,
There is no need to activate the cin In the ECC 6.
But you have to activate for your fiscal year.
Regards
Ravi

How to activate JVA in ECC 6.0

hi,
i am learning by myself joint venture accounting,i am not sure whether its apart of IDES ECC6.0 or not, if it is part of ECC could any one please guide me how to activate JVA ,if it is not could any one please advise me which is the better way to practice JVA, is there any one providing online sandbox servers for practice,thanks

Hi Sri Ray,
Please find below screen shot, based on screen shot you can activate JVA accounting for your company code.
Please follow below instruction to activate JVA.
1.If Joint Venture Accounting is installed, it is not necessarily used for all company codes. To activate JVA for a company code, it has to be switched on in FI customizing but also in JVA..
The activation is done with this transaction. For the activation it has to be decided which JV ledgers should be used. The JV standard ledger is 4A for data collection and 4B as billing ledger. Every ledger can have one transaction currency and up to two local currencies. Since FI can have up to three local currencies, JV offered also the possibility to use an additional ledger - 4C as additional data collection ledger and 4D as additional billing ledger. But this additional ledger should only be used if necessary.
2.Please check also the currencies for the JVA ledger. The currencies for the collection ledgers should be identical to the currencies for the billing ledgers (e.g. currencies for ledger 4A are equal to currencies of 4B). Also those ledger should only use the currencies delivered from FI. If an additional curreny is added to the JV ledger, please keep in mind that those currencies are converted on line level (actually from FI-SL) and those currencies might not balance per document.
Thanks
Mallikarjuna

How to activate business coontent datasources in r/3 system

Hi Experts,
Could any one please provide me the steps for installing business content data sources in R/3 system ,
I am installig PM
Thanks in Advance,
Nitya

Hi,
You could try this,
1) Go to tcode RSA1
2) Click on the BI Content link in the left navigation bar
3) Click on the Packages link in the left navigation bar
4) Find +Business Content: RPM (Resource & Program Management)
5) Expand folder to MultiProvider and double-click on 0RPM_MP01
6) In right-navigation pane, select Grouping > In Data Flow Before and After (this will take several minutes to complete)
7) Expand folder to 0RPM_MP01 > InfoObject
8) Uncheck all items that have a green square under Active Version Available (hint: these are the only items that are checked that you should be able to deselect or uncheck)
9) Repeat for InfoArea, InfoCube and Query Elements (the only one that may already be installed in your case is the InfoArea)
10) Repeat Steps 5-9 with the exception that you'll be doing InfoCubes now by expanding the InfoCube folder and double-clicking on all of the InfoCubes except 0RPM_C01.
Regards,
Kiran

How to activate an InfoObject in background in target system

Hello,
after I made changes to an characteristic InfoObject in development system I have activated it in background, this has run the background job IOBJ_ACTIVATE. When I transported the IO change and activation into the test system, the IO has been activated normally and not in background, therefore the job IOBJ_ACTIVATE didn´t run.
Is there a possibility to transport the activation of an InfoObject in background into the target system?
Thanks in advise.
Best regards,
Meba

Hi Meba,
Since Job definitions contain system specific parameters (target host, user, program, operation mode, ...). Therefore it wouldn't make sense to develop a transport tool.
For similar reasons, copying a job across clients is not foreseen. The following trick, however, is possible: Login to the target client (the one, where the job is to be copied to). The user must have job administrator authorizations. Then using transaction SM37 all jobs in all clients can be displayed. With the "Job > Copy" option a job can now be copied from the source client (only steps, no start time).
or
Try to create an ABAP program to export and import jobs
Refer : Copy Background jobs to another systems.
Hope it helps.
cheers,
vikash

How to activate the IS-Retail in ECC 6.0 R/3 system

Dear Guru's...........
Can any one tell me how to activate the IS-Retail in ECC 6.0 R/3 system.
I have IDES system in my home I donu2019t know how to activate retail settings.
Please suggest me how to do that.
Regards
dnr

Dear DNR,
SPRO --> IMG --> Activate SAP ECC Extensions (Or, T. Code: SFW5)
Go to Tab: Industry Business Function
Select Business Function Set: ISR_RETAIL - SAP Retail
A new line will be appeared below.
Current Status will be OFF. Click within Field: Current Status. It will pop-up a list. Select "X - ON".
Important: I've read somewhere - Once Activated, cannot Roll-back.
Best Regards,
Amit
Note: For more, go to - http://help.sap.com
Follow the menu tree: SAP for Industries/SAP for Retail
Click on the link for "SAP industry Specific Components"
Choose the document "Business Function Set Retail"
Also,
Check https://websmp103.sap-ag.de/erp-upgrade --> mySAP ERP 2005: Updated upgrade FAQs, there you will find the list of Industry solutions which are supported by mySAP ERP.
https://websmp103.sap-ag.de/~sapidb/011000358700006168472006/
You must this thread in to [Forum: SAP Enhancement Packages|/community [original link is broken]; OR [Forum: Enterprise Resource Planning (ERP)|Enterprise Resource Planning (SAP ERP); as Nowhere, it is related to SAP SD.

How to activate a material once it is created using MM01 in ECC 6.0

Hi,
How to activate a material once it is created using MM01 in ECC 6.0.
i am encoutering a error " the material test1 does not exist or is not activated " when i want to display it in MM03.

hi,
the material might not be created.
check updation might be failed.
before saving check for incomleteness.
try to create again and check.

How to activate delta download for BP from ECC to CRM

Hi,
i have completed BP initial download from ECC 6.0 to CRM 5.0.
i dont know how to activate the Delta download?.
Plz anyone tell me the procedure.
regards
geetha.g

Hi Geetha
Synchronization download allows you to synchronize inconsistent datasets on various databases. This can be controlled in time slots or can be triggered manually.
1. Creating a Request
Choose Middleware -->Data Exchange --> Synchronization --> Define Requests.
To define a new data request, choose Display --> Change and New Entries.
Enter data for the request.
In object name enter CUSTOMER_MAIN
2. Starting the Request
Choose Middleware --> Data Exchange -->Synchronization --> Synchronize Objects.
A selection screen appears. Enter the objects to be synchronized or use F4 input help to select objects. Choose Execute to start synchronizing the data.
3. Monitoring Request
Choose Middleware --> Data exchange --> Synchronization --> Monitor requests
Enter an object name or a range of object names. Use the input help or of you want to display all the objects, do not enter an object name at all. Choose Execute.
Further help is available on http://help.sap.com/saphelp_crm50/helpdata/en/c7/95fc381478ab6fe10000000a11402f/frameset.htm
Hope this would help.
Regards,
Rekha Dadwal
<b>You gain a point for every point that you reward. So reward helpful answers generously</b>

How to activate all these functionalities

Hi,
I am on ECC 6.0 but not seeing following buttons, icons or processing options. These fucntionalities are listed as availble in ECC 6.0 but not able to trace them.. Let me know how to activate and/or locate them.
1. "Felxible Specs" pushbutton on Results Recording screen
2. On Results Recoring screen menupath Extras > Transfer Log for copying Inspection Results. Under Extras I see Error Messages list and then next option is Inspector, Date and TIme but no 'Tranfer Log' oeption which is I suppose should appear in between these two options.
3. Audit management transaction
4. Stability study transaction
5. Work overview for quality inspector like a cockpit
6. Flexible reporting - QMevaluations grahic display
Thanks

Hi ,
Please follow the given below link.
http://help.sap.com/erp2005_ehp_03/helpdata/en/42/fbded750e61febe10000000a422035/frameset.htm
Regards,Kundan

How to Activate Extended Rebate Agreements

HI All Gurus,
We are using the SAP ECC 5.0 Version.
My Client Requires certain features which can be handled through Extended rebate agreements.
As per the documentation.
Can Anyone help in how to activate the Extended Rebate Agreements.
Thanks in Advance
Sachin Dhiman

Hi sachin
1. change the time frame in tcode VBO1
2.. Update doc is VBOF
3. IF doing retro billing go to VFRB

Activate retail in ECC 6.0

Dear All,
Please guide 1. How to activate retail system in ECC 6.0 and 2. What are the differences after activating Retail and 3. Any other settings required in customization ?

Hello,
Please see information on Retail scenario in the following notes:
1075202 - FAQ: Setting the retail switch
1227242 -FAQ: Differences between material master & article
Regards,

HOW TO CREATE BADI IN ECC 6.0 with Enhanance Spot?

HI,
Anyone let me know how to create BADI in ECC 6.0 , which have mandtory to create enhanance spot before to create badi? I dont understand the concept of Enhanance Spot and what is the purpose to create that . Will u plz let me know step wise procedure to create badi ...
Thanks,
saurin.

Hi,
Implementing Business Add-Ins (BADI)
The use of object orientated code within SAP has lead to new method of enhancing standard SAP code called
Business Add-Ins or BADI's for short. Although the implementation concept is based on classes, methods and
inheritance you do not really have to understand this fully to implement a BADI. Simply think of methods
as a function module with the same import and export parameters and follow the simple instructions below.
Steps:
1. Execute Business Add-In(BADI) transaction SE18
2. Enter BADI name i.e. HRPBSGB_HESA_NISR and press the display
button
3. Select menu option Implementation->Create
4. Give implementation a name such as Z_HRPBSGB_HESA_NISR
5. You can now make any changes you require to the BADI within this
implementation, for example choose the Interface tab
6. Double click on the method you want to change, you can now enter
any code you require.
7. Please note to find out what import and export parameters a
method has got return the original BADI definition
(i.e. HRPBSGB_HESA_NISR) and double click on the method name
for example within HRPBSGB_HESA_NISR contract is a method
8. When changes have been made activate the implementation.
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
SEE THE LINKS REGARDING SPOT
/people/thomas.weiss/blog/2006/01/24/what-the-new-enhancement-framework-is-for-150-its-basic-structure-and-elements-for-beginners
/people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
Regards
Kiran Sure

How to configure APO in ECC 6.0..

Hi Experts,
Please anyone explain me how to configure APO with ECC 6.0.
what are all the prereqistic needed to activate APO in ECC 6.0.
thanks in advance.
Regards
Pradeep

if you download the bestpractices guide for SCM you will be able to see the section on Setup for Integration between SCM and ECC
http://help.sap.com/bp_scmv150/index.htm
B02 - connectivity might be a good document to start with

How to activate ABAP Dynrpo in SE80

Hi Experts,
I am using ECC 5.0, and I want to create a web dynpro using ABAP, but in SE80 transaction this option is deactivated, how to activate it ?

Hi Rajesh,
In ECC5.0 you can not work with webdynpro.
Its only avilable with Ecc6 versions.
Check this link also,
Re: ECC 5.0 or ECC 6.0?
Thanks.
Edited by: Viji on Apr 16, 2008 11:29 AM

How to activate a cube in business content of bi ?

how to activate a cube in business content of bi ?
Please search the forum before posting a thread
Edited by: Pravender on Apr 11, 2011 4:28 PM

hi ra
good question dear
if you want to activate cube in business content do this steps.
1).select your data source and maintain all the things in r/3 side.
2).then come to bi side .
3).t-code rsorbct.
4).you must have an idea about your app component .i..e that app belongs to sd or mm or hr or finance .
5).if it belongs to purchasing select infoobj and select supply chain management ,select purchasing.
6).select char and key fig,drag and drop it into right side component .
7).select info provider select supply chain management and select your cube .
8).how to find cube .that is cube like 0pur_c01,c02,c03,c04 like that select any of the cube and drop in to right side component .
9).now installation part.
10).select source system top side and select your source ecc 6.0, select component and select install/activate.
11).now your cube is ready to use .create package for full,initialize ,delta.ok
bye ....................samar reddy...

How to activate netweaver in ECC 6.0 EHP6 system

Similar Messages

Maybe you are looking for