How to Activate ping services in ECC system

hi ,
system connection was not fully tested
1.
SAP Web AS Connection
2.
ITS Connection
3.
Test Connection with Connector

Hi,
You just have to set the profile parameters that are described in the documentation that you should have read.
Regards,
Olivier

Similar Messages

How to enable ping service on java-stack only system

I have installed SAP NetWeaver 7.0 - Java Trial on local host.
How can you activate the ping service there?
It should work under "http://localhost:50000/sap/bc/ping"
(I know how to activate it with transaction SICF in an abap system, but I have java-stack only here, so I can't call transactions. I can only use the Visual Admin, right?, but there I could not detect a ping service so far)
More detailed:
I created system "SAP_WebDynpro_XSS". (this is necessary for connecting to ECC abap backend for ESS Packages) and set following parameter:
template:"SAP system using connection string"
     category: Web Application Server
          Web AS host name: chrisSAP:50000
          Web AS path: /webdynpro/dispatcher/
          Web AS protocol: http
But when I test the "SAP Web AS Connection" for this system, I got following error:
7. The Web AS ping service http://chrisSAP:50000/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
8. An HTTP/S connection to http://chrisSAP:50000/webdynpro/dispatcher/ was not
obtained successfully; this might be due to a closed port on the Firewall.
I guess step 8 did not pass because step 7 failed, and not because of a closed port or firewall (I made sure everything is open.)
The strange thing is that the connection test fails, but the connection seems to work fine!
I mean I can see the front ESS page in the portal when logging in with an ESS-user, and there are no errors in the log. If I change the SAP_WebDynpro_XSS parameters to some other made-up values, then the front ESS page does not come up and some errors appear with "SAP_WebDynpro_XSS" inside.
That proofs that the connection is working despite the failed connection test, right?. But what can I do that the connection test passes? It seems that somehow SAP has hardcoded the path "/sap/bc/ping" which usually exists on an abap system. But I have java-stack only, so how can I tell that the function that runs the test?
A system connection test fails, but the connection is working fine!
If someone could explain that to me...

Dear Srini Nookala,
thank you for your answer. Unfortunately I don't understand the relation of my question to your answer.
>> check with OSS note 1019335 SAP NetWeaver AS Java 6.40 SP21
I have Version 7.0 SP14. I read the OSS note, but there are around 100 changes listed. I read them all, but couldn't figure out one that has to do with ping and system test. So which sentence inside the note are you referring to?
>> The problem is due to JCo parameters configuration not properly, Ask Basis team, they will do it.
I am basis team. I configured the JCo properly as described in manual and tested them afterwards. They run successful. Also all the links that you gave refer to JCO connections about how to set them up and test them. But what have JCO connections to do with System-connection tests? As far as I know JCO-connections are not used for system connectivity tests. You can set them up independent. I understand that JCO-connections are used for getting data from backend servers. But the system "SAP_WebDynpro_XSS" is defined for determing the webdynpros on localhost (frontend, not backend).
So please can you explain me what JCO-connections which refer to remote hosts have to do with a ping service on local host that cannot be reached? And which part would be not configured "properly"? Timeouts? user?
To define my question more properly:
Is it possible to make the connection test work on a java-stack only host for a system that refers to itself (localhost)? Or is it a known bug?
Some sub-questions
Am I using the right system template (I am using "SAP system using dedicated application server")
I have no abap on local host (chrisSAP). Only java stack. Usually path ..sap/bc/ping refers to an abap system, right? So in my opinion I have 3 possibilities:
- install abap-stack on local host (portal) and activate ping service.
- somehow install a ping service that runs under the given URL in Visual Admin (how?)
- somehow tell the connection test to skip pinging and continue test. (How?)
Any additional advice would be highly appreciated.

How to install ftp service on the system?

OS: SuSE Linux Enterprise Server 8
How to install ftp service on the system?
How to check and modify to use it?
I am not able to use FTP.
Regards,
D

Rohit,
If its about installation/Deployment of Agent- then its through SDM,
'configuration' can be manual or Atuomatic:
Manual-> refer the installation Guide which digesh has mentioned -(from page 20).
Automatic- Its through Diagnostics Setup through Solman -(Its bit easy).
Thanks,
Jagan

How to develop Ping Service in Oracle Service Bus

Hi all,
I want to develop a ping service in OSB which will ping all the End-point URLs and Databases ( i.e It will do the health check of the end point URLs ) .
when it is found any End Point URL is not reachable it should shutdown all the Osb Projects(or Proxy's) which is using the End-point URL and when ever the
End-point URL is up it should Bring the Osb Project( or proxy) up to get the requests .
I want to implement this for Asynchronous services or JMS services.
Can we shutdown any Proxy or OSB project like BPEL process ??
Thanks
Phani

I want to implement this for Asynchronous services or JMS services. For jms transport, instead of disabling the proxy you can make a java callout to pause the queue for consumption. This should a very small piece of java code using jmx api to pause the consumption.. So instead of designing a 'ping' service, what you can do is when an error occurs on the route node, do the following in the route error handler -
- Configure an 'alert' action to notify to the support about the issue, This could be done in different ways depending on how your osb is integrated to the problem management system.
- Pause the queue for consumption using the java callout.
Support can manually come and resume the consumption on the queue after the issue is fixed.

How to use web service in ECC 6.0

Hi.
I found some WSDL in "SDN ES Workplace".
Anybody know how to use this WSDL ?
For example, I want to use 'Query Sales Order' web service and I found WSDL in "SDN ES Workplace".
What's next step to use this web service ?
Regards, Arnold.

Hi Austin,
Link provided for mySAP ERP Enterprise Service Package ECC-SE 600, does not work. My company is SAP customer and I am SDN member.
Do I need some special login or membership to download ES packages?
I also understand that I can access the Enterprise Service from the ES Workplace (implementation) and for that I have to Apply For an Account. I applied for an account at this link https://www.sdn.sap.com/irj/sdn/esareg .
After applying for an Account should be getting an email with user Id/password OR I can use the my Service Market Place ID?
Tried entering the my service market place Id, does not work.
Thanks,
Abhay

How to generate CCMS report from ECC system

Hi,
I have implemented CCMS between my SAP ECC system 6.0 and SAP SRM7.0. How can i generate CCMS report for my SRM system from ECC system. Can any one please tell me the steps to configure CCMS between my ECC (CEN) system and SRM 7.0 ABAP system.
Regards,
Pradeep J

Pradip_jag12 wrote:
> I have implemented CCMS between my SAP ECC system 6.0 and SAP SRM7.0.
>Can any one please tell me the steps to configure CCMS between my ECC (CEN) system and SRM 7.0 ABAP system.
Hi,
Contradicting statements.
However check the link for CCMS Configuration:
http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
Ideally the CEN system should be a double stack i.e. best if its a solution manager.
Regards,
Srikishan

SRM - Shopping Cart - how to debug BADI BBP_CREATE_BE_RS_NEW in ECC system

Hi,
We are using BADI BBP_CREATE_BE_RS_NEW (ECC system).
We put external breakpoint on this BADI. Made sure also that the BADI is activated.
Our problem is it didnu2019t stop on our breakpoint. Authorizations to debug/etc are there.
When it was not possible to debug when shopping cart is created in internet link (SRM), we used tcode BBPSC01 (ECC system) to see if we can go to the BADI and debug it. However still the program did not stop at break point at the ECC side.
(SRM Module shopping cart)
How do we debug this BADI in ECC? Anything to set up or ?????
SRM_SERVER 550 0013 SAPKIBKT13 SRM_SERVER 550: Add-on installation
SRM add on to ECC 6.0
Looking forward to hearing from you as soon as possible.
Thanks.

Hello,
User calling BAdI in ECC must be a dialog one in order to be able to debug with.
Check whom user is called in R/3 by having a look at RFC transactional assigned to your R/3 backend in SRM SM59 transaction.
Then, in R/3, modify this user as a dialog one (type 'B') then put an external break-point for this user.
Regards.
Laurent

How to activate HTTP port in R3 system?

Hi All
In SMICM transaction i am not getting Http port. I think its not activated.
Can anyone please tell me how to activate HTTP port in R3.
Please help me?
Regards
Sowmya

Hi,
You just have to set the profile parameters that are described in the documentation that you should have read.
Regards,
Olivier

How to activate wastebasket service in KW?

Hi Gurus,
we are just starting to use KM - i found out, that we can use a waste basket, so that we first can transfer files which we would likt to delete to the wastebasket.
Could you please explain me the functionality and also, how we can activate the wastebasket service. We receive the error message, that the wastebasket service is not active for any repositories.
Thanks a lot!
XmchX

Hi Denis,
I'm new in the KW and really need the help on how to transport template into the system.
I read the configuration guide and the note 578283. I got the template file (2 Zip files), but not really sure how to transport them to the KW. (Even my Basis guy also did not know this!!)
Please give me some guideline on this please...
Thank you so much and hope to hear from you soon.
Adi

How to Check Enhancement Pack of ECC system

Hi Experts,
I want to check enhancement pack of My SAP R/3 ECC 6.0 system.
Where can i find this information can you please help.
In System --> Status --> in component version i can see "SAP ECC 6.0".
On click of the button provided below this component version , i can see following details:
SAP_ABA             700                     0011     SAPKA70011     Cross-Application Component
SAP_BASIS     700                     0011     SAPKB70011     SAP Basis Component
ST-PI             2005_1_700     0005     SAPKITLQI5     SAP Solution Tools Plug-In
PI_BASIS             2005_1_700     0011     SAPKIPYJ7B     PI_BASIS 2005_1_700
SAP_BW             700                     0011     SAPKW70011     SAP NetWeaver BI 7.0
SAP_AP             700                     0007     SAPKNA7007     SAP Application Platform
LCAPPS     2005_700                     0003     SAPKIBHD03     LC Applications (LCAPPS) 2005_700
SAP_APPL     600                     0006     SAPKH60006     Logistics and Accounting
from this information can you please help me identify my SAp R/3 ECC 6.0 system's enhancement pack version?
Regards,
Ashish Shah

SAP_APPL 600 No EHP
SAP_APPL 601 EHP1
SAP_APPL 602 EHP2
SAP_APPL 603 EHP3
SAP_APPL 604 EHP4
SAP_APPL 605 EHP5
SAP_APPL 616 EHP6
SAP_APPL 617 EHP7
Sorry if i am wrong....thats how i find it...i am an ABAPer.
Regards,
Vishnu

How to call data from backend ECC system in Gateway Hub System?

Hi Experts,
We have a scenario where the GR process has to be done on Mobile app. We have a SMP 3.0 and Netweaver gayeway deployed as Hub.
I really need quick pointers on how should we go about this?
My queries are mentioned below:
1.I don't see SAP data in Gateway system.So will we need to create RFCs in ECC and call them in Gateway system.
2. Will we need to install IW_BEP in backend system? Can someone explain its real purpose?
3. How do we do our data modelling? How do i define it if I don't have my SAP data structures in Gateway system.
Your guidance will really be appreciated.
Regards,
Saket.

Hi sanket,
Answering to your second question,
IW_BEP Component is used to handle the events and actions activated in the SAP system and to publish these events and actions through SAP NetWeaver Gateway.
The BEP functionality enables you to:
Obtain and publish Business Object Repository (BOR) events without writing code. For example events raised as a result of changes in a business object: because of changes in a sales inventory, an event is raised and published to SAP NetWeaver Gateway.
Obtain and send events for SAP Business Workflow, for example, an event is raised for a workflow user decision step.
Obtain and send events from your code, for example, events raised as a result of implemented customer code, such as BAdI implementations.
Read more about IW_BEP at:
Business Enablement Provisioning (IW_BEP)
https://help.sap.com/saphelp_gateway20sp08/helpdata/en/a2/15f0b42f2948f6bb9e51f98e8c39e9/content.htm
Development with IW_BEP in SAP Netweaver Gateway
https://help.sap.com/saphelp_gateway20sp05/helpdata/en/64/472d8e21a342ba9d83e403ff4cd9db/content.htm
Hub Odata Channel without IW_BEP
http://help.sap.com/saphelp_gateway20sp06/helpdata/en/32/5895449ac74783a3bd80a782c82f85/content.htm
Regards,
KK

How to activate Process Chain in Production System?

Dear all,
We transported the process chain from QA to Production. But in Production they are in hidden mode. Means If i select the process chain, it does not showing any thing. How to I can schedule, activate and how i can see it in change or display mode in production.
Please provide helpful solution ...
Thanks in advance

Hi Shashi,
This should not be a basis issue .
Any how you have to take care of prerequisites like If you use load distribution for your system environment, the server group (logon group) is reduced to one server before debugging commences or if any auth issue.
[Here is all about external debugging |http://help.sap.com/saphelp_erp60_sp/helpdata/en/af/0cb5403fd63426e10000000a1550b0/content.htm]
Regards,
Gagan Deep Kaushal

How to activate Open Hub in closed system

Hello friends
Do you know any ABAP Program, Function Module or any other way to activate Open Hub Destination in closed system (i.e. QA)?
Cheers,
A.

Hi,
I suggest to change the object changeability in the Data Warehousing Workbench.
T/code RSA1
Go to the Transport Connection perspective
Then click on push button Object Changeability
Here you can find object type DEST (Open Hub Destination). Please change the setting by right clicking, choose Switch Changeability.
Now you will be able to activate the Open Hub Destination w/o having to open the system.
Please refer also to SAP Note 337950 - Queries (including objects) cannot be edited.
Best regards,
Sander

How to activate Adobe service

Hi All
I am working on Adobe Services on sneak preview NW2004s SP9. While checking the webservice it found its not working. Webservice in Webservice navigator is getting falied. (RPC). Can help me in activating service?

Hello,
The AdobeDocumentService webservice is not there (in this case you can download appropriate version of ADS on SMP/swdc), or it's there but doesn't work (in which case the configuration guide on service.sap.com/adobe > Media Library > Documentation will provide all the answers you need)?
Regards,
Francois

How to activate netweaver in ECC 6.0 EHP6 system

Dear friends,
We are using EHP6 IDES server, in that i want to use net weaver , please let me confirm my points.
1) How to activate netweaver in ECC 6 with EHP6 server.
2)how to create link for that server access from browser .
3)How to activate webdynpro .
Please provide me step by step procedure for activating NetWeaver in EHP6 server

1 - You don't activate Netweaver in an ECC system. Netweaver is a technology platform and products are based on that.
2 - Configure Web GUI. Refer to this blog - http://scn.sap.com/docs/DOC-29485
3 - If your question is about activating Web Dynpro services then read this link
Activating Web Dynpro Services - Search - SAP Library
Regards
RB

How to Activate ping services in ECC system

Similar Messages

Maybe you are looking for