How to activate Process Chain in Production System?

Dear all,
We transported the process chain from QA to Production. But in Production they are in hidden mode. Means If i select the process chain, it does not showing any thing. How to I can schedule, activate and how i can see it in change or display mode in production.
Please provide helpful solution ...
Thanks in advance

Hi Shashi,
This should not be a basis issue .
Any how you have to take care of prerequisites like If you use load distribution for your system environment, the server group (logon group) is reduced to one server before debugging commences or if any auth issue.
[Here is all about external debugging |http://help.sap.com/saphelp_erp60_sp/helpdata/en/af/0cb5403fd63426e10000000a1550b0/content.htm]
Regards,
Gagan Deep Kaushal

Similar Messages

Error "Object 'DM' (APCO) of type 'Application' is not available in version 'A'" while transporting process chain to production system.

Hi Gurus,
Whenever I try to transport a process chain ZFI_0FIGL_C10 from dev. to qua. & prod. the error “Object 'DM' (APCO) of type 'Application' is not available in version 'A'” is displayed in the end of creating transport package.
The process chain was created to load data to 0figl_c10 and it works all right on all systems (dev. qua. prod.).
The process chain contains processes for:
- starting the process chain
- executing infopackage (for loading data to 0figl_o10),
- ACR (activate data in 0figl_o10)
- delete index 0figl_c10
- DTP loading data from 0figl_o14 to 0figl_c10
- executing infopackage 80FIGL_O10
- creating index in 0figl_c10
- building DB statistics
- rolling up aggregates in 0figl_c10
- deleting of requests from the changelog 0figl_o10
- deleting of requests from PSA (0fi_gl_10)
How to find what cause that error.
Regards,
Leszek

Hi,
A SAP consultant told me to ignore that error.
Indeed, after creating transport with some new process chains (again I was informed about that error "APCO ...") and transporting it to production everything works all right.
The problem is described in sap note: 883745.
Regards, Leszek

How can we change the description and name of Process Chain in Production

Guys,
Can anyone please help me to understand how can we change the name and description of the process chains in Production in SAP BI?
Regards

open the process chain and go to edit mode and then press Ctrl+F6 for a rename... you can only rename the description and not the technical name.
If you want to edit PC in production - esp one which has been transported - go to transport connection and change the object changeability for the same to everything changeable ( right click on the same to get this option )

How to activate process variant in prod

hi,
When i am activating a newly transported process chain in PRODUCTION,i got the error :
Process variant ATTRIBWAIT EVEN_44W1TMZUNLBVJO1F6MF9GFNT6 does not exist in version A.
How do i activate the process variant ?.Its a wait process between the infopackages and attribute change run.
Please help me its a bit of urgency.

hi,
I am not able to find that in sm62.
Let me give clear picture.I updated the master process chain by putting wait process in between the infopackage and attribute change run.This wait process worked well in test system,but its giving an error in the production system when i try to activate and schedule the chain.So i am not able to schedule the chain.
Please help me with this its a bit of urgency.

How to schedule Process chains in Bi Admin Cockpit

Hello friens,
I am working on installing Bi cockpit.
After installing the info providers, i have to schedule the process chains for Bi admin Cockpit.
I know the transaction is RSPC.
But I dont know how to schedule process chains for Bi admin cockpit.
How to schedule Init and Delta
If you can send me step by step documents.
Or any good sap note number.
Or any good links i will really apreciate it.
I want to schedule process chains
Content Master Data
Data Load Statistics # Delta
Data Load Statistics # Init
Query Runtime Statistics # Delta
Query Runtime Statistics # Init
System Master Data
Please advise

Hi,
Please check out this document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
Hope it helps.
Thanks
Mona

Trigger Process Chain from Source System into Target System

Hello...actually in source system BZD, we have a process chain, in the target system BWD, we have another process chain as well. We want to have a process of combining these two process chain together. When the process chain in source system is completed successfully, the system will sent out some sort of signal to start the process chain in BWD. I am not sure how this can be done, I try to use the function module "BP_EVENT_RAISE" in the BZD and when this module is called, it does not start the process chain in BWD after the process chain in BZD is completed. I just wondering am I using the correct method. If will be good if anyone here can help...thanks alot.

>
FluffyToffee wrote:
> Hello...actually in source system BZD, we have a process chain, in the target system BWD, we have another process chain as well. We want to have a process of combining these two process chain together. When the process chain in source system is completed successfully, the system will sent out some sort of signal to start the process chain in BWD. I am not sure how this can be done, I try to use the function module "BP_EVENT_RAISE" in the BZD and when this module is called, it does not start the process chain in BWD after the process chain in BZD is completed. I just wondering am I using the correct method. If will be good if anyone here can help...thanks alot.
Hi Fluffy,
Check RFC connection between the two sysems.
Try using remote process chain process type in the process chain. the fllowing link may help you.
http://help.sap.com/saphelp_nw70/helpdata/EN/86/6ff03b166c8d66e10000000a11402f/frameset.htm
Regards,
sunmit.

How to active the transformations in production system

HI
How to active the transformations in production system when Time stamp error occured in SAP BI.
In SAP BW we use RS_TRANSTRU_ACTIVATE_ALL for tranfer rules activation.Is there any chance Activation allowes in production system witout any ABAP programme running.

Hi Gkreddy,
There is a specific program for that: RSDG_TRFN_ACTIVATE. It will also re-activate the related DTPs.
Please check the following SAP Notes:
#1408161 - Program for transformation activation.
#1471117 - SP25:RSDG_TRFN_ACTIVATE skips if M version has OBJSTAT 'INA'.
BR

How to create Process chain for Aggregate for Master data

Hello friends,
I created Aggregates on Navigational Attributes.
Now they are working fine, but i need to know that how shall i create the Roll up for Aggregates on Navigational Attributes.
The point is the master data changes frequently a lot of time for e.g. for 0customer etc.....
So if any one can send me the step by step documents so as to know how to roll up the Aggregates for Navigation attributes or for aggregates created on Master data....
How to create process chains for the same ?????????
Because if master data changes, then rolling up the aggregates straight forward will not help.
So we need to write a process chain so that it deactivates the aggregate and reactivate again and fill up again..........
If i mis interpreted something please rectify it.......
Please advise

Hello,
the changerun that you have to schedule in order to activate the master data will adjust the aggregates automatically. There is no need to deactivate them after master data loads.
Best regards,
Ralf

Creating process chains in production environment..

Hi,
We are planning to create process chains in our project , can we directly create process chains in the production environment? the data and the set up is very very small here so the number of chains and processess are very less , is it ok if we create the process chains in Production environemnt directly, or we need to create in development and transport it to production (note: there is no quality instance for BW in our project).
Solicit your help!!
Regards
Srinivas

Hi ,
Best practice would be to create PC in DEV and move it to PRD .
Actually what happens in real time is sometimes your data mismatch happens or some other data loading activity you are doing in PRD system . So you need the freedom of creating DTP or Infopackage directly in PRD system . otherwise it would be a time consuming process to make it from DEV to PRD .
Similarly when you are Infopackages & DTPs in PRD environment, there is a chance that your process chain might also be changed . So yes we can create it in PRD system .
Kind Regards,
Ashutosh Singh

How to Trigger process chains??

hi all
How to Trigger process chains??
Can anybody step by steps??
thanks
Senthil

The background control options are available to directly schedule the start process. You can start the start process immediately , that is when activating the process chain, for a specified time, or after a particular event. When you activate the process chain, the start process is scheduled in the background as defined in your selections.
You can also trigger the start of a process chain via a meta chain. A meta chain is when a process chain, to which you set this start condition, is fixed to another process chain. The process chain is started directly by this meta chain.
When you start the start process via a meta chain, it is not scheduled after you activated the related process chain. The process is only started when the meta chain, to which it is linked, is running.
The remaining chain processes, that is the application processes and the collection processes, are scheduled to wait for an event.
The start process has the following special features:
Only the start process can be scheduled without a predecessor process.
The start process can not be a successor to another process.
Only one start process is allowed for each process chain.
One start process can only be used in an individual process chain

Transport process chain to production

Hi,
i changed process chain in dev system and transported to QA. What i did is created a request then goto se09, select the request and click on release. Now i went to QA system then goto STMS tcode. double click on Quality system and then selected the request and click on import. Now the request is imported to quality. Everything is fine.
Now i want to put the same in Production system. So what is the process?
Is the below process is correct?
Goto Production system>goto STMS>double click on Production system-->select the request and click on import.
OR
Goto Quality system>goto STMS>double click on Production system-->select the request and click on import.

Hi prasad,
The procedure is same as you have adopted in quality.
but the option raised by u seems to be same.
Goto Production system>goto STMS>double click on Production system-->select the request and click on import.
OR
Goto Quality system>goto STMS>double click on Production system-->select the request and click on import.
regards,
mahendra

Transporting Process Chains from Production DOWN to QA and Dev

Hello,
We have a ton of Process Chains in Production. I am looking for the easiest and most efficient way to duplicate those in QA and DEV.
What steps do I take to Transport them DOWN to the other two environments? Are there any pros or cons to doing this, or is it easier in the long run to just re-create them in those environments? Like I said, we have a ton! Any help would be greatly appreciated.
Thanks in advance.

Hi
The best practice is to have every development done in Dev then transport to QA and then to P.
If you are not following this process for PC you should.
Also, every now and then QA should be refreshed (meaning, copy P to a new QA system and by doing so all the data and config (including PC) will be in the QA system).
I would recomend to recreate the PC in DEV and transport them thru the landscape. This way you have the correct process where every Development is starting on the DEV sys and moves to QA->P.
Edan

How to find process chain using background job in sm37

How to find process chain using background job in sm37

Better is to select the job.
Select (Define) Step (s) or F6.
Select the line and Menu Goto>Variant.
The variant contains the name of the CHAIN and its VARIANT.
Success
We faced an old job and via job monitoring we were informed about a cancelled job every 'interval'.
We noticed that the related chain was deleted but still the job was scheduled each interval again and was cancelled because an event was missing
We could not find the scheduled job via SM37.
Via view V_OP, view over tbtco abd tbtcp, we find the related entry.
We delete these entries via function BP_JOB_DELETE....
Edited by: Jack Otten on Jul 9, 2010 2:50 PM

How to stop process chain, if it is taking too much time than expected.

Some times if a process chain takes to much time to finish than expected, how I can stop the process chain and execute it again.
Thanks in Advance.
Harman

how I can stop the process chain ??
If the job is running for a long time ,
1)GOTO RSMO and SM37 and check the long running job over there.
2)There you can see the status of the job.
3)If the job is still running you can kill that job
4)delete the failed request from data target.
for more details go to this below link
how to stop process chain if it yellow for long time
how I can execute it again ?
GOto Function module RSPC_API_CHAIN_START
and give u r process chain name there.and execute.

How to change process chain in SAP APO, in RSCP tcode.

HI SAP APO Experts
I am from SAP ABAP background, I need to change a 'AND' operator in process chain in RSCP tranaaction in SAP APO.
I dont have any idea how to change process chain.
Could you please help me how to change process chain in SAP APO in RSCP tcode.
Appreciate your help or comments.
Sandeep..

Hi Sandeep,
The t-code RSCP does not exist in SAP APO. The correct t-code is RSPC.
Step 1:- In RSPC t-code, select the process chain which you need to change.
Step 2:- Double click on it.
Step 3:- It will display the various programmes attached to the process chain. Go to change mode by clicking on the change indicator (Control + F9)
Step 4:- Select the programme area where you need to do the correction or change. Double click on it.
Step 5:- It will take you to the programme and its selection contents. Make the relevant changes. You can directly carry out the change in se38 also if there is variant kind of changes for that particular programme.
Step 6:- Once the changes are done, save the changes and press F3 button which will take you to the home page of the process chain
Step 7:- Save again so that the change in the programme alongwith the process chain will get saved.
Regards
R. Senthil Mareeswaran.

How to activate Process Chain in Production System?

Similar Messages

Maybe you are looking for