How to activate Show Set Operations in Ad Hoc query

When I go into ad hoc query using an infoset I created the Extras > Show Set Operations and Switch off object selection functions are greyed out and I cannot select them. On another infoset these functions are available for selection.
Is there some setting in the info set creation that allows these function to be available for selection?

closing question

Similar Messages

How to activate or set up iphone5s

how to activate iphone5s or set up without apple id?

You can check if the iPhone has been Activation Locked here:
https://www.icloud.com/activationlock/
If you are the original owner (not 2cd hand or used purchase) and have proof
of the original purchase. take the iPhone and that proof to a physical Apple
store and they may be able to assist. Make an appointment at the Genius Bar
to avoid delay.
http://www.apple.com/retail/geniusbar/
If you are not the original purchaser and the iPhone is Activation Locked, you will
have to find the person who initiated the Activation Lock to have them release it.
If you cannot find them or they refuse, return the iPhone for a refund. There is no
workaround for Activation Lock.

How to activate off setting a/c in cash journal

Dear all,
I want to see offsetting account in cash journal report by selecting o/acct text from hidden layouts it has not displyaed result plz tell me anybody how to activate.

FaceTime is not supported by the respective Governments in the Middle East and all iPhones sold there have FaceTime removed or restrictions placed upon the iPhone. As for jailbreaking, it is prohibited under the Terms of Use to discuss jailbreaking or offer support to anyone who has jailbroken their iphone. You agreed to these terms when you joined this forum. Jailbreaking your iPhone will void any warranty, leave your iPhone vulvenerable to malware and deny you support from this forum.

How to activate a set of BEx queries.

Hello everybody!
Is there any functionality to activate a set of BEx queries, e.g. something for queries like RSDG_IOBJ_ACTIVATE for info-objects?

Hello Dmitry,
I don't think there's any need to "activate" BEx queries, unless you mean to activate them from the Business Content (in that case, I think you can only go through the Transport Connection tab in RSA1).
Hope it helps,

How to activate Function Set

Hi Guys,
I want to activate Function set SAP Retail (EA-Retail) in my SAP IDES 2005 SR2 (700) box.
Is it done through EWF5.
Can someone give me correct procedure.
Thanks in advance!

You can do it in Client 000 with user having sap_all . Pleas logoff all other users .
Thanks
Prince Jose

How to activate the "Set Exchange Rate" field in billing document header?

Dear All,
I would like to get the exchange rate at the time of the billing without changing the sales order exchange value.
The set exchange rate field is grayed off.
Thanks in adavance.
Regards,
Niketan

Hi,
This can be achieved using the copy control setting for billing at the Item level. The field is: PricingExchRate type
and the possible values relevant for you are:
C Exchange rate determination according to billing date
E Exchange rate determination according to current date
Hope this helps!
Thanks
Siva

[TEM/Ad hoc Query] Showing Invalid Relationships in Ad Hoc Query

Hi Experts,
In our system, during internal transfers Persons, a new Personnel number is created for him/her. The old Personnel Number was delimited (Termination Action) and is stored in an Infotype as an Inactive Personnel number of that person.
We are planning to copy an Inactive Personnel number's past A025 Relationships (Business Event is attended by) to its Active Personnel Number. So that the Active Personnel will keep the record of the Complete History of trainings taken by the employee.
The problem is that in Ad Hoc Query. The copied A025 Relationships of the Active Personnel Number is not shown since it is not a valid relationship. (The validity period of the A025 relationships that was copied from the Inactive PERNR, is outside the validity period of the Active Personnel Number.)
Is there a way to make Ad Hoc Query recognize these invalid relationshps?
Points to those who can help.
Thanks.
Regards,
Olekan Babatonde

Logically the system will not accept an attendee to attend an event before his hiring date.
You have to try some other way

Set operations in AdHoc Query - user settings

Hi
I am checking out the Set operations in AdHoc Query. The documentation says you should save the setting "Set operations shown" as a user setting. Could anyone advise me where this is set? I can't find a parameter for it, and can't find it in the regular settings.
Any help appreciated.
Kirsten

The save is automatic upon exiting Ad Hoc query. Once you do "Show Set Operations", work on a query, save and exit, the next time you open Ad Hoc query, Set Operations tab is displayed by default.
Regards,
RN.

How to perform Set operations in ODI?

Can anybody suggest me how to perform a set operations in ODI?

Hi ,
May be the below threads helpful for u....
UNION operation in ODI
How to use Union, Union all, MINIUS in ODI
Thanks.

Set operations & tables with different columns

I have a problem. I have 3 tables - Countries, Locations & Departments. I want to output the country_id and country_name from the countries tables for countries that have no departments. Locations has country_id and location_id columns and departments has location_id and department_id columns. All is in Database 11g. I can produce a table which gives me the locations with departments or without departments as follows:
select location_id from locations intersect select location_id from departments;
This gives me a list of locations with departments. Conversely I can get a list of locations without departments as follows:
select location_id from locations minus select location_id from departments;
However, to combine this output with the countries table I need to produce country_id in the output. However, when I try to add country_id to my code from above as follows:
select country_id, location_id from locations intersect select to_char(null), location_id from departments;
I get no rows found. I understand why. There is no intersection between country_id in locations and the null output from departments (where there is no country_id column). Alternatively, if I try as follow:
select country_id, location_id from locations minus select to_char(null), location_id from departments;
I get rows with every country_id whether they have departments or not. Again, I understand why. I am essentially subtracting nothing (the to_char(null) from departments) from the country_id column in locations and getting the entire country_id column as output.
How can I use set operations to produce the country_id column? I also do not want to show the location_id problem.
This problem is repeated when I try for the final country_id, country_name final output. The countries table has these columns. However, the locations table does not have the country_name column. It only has the country_id column. So a query such as this one:
select country_id, country_name from countries intersect country_id, to_char(null) from locations;
presents me with the same problem as above. The country_id column intersects nicely, but the country_name file does not intersect as it does not exist in the locations table. Again, how can I use set operations to produce the country_id and country_name columns.

Hi,
the method I outlined for you above should be fine. It doesn't matter that there are one-to-many relationships which may cause repeated output rows; set operations (except for UNION ALL ) always return distinct rows.
Can you do a query on the countries table, that shows all countries?
Can you do a query involving all 3 tables inner-joined, that shows the countries that are related to locations and departments? (Repeated rows are okay.)
Then you can do a MINUS, to get only the countries that are not related to departments.
If you get stuck, post a little sample data (CREATE TABLE and INSERT statements), the results you want from tha data, your best attemptat a query, and a description of the problem (including the full error message, if any).

LabVIEW and Set Operations

Hello all,
I am a student at the University of Texas @ Austin and I have been
looking through the LV 5.0 documentation for any documentation about
Sets and/or Operations on Sets but cannot find anything usefull. Does
anyone know if LV supports Sets and operations on Sets, for example,
Union, Intersection, or just a way to specify the elements of a Set? I
have an assignment to create a Non-Deterministic Finite State Machine
Simulator and would like to implement it using LV? I have some ideas on
how to Fake the set operations but it would be much easier to not have
to re-invent the wheel. I will check the newsgroup, but please also
respond to [email protected]
Thanx in advance Jeffo ....

"Jeffrey R. Orbach" wrote:
> Does anyone know if LV supports Sets and operations on Sets, for example,
>
> Union, Intersection, or just a way to specify the elements of a Set?
There are probably a number of ways to implement this in LabVIEW, depending
upon what kind of data you want in your sets, what kind of operations you
want to perform on them, etc. It's a pretty open-ended question without
more detailed knowledge of what you're after.
From my point of view, the LabVIEW array structure and its operators are a
construct that provides some set-like functionality right away:
specify set elements => array control on panel
check for membership => Search 1D Array
set union => Build Array (followed by Sort 1D Array if you want to keep the
set sorted)
set intersection
=> loop through one array using Search 1D Array on the
other to generate output set
This is one simple approach that shouldn't require a whole lot of coding or
wheel reinvention...
Regards,
John Lum
National Instruments

LV 5.0 and Set Operations

Hello all,
I am a student at the University of Texas @ Austin and I have been
looking through the LV 5.0 documentation for any documentation about
Sets and/or Operations on Sets but cannot find anything usefull. Does
anyone know if LV supports Sets and operations on Sets, for example,
Union, Intersection, or just a way to specify the elements of a Set? I
have an assignment to create a Non-Deterministic Finite State Machine
Simulator and would like to implement it using LV? I have some ideas on
how to Fake the set operations but it would be much easier to not have
to re-invent the wheel. I will check the newsgroup, but please also
respond to [email protected]
Thanx in advance Jeffo ....

Tom Impelluso wrote:
>
> Hello
>
> Due to interncine battles between various system admin. people,
> I have a problem.
>
> I have written a vi in lv 5.01, but must run it on a PC running
> lv 5.0
>
> It uses facilities common to both so it should open on the PC with
> 5.0, yet there is an error message
> when I pull up the 5.01 vi with 5.0
>
> Is there a way I can go back to the 5.01 and save it as a version
> 5.0 file?
>
> (yes, much easier to: load 5.01 on the PC, but that would involve,
> warlocks, spells, and the power of conflicting system admin. people;
> short of a kludge, I may have to re-write teh VI)
>
> Tom
Nevermind!
Figured it out.
Sorry to post pre-maturely
Tom

PQAH Set operations

Hi,
In the tcode:PQAH, Extras,Show set operations is disabled. Can any body help me on what role/authorization object need to be activated for this option?
Regards,
Anil.

hi
1.Pqah
2.then /nsu53 or /osu53
2.5.Text view and from there u can send mail to basis saplogon id or take screen shot and send to basis team
3.it will show the missing authoraisation
4.fwd it to your basis team
with regards
partha

How to activate ichat - the invite icon will not show

how to activate "invite" in ichat - it won't allow me to click on it.

Hi,
How are you trying to Invite ?
Text Chats
Double click any Buddy in the list should open a chat window for Text chat.
You can now start typing.
Alternatively you can highlight a Buddy and then use the icons at the Bottom of the Buddy List.
The "A" is Text chat.
Another alternative is to go to the File Menu and > New Chat
You then get a Pop up to offer any of the accounts you have set up and a place for the Buddy's name.
You can also Right/Control click a Buddy or Highlight a Buddy and go to the Buddies menu.
Audio Only Chats
Fo this the Show Audio Status option in the view Menu needs to be ticked and the Microphone Enabled item in the Video menu (Will read Audio if no Camera)
Then most of the options above will work.
The Buddy List direct approach is to click their Audio Icon rather than the whole Line.
VIdeo Chats
As above with Show Video Status nd Camera Enabled ticked in the two menus
Group chats/Chatrooms
Go to the File Menu > Go to Chat
Enter room name to either create a new room or enter an existing one.
Go to the VIew Menu > Show Participants.
Drag Buddies to the slide out Drawer.
Send text to Invite them
Do you need more info ?
9:48 PM Sunday; August 21, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

SAP hana Visualize Plan show Create Temp Index and it shows Unsupported Operator Order. Why the hana build temp index and how to get rid of it ?

When I see the Visualize Plan for SQLScript it show Create Temp Index at many Places.
It also shows unsupported operator order CS_JOIN over CS_AGGREGATION.
Why does hana create Temp Index and how to get rid of it.

Just browsing for some more information on this operation, and it just happened that my favorite VizPlan expert has chimed in here
I have a scenario where I am using a nested SQLScript based calc view. One view (child view) retrieves a relatively small data set, then the main CV takes that and joins with a bunch of other data from another schema.
When I started out, just the nested portion of (child calc view), takes roughly 800ms to return it's resultset, for which I was pleased. Now, when I added some other joins onto that dataset in the main CV, I am seeing my runtime spike to approximately 16 seconds, with 15 seconds being spent on a "Create Temp Index" process that only results in 12 rows (from what I can see).
Now the question becomes - since I have identified where 95+% of my runtime is being generated, how can I really pinpoint what operation is causing this? I was thinking the ID column (shown in the details) may offer some clues if one knew how to locate the details in a system table somewhere?
Otherwise, all I can see in the VizPlan is that YES there is a long running component, but I have no idea what it might be, therefore can't do anything about it
Regards,
Justin

How to activate Show Set Operations in Ad Hoc query

Similar Messages

Maybe you are looking for