How to activate Standard BI Reports in CRM 7.0

Hi,
I am new to CRM. We are done with C41 of Best Practice, so i am able to activate all the standard CRM Interactive reports listed on UI.
My Source system client and Reporting client are different on CRM System.
CRM System is integrated with ERP system but not with BW system.
Now my task is to activate the standard BI reports on UI.
1. What is the difference between CRM Interactive reports and BI reports which are listed on the UI.
2. Do we need to connect to the BW server for activating these reports.
Kindly forward any documentation or link related to this topic.
Thanks,
Jaya.

Hi Jaya
Yes you will need to connect to BW to run the BI reports within CRM.
The difference between the reports available are as such.
Interactive Reports: Basic Reports without too much processing required.
BW Reports: More complex with heavier level of processing.
This is a general summary of the differences.
Regards
Arden

Similar Messages

How can change standard BW- reports

Hi ,
i nee small chnges to BW standard reports ..
plz tell me , how can change standard BW- reports...
i assign points ..
regards
PSR

PSR,
You can make changes to them directly. But it is a best practice not to disturb them, but save as a new report and then make necessary changes. So you can save as them and make necessary changes.

How to copy standard SAP report to a Z report?

Hi All,
Guys, I have a requirement to copy an standard SAP report and make some changes to it. Please let me know how to copy a standard SAP report as a Z report. Is there any simple way or will I have to open the source code and copy it into the new Z program? If that is the case, how will I copy the screens and related PBO/PAI events?
Please provide me a step-by-step solution.
Thanks & Regards,
Madhur

Hello Madhur,
As Raja had said, yuo could just copy the program from SE38. But just remember a few points:
1. If the standard report is being used in some other programs, then there's no way you can make your Z-report get used in all such instances. I suspect that you may not want to do that anyways, but just in case.
2. Just also check out if the standard report you're talking about has any INCLUDE programs within it. If there are too many standard INCLUDEs in the main report, then you might have to decide whether you need to copy all of them too, or let them be as they are.
3. You are likely to have some problems with the text-elements and translation that may have been maintained for the original report.
I have experienced some problems with respect to the second and third points in the past, so it is worth it to be a bit careful.
Regards,
Anand Mandalika.
Regards,
Anand Mandalika.

How to modify Standard ALV Report

Hello All,
I have a standard report which displays the data in ALV Grid. This data can also be exported to Excel sheet. I have got an FBI assignment where I have to add some new fields besides the existing ones. Could you please provide me with some documents oe explain me in brief how to modify any standard ALV report.
Thanks in Advance.
Saras

Can't you just add the fields with the layout option in the tcode ?? with other words are all the fields selected in that particular layout the programm comes up with
if the fields can't be selected a quick sollution can be to make a query with SQ01
Message was edited by:
A. de Smidt

How to filter standard ALV report with custom UI element?

Hello Expert,
I got a requirement to filter standard ALV report based on the custom UI element (which is created in the screen before displaying the ALV report). Upon entering the values in the Custom field, the ALV report is displayed accordingly.
Any ideas how to approach it?
Thanks,
Mohammed

Hi,
Okay, let me explain the steps in detail
Let us say you have alv table with 10 records and alv table is shown first time with all 10 records
Create an internal table in component controller's attribute GT_ORIGINAL_DATA and save all 10 records into this table first time
Now, user enters value in FILTER_MATNR field 123 and press apply_filter button or press enter key
Read the value of field filter_matnr and get the only matching records from global internal table GT_ORIGINAL_DATA into local internal table as below
          data lv_matnr type matnr.
          data lt_data   like wd_comp_controller->gt_original_data.
               " read the value from context attribute of filter_matnr
                    lv_matnr = ???
               " copy all data into local table
                    lt_data[] = wd_comp_controller->gt_original_data.
               "delete the records which does not match
                 delete lt_data where matnr NP lv_matnr.
Now, bind the data lt_data to context node of alv table
Hope this helps you.
Regards,
Rama

How to activate hierarchy in report?

Hi experts,
I want to create a report which will have Sales Office.. and my requirement is Sales Office Hierarchy shoud be active.. What are the steps to activate hierarchy in the report?
Thank you,
Swati.

1. why it is necessary to activate the sales hierarchy.. i mean what is its use??
> hierarchy helps to view the data at various level. Say you have hierarchy for Plant. Then you can see data at each plant level or total at region level or at country level. Same can be with time - date or week or month or year.
2. Sort withing the hierarchy according to - sorting by Key or by text - name of plant or plant code.
3. Expand to level - at what level hier should be diplayed. if there are more levels, then at what level inital report output is required.
4. Position of Lower level nodes - nodes below / above its previous level.
5. Values of Posted nodes & Nodes with only lower level nodes - used to display or hide the data at each node level
regards: gaurave

How to add standard field in the CRM Pricing field catalog?

Hello All
I am working on CRM 7.0 , I have a problem with the CRM pricing field catalog that when I am trying to add new field in the catalog the system gives me an error message that the entries should be in the allowed namespace (Y Or Z) but the field I am trying to add in the field catalog is standard field. What should I do to add this field in the field catalog?
The field is : BATCH_ID with data element CRMT_BATCH_ID
Thanks in advance
Jacopo Francoise

Follow note : 441083

Standard SD Reports under sales information syatem

Hi,
How to configure Standard SD Reports which fall under sales information system.Kindly tell me the
process of configuring these reports in detail in SPRO
Regards
Rahul

If it is LIS there are two important things:
1) Statistics update configuration should be done at Header level OVRO and item level OVRP for the sales area.
2) Customer statistics group and material statistics group should be filled in customer and material master respectively.
Regards,
GSL.

How to Sales Reports in CRM system

Dear all,
we have CRM and ECC system which are up and running.
and also we have BW server connected to both systems. We want to see some reports like quotations report, sales orders report, deliveries report,etc... which are exclusively available in ECC system.
Could any one of you explain me how to activate BW Infocubes and how to see Sd reports in CRM system with the help of BW system.
Your suggestions will be highly appreciated.
Thank you
Raghu Ram

Refer pre-configured scenarios and step by step guide here:
http://help.sap.com/bp_biv170/html/BW/I15_EN_DE.htm
For further more scenarios refer:
http://help.sap.com/saphelp_nw70/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm

How to write the folder path in standard webi report - Most Accessed Documents

How to write the folder path in standard webi report - Most Accessed Documents
All
   -> Public Folders
                  -> Auditor
                  -> ABCD
I want to give path of folder 'ABCD' and all the reports/ subfolders under it?
Prompt - 'Enter the Folder Path(Add % at the end to include Sub Folders)' ?
Give me exact path syntax

Hi Daniel,
But when I give my URL as
http://serverA:80/irj/portal??NavigationTarget=ROLES://portal_content/crm-practice/14-Feb/Test_Page
I am able to access the iview but the thing is I am getting TLN,Toolarea,Masthead,etc.
I will tell my requirement,
ServerA (EP 7.0) has some iviews,pages...
I need to access these iviews from serverB(EP 6.0)....
In ServerB only the iviews has to be displayed in the content area but not TLN,Toolarea,etc.
Kindly help me in this regard.
Thanks and regards,
Purushothaman.
Message was edited by: Purushothaman Vyasarao

How to activate delivery reports on iphone 5s (IOS 8)

Where can find how to activate delivery reports on iphone 5s?

This in not accurate.
The time stamp shows the time the message was sent when the bubble it pulled left, not confirmation of delivery.
The request is for a "Delivery Receipt" which is a separate message from the recipients phone back to the source phone and indicates successful delivery at the recipients end. This feature is not available on the iPhone 5s. The feature is NOT part of iMessage. It's part of the cell providers text messages systems.
For the record, the October 2014 iPhone 5s manual does not speak about this in any way. The word "Delivery" appears one time in that manual and has to do with email, not texting. The industry standard term for this is "Delivery Receipt". This is not a "Read Receipt".
I tested the *0# thing I've read about. Doesn't work on Verizon iPhone 5s.
Thanks

How to activate a CRM datasource and also to enhance

Hi experts
1. can somebody guide me how to activate a CRM datasource like in R/3 we do it in RSA5 and check it in RSA6
do we have to do the same and also any additional steps need to be performed for adapters.
2. How do we enhance the CRM datasources.
can somebody guide me with steps for the both.
thanks and regards
Message was edited by:
 Neel Kamal

Hi ,
BWA1 is for maintaince of Datasource in which scenario do we use this Tcode isit only when we do the Generic datasource.
BWA1 is for all standard crm datsource maintaince
rsa2 for generic datasource
BWA5 i think we use this Tcode after RSA5 activation additionally.
yes(incase of delta)
BWA7 do we have to use this tcode along with BWA1 for standard datasources also or else only for generic datasource.
irrespective of the type of dtasource,use it if you want to load delta(you need to delta enable the datasource here)
So we don't need to put the code as we traditionally do it for R/3 , if we just mapp the fields that would bring the data for these fields.
as i told in CRM we willwrite code in BADI in case you have done enhancement
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/a-c/customer%20enhancements%20and%20userexits%20in%20bw%20-%20sap%20netweaver%20%20know-how%20network%20webinar.pdf
also chk this(credit goes to the writer)
CRm enhancement:
1. Enhance Extract Structure with the required fields. (Create & include an append structure to the extract structure via transaction RSA6).
2.a) Release the fields of the append for usage. ( To do this, double click on the Datasource and remove the flags in the column 'Hide Field' for all fields of Append).
2.b) If the new fields cannot be seen in the extract structure of the transaction BWA1 then change and save the datasource, and then activate it in RSA6.
3. Define your mappings in BADI (CRM_BWA_MFLOW) to fill these fields.
Goto SPRO . Follow the path ->SAP Implementation guide ->Implementation with other mySAP components ->Data transfer to the Business Information Warehouse-> Settings for the application specific datasources (CRM)->Settings for BW adapter-> Badi :BW adapter :Enhancement of datasources in messaging flow.
4. Replicate the new Datasource to BW.
5. Expand the Communication Structure in BW.
6. Maintain transfer Rules for the new Datasource.
7. Activate the trasfer rules and perform the upload.
Refer to the SAP Note 692195 for more info (Question 4 to be specific).
Cheers,
Swapna.G
Message was edited by:
 swapna gollakota
Message was edited by:
 swapna gollakota

How do find standard report for

Please help me my client asked me to look for standard report but am lost am new cleint's easy access dont not have these so how do i find these reports
AR Deposit Report
Costs charged to Warranty orders
Costs Of Goods Sold Report (by Market Business)
Units shipped not Delivered
Units shipped not Invoiced

The kind of report in my mind.
- What is my last month or last year activity ?
- What was past tennis schedules ?
Did I go to tennis regularly ?
etc
You could use a text editor and manipulate a copy of the > ics file, or you could use Apple script to extract and
process the historical events.
The ics files looks too complicated.
I don't know, Apple script.
Looking for, if there any report option in the iCal.

How to create a custom report and include multiple extended CRM database?

I have created a number of CRM databas extensions and applied all there fields to my contacts and cases.
I might have for example:
- Additional address details
- Business information
- Quote Details
- Trade Referees
I know how to run a custom report and that I can select any one of these extra CRM databases as a filter and included them in the report. Is there a way though to add more than one (preferrably all) of the extra CRM databases to the report?
The onely ways I can see it work is by either include all fields in one extra CRM database (not ideal) or bu running multiple reports and merge them somehow in Excel.
Is there another way that I am not aware off?
Thanks for your help,
Jerun

Hi Jerun,
There's no way to do that. You'll need to run separate reports and merge them in Excel.
-m

How can I activate drill down report for planned line items please urgent?

Hi Everyone,
Please suggest me how can i activate drill down report for planned line items in internal orders. S_ALR_87012993. Please suggest me, I'll award full points. I am unable to do it in client system, which has already line items. I tried in my sys with new config it is working.
Kind regards
Arvey.

Hi
It is based on the reports attached in the Report Group - TCODE: GR53
In the Report Group screen
Press CONFIGURE This is to attach any Drill Down reports.
Press the Insert Line icon
As is the screen may be used to insert a Report Writer report group. To add an ABAP, press other report type
Double click on ABAP Reports
Enter the name of the ABAP and ENTER
RCOPCA08 Profit Center: Plan Line Items
VVR

How to activate Standard BI Reports in CRM 7.0

Similar Messages

Maybe you are looking for