How to activate the database
after create the database using the database configuration asistant, what the next step that we should done to activate the database. i just know that we should create the listener. other than this what should we done..pls kindly help me.im just a new hire who working as a database administrator
user12103692 wrote:
after create the database using the database configuration asistant, what the next step that we should done to activate the database. i just know that we should create the listener. other than this what should we done..pls kindly help me.im just a new hire who working as a database administratorThen the best advice for you would be to visit http://tahiti.oracle.com/ and find answers there.
Question you asked is very common and demands very common answer ,so don't get used to ask this kind of questions in forums as the best place to find the answer , when in a situation like you is , is reading the books, papers and posts on the net where discussion about this already hapened.
Similar Messages
-
How to activate the ATP buckets in APO?
Hi,
We are in the process of changing the ATP buckets in our APO system.
I know the Path in the configuration:
Advanced Planning and Optimization -> Global Available-to-Promise (Global ATP) -> General Settings -> Maintain Global Settings for Availability Check
On the left side you will get three sections:
Global Settings
ATP Buckets (Active)
ATP Buckets (Planned)
I can change the values in (example field Shift Receipt Bucket) the ATP Buckets (Planned) section and save it with a transport. Now the question is how to activate the buckets. Is there another transaction for this? SAP Help doesn't specify how to activate.
Any ideas are highly appreciated.
Thanks,
MaheshHi,
To activate the buckets one need to check the box 'Current' in the options under ATP Buckets (Active). Also, as referred earlier by Dipthi do look up the documentation under:
SAP Advanced Planning and Optimization (SAP APO) -> Global Available-to-Promise (Global ATP) -> Settings for Global ATP -> General Settings for Global ATP ->Definition of Buckets for ATP Time Series ->Activation of Bucket Parameters for ATP Time Series.
The details are as beneath:
Use
If you change bucket parameters (see Definition of Buckets for ATP Time Series), these must be activated subsequently for the ATP time series.
Features
The system activates the bucket parameters in the following situations:
Since activation in each of the situations described below leads to downtime, you should change bucket parameters less frequently than other Customizing settings.
· Creating the active planning version for a client using transaction /SAPAPO/MVM
If you set up a system again, you should process the bucket parameters before you create the active planning version. The bucket parameters are thus activated automatically.
· Initializing SAP liveCache for all clients using transaction LC10
In the case of an upgrade, you should process the bucket parameters before activating SAP liveCache. The bucket parameters are then activated automatically.
· Executing the report /SAPAPO/OM_ATP_REBUILD_TS
The system only rebuilds the ATP time series here.
In this case, the SAP liveCache administrator must execute the following steps:
a. Shut down SAP liveCache.
b. Replace the com-file registration:
i. At command line level, go to the SAP subdirectory of the SAP liveCache installation.
ii. Under Microsoft Windows, save the original registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst), for example, by renaming or copying to another directory.
iii. Under Microsoft Windows, rename the registration file SAPAPO_REBUILD.lst as SAPAPO.lst (UNIX: libSAPAPO_REBUILD.lstas libSAPAPO.lst) or copy it to another directory.
iv. Under Microsoft Windows, rename the registration file SAPATP_REBUILD.lst as SAPATP.lst (UNIX: libSAPATP_REBUILD.lstas libSAPATP.lst) or copy it to another directory.
c. Launch SAP liveCache.
d. Execute the report /SAPAPO/OM_ATP_REBUILD_TS.
e. Shut down SAP liveCache.
f. Replace the com-file registration by replacing the registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst) with the original versions under Microsoft Windows.
g. Launch SAP liveCache.
Regards
Vinod -
How to activate the IS-Retail in ECC 6.0 R/3 system
Dear Guru's...........
Can any one tell me how to activate the IS-Retail in ECC 6.0 R/3 system.
I have IDES system in my home I donu2019t know how to activate retail settings.
Please suggest me how to do that.
Regards
dnrDear DNR,
SPRO --> IMG --> Activate SAP ECC Extensions (Or, T. Code: SFW5)
Go to Tab: Industry Business Function
Select Business Function Set: ISR_RETAIL - SAP Retail
A new line will be appeared below.
Current Status will be OFF. Click within Field: Current Status. It will pop-up a list. Select "X - ON".
Important: I've read somewhere - Once Activated, cannot Roll-back.
Best Regards,
Amit
Note: For more, go to - http://help.sap.com
Follow the menu tree: SAP for Industries/SAP for Retail
Click on the link for "SAP industry Specific Components"
Choose the document "Business Function Set Retail"
Also,
Check https://websmp103.sap-ag.de/erp-upgrade --> mySAP ERP 2005: Updated upgrade FAQs, there you will find the list of Industry solutions which are supported by mySAP ERP.
https://websmp103.sap-ag.de/~sapidb/011000358700006168472006/
You must this thread in to [Forum: SAP Enhancement Packages|/community [original link is broken]; OR [Forum: Enterprise Resource Planning (ERP)|Enterprise Resource Planning (SAP ERP); as Nowhere, it is related to SAP SD. -
How to activate the Check box in Purchase Order after Goods Receipt
Hi All,
How to activate the check box after Goods receipt of Purchase order in Item view (Goods Receipt is completed).
Where t make the settings in SPRO.
Regards,
Shailendra HadkarHi
SPRO - SAP IMG- Material management - Inventory management and physical inventory - Goods receipt - create purchase order automatically - activate auto Po creation for movement type.
Then activate the auto PO creation in Vendor master - Purchasing view
Check it out.
Regards,
raman -
How to recover the database when some of the archive log file get deleted.
I am facing a problem with Oracle database, which is related to archivelogs.
Our development database is running in archivelog mode, but we don't have backups scheduled and have no recovery catalog.
When the database was in running condition, disk got full, so some archivelogs were deleted manually.
After this they restarted the DB, and now DB is not coming up. Errors are as follows:
SQL> startup
ORACLE instance started.
Total System Global Area 1444383504 bytes
Fixed Size 731920 bytes
Variable Size 486539264 bytes
Database Buffers 956301312 bytes
Redo Buffers 811008 bytes
Database mounted.
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: '/export/home/oracle/dev/ADVFRW/ADVFRW.system'
SQL> recover datafile '/export/home/oracle/dev/ADVFRW/ADVFRW.system'
ORA-00283: recovery session canceled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
SQL> recover database using backup controlfile;
ORA-00279: change 215548705 generated at 09/02/2008 17:06:10 needed for thread
1
ORA-00289: suggestion :
/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC
ORA-00280: change 215548705 for thread 1 is in sequence #1107
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC
ORA-00308: cannot open archived log
'/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
CANCEL
Media recovery cancelled.
SQL>
1. How to recover the database and bring it online
Any help will be highly appreciated.
With Regards
Hemant Joshi
Edited by: hem_Kec on Sep 7, 2008 9:07 AMHi,
Archive log files are the copies of redolog files.As redo log files are circularly overwritten,oracle generates archive log file of the corresponding redo logfiles being overwritten.So if you have a backup that dates back to 10 am in the morning and if your database creashed at 3 pm,you cannot use the redo log files alone as they have incomplete information.To completely recover the database upto 3 pm,you need archive log files generated between 10 am to 3 pm. In your case since you are missing one archive log file,you cannot perform complete recovery and hence would suffer data loss. -
How to download the database form the call manager 7 to excel?
how to download the database from the call manager 7 to excel document?
No, it never did - the "ask" for the DRS folks to provide unencryption capabilities for their TARs is still out there (several other BUs want this) but so far as I know there's been zero movement on it. I've about given up hope on the DRS folks at this point - pretty clear this isn't a priority for them and I don't see much in the way of any kind of improvements on the product schedule for them at all, this included.
As a side note I've been pushing the Connection product managers to give us off box file system access to limited directories via a proxy service and roles (i.e. similiar to the ODBC proxy but for SFTP access) - armed with this we can provide our own (far superior) disaster recovery tools that work on a pull model instead of the full push DRS is built on - this would get partial backups, individual restores, about 6x increase in performance (more actually - I have a prototype that is hovering right around 10x the speed of DRS end to end), smaller backups, requires less space and resources on the server etc... etc... Fun stuff like doing a full backup on Sunday mornings and deltas every day of the week after that and another full backup Sunday etc... would be possible. Imagine.
I'll probably get more traction with that but it's a long road I'm afraid - as ever, asking your account team to enter a PERs helps - makes it more difficult for the product folks to delay on assigning engineering resources to such efforts. -
How to increase the database size
Hi All ,
Our Client is going to increase their customers from 3.5 million to 5 millions
(12 millions in future ) and there is no increase in the existing licenses..
At present we have very less space in Data base server. We are Going Live at the End of the Month.
How to increase the database size to meet the Client requirements.
we have to increase the No of Processerors etc...
Below are the details of Servers:
System Model: IBM,7040-681
Machine Serial Number: 830D5BF
Processor Type: PowerPC_POWER4
Number Of Processors: 2
Processor Clock Speed: 1904 MHz
CPU Type: 64-bit
Kernel Type: 64-bit
LPAR Info: 4 bgl-svr-biap
Memory Size: 4096 MB
Good Memory Size: 4096 MB
Note : Server is IBM P690.
1) System Lansdcape --> Two System Landsacpe ( Dev to Prod )
2) BW Version --> 3.5
3) SAP Basis --- > 6.4
4) No of Application servers currently having --> Only One Server
Can any body suggest me how to solve this.....
Thanks in Advance..
Kasi ChukkaHi Kasi,
Your question is not very clear, from the looks of it, the load on your client's system will be doubling soon.
You need to look at the system stats on how the system is handling the current load, use transactions ST06, ST04 and ST02 to check if the DB hit ratios are as expected, the cpu idle time, the busy periods. Identify if there is large amounts of paging on the server(candidate for increase in real memory).
On AIX level, you will need to look at CPU / Memory usage.
On SAP Application server, you need to look at SAP Buffers.
On Oracle end, look at SGA stats, if it need to increase, the data growth that is current and estimated growth (DB02).
You will not get an exact answer to it, you will need to analyze the existing load and then estimate (guess). The hardware upgrade will also depend on what the client is willing to spend, its always a good practise to add 20% to what you have estimated as these figures are never accurate.
All the best.
Cheers,
Nisch -
can one tell how to find the database size?
Depends what you mean by database size and how you want the output to look?
Are you referring to the number of rows across all tables of a schema? The number of bytes used by the rows? The number of bytes used by the tablespaces? The number of bytes used by the datafiles? etc. etc. etc. So many options.
Be more clear in your requirements please. -
How to reduce the database size based on MS SQL/Oracle?
Hi,
I had deleted severy clients via SCC5, but the database size is more and more bigger. Do you know how to reduce the database size.
my platform is: NT, MS SQL 2005
NT, Oracle 10.2
Best Regards,
Simon ShenHi Simon,
In the case of SQL you need to check how many space free you have in your datafiles and the based on that you need to Shrink them using DBCC SHRINKFILE command.
Find a couple of reference docs here,
http://www.intermedia.net/support/kb/default.asp?id=996
http://doc.ddart.net/mssql/sql70/dbcc_21.htm
Also i'm pretty sure that if your check the properties of the datafiles in MSSQL Enterprise Manager you get a "Shrink" option.
Regards
Juan
Please reward with points if helpful -
How to specify the database file path when create FDM application
Dear All,
How to specify the database file path (MSSQL) when create FDM application?
Right now, all data file are placed in the D:\ . I want to specify the database files (log and mdf file) in other place. How to do it?
Thanks.Where is the highS2.xml located on the disk? If you add it to your project you should set its Build Action to Content and its Copy To Output Directory to Always in Visual Studio:
Please remember to close your threads by marking helpful posts as answer once your issue has been solved and then start a new thread if you have a new question. -
iPhoto: How can I sort photos within an event. I can't figure out how to activate the Manual Sort button.
Only albums can be sorted manually. Events can only be sorted automatically according to one of the predefined settings "Date, Keywords, Title, Rating".
If you need a manual sort order, selectaall photos in the event and create an album: File > New Album -
How to monitor the database growth?
Dear All,
How to monitor the database growth in SAP.
Is there any t.code available to check the same.
advance thanks,
Sundar C
Note: suitable answers will get maximum reward points.Hai,
You can check the database growth using tcode -db02.
and also use tcode-db02old(if the SAP is Netweaver2004s version) and click on space statistics for monitoring the datbase growth,
Thanks and Regards, -
How to get the Database type from weblogic Db connection
I want to use database version control in my application . that means different database type use different Sql Statement. Such as in weblogic7.0 if I create SqlServer JDBC pool then I will use some special Sqlserver sql Statement . such as some join statement. If I create Oralce JDBC pool then I have to use different Sql statement . because these two database support different Sql statement.
What my question is how to get the database type from the connection.For a normal jdbc driver you can use
Connection.getMetaData()
To get the meta data, in particular the getDatabase...() methods.
That might or might not work.
However, at the very least in the server you have access to the weblogic properties so you can parse the pool property to figure it out. -
How to modify the database by Oracle-ridc-client
How to modify the database by Oracle-ridc-client
First of all, from your question it is not very clear what kind of modifications you intend to do - one correct answer to your question could be "call any non-read-only service", which will result as insert/update/delete to a table somewhere. My guess is that this is not the answer you are looking for.
While working with RIDC (or CIS to answer your other thread at once) you have to understand that you integrate primarily with the application layer of your solution. If you want to modify the database scheme, you might, for instance, add a new metadata field - this is OK, because there is a service that you may call to achieve that. On the other hand you might want to change the db scheme directly (e.g. add a new column to a standard table); here neither RIDC, not CIS will help you unless you create a custom (server-side) service that you will call. Note, however, that you should be doing this only if you are really sure what you are doing. -
How to enter the database in oracle 11g!!
Hi all,
I have installed Oracle 11g , and the SCOTT,SYS,SYSTEM account are locked ( I guess) as i am UNABLE TO ENTER THE DATABASE.
When I open SQL+ , a cmd prompt will appear requesting username ( for which I tried SYS,SYSTEM,SCOTT) upon pressing enter, it request's password ,HERE IS THE PROBLEM .What every i try to enter in the password field, doesn’t get displayed there ,I thick its not accepting anything at all.
I tried sys as sysdba as the username ,didn't work either(insufficent privilages)(windows info: OS-XP sp2, account- administrator),as I am new to SQL Kindly ,SUGGEST ME , HOW TO ENTER THE DATABASE.
Thanks & Regards
keerthi kumarSET
sqlplus
/ as sysdba
startup
exit
THE RESULT FROM THE cmd PROMPT FOR THE ABOVE LINES....
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\KEERTHI KUMAR>SET
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\KEERTHI KUMAR\Application Data
CLIENTNAME=Console
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=KEERTHIKUMAR
ComSpec=C:\WINDOWS\system32\cmd.exe
DEFAULT_CA_NR=CA18
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\KEERTHI KUMAR
LOGONSERVER=\\KEERTHIKUMAR
NUMBER_OF_PROCESSORS=1
OS=Windows_NT
Path=E:\app\KEERTHIKUMAR\product\11.2.0\dbhome_1\bin;C:\WINDOWS\system32;C:\WIND
OWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Common Files\Teleca Shared;C:\Prog
ram Files\Smart Projects\IsoBuster;
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 15 Model 44 Stepping 2, AuthenticAMD
PROCESSOR_LEVEL=15
PROCESSOR_REVISION=2c02
ProgramFiles=C:\Program Files
PROMPT=$P$G
P_SCHEMA=D:\Solid Edge V18\etc\UGSchemas
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\KEERTH~1\LOCALS~1\Temp
TMP=C:\DOCUME~1\KEERTH~1\LOCALS~1\Temp
USERDOMAIN=KEERTHIKUMAR
USERNAME=KEERTHI KUMAR
USERPROFILE=C:\Documents and Settings\KEERTHI KUMAR
windir=C:\WINDOWS
C:\Documents and Settings\KEERTHI KUMAR>sqlplus
SQL*Plus: Release 11.2.0.1.0 Production on Sun Aug 1 07:26:30 2010
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter user-name: / as sysdba
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name: startup
Enter password:
Maybe you are looking for
-
Firefox process running, but no window?
Firefox crashed while I was away from my computer (Windows XP, FF 7.0.1). Re-starting caused the firefox.exe process to appear in the task manager, along with 7 plugin-container.exe processes, but no Firefox window appeared. Re-booting and re-startin
-
Problem in recovering the database!!!
Hi All, I created a new database and wanted to restore the backup of another database into it, I created the required tablespaces and started restore of backup from RMAN using run { allocate channel 'dev_0' type 'sbt_tape' parms 'ENV=(OB2BARTYPE=Orac
-
Hi, We have a requirement where we need to add Z fields in SOS tab using FPM. How this can be acheived ? As of now we added the Zfields in the standard structure BBP_PDS_PARTNER using include INCL_EEW_PD_PARTNER_CSF. Enhanced Standard WDC /SAPSRM/WDC
-
Handling multiple calendar sources
How do I manage multiple calendars on the iPhone? I have an exchange server, caldav server, and the local calendar items. On my iPad there is a calendars button and I can tick on and off specific calendars and see their sources, just like iCal on the
-
How to classify uploaded files
Hello everyone, We have a client's request. Our client needs to classify the uploaded files in the transaction (bid invitation, contrat, bid). In the Documents tab of each transaction, we can see a column named category (you can see the attached file