How to activate the elements in KANK

We have created a new Controlling Area with a new Company Code.
All of the Finance config is done and basic PCA and CCA is required.
I have maintained all of the settings in OKKP, plan versions etc.
Now we are looking at t code KANK which is assigning the number ranges.
I have used this before, however normally for the Controlling Area the elements are there.
I have tried copying from "0001" but is says there are no elements assigned to my Controlling Area.
Can someone remind me how this is done, or what steps I have missed.

I agree with what you are saying, that was my udnerstanding too.
In OKC1 the values are there.
If I check 0001 as the Controlling Area the elements have been assigned to the groups.
However when I try and display my Controlling Area nothing is shown in the groups, ranges etc.
In the overview button there is nothing there for my Controlling Area just that for the other ones.
Have I created the Controlling Area wrong? Do I need to assign something to it to activate the elements to my Controlling Area?

Similar Messages

How to activate WBS Element in Sales Order

Dear All,
How to activate WBS element in sales order?
Thanks & Regards,
PM

Basically in case of Repair and overhaul material is taking inside for repair purpose..for that we create service order in which we r creating component, operation(time. labor, machine) besides we create notification to allow overhead activity for this special activity..
once this service order r created and notification is set.. we r estimating cost for this process and updating sales price(DP82) which further send to customer for approval.. once v receive approval v issue a goods along with parental serviceable material to Plant for Plant maintenance estimation..
so all this procedure obey just like project , in this case we have to assign WBS element into sales order level..
WBS elemet is nothing simply its hierarchy which shows what r the steps followed in project(CJ20N)..
Correct me if i m wrong..
thanks
Mk

How to activate the ATP buckets in APO?

Hi,
We are in the process of changing the ATP buckets in our APO system.
I know the Path in the configuration:
Advanced Planning and Optimization -> Global Available-to-Promise (Global ATP) -> General Settings -> Maintain Global Settings for Availability Check
On the left side you will get three sections:
Global Settings
ATP Buckets (Active)
ATP Buckets (Planned)
I can change the values in (example field Shift Receipt Bucket) the ATP Buckets (Planned) section and save it with a transport. Now the question is how to activate the buckets. Is there another transaction for this? SAP Help doesn't specify how to activate.
Any ideas are highly appreciated.
Thanks,
Mahesh

Hi,
To activate the buckets one need to check the box 'Current' in the options under ATP Buckets (Active). Also, as referred earlier by Dipthi do look up the documentation under:
SAP Advanced Planning and Optimization (SAP APO) -> Global Available-to-Promise (Global ATP) -> Settings for Global ATP -> General Settings for Global ATP ->Definition of Buckets for ATP Time Series ->Activation of Bucket Parameters for ATP Time Series.
The details are as beneath:
Use
If you change bucket parameters (see Definition of Buckets for ATP Time Series), these must be activated subsequently for the ATP time series.
Features
The system activates the bucket parameters in the following situations:
Since activation in each of the situations described below leads to downtime, you should change bucket parameters less frequently than other Customizing settings.
·        Creating the active planning version for a client using transaction /SAPAPO/MVM
If you set up a system again, you should process the bucket parameters before you create the active planning version. The bucket parameters are thus activated automatically.
·        Initializing SAP liveCache for all clients using transaction LC10
In the case of an upgrade, you should process the bucket parameters before activating SAP liveCache. The bucket parameters are then activated automatically.
·        Executing the report /SAPAPO/OM_ATP_REBUILD_TS
The system only rebuilds the ATP time series here.
In this case, the SAP liveCache administrator must execute the following steps:
                            a.      Shut down SAP liveCache.
                            b.      Replace the com-file registration:
                                                  i.       At command line level, go to the SAP subdirectory of the SAP liveCache installation.
                                                ii.       Under Microsoft Windows, save the original registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst), for example, by renaming or copying to another directory.
                                               iii.       Under Microsoft Windows, rename the registration file SAPAPO_REBUILD.lst as SAPAPO.lst (UNIX: libSAPAPO_REBUILD.lstas libSAPAPO.lst) or copy it to another directory.
                                               iv.       Under Microsoft Windows, rename the registration file SAPATP_REBUILD.lst as SAPATP.lst (UNIX: libSAPATP_REBUILD.lstas libSAPATP.lst) or copy it to another directory.
                            c.      Launch SAP liveCache.
                            d.      Execute the report /SAPAPO/OM_ATP_REBUILD_TS.
                            e.      Shut down SAP liveCache.
                              f.      Replace the com-file registration by replacing the registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst) with the original versions under Microsoft Windows.
                            g.      Launch SAP liveCache.
Regards
Vinod

How to activate the IS-Retail in ECC 6.0 R/3 system

Dear Guru's...........
Can any one tell me how to activate the IS-Retail in ECC 6.0 R/3 system.
I have IDES system in my home I donu2019t know how to activate retail settings.
Please suggest me how to do that.
Regards
dnr

Dear DNR,
SPRO --> IMG --> Activate SAP ECC Extensions (Or, T. Code: SFW5)
Go to Tab: Industry Business Function
Select Business Function Set: ISR_RETAIL - SAP Retail
A new line will be appeared below.
Current Status will be OFF. Click within Field: Current Status. It will pop-up a list. Select "X - ON".
Important: I've read somewhere - Once Activated, cannot Roll-back.
Best Regards,
Amit
Note: For more, go to - http://help.sap.com
Follow the menu tree: SAP for Industries/SAP for Retail
Click on the link for "SAP industry Specific Components"
Choose the document "Business Function Set Retail"
Also,
Check https://websmp103.sap-ag.de/erp-upgrade --> mySAP ERP 2005: Updated upgrade FAQs, there you will find the list of Industry solutions which are supported by mySAP ERP.
https://websmp103.sap-ag.de/~sapidb/011000358700006168472006/
You must this thread in to [Forum: SAP Enhancement Packages|/community [original link is broken]; OR [Forum: Enterprise Resource Planning (ERP)|Enterprise Resource Planning (SAP ERP); as Nowhere, it is related to SAP SD.

How to activate the Check box in Purchase Order after Goods Receipt

Hi All,
How to activate the check box after Goods receipt of Purchase order in Item view (Goods Receipt is completed).
Where t make the settings in SPRO.
Regards,
Shailendra Hadkar

Hi
SPRO - SAP IMG- Material management - Inventory management and physical inventory - Goods receipt - create purchase order automatically - activate auto Po creation for movement type.
Then activate the auto PO creation in Vendor master - Purchasing view
Check it out.
Regards,
raman

IPhoto: How can I sort photos within an event? I can't figure out how to activate the Manual Sort.

iPhoto: How can I sort photos within an event. I can't figure out how to activate the Manual Sort button.

Only albums can be sorted manually. Events can only be sorted automatically according to one of the predefined settings "Date, Keywords, Title, Rating".
If you need a manual sort order, selectaall photos in the event and create an album: File > New Album

How to check the element in xml file by xpath

hi all,
* How to check the element in xml file by xpath
for the following XML file,
* I want to check whether
the element (sage) is present or not in the following xml file XPATH expression...
* I have tried by the following expression ,
NodeList result = (NodeList) xpath.evaluate("//*:student/*:sage/text()",xml_dom,XPathConstants.STRING);
System.out.println(result.item(0).getLocalName()); * I want to get the Element sage as String value....
but i am not able to get the element,why that ??? and How to do that ???
MyXML File :
<x:student>
<x:sname>aaa</x:sname>
<x:sage>26</x:sage>
</x:student>
Thanks,
JavaImran

<code>* Thanks for reply....
* </code><code>In </code>
<code>x:student element x represents the namespace...thats why i put *:student in my expression....
"//*[local-name() = 'student']/*[local-name() = 'sage']/text()"* By the above code , i am not able to get the sage as string from
</code> resul.item(0).getLocalName() method.......?
* How to get that as string format ?

How to activate the option posting period for T.code F.2E

HI All,
When we execute T.code F.2E the selection parameters available are
1. company code
2. partner company code
3. open at key date
4. display currency.
As the program documentation says we can reconcilie by selecting option for posting period in F.2E
Below is the SAP documentation on the program.
You use the Posting period selection option to specify the time period in which the posting dates of the documents need to fall in order to be included by the program. Open items, cleared items, and payment documents are all selected. See the section Parameter Open for key date and Selection Option Posting period for further information. If you want to start the program with this date selection, the option must be selected accordingly.
But the field for posting period is not available in selection parmeter, we are on 4.7 EE version.
Please let me know how to activate the option for posting period in selection parameters for T.code F.2E
Thanks in advace.
Regards,
Raj.

Hi,
I have tried to execute the program FBICRC003_DATA_REC. But program doesn't exist.
We are on 4.7 version. I have executed program RFICRC00, but stil can't find the option posting period.
Please confrim.
Thanks
Regards,
Raj.
Edited by: Raj Racha on Dec 27, 2010 10:58 AM

I have an iphone4 but the sim is not working on it, how to activate the sim

i have iphone4 but the sim is not working on it. i have a airtel sim and is not working on my iphone. so plz suggest me how to activate the iphone

Where is the iPhone from?
I think your iPhone is locked to an original carrier, you need to contact them about unlocking and if you qualify.

How to access the element s in a hashMap with order

Does anybody know how to access the elements in a hashMap with order.
I know set is a collection that doesn't gaurantee the order so the iterator of keySet will not gaurantee the order.
Is there any way to solve this?
Thanks

If you mean the order in which the key/value pairs where added to the
map, have a look at the LinkedHashMap class. If you mean 'natural'
order, you shouldn't be using a HashMap at all then; have a look at the
TreeMap class instead.
kind regards,
Jos

How to show the elements of an array?

How to show the elements of an array, when the array size changes every loop?
It's possible to use node property?
thanks
Vicens
Win XP/ LV7.1
Attachments:
show elements.PNG ‏184 KB

Basically it is (at least in LV8.0). There is a property "Number of Rows" which sets the number of visible rows. If your 1D array is placed horizontally, use "Number of Columns".
Using LV8.0
Don't be afraid to rate a good answer...

HT201335 i cant find how to activate the airplay on my ipad 3 can you please help me?

i just updated the ios 6but i can not find how to activate the airplay function in to my ipad, can you please help me

Firefox doesn't do email, it's strictly a web browser.
Easily access your computers email programs & web mail with GetMail <br />
http://webdesigns.ms11.net/getmail.html

HT2731 How can I transfer photos from my Windows computer to my Ipad. I already have the photos transfered into a photo stream file. How to activate the transfer ?

How can I transfer photos from my Windows computer to my Ipad.
I already have the photos transfered into a photo stream file.
How to activate the transfer ?

Hey Juergen119,
I would recommend syncing your photos from your computer to your iPad by using iTunes:
iTunes: Syncing photos
http://support.apple.com/kb/HT4236
First, if you want to set it up to work via iCloud, I would check and make sure My Photo Stream is set up correctly on your devices:
To use My Photo Stream you need an iCloud account, compatible devices, and up-to-date software:
iPhone, iPad, or iPod touch with iOS 5.1 or later
Mac with OS X Lion v10.7.5 or later and iPhoto 9.2.2 or Aperture 3.2.3 or later
Apple TV (2nd generation) with Apple TV Software Update 5.0 or later
PC with Windows 7 or later and the iCloud Control Panel 2.1 or later for Windows
For complete iCloud setup instructions, visit How to set up iCloud.
Then, once it is set up, you can upload your photos to My Photo Stream by following these directions:
PC with iCloud Control Panel 2.0 or later: Open a Windows Explorer window and under Favorites select iCloud Photos if you are using iCloud Control Panel 3.0 (or Photo Stream if you are using 2.0 to 2.1.2). Open My Photo Stream. Click the "Add photos" button. Select the photos to import to My Photo Stream, then click Open.
via: iCloud: My Photo Stream FAQ
http://support.apple.com/kb/HT4486
Welcome to Apple Support Communities!
All the best,
Delgadoh

Portege M700 - how to activate the fingerprint login

Hi everyone.
I've had my M700 for about three months now. I always knew there was a fingerprint login but just recently, I wanted to get it activated.
Does anyone know how to activate the fingerprint login? I've tried searching for hardware and going through Program Files but nothing...
Thanks.

Hi
Do you have preinstalled program called True Suite Access Manager.
Its fingerprint software. You should find it in the Toshiba Utilities folder!

How to Activate the Table which Doesn't Exist - Can I create Table in SE11

Hi Gurus,
I am a BASIS Person ..so, I don't have much idea about ABAP Developement side . But, while applying patches to one of the SAP Component, I get the following error message ( usr\sap\trans\log ) :
Phase Import_Proper
>>>
SAPAIBIIP7.BID
1 ED0301 *************************************************************************
1 EDO578XFollowing objects not activated/deleted or activated/deleted w. warning:
1EEDO519X"Table" "WRMA_S_RESULT_DATA" could not be activated
1EEDO519 "Table Type" "WRMA_TT_UPDTAB_DSO" could not be activated
1 ED0313 (E- Row type WRMA_S_RESULT_DATA is not active or does not exist )
2WEDO517 "Domain" "WRMA_KAPPL" was activated (error in the dependencies)
2WEDO517 "Data Element" "/RTF/DE_FISCPER" was activated (error in the dependencies)
2WEDO517 "Data Element" "/RTF/DE_FISCVARNT" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RCLASV" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_AMNT" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_INV" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_OBJ" was activated (error in the dependencies)
2WEDO549 "Table" "V_WRMA_TRCLASVER" was activated (warning for the dependent tables)
2WEDO549 "Table" "V_WRMA_TRCLASVPE" was activated (warning for the dependent tables)
2WEDO549 "Table" "V_WRMA_TRCLPERCL" was activated (warning for the dependent tables)
2WEDO549 "Table" "WRMA_S_STOCK_SELECTION_DATE" was activated (warning for the dependent tables)
<<<
Now, I checked Domain WRMA_KAPPL in SE11 and it diplays that it is partially active :
" The obeject is marked partially active for the following reasons :
   Errors occured when adjusting dependent Objects to a change. Some of the dependent objects could not
   be adjusted to this change. To adjust the dependent objects, you must perform the following actions
   the next time you activate this object.
                    - SET THE SYNP TIME STAMP IN THE RUNTIME OBJECT OFALL DEPENDENT OBJECTS
My question is - how to activate this SYNP Time Stamp.. ?
                      - Once I activate this SYNP Time Stamp.. How do I activate this ..in SE11 or some other
                        TCode..
Any / ALL Help is highy appreciated and would be rewarded with appropriate Reward Points.
Thanks,
Regards,
- Ishan
>> Ok, Now I forcefully activated the Domain and then all the 5 Data Elements in SE11 ...now I have error
     that table WRMA_S_RESULT_DATA and WRMA_TT_UPDTAB_DSO Could not be activated...
     ..And in SE11 > Input the first / Second Table > Excute > Output : Table Does not Exist !!!
      - Now, How do I activate something which does not exist in the first place ?
    Any Input about this ?
Thanks,
Regards,
- Ishan
Edited by: ISHAN P on Jun 19, 2008 3:44 PM

Read note 1152612 - Incorrect component type in structure WRMA_S_RESULT_DATA.
The error occurs in Release BI_CONT 703 Support Package 9.
If you require an advance correction for Support Package 9, make the following manual changes if the InfoObject 0TCTLSTCHG is inactive in your system.
1. Use transaction RSA1 to call the Data Warehousing Workbench.
2. Check whether the InfoObject 0TCTLSTCHG was already activated by the compilation process the first time you called transaction RSA1. You can use transaction RSD1 to check this by entering 0TCTLSTCHG in the "InfoObject" field and choosing "Display". Proceed as follows if the InfoObject is still not active:
3. Go to BI Content activation.
4. Select "Object Types".
5. Open the "InfoObjects" tree and select "Objects".
6. Search for the InfoObject 0TCTLSTCHG and select it.
7. Transfer the object and activate it.
These steps activate the required component type /BI0/OITCTLSTCHG. You can check again in transaction RSD1 to ensure that the InfoObject 0TCTLSTCHG is available as active.
Jacek Fornalczyk

How to activate the elements in KANK

Similar Messages

Maybe you are looking for