How to activate the new enhancement project thr cmod

I hv created new project thr CMOD as ZQMUDR and i hv created the include pgm and also it is working fine in development.
i hv transported both to production server. but it is not working in production. how to identify the problem in production. I don't whether we hv to activate the same in production or not.

hai praveen
u might not have transported to produciton properly
just check wether the project is active or not
if not try to re transport from development may be u might have missed something
u can activate in prodcution if u have authorizations but try to transpoort from developmetn once again
m.a

Similar Messages

  • How to activate the new fields on material master(MM01/MM02/MM03) for existing Materials

    Hi,
    We have a requirement to add  some custom fields as a new tab in additional data option(Descriptions, Unit of measure, etc.) in Basic data of Material master (MM01/MM02/MM03). I have successfully added and these custom fields and they are not part of standard(MARA, MARC) but a custom table and the updates are also done in custom table.
    For new materials, I can see the new tab in additional data screens of basic data view and I could successfully create/change/display using MM01/MM02/MM03. However I cannot see the new tab/fields for existing materials in the system in all 3 tcodes (MM01/MM02/MM03). This is not a main view in material master so that I can extend it by MM01.
    Is there any setting or mass generation program I have top perform so that I can see and maintain these new fields for existing materials. Appreciate any leads or help on this.
    Thanks,
    Harry

    Hello Harry,
    Goto t.code SPRO ---> Display IMG --->  Logistics - General --> Material master --> Configuring the material master --> Create program for customized screens
    Use the above path and create the screen and assign it to the sequence using the below link as reference.
    **************** - Tips - Implementing screen exits for MM01/MM02/MM03
    Regards,
    Thanga

  • How to add a new column (Project Number) in the action items table under NPD Module?

    There are two projects with same name and created by same person in NPD.
    So when it is displayed in "Action Items" table, It looks similar.
    To avoid this, I need one more column (Project Number) to be added in the "Action Items" table and " Strategic briefs and projects" table.
    So, How to add a new column (Project Number) in the "Action Items" table and " Strategic briefs and projects" table under NPD Module?
    Please do the needful.

    There is no out of the box configuration available to add columns to NPD action items.   As always we welcome enhancement requests. 
    Thanks
    Kelly

  • How do I activate the new Portuguese spelling rules in Mavericks?

    Dear list members, I'm using a MacBook Pro 13" (model 9,2) and MacOS 10.9.4. How do I activate the new Portuguese spelling rules? I tried setting the system to Portuguese (Brazil) and Portuguese (Portugal), but it uses only the old spelling rules. The new rules are available only through third-party applications, such as MS Office for Mac. Could you please help me? Thanks.

    morceg@o wrote:
    How do I activate the new Portuguese spelling rules?
    You have to install another dictionary that uses those rules.  See
    http://m10lmac.blogspot.com/2011/06/extra-spell-checking-dictionaries-for.html
    Or use one of the apps that has its own dictionaries that meet your requirement.

  • How to activate a new release Strategy Of PR without deleting the previous one?

    Dear  All,
    1=I have a release strategy in purchase requisition which is without classification and active in system.
    2= Now i configured a New Release Strategy for Purchase requisition   which is with classification
    My question is i want to activate the New one with classification  in System without deleting the previous one.
    Should it possible? and How?
    Ritesh.

    Dear  Dev,
    My old release strategy at item level.
    But  the New one  is at header Level.
    But the previous  one  showing  the release Indicator.
    But  when i delete  the old configuration the old release indicator vanishes.
    But the thing is  in Pr with out classification we have same Pr doc.Type
    But in New Configuration We want to at header level  and with same doc   type.
    so without  deleting  the old one if i activate the New Strategy whether the system allow me
    to see the New Release Indicator?
    As  My testing when i deleted the old one the Old indicator in Line item Level vanishes.

  • How to activate the IS-Retail in ECC 6.0 R/3 system

    Dear Guru's...........
    Can any one tell me how to activate the IS-Retail in ECC 6.0 R/3 system.
    I have IDES system in my home I donu2019t know how to activate retail settings.
    Please suggest me how to do that.
    Regards
    dnr

    Dear DNR,
    SPRO --> IMG --> Activate SAP ECC Extensions (Or, T. Code: SFW5)
    Go to Tab: Industry Business Function
    Select Business Function Set: ISR_RETAIL - SAP Retail
    A new line will be appeared below.
    Current Status will be OFF. Click within Field: Current Status. It will pop-up a list. Select "X - ON".
    Important: I've read somewhere - Once Activated, cannot Roll-back.
    Best Regards,
    Amit
    Note: For more, go to - http://help.sap.com
    Follow the menu tree: SAP for Industries/SAP for Retail
    Click on the link for "SAP industry Specific Components"
    Choose the document "Business Function Set Retail"
    Also,
    Check https://websmp103.sap-ag.de/erp-upgrade --> mySAP ERP 2005: Updated upgrade FAQs, there you will find the list of Industry solutions which are supported by mySAP ERP.
    https://websmp103.sap-ag.de/~sapidb/011000358700006168472006/
    You must this thread in to [Forum: SAP Enhancement Packages|/community [original link is broken]; OR [Forum: Enterprise Resource Planning (ERP)|Enterprise Resource Planning (SAP ERP); as Nowhere, it is related to SAP SD.

  • How to add the new tab in Quotation VA21

    Hi,
    How to add the new tab after Addition data B in line item in Quotation VA21?
    Please help me for this query.
    Devendra

    Dear Devendra,
    Use the program SAPMV45A & the screen number provided by SAP is 8459.If you activate this screen and include the screen in 4462.
    PROCESS BEFORE OUTPUT.
    *                            Verarbeitung vor der Ausgabe
       MODULE VBAP_BEARBEITEN_VOR.
       CALL SUBSCREEN KUNDEN-SUBSCREEN_8459 INCLUDING 'SAPMV45A' '8459'.
    PROCESS AFTER INPUT.
    *                            Verarbeitung nach der Eingabe
    * Hier weitere Prüfungen
       CALL SUBSCREEN KUNDEN-SUBSCREEN_8459.
    Regards,
    Anand

  • IPhoto:  How can I sort photos within an event?  I can't figure out how to activate the Manual Sort.

    iPhoto:  How can I sort photos within an event.  I can't figure out how to activate the Manual Sort button.

    Only albums can be sorted manually. Events can only be sorted automatically according to one of the predefined settings "Date, Keywords, Title, Rating".
    If you need a manual sort order, selectaall photos in the event and create an album: File > New Album

  • How to update the New Depreciation Area in Asset Master Data

    Hi,
    Please guide me
    How to update the New Depreciation Area in the Asset Master Data.
    Regards
    Srinivas

    Hi,
    a) The procedure is as follows:
    1. Create Depreciation area via OADB.                                                                               
    2. Activate Depreciation area via OAYZ.                                                                               
    3. Automatic opening of new depreciation are via AFBN and program  
       RAFABNEW :                                                                               
    3.1     Indicator: Leave values initial = not ticked.           
               Do not set this indicator if you want the system        
               to copy the values from depreciation area 01.                                                                               
    3.2     Indicator: Leave values initial = ticked.               
               Set this indicator if you want to open the newly created
               depreciation area without any values i.e. blank.                                                                               
    4. Recalculate depreciation via AFAR and program RAAFAR00.   
    b) Helpful notes:
    430618 (Procedure for setting up new depreciation area)                           
    301113 (Restrictions of RAFABNEW)                                                 
    421549  (RAFABNEW: Error with closed fiscal years)
    c) A documenttation you find if you enter RAFABNEW in SE38 and press the butto "documentation"
    regards Bernhard

  • How to activate the ATP buckets in APO?

    Hi,
    We are in the process of changing the ATP buckets in our APO system.
    I know the Path in the configuration:
    Advanced Planning and Optimization -> Global Available-to-Promise (Global ATP) -> General Settings -> Maintain Global Settings for Availability Check
    On the left side you will get three sections:
    Global Settings
    ATP Buckets (Active)
    ATP Buckets (Planned)
    I can change the values in (example field Shift Receipt Bucket) the ATP Buckets (Planned) section and save it with a transport. Now the question is how to activate the buckets. Is there another transaction for this? SAP Help doesn't specify how to activate.
    Any ideas are highly appreciated.
    Thanks,
    Mahesh

    Hi,
    To activate the buckets one need to check the box 'Current' in the options under ATP Buckets (Active). Also, as referred earlier by Dipthi do look up the documentation under:
    SAP Advanced Planning and Optimization (SAP APO) -> Global Available-to-Promise (Global ATP) -> Settings for Global ATP -> General Settings for Global ATP ->Definition of Buckets for ATP Time Series ->Activation of Bucket Parameters for ATP Time Series.
    The details are as beneath:
    Use
    If you change bucket parameters (see Definition of Buckets for ATP Time Series), these must be activated subsequently for the ATP time series.
    Features
    The system activates the bucket parameters in the following situations:
    Since activation in each of the situations described below leads to downtime, you should change bucket parameters less frequently than other Customizing settings.
    ·        Creating the active planning version for a client using transaction /SAPAPO/MVM
    If you set up a system again, you should process the bucket parameters before you create the active planning version. The bucket parameters are thus activated automatically.
    ·        Initializing SAP liveCache for all clients using transaction LC10
    In the case of an upgrade, you should process the bucket parameters before activating SAP liveCache. The bucket parameters are then activated automatically.
    ·        Executing the report /SAPAPO/OM_ATP_REBUILD_TS
    The system only rebuilds the ATP time series here.
    In this case, the SAP liveCache administrator must execute the following steps:
                                a.      Shut down SAP liveCache.
                                b.      Replace the com-file registration:
                                                      i.       At command line level, go to the SAP subdirectory of the SAP liveCache installation.
                                                    ii.       Under Microsoft Windows, save the original registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst), for example, by renaming or copying to another directory.
                                                   iii.       Under Microsoft Windows, rename the registration file SAPAPO_REBUILD.lst as SAPAPO.lst (UNIX: libSAPAPO_REBUILD.lstas libSAPAPO.lst) or copy it to another directory.
                                                   iv.       Under Microsoft Windows, rename the registration file SAPATP_REBUILD.lst as SAPATP.lst (UNIX: libSAPATP_REBUILD.lstas libSAPATP.lst) or copy it to another directory.
                                c.      Launch SAP liveCache.
                                d.      Execute the report /SAPAPO/OM_ATP_REBUILD_TS.
                                e.      Shut down SAP liveCache.
                                  f.      Replace the com-file registration by replacing the registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst) with the original versions under Microsoft Windows.
                                g.      Launch SAP liveCache.
    Regards
    Vinod

  • How To Create The New VO in Standered Page?

    Hi Gurus,
    Pl z help me how to create the new Custom VO in slandered page,and how to attach that VO in custom RN in all are slandered page only.
    Regards,
    Srini

    Hi Sara,
    <i>1. Could you please tell me how to create the new webservice in XI?</i>
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f3ee9d7-0901-0010-1096-f5b548ac1555
    <i>2. What tools we have to use to create it.?</i>
    /people/community.user/blog/2006/09/19/xi-webservice-studio--a-plain-jane-soap-tool
    http://www.gotdotnet.com/Community/UserSamples/Details.aspx?SampleGuid=65a1d4ea-0f7a-41bd-8494-e916ebc4159c
    Altova is also a good option
    <i>3. How to send the SOAP request to XI?</i>
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
    SAP Note 856597
    An Add-on
    /people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
    Regards,
    Prateek

  • How to transfer the stock form Project stock to Sale order stock

    Hi
    How to transfer the stock form Project stock to Sale order stock
    I tried to do this with movement type 413Q
    System is giving me error
    Valuated project stock not allowed with customer stock.
    Message no. KI346
    How to do this
    Thanks
    NK

    You can use Mov Type 412-Q
    412     Q     Transfer posting project to own - reversal
    Thanks
    Rajesh

  • HT1208 Where do I find a tutorial about how to use the new iTunes? I have version 11.1.3 (8). I looked on the Apple web site but only found info extolling the virtues of iTunes, not how to use it.

    Where do I find a tutorial about how to use the new iTunes? I have version 11.1.3 (8). I looked on the Apple web site but only found info extolling the virtues of iTunes, not how to use it.

    Use it the same way as previously.
    ctrl B shows the menus.
    ctrl S shows the sidebar.
    What else do you need help with?

  • How to activate the Check box in Purchase Order after Goods Receipt

    Hi All,
    How to activate the check box after Goods receipt of Purchase order in Item view (Goods Receipt is completed).
    Where t make the settings in SPRO.
    Regards,
    Shailendra Hadkar

    Hi
    SPRO - SAP IMG- Material management - Inventory management and physical inventory - Goods receipt - create purchase order automatically - activate auto Po creation for movement type.
    Then activate the auto PO creation in Vendor master - Purchasing view
    Check it out.
    Regards,
    raman

  • HT201304 Visa has changed for the purchase of Apple products, i did not know how I put the new MasterCard number to finish the process of buying products Thank you

    Visa has changed for the purchase of Apple products, i did not know how I put the new MasterCard number to finish the process of buying products Thank you
    i have ibad mini
    and iphone4
    laptop sony
    can you sent for me the anser

    Changing Account Information  >  http://support.apple.com/kb/HT1918

Maybe you are looking for