How to activate & use Refactoring Assistant

Hi Experts,
I want use Refactoring Assistant in ABAP Editor,
I've read a little from this link :
http://help.sap.com/SAPHELP_NWPI71/helpdata/EN/44/2afce330063ecee10000000a1553f6/frameset.htm
But couldn't find menu item in context menu and other menus in ABAP editor , se38 / se80
about refactoring.
Does anyone knows how to activate it?
Thanks.

In short,
1. Select the class and change to the
2. Class Editor. Make sure you are in Change mode.
3. Choose Utilities ® Refactoring Assistant.
The Assistant is started in a separate window.
1. Select the component to be moved and move it to the name of the superclass using Drag & Drop.
You can move several components at one time with multiple selection.
1. Save using the corresponding icon.
2. Close the Assistant.

Similar Messages

How do I use Migration Assistant to get my Mail and Keychain settings from

How do I use Migration Assistant to get my Mail and Keychain settings from my Power Mac G5 2.3Ghz? I just purchased a new 2.5 MacBook Pro which will be delivered tomorrow, and I want to to know how to transfer Mail and Keychain?
Thank You in advance for your reading and replying.
Kindest Regards,
Sebastian

Rather than using Migration Assistant, which can cause trouble with the PPC to Intel change, simply boot the G5 in FireWire target disk mode and manually transfer the following:
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/com.apple.mail.plist
You might want to look over Kappy's helpful guide for migrating, which covers the full process for a manual migration (including the above files).
Hope this helps...

How can I use migration assistant to load my new Macbook Air?

How do I use migration assistant to load my new Macbook Air? Can this be done only wirelessly?

No, you can transfer from a Mac wirelessly, wired ethernet, Thunderbolt or Firewire. Your older Mac must have the same connection, but you can use adaptors if necessary. For example, you can use an Ethernet cable with an Ethernet-Thunderbolt adaptor if your older Mac has an ethernet port.
Wireless tends to be pretty slow (can take many hours) so it's recommended to choose a wired connection whenever you can.
Here's more information:
http://support.apple.com/kb/HT4889
Matt

How can i use migration assistant from a Power PC G4 powerbook?

How can i use migration assistant from a Power PC G4 laptop that can't run 10.5 to a new mini running Lion? Mini's MA says I have to upgrade the laptop's MA but the upgrade requires 10.5 as a minimum
help,please
jan

That is correct. You'll need either an ethernet cable or a firwire cable and a firewire to thunderbolt adapter to connect the two macs together. Here's info on Migration/Setup assistant
http://support.apple.com/kb/HT4889?viewlocale=en_US&locale=en_US

How do I use DAQ Assistant to output DC on an AO?

My background includes 15 years of programming PLC's. AO's were simple. You passed the AO a value between preset ranges and it output a proportional voltage signal based on the hardware capabilities.
I foolishly thought LabView and DAQ AO's would be about the same. I built a vi to generate a DC signal which I could control the amplitude of. I also tied it to a chart to monitor how it worked. I managed to draw some very pretty ramping pictures on my chart, but when I put a DMM across the physical terminals I see no voltage.
Then I used MAX to test the channel and measured it again. Now I see voltage on my DMM. I was attempting to use the DAQ Assistant to do this. Do I need to force it to re-read the changing value I am sending it? All of the examples I find show me more primitive methods, and I could not seem to get any of them to do what I want either. I need to send a speed reference to a DC drive.
My incorrect method was to recursively add a value for ramping the signal up or subtract to ramp down. This method works perfectly on an industrial PLC. I connected a chart to the signal just as it entered the DAQ Assistant, but the only way I could check the actual was with the DMM.
Are there any examples that use the Assistant? If not then I guess I will have figure out how to use the primitives anyway.
technomage

Hello technomage,
It looks like we have discussed this problem in another thread (found here). If you have any other questions about it, please post there.
Regards,
Jesse O.
Applications Engineering
National Instruments
Jesse O. | National Instruments R&D

How to activate used ipod 5 ?

please i want to know how to activate my ipod touch 5 i bought it used it says that my icloud mail cannot activate this ipod plzzzz help !!!!

Probably the least expensive choice would be to switch to the carrier the iPhone is locked to...unless you have a contractural arrangement with EE.
If that is not viable even though you stated it as an option, then it would be least painful to seel the Vodaphone iPhone and by an EE iPhone or one that is unlocked.
Apple will not unlock since they have contracts with the carriers as part of the carrier subsidization so they would be hurting their clients by unlocking. So it is only the carrier, the Apple client, that can unlock.
Jailbreaking is a very poor option because of the potential bricking that will occur at some point in the iPhone's life.

HT5569 I got a new iphone 5s, how to activate using itunes

Hi, i got an Iphone 5s, please help me how to connect to itunes to activate it.

Connect it to your Mac using the cable that it came with and then iTunes will open automatically. Just follow the instructions from there.

How can I use Migration Assistant to read a backup stored in a folder on an external drive?

My MacBook Pro (Mountain Lion) died on me. I removed the hard drive and copied all the folders under my /User/stewart to an external hard drive.
I have an IMac which has just been upgraded to Mavericks. I want to transfer some of the data from my MacBook Pro to the iMac. I want to transfer my email from the MacBook Pro to the iMac, including:
- All stored emails
- All account settings
I assumed that migration assistant could do this for me. But when I tried to use it, there was no option to read from a disk that wasn't a Time Machine backup or a startup disk.
Is there any way I can move just the email onto teh Mavericks machine.
The Macbook Pro is just about to be shipped off for repair. I could get the disk out of it again and then run Migration Assistant with it. It would be very time consuming as I don't have it with me at the moment.
So I am hoping someone can help me with a quicker way.
Many thanks in advance.

Migration Assistant will recover data from a system disk or a Time Machine backup.
Since you moved the files yourself to the external drive, you are going to have to move what you have back yourself.
The files for email are stored in ~/Library/Mail. Since you did not copy them to the external, your emails are now lost.
The same goes for your account settings.
Allan

How do I use migration assistance with hard drive reader for dead macbook

Hi,
My old mac laptop died without warning.
I took it to the apple store and they suggested getting a hard drive reader and using that to transfer
across my files.
I've connected it up and have requested the migration assistant to transfer the files. Last night it
said it would 27 hours to transfer and now this morning it is saying 72 hours. This seems to
be a very long time - is it correct? Can I make it go faster or is there another way?
I've got a bit of music on there but nothing excessive. I do have about 15,000 photos though.
I'm not very techy so any assistance would be very helpful
Thanks
Sarah

Hi, that's far to long, unless maybe it's USB1.1 speed.
If USB2 or Firewire, I'd start ober & try Disk utility>Repair Disk on the external drive.

Using migration assistant to setup a new iMac from a TimeCapsule backup?

how do I use migration assistant to setup a new iMac from a TimeCapsule backup

OS X: How to migrate data from another Mac using Mavericks

I restored my iphone 4 using i tune and now it is asking for activation. How to activate it..?

I restored my iphone 4 using i tune and now it is asking for activation. How to activate it..?

Setting up and activating iPhone
To set up and activate iPhone, turn on iPhone and follow the Setup Assistant. The Setup Assistant
steps you through the setup process, including connecting to a Wi-Fi network, signing in with or
creating a free Apple ID, setting up iCloud, turning on recommended features such as Location
Services and Find My iPhone, and activating iPhone with your carrier. You can also restore from
an iCloud or iTunes backup during setup.
Activation can be done over a Wi-Fi network or, with iPhone 4S or later, over your carrier’s cellular
network (not available in all areas). If neither option is available, you need to connect iPhone to
your computer running iTunes for activation. You might also read http://support.apple.com/kb/TS3424

How do I convert my Windows 7 Folder to an ISO image to burn to a USB, in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

How do I convert my Windows 7 Folder to an ISO image to burn to my USB Flash drive (16GB) in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

Sorry - confusing - My question has NOT been solved yet - can anyone help?

HT4889 I have accidentally created another account when using Migration Assistant to a new MBA. How do I now 'migrate' all the files from both accounts into one to save myself having two accounts, both of which are me? Help?

I have accidentally created another account when using Migration Assistant to a new MBA. I have read that I probably should not have skipped migration in the initial set up and the problem would have been avoided but, alas, here I am. Does anyone know how I can 'migrate' all the files from one of the accounts that has been created to the other, so then I can delete it and have a single user on the computer seeing as I am the only person using it? I have read starting again, if this is the way to go, where is the best place to start 'starting again'?

Yes definitely should see it but its not coming up (I don't think) when I log out of 2nd user and into the main account. Opening finder in the 2nd account, I can obviously find the public folder because thats where I dropped all the files, but when in the main account, it can't be found. The only public folder that comes up is the folder for that account (main account) and it does not display files I'm looking for. Frustrating....
EDIT: Have found it through a round-about way but all music and photo and movie etc files have a red stop sign disallowing them from being transferred. Can you guess what the next question will be?

I have used migration assistant but new profile is created, how do i merge into one

I have recently purchased Mac book and have used migration assistant to transfer files from my old windows PC.
Due to some issues when using migration tool i had to transfer in segments, each time i did this a new user was created.
I have asked for some help and was advised that users cannot be merged however the files can be shared via dropbox.
I have received instructions as to how to do this but am stuck as once I get to the point of dropbox, I do not know what step to take next to add files into dropbox?.
Below are instructions
Pick a User Account your going to keep, make sure it's a Admin account and if need to, log into another Admin account and make it so in System Preferences > accounts.
One logs out of their current account by using the Apple menu > Log out.
Next while in one of the accounts your later planing on removing, go to the Finder > Go > Computer and window opens.
Open the MacintoshHD partition, then the Users folder and the User Account you plan to keep, then the Public folder and then locate the DropBox folder for that User. Any files placed in there will change permissions and be accessible to that user when you log into it.

The Dropbox folder is a subfolder of the home folder, which has the same name as the user account. It's under the Users folder at the top level of the startup volume ("Macintosh HD," unless you gave it a different name.)

How to use migration assistant without creating dual user accounts

I want to use migration assistant to transfer apps, software & files on my macbook pro to my new macbook air. How can I do this without creating two user accounts for myself on the m-book air -- my account from the m-book pro & the one that the air makes me create as soon as I do start-up? Can I just use the same name & password for both? or will that make things go badly awry?
Thanks!

If you have not booted the MBA for the first time and gone through the Setup Assistant, then I would use the Setup Assistant to make the transfer before you even create another user account. However, if you've already created the new user account on the MBA, then create a new admine one with a different username than the account you will migrate. Log into this new account, delete the first account you made, then use Migration Assistant to transfer your account from the MBP.

How to activate & use Refactoring Assistant

Similar Messages

Maybe you are looking for