How To Activate Work flow Templates for Campaign Automation

Hi friends,
i created all settings for campaign Automation.when i click start process the system showing message like campaign has not started.i am not sure about weather work flows should activate for starting campaign automation.
can u please let me know how to activate work flows and what is the path to activate work flow templates for campaign automation
Thanks&regards
kishor kumar

Pls forward to me as well, facing the same problem unable to start Campaign Automation.

Similar Messages

  • ACTIVATE WORK FLOW FOR QM NOTIFICATION

    Dears
    Please tell me the step for activating work flow template for Quality notification
    If we activate it effect any other module?
    A QM consultant can be activate it or it required technical person
    Any in put will be highly appricaited
    Thanks in advance
    Faisal
    Edited by: Muhamed Faisal on Jul 21, 2011 8:00 PM

    Hi,
    For all three tasks, it is very conveniant to assign ROLE or USER itself to the task.
    But for that Purchse activity would be your new and separate task it self, for which you should new task, where you can assign the RULE for the Agent. That may make it optional as per your requriement.
    Hope it'll work for you.
    Update us to help you more, reward points to help you better!
    Regards,
    Shyamal

  • How to create a work flow template

    HI
    how to create work flow template using EP.
    I am new to this division of  EP .
    Could some please give me a head start to go with this
    some how to docs or weblogs
    thanks
    pk

    Universal Worklist Configuration
    http://help.sap.com/saphelp_nw04s/helpdata/en/0c/19dfc6febc4f888701697ef23b16cd/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how to configure the universal worklist.pdf.
    Patricio.

  • How to config work flow for approval in snp?

    Dear Expert,
    we want to running TLB for deployment stock orders which are approved by leaders.
    please tell us how to config work flow for approval in snp?
    thanks so much

    Hi,
    I got to know from DB49 that some workflow is available in GATP, but as far as I know, there is no such possibility in SNP.
    Deployment stock transfer kind of data exists in livecache order series, and it's very tough to manipulate it in some way to suit the approval workflow.
    As far as I can propose, you would need to do following (big custom development):
    1) Create a custom transaction
    2) Read Deployment Stock transfer data in accordance with your selection criteria and display it to the relevant user/approver
    3) User would accept/reject the Deployment Stock Transfer. This action is possible in a custom transaction.
    4) If Deployment Stock transfer is rejected, delete it from livecache
    5) Now when you run TLB, only approved Deployment Stock Transfer would be available to be coverted to STOs.
    In the above development, you could create logs/reports as you need for audit kind of purpose.
    This won't be a very simple development, but it's possible.
    May be someone could give you some better alternative.
    Thanks - Pawan

  • Error Activation of all work flow templates

    Dear Folks,
    Accidentally there is a big hurdle before me, I have found that all my event linkage's are active in swe2 for almost all the work flow templates. please help me how could such a situation araise with out even activating any thing from SWDD.It happened in Quality & PRD only.
    Please help ASAP unwanted work flows are generating.
    Thanks and Regards,
    Krishna Mukthineni

    HI ALL,
    The cause of issue is not yet identified however, there is a solution for deactivation / activation from DEV .
    Go to SWE2 and in the menu option we find the Transport option, copy all the line items/Records into the Request and place for importing into the desired server. Since it is a maintenance view please be care ful of changing the entries of the table manually rather please follow the method mentioned above.
    Thanks and Regards,
    Krishna Mukthineni

  • Error in work flow wait for change event

    Error in work flow wait for change event of business object bus1014, Actually this business object is triggering for two transaction one is me21n and another is c201 . am trying to create fork with two branches one is create and another if change occurs wait will trigger, bt when i trigger work flow controll is not after fork, it will stop in fork only. and am not getting my workflow container variable getting instantiate, am getting error in wait. please any one get out of me in this

    Hi Sangeetha
    What is LV_MATERIAL? is it a BO container element? or a class element or a just a simple variable?
    Error message is clear, you are trying to evaluate LV_MATERIAL but it does not contain a value.
    This is a custom workflow as it begins with WS9xxxxxxx... what is LV_MATERIAL used for? what are we expecting it to hold? maybe, from event to workflow binding we can pass the value to it.
    Please share the following:
    1) Definition screen shot of LV_MATERIAL
    2) Screen shot of The step where it is first used - from SWDD
    3) Screenshot of Event to Workflow Binding
    4) name of your base Business Object (seen in the triggering events tab of the WF template in PFTC)
    5) What is the corresponding variable for that BO in your workflow container
    6) Screen shot of WF definition from SWDD - please identify the step going in error in that screen shot
    Regards,
    Modak

  • Work flow template download error

    Hi Folks,
    I am trying to down load work flow template but its giving me this error please help me out
    " No Import Filter Was Found To Import the XML
    Document Chosen. Do You Want to Display the XML
    Document?  "
    what need to be done.
    Thanks in advance for the help
    Krishna Mukthineni

    HI folks ,
    Any help please ..
    Thanks
    Krishna Mukthineni

  • Work Flow & Procedure For Transportation Module Of SD

    Dear All,
    Currently, we have just got SD implemented. Now, we shall like to go for the Transportaion Module i.e. Order Booking, delivery and the PGI followed by Auto Invoicing. Now, we wants to go for Transportation Module  i.e. Shipment Creation, Shipment cost calculation , Service Order Creation etc. As we are quite new to this. So, we shall like to know the complete work flow & the procedure  for implementing the same. i.e. in what sequence the various transactions to be used for Master / Transaction.
    Please advise further.
    With Best Regards,
    Sanjeev Chugh

    Thanks for the reply. Definitely, i can share the details to the best of my knowledge about the transportation module.
    This module is basically meant for controlling purpose. Our main objective is to control the Transportaion Charges. Vendor Invoice must be cross verified from the sytem as well.
    Our Current Business Process : As per business process, we are having fixed rates per transporter for the type of vehicle and the source - destination combination. So, whenever, we are stock transferring the material from our mfg. plants to various depots, we are using various transporters (some one are specialised for south, some are spl. for east, so on and so forth). On the receipt of the material, receiver i.e. the destination branch , confirms the material receipt.. MIGO / MIRO etc. . We wants to capture the cost of the shipment as per the system and then on the receipt of the bill from transporter, the same must be cross verified.
    On going thru various documents from Web, I could gather the following details :
    1. After making deliveries, we have to make a shipment document. In our case, max. time it shall be an individual Shipment i.e. Tcode VT01N. Other type of shipment be Collective Shipment, which we use very less no. of times.
    2.  We have to prepare Shipment Cost document by using Tcode VI01
    3. We have to create a service Purchase Order By using ME21N.
    In our business scenario, we shall not be using legs concept as our shipments generally used to be from point to point basis.
    Sir, logically, i know our needs.. But getting stuck at a couple of points ... Like where to define various rates per transporter..That's why, i named the subject as the Work  Flow & Procedure for Tpt.Module.
    I shall like to request you to kindly advise further in this regard or kindly let me know if some study material is available from where i can comes to know about the exact work flow of the Transportation Module As Such.
    From Where I Can Get Help on Any Tcode Usage i.e How to use a Tcode and what be its basic functionality.
    With Best Regards,
    Sanjeev Chugh

  • How to see work flow log from Work flow number & work item?

    Hi SDN,
    How to see work flow log from Work flow number & work item?
    Please let me know if there is any transaction for this?
    Or there is any table which gives the details of Work items & work flow numbers?
    Regards,
    Rahul
    Edited by: Rahul Wagh on Nov 12, 2008 5:56 PM

    Hi Rahul
    Go to the Transaction SWI1,
    Enter the workitem no and press F8.
    Select the required entry and Press Shift+F8 (Log Button)
    to view the workflow log.
    Best Regards,
    Deepa Kulkarni

  • Work flow Template

    Hi Experts,
              My scenario is I need to create an Process code based on Function module and when the process code triggers it will automatically fetch the work flow template.
    So what are the import, export parameters are need to call the WF template using Process code[Function Module].
    Thanks.

    for exampe, u can use this function:
    CALL FUNCTION 'SWW_WI_START'
                  EXPORTING
          CREATOR                            = sy-uname
          PRIORITY                           = '5'
          TASK                               = 'WS74508518'
        IMPORTING
          WI_ID                              = wi_id
        TABLES
          AGENTS                             = agents
          WI_CONTAINER                       = wi_container
       EXCEPTIONS
          ID_NOT_CREATED                     = 1
          READ_FAILED                        = 2
          IMMEDIATE_START_NOT_POSSIBLE       = 3
          EXECUTION_FAILED                   = 4
          INVALID_STATUS                     = 5
          OTHERS                             = 6
    where agents is internal table with agents like SWHACTOR (otype, objid)
    and wi_container is workflow container with pairs (element, value).
    U can fill it with macroses from include <CNTN01> (swc_set_element, SWC_SET_TABLE).
    U can use function's SAP_WAPI_START_WORKFLOW , SWW_WI_START_SIMPLE too, or start the event wich start WF (function SWE_EVENT_CREATE)

  • How to create a new template for pages in iPad?

    How to create a new template for pages in iPad?

    In spite of the latest updates Pages for iPad does not support:
    1) User templates
    2) Headers
    3) Footers
    4) Page numbers
    and it is not compatible with Pages for OSX, a document cannot be edited alternatively on Mac and iPad without destroying headers and footers.
    - The Word export is far from perfect
    - Does not really support Page Layout mode (you cannot duplicate a page at least)
    - Does not have a multi-page overview
    - The spelling support of iOS and OSX is at the level of Apple Maps except 4-5 languages.
    - It takes a long time until it starts
    INSTEAD, according to the latest updates:
    - It can do change tracking
    - Lock and unlock objects
    - Add reflections to shapes
    Dear Apple, please understand:
    - We like iPad and we wish to use it for real work.
    - We wish to have user templates, headers, footers and page numbers.
    - We do not expect all the features of Pages for OSX, but we do expect real compatibility.
    - We do not wish to switch back to Word for Windows unless you force us.
    Please try to concentrate on real development not on unimportant changes like in the latest dissapointing update.

  • How to activate all inactive objects for current user

    Hi
    How to activate all inactive objects for current user ...
    ... I have found a (long winded) way to do this:
    - Environment / Inactive Objects
    - Add to Worklist
    - Display Worklist
    - Select All
    - Activate
    this will open a dialog titled "Inactive Objects for <username>"
    which has the exact functionality I need ... but I can't figure out how to get to this dialog directly - without so many intermediate steps
    the SAP docs repeatedly mention the ability to activate the inactive worklist - but do not mention how
    does anybody know the TCode for this dialog?
    thanks
    ps does the term "mass activation" apply to importing change requests rather than development activation?
    Edited by: FireBean500 on Jun 4, 2010 11:07 PM

    No other way. But usually it's far more simple as all objects are already in our own worklist.
    I wonder why your objects are not already in your worklist, as everytime you create or maintain an object, it is added to your worklist.

  • Ask your question.How do I change the template for a pages document

    How do I change the template for a pages document?

    Once you've opened it, the opened document is no longer a template. Edit it as you would any other Pages document.
    If you want to use the edited document as a Template, then , after editing, go File > Save as Template, give the new template a name, and click Save.
    The old template will remain available in the location where you found it; the new one will be in the My Templartes sectionof the Templates Chooser.
    Regards,
    Barry

  • How to calculate work in process for maintenance order

    how to calculate work in process for maintenance order i.e raw materials not used

    Hi,
    Generally, when u create PR from maintenance order, account assignment category should be F. Cost of services first settles on the order when u create service entry sheet. Further it got settled onto settlement receiver given in order.
    If you want to change the category from F to K for maintenance orders then follow the IMG menu path as given below.
    Plant Maintenance and Customer Service > Maintenance and Service Processing > Maintenance and Service Orders  >
    General Data > Define Account Assignment Cat. and Document Type for Purchase Requisitions

  • Need document on how to create write back template for 11g

    Can anybody provide documentation on how to create write back template for OBIEE 11g?
    Thanks

    Can anybody provide documentation on how to create write back template for OBIEE 11g?Yes! Oracle does. How about you start by reading it? I will give a hint, it's on the System's Administration guide.

Maybe you are looking for