How to active 2LIS_01_S262 datasource?

Hi Friends!
Im working in BI 7.0, and I need to activate the 2LIS_01_S262 datasource in R/3 side (RSA5)
but I dont see this datasource in the Business Content tree..
How can I activate this?
Thank you in advance!

Hi,
0SD_C03 is updated by 4 databasources
2LIS_01_S260: SD - Sales order
2LIS_01_S261: SD u2013 Delivery
2LIS_01_S262: SD - Billing document
2LIS_01_S263: SD
in 7.0. it is updated by
u2022 2LIS_11_VAITM Sales Order Item Data (As of 2.0B)
u2022 2LIS_12_VCITM Delivery Item Data (As of 2.0B)
u2022 2LIS_13_VDITM Billing Document Data: Items (As of 2.0B)
Use BI 7.0 datasources i.e. LO datasources.
Check here as well:
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/osd_c03-cube-212948
Thanks...
Shambhu

Similar Messages

How to active datasource

Hi expert:
After I replicate datasource in BW server, I find the status of datasource is 'modified' not 'active'. Is it supposed to be 'active' ? How to active this?
eric

hi ERic
Go to RSA1
select source system-- Right click
Go to DATA SOURCE OVERVIEW
FInd ur respective Datasource
assign Infosource and then Activate ..
Assign points if it helpss
Thanks and Regards

Error while activating BC datasources

Hi guys,
I am getting this error while activating BC datasources...it is only with my login, rest of the users can work well.
Error:
DataSource 0BP_ACTITLE_TEXT; switch to package BUPA_CENTRAL_DATA_BW is off
this happened with all DS in the BC, the problem occured because while activating initially my connection got disconnected and then this problem started.....
how do i rectify this? any help would be highly appreciated.....

make sure that the server from which ur data source gets the values are also logged on

No active writeable datasource found for user creation, check your Persiste

HI SAP Guru's
Suddenly when I am login in Portal with J2EE_ADMIN or any user , I am getting error
You are not authorized to access this application; contact your system administrator
and when I am going to create user in identity management I am getting below error
Current user has user creation permissions in the UME, but cannot create users in the back-end system (data source). The original and possibly untranslated message was: "No active writeable datasource found for user creation, check your Persistence Configuration.".
I have searched all related treads in SDN but no success
Please help.
Thanks & Regards
Vinay Patel

Dear all,
I was searching the community because I had this same error and there was no answer of how it was fixed. So I'm sending how I fixed today in a customer environment.
1. Go to portal http://<portal>/webdynpro/dispatcher/sap.com/tcsecumewdumeadmin/UmeAdminApp
- select configuration
- folder "sap system based in abap"
- do the conection test
If the test fails, log on in client 001 and change user SAPJSF:
- assign role SAP_BC_JSF_COMMUNICATION (only this one) and one profile that has permission to RFC logon
- you can change the password too
STOP/START ABAP+JAVA
Go again to the portal above and test connection again. The tests should now be OK.
2. Go to portal http://<portal>/irj
- Log on with administrator user
Now you should be able to create an user.

Activated all datasources by mistake

Hi all,
I have the following problem - while I was trying to activate in RSA5 an FI data source, by mistake (I didn't click on the Select the Subtree +/- Button) I Activated ALL datasources (around 1046) which were added in a request.
In order to solve this I compared the Development with the Production, and deleted all the Data sources which were not in Production, and also deleted all the objects from the request.
Everything seemed ok. But, now that i did the replication of Data Sources from that system, in the BI system, I encounter the following problem: no data source has "arrived", other than the ones already existing, but for the ones already there, it has added a modified version (by me).(status changed from active to modified)
How can I undo this? It does not bother me, but the next time someone does a change here, problems may occur.
Please help!!!
Thank you so much,
AD

Hi
Use the program RSDS_DATASOURCE_ACTIVATE_ALL to activate the data sources.
now goto R3 system --> RSA6 check the data source which you want are active or not.
If not activate them and replicate them into BI system.
Regards,
Venkatesh

How to find which datasource is using table JCDS?

How to find which datasource is using table JCDS?

Hi,
Please find the below link and identify whether will it meet your requirement or not ... If it meets your requirement then I can provide you more documents related to the same which we have in our project.   We were using the same for Plant Maintanance project...
For this report the required information is gathering from the different data sources from the ECC system. This report requires object status functional location attributes, Equipment attributes and some specific information apart from normal transaction data for an order.
u2022     Main feeding data sources for this report are 2LIS_17_ORDER and 2LIS_18_ORDER.
u2022     Requires the object status data (system status, number object status and un-number system status) is feeding from different DSO where the status data is staging with different data flow.
u2022     Requires the Order planned end date which is dependent on the operation planned completion date. so we are feeding this field from Operationu2019s DSO where the planned date is staging with different data flow.
u2022     Required characteristic data and attributes of the Functional location is getting from the master data .The 0FUNCT_LOC is updating by master data data sources
u2022     Required standard class of the functional location is updating from other DSO where the classification data is staging with the help of different data flow.
2LIS_17_ORDER and 2LIS_18_ORDER Data flow Details : No enhancement was done for these data sources .
Status Data Flow Details:
The status data is staged because ,this dat is required for the reports based on the Orders, Operations , Notifications, Functional Location and Equipment.
To load suitable data to different DSOs from the Status DSO we maintain the Filters for status profile and status at DTP level.
Required status change dates are deriving based on changed on date ,system status while loading from status DSO to Order DSO.
The system status ,Number object status and un- numberd object status are feeding from status DSO only.The status DSO is updating by u20180TE_OBJ_STATUS_HISTu2019.This Is based on the tables JCDS,JSTO and T000.
JCDS     MANDT     =     JSTO     MANDT
JCDS     OBJNR          =     JSTO     OBJNR
T000     MANDT     =     JCDS     MANDT
This DS has enhanced for the below two fields
1.     Order Number
2.     Operation/Activity Number
The Logic to populate the above two fileds is as below.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e4/1522bae6aa46b8802dca454e846d58/frameset.htm
regards
BVR

Is there a way of finding out how many active hours you've worked on a Premiere project?

If not, it'd be a very cool addition for Adobe to implement... so you know exactly how many hours a project is taking (and how much to charge clients etc.) Obviously we're all prone to leaving Premiere on and wandering away, so I guess it would need to be able to differentiate between active and non-active time...

Is there a way of finding out how many active hours you've worked on a Premiere project?
There are two things a client get's billed for, my time, and my computer's time. If either one of us are working on a project, the client get's billed. Even if Adobe spent (wasted?) time on adding such a feature, they'd never be able to include any time I've spent working on the project with PP closed, so this feature would have very, very, VERY limited usefulness.
The method suggested by the images is still the best way.

Error while activating a datasource

Hi All,
We have created a generic datasource. While we are activating the datasource, its throwing up a message saying: "Error in database while accessing a table." And also "Generation of conversion exit and PSA update". Please advice.
Thanks & Regards,
Sanjeev

Hi All,
There are issues still pending in our report design. Besides the above issue, we have also got another issue related to Absenteeism column.
Example:
The report needs to show the absenteeism column on a monthly basis. If an employee goes on a unscheduled leave for 10 days which are scattered in two months (Ex: he takes leave from 28th April till 7th May), then if the report is executed for April, for that Employee, it should show only 3 days, i.e. 28th, 29th & 30th. The remaining days have to be displayed in the Absenteeism column of May report, i.e 1st, 2nd...till 7th.
There is one record whenever an employee goes on an unscheduled Leave.
Emp ID             From Date            To Date                        No of Days
111         28/04/2011          07/05/2011         10
Hence this record has to be split into two, based on the no. of days the employee has gone on an unscheduled leave in both the months like below.
April
Emp ID             From Date            To Date                        No of Days
111         28/04/2011          30/04/2011         3
May
Emp ID             From Date            To Date                        No of Days
111         01/05/2011          07/05/2011         7
Any inputs are most welcome.
Regards,
Sanjeev.

Error while activating the datasource during migration

Hi Guys,
When we were trying to migrate the datasources from 3.x to BI 7.0, we are encountering an error with the activation of the datasource. The datasource itself has been migrated but the ativation log gives and error
Error in activating the datasourc----RSO404
Has anyone encountered this issue? Your input is highly appreciated.
Regards,
Doniv

Voodi,
Thanks for the response but the note talks about deletion of the DTP causing the errors. Moreover we are already on SP 13. Any other ideas?
Doniv

ERROR WHILE ACTIVATING THE DATASOURCE

Hi Experts,
I'M WORKING ON BW3.0B.I'M GETTING ERROR WHILE ACTIVATING THE DATASOURCE
1. EVENT WITH ERRORS EXTRACT IN DATA SOURC 2LIS_11_VAHDR

Hi,
where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
Thanks
Reddy

2LIS_04_P_MATNR - Prob in activating the Datasource in R/3

Hello,
I am trying to activate datasource 2LIS_04_P_MATNR in r/3 in Tcode : rsa6/rsa5 and I am getting a warning that says
The even-numbered length of the DEC field I_DLZ_EX can lead to problems
I serached and found that note : 641744 is applicable.
The solution in the note says that there are 3 options to rectify this error as below:
If the field is not manipulated in the customer exit or elsewhere, no processing is required.
If you change the field, the following possible solutions are available:
You can make sure that the number of the characters does not increase after the manipulation.
If you can change the extract structure of the DataSource without affecting other scenarios (for example, if it was generated in transaction RSO2), you can increase the length of the DEC field (or CURR, QUAN) there to the next odd character (in the example above: from DEC 4 on DEC 5).
If neither of these solutions are possible, you can use a customer append that contains a relevant DEC field (or CURR, QUAN) with the next highest odd length. This can be used for the result of the calculations. This means that you do not have to manipulate the previous field.
I am opting the 3rd option i.e. to use an append structure with a field QUAN(in my case) that has next highest odd length
I am using the field BDMNG(length 13) from table RESB. The feild mentioned in the warning have length 12.
The problem is still occuring.
Am I able to understand the note correctly or am I missing something?
Can anyone help here?

Thanks Deva. I ignored the warning and went ahead with the enhancement.
After the activation of datasource I deleted and filled the setup tables, but the NPRT log showed 0 records.
Then after reading few threads at SCN I came to a conculsion that my setup table is refering to view CAUFV which does not contain data for order category AUTYP 10(PP Production Order) and therefore the data extracted is 0.
There was a thread mentioning the same problem that said (steps to fill the setup tables for 2LIS_04_PECOMP(Repetitive manufacturing Component view)) that the solution was to run OLIFBW Tcode after completing OLI4BW setup. So i did the same. But still my NPRT log still shows 0 records.
Also I checked AUFK table. It does not contain any data for AUTYP 10.
Please advise what should be the correct way to solve this.

Gwtting error while activation of datasource

Hi
i am using demo version . while activating my datasource ( flat file and , r/3 datasources)
i am getting this error. please let me know this error will be system related or we can solve our self also
function module SDF/AL_MAP_TRANSID_LOGH DOENT NOT EXIST
please let me know solution

Implement note 1114719. Not sure though, whether this also fixes your other issues mentioned

Regarding Activation of Datasource error

We have replicated datasource from R3 source system and while trying to activate it was posting error
of while activation of transfer structure with conversion exits., We are using 7.0 datasource only.
We checked at RSA3 of datasource and data is coming successfully., we tried with program transferstruc activate program
and rsds-datsource program but couldnt able to get rid of error.
Can you please help me to resolve the issue of what to be done for activation of

error while activation of datsource: Generation of conversion exits and PSA update...
                                                           Error when creating transfer structure /BIC/CCGNZP31_MM01_DS in source system Z370_110
                                                             Error when activating DataSource ZP31_MM01_DS                  Z370_110
                           These are the above errors mentioned while activating the datasource in 7.0.

How to handle multiple datasources in a web application?

I have a J2EE Web application with Servlets and Java ServerPages. Beside this I have a in-house developed API for certain services built using Hibernate and Spring with POJO's and some EJB.
There are 8 databases which will be used by the web application. I have heard that multiple datasources with Spring is hard to design around. Considering that I have no choice not to use Spring or Hibernate as the API's are using it.
Anyone have a good design spesification for how to handle multiple datasources. The datasource(database) will be chosen by the user in the web application.

Let me get this straight. You have a web application that uses spring framework and hibernate to access the database. You want the user to be able to select the database that he wants to access using spring and hibernate.
Hopefully you are using the Spring Framework Hibernate DAO. I know you can have more that one spring application context. You can then trying to load a seperate spring application context for each database. Each application context would have it's own configuration files with the connection parameters for each datasource. You could still use JNDi entries in the web.xml for each datasource.
Then you would need a service locater so that when a user selected a datasource he would get the application context for that datasource which he would use for the rest of his session.
I think it is doable. It means a long load time. And you'll need to keep the application contexts as small as possible to conserve resources.

How to create a datasource for 0COSTCENTER to load data in csv file in BI

how to create a datasource for 0COSTCENTER to load data in csv file in BI 7.0 system
can you emil me the picture of the step about how to loaded individual values of the hierarchy using CSV file
thank you very much
my emil is <Removed>
allen

Step 1: Load Required Master Data for 0CostCenter in to BI system
Step 2: Enable Characteristics to support Hierarchy for this 0Cost Center and specify the External Characteristic(In the Lowest Node or Last Node) while creation of this Characteristic InfoObject
Step 3: On Last Node of Hierarchy Structure in the InfoObject, Right Click and then Create Hierarchy MANUALLY by Inserting the Master Data Value as BI dosent Support the Hierarchy load directly you need to do it manually....
Step 4: Mapping
Create Text Node thats the first node (Root Node)
Insert Characteristic Nodes
Insert the Last Node of the Hierarchy
Then you need to create a Open hub Destination for extracting data into the .csv file...
Step1 : Create the Open Hub Destination give the Master Data table name and enter all the fields required....and create the transformations for this Open Hub connecting to the External file or excel file source...then give the location on to your local disk or path of the server in the first tab and request for the data...It should work alright let me know if you need anything else...
Thanks,
Sandhya

How to active 2LIS_01_S262 datasource?

Similar Messages

Maybe you are looking for