How to : Active/Passive and Active/Active Enterprise manager R3 (10.2.0.3)

Soon I will implement the above named version of EMR3 on a AIX 5.3.3 platform. I have a couple of questions about active/passive and active/active implementations. These are the questions I have:
Basic install:
Implementing 10.2.0.2 and upgrading to 10.2.0.3 works fine on host 1234 (already done that).
Does anyone have experience with an implementation on host 1234', in other words, a virtual host (different IP-numbers on the same ethernet adapter)?
Active/passive
Lets assume that the implementation on server 1234' works fine, how can I realise a cold failover situation? On AIX you can move/transport the volume group to the failover server, activate the volume group, mount your filesystems and the application is running again. This is the theory but ....
Active/Active
If this 'basic' install is done, can someone briefly tell me how to migrate the OMS repository to a RAC implementation? Is this possible or do I need to setup the repository for the OMS at the start of the implementation. Has anyone experience with using virtual hostnames, RAC and EMR3.
Can anyone tell me where I can find some good documentation instead of reading all these thousands of pages of Oracle's guides.
Help would be appreciated.
Message was edited by:
Jeroen Udo

Similar Messages

Difference between Direct activity allocation and internal activity allocat

Hello
I am pursuing SAP Management Accounting certification
Can somebody tell me what's the difference between direct activity allocation and internal activity allocation. Please give some example and also specifications as to cost element categorry, activity type, etc.
Asif
Moderator: Please, do not post certification queries. Regarding your issue, please, refer to help.sap.com

Hi,
Activity means e.g.. sales call, customer visit etc.
But service process means after you sale your product if some service related issue arrives then that is taken care by this transaction.
Inspire by rewarding.
Regards,
Nikhil

How to search the indexes in 11g Enterprise Manager Console

Hi,
After setting the Indexes using Java Embedding for a process, can you please tell me how to search the indexes in 11g Enterprise Manager Console for the particular process.In 10g BPEL Console we have the option of searching the Instances based on Indexes we already set at process level which is inbuilt in 10g. I need the same in 11g .
Thanks,
Sagar.

Hi Sagar,
You can define composite sensors in your composite.
Then you will get fields in enterprise manager of that composite instance.(the sensors you have defined will be displayed here)
You can enter the values based on what you want to search the instance. :)
Regards
PavanKumar.M

How to join ce_200_transactions_v and ce_statement_lines in Cash Management?

Hi all ,
how to join ce_200_transactions_v and ce_statement_lines in Cash Management?
Please suggest.

Did you check eTRM website? -- http://etrm.oracle.com/
Thanks,
Hussein

How to create a new database using Enterprise manager?

hi all,
thank you for all your support. i want to create a new database . I tried following these steps
i am using Oracle 9i and windows XP
1, opened the enterprise manager by clicking from programs
2,selected launch standalone Application
3, from the tree i expanded the network node and expanded the databases node ,now i can see the globaldatabase i created during installation . i can login that database using systems and manager (username & password )
4, clicked the new database icon from the window , a small window with node named database appeared
5 , I tried to expand that by clicking on the database node ,but it pops up a new window showing no active session selected
I would be grateful if anyone can suggest a solution for this
thanks & regards

Hi,
How can i access DBCA
start ---> run ---> DBCA <<hit enter>>
or
start ---> program ---> oracle home ---> configuration tools ---> database configuration assistant.Regards
Mohammed Taj
http://dbataj.blogspot.com

How to use multiple databases in oracle10g enterprise manager

i have two databaases in my system
when i opened my enterprise manager
its always displayed to log in the already created database
but it does not display the just created db .
Pls give me solution for that its urgent

nitesh piyaranjan wrote:
i have two databaases in my system
when i opened my enterprise manager
its always displayed to log in the already created database
but it does not display the just created db .
Pls give me solution for that its urgentWith the same thoughts on "urgent", if your issue is to have another db being used with the EM, you must have noticed in the url in your browser, a port number is shown. Like this one,
http://localhost:1158/emHere it is 1158. For the 2nd db, there would be another port number assigned. All you have to do is to use the correct port number and you would eb able to use the 2nd db with EM. All the port numbers are in teh files, portlist.ini which will be under Oracle_home/install folder.
HTH
Aman....

Copy and paste on Enterprise Manager running on Xwindows

Dear All
It might be a simpe question if known the answer.
Is it possible to do the "copy" and "paste" of
selected text on Enterprise Manager running on Xwindows? For example, Is it possible to copy a view or procedure code shown on Enterprise Manager and paste it onto another window? I used to run OEM on PCs and could do so
by using Ctrl+C and Ctrl+v; but couldn't do the same on OEM running on Solaris using xterm: Hummingbird (Vista eXceed).
Regards,
Zhuang

Hi princess,
Check the Edit menu, where you'll find Cut, Copy and Paste, as well as variations of Paste in some applications. Where there is a keystroke combination to do the same thing, you will find it listed in the menu beside the menu command, Here's my Edit menu in Pages:
Yours will be missing the starred key stroke set by Paste and Match Style. This is a custom one, taking advantage of OS X permitting the creating of keystroke combinations for top level menu items without one assigned.
One handy set to memorize is the Z X C V series. With the command key, these are Oops!, Cut, Copy and Paste.
If you've used keyboard shortcuts in Windows, you will find that many of the Mac ones are the same, but use the command key where MS uses the control (ctrl) key.
Regards,
Barry
PS: A minor rewording on Niels instructions for using the modifier keys. When I gave instructions essentially the same as his to my grade four and five students, I found many of them stabbed at the two (or more) keys, trying to press both at exactly the same time, an almost impossible task. When I revised the instructions to those below, most of the errors disappeared.
command-C: This means 'press and hold the command key, tap and release the C key, then release the command key.
shift-command-A: Press and hold the shift and command keys, tap and release the A key, then release the two modifier keys.
In general: Press the modifier keys (shift, command, option, control—whichever is called for—in any order, holding it/them down, then press/tap the action key (usually a letter), then release the action key, then release the modifier keys.
B

How to setup or review the Oracle Enterprise Manager in 11GR2 under OEL5.4

The Enterprise Manager is running very slowly, it fails to attempt to connect to the database by time out, and after starting the database and listener these are not accessible externally from another host.
Thank...
Edited by: Elix545 on Feb 2, 2010 10:03 PM

We have at least two ways to address your problem:
Stored Outlines (no extra charge, freeze execution plan for a particular statement)
SQL Plan Baselines (additional license, allow only execution plans that you like for particular statements, make it possible to compute new execution plans that can be evolved, should they prove to be even better than the old ones)
I recommend that you investigate a little with the two keywords above to get a more detailed overview.
Kind regards
Uwe
http://uhesse.wordpress.com
Addition: Since you are on 9i, you cannot use SQL Plan Baselines - they are a new feature of 11g
Edited by: Uwe Hesse on 11.02.2010 09:28

Config Listener and access to Enterprise Manager

Hello,
I just installed Oracle 11g R2 on Windonws 7 64bit and I created a database. When I try to create a listener I get the following message on the console:
ServiceAliasException: Could not initialize Service Alias: TNS - 044
12: Problem reading or entering an address.
Caused by: oracle.net.config.SOExceptionConfig: TNS-04413: found a shared object in the secundary tree.
Can I access to Oracle Enterprise Manager without having configured a listener?
thank u in advance

set all path properly....
In the C:\oracle\product\10.2.0\db_1\network\ADMIN directory, rename the listener.ora, sqlnet.ora and tnsnames.ora to listener.ora.bak, sqlnet.ora.bak and tnsnames.ora.bak.
Then rerun netca (Net Configuration Assistant) to recreate the sqlnet.ora (second option on the menu), listener.ora (first option) and tnsnames.ora (third option).
After exiting netca, start the listener by issuing the command ‘lsnrctl start’.
Best Regrades,
Shishir Tekade
Edited by: user8244528 on Nov 27, 2012 4:33 AM

How to replace self-signed certificate for enterprise manager console

Does anyone know how to change self-signed certificate for https access to Enterprise Manager console, which is issued during installation of Oracle 11g?

Well, this might not be much help, but for 10g, on AIX, docID 1171558.1 describes how to create a new certificate.
Not sure how relevant it will be for 11g, sorry :(

How do I locate and install Activity Monitor?

I cannot find Activity Monitor on my computer.
When and how it disappeared I do not know, but is there anyway of locating and installing a copy without a complete re-install?

"Activity Monitor" is stored on the Utilities folder, inside the Applications folder. Before reinstalling OS X, I recommend you to search it with Spotlight.
To search it in Spotlight, press Command and Space keys so, if you have a look at the top right of the display, Spotlight will appear. Then, type "Activity Monitor" without quotes, and check if the application appears. If it appears, it hasn't disappeared because you can use it. If it doesn't appear, you have to reinstall Mac OS X. Insert the Mac OS X disc, hold the C key while your computer is starting, and reinstall Mac OS X. You won't lose anything from your computer

SAP cluster active/active Windows and cluster active/pasive Database

Dear Experts,
I need to know if SAP is restricted to work in an active / active cluster Windows R2 and database cluster with passive / active. Maybe Oracle database.
Maybe they can give me some information on how to do it or tell me if this combination is NOT possible. Maybe Oracle as database.
Please any information you can give me I thank.

Hi Kumar,
Please gothru the Installation guides under http://service.sap/com/instguides for required SAP DVD's and PAM for compatible DB's.
In Node A --> You start with ASCS + SCS installation as below
1.) Central Services Instance for ABAP (ASCS) -- Consists of Msg. service & Enqueue Service (Shared Disk)
2.) Central Services Instance (SCS) -- Consists of Msg. service & Enqueue Service (Should be installed after installation of 1.) (Same Shared Disk)
3.) First Microsoft Cluster Service (MSCS) -- This step creates the SAP cluster group on the first MSCS node and adds the ASCS and SCS instance(s) to the SAP cluster group
4.) Database Instance
Node B
5.) Additional Microsoft Cluster Service (MSCS)
6.) Enqueue Replication Server BOTH NODES, First in NODE A followed by NODE B
7.) Central Instance NODE A-- If you install the central instance on one of the NODE A, make sure that you use a local drive, not a shared drive.
8.) Dialog Instance NODE B-- Same procedure as in NODE A.
When NODE A fails, the ASCS and SCS failsover to NODE B and Dialog instance on NODE B act as CI.
Refer to below doc for more information - http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00004f25-6190-2b10-2c8b-fa419234c28b
http://scn.sap.com/docs/DOC-25454
Thanks,
Arjun

DB link is not active if gives SID through enterprise manager(JAVA)

Dear All,
I have a strange issue in one of our DBLINK.
DBLINK is unsuccessful though we are using the same SID in OEM that we configured at Linux box.
If i give the full path of this entry, then this link will be active.
if i am giving only that SID, then the link will be inactive.
any clue on this..?

user4226718 wrote:
Dear All,
I have a strange issue in one of our DBLINK.
DBLINK is unsuccessful though we are using the same SID in OEM that we configured at Linux box.
If i give the full path of this entry, then this link will be active.
if i am giving only that SID, then the link will be inactive.
any clue on this..?You have a mystery & we have no clue.
Good Luck solving this mystery.

How to monitor java memory usage in enterprise manager

I am running sqlplus to execute a sql package, which generates XML.
When processing 2000+ rows, it will give a out of memory error.
Where in enterprise manger can I see this memory usage?
Thanks.

Hello,
it depends a little on what you want to do. If you use the pure CCMS monitoring with the table ALTRAMONI you get average response time per instance and you only get new measurements once the status changes from green to yellow or red.
In order to get continuous measurements you should look into Business Process Monitoring and the different documentations under https://service.sap.com/bpm --> Media Libary --> Technical Information. E.g. the PDF Setup Guide for Application Monitoring describes this "newer" dialog performance monitor. Probably you have to click on the calendar sheet in the Media Libary to also see older documents as well. As the Business Process Monitoring integrates with BW (there is also a BI Setup Guide in the Media LIbrary) you can get trendlines there. This BW integration also integrates back with SL Reporting.
Some guidance for SL Reporting is probably given under https://service.sap.com/rkt-solman but I am not 100% sure.
Best Regards
Volker

How to configure rz20 and dswp in solution manager ?

Hi all,
I have configured the ccms agent and ccms ping in the satellite system and all the connectivity with solution manager.
but then i haven' got the idea how to configure the template in the RZ20 and DSWP ?
Please advise on document / blog etc regarding this kind of configuration ?
Thank you and Best Regards
Fernand

Hi
check below link:
DSWP: http://help.sap.com/saphelp_smehp1/helpdata/en/8e/3ad6f807e147669036d2a6aed597aa/content.htm
RZ20: http://help.sap.com/saphelp_nw04/Helpdata/EN/17/550c404a435509e10000000a1550b0/content.htm
Thanks
Sunny

How to : Active/Passive and Active/Active Enterprise manager R3 (10.2.0.3)

Similar Messages

Maybe you are looking for