How To Active/Passive Mode for FTP Adapter?

Hi there,
For one of our adapters we need to communicate with a FTP server which only accepts FTP connections in active mode. It seems that Xi uses by default the FTP passive mode.
The question is; is it possible to switch to the active mode? and How to do that?
Any feedback is appreciated.
Rob.

Hi Robert,
Did you get through this problem?
Looks like we are also facing a similar issue and want to find out if it is possible to switch to active mode?
Regards,
Prasad

Similar Messages

How to use Wallets for FTP Adapter

Hi,
Can someone point to a document that shows how we can make use of wallets for FTP Adapter.
Thanks

Hi,
When you configure the Connection Factory for FTP Adapter in Admin Console, provide the following values for the attributes like the hostname, username, password, port and the path of remote location as where
you want to write the file in remote Server i.e., ftpAbsolutePathBegin. Please fill this
attribute with the path like /soa/ftp/file (example path). If you are writing to a remote FTP server you need to create a Connection factory for that as above.
Please try this and let me know...
Thanks,
N

How to have Secure Connection for File Adapter.Pls help

Hi All,
For File to File Scenario
How to have Secure Connection for File Adapter.
Pls send links/blogs explaining this scenario.
Regards

hi rich
go through these links
FTPs connection failed - error ".. certificate rejected by ChainVerifier"
Re: What is SFTP, FTI channels
http://help.sap.com/saphelp_erp2005/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm
FTPS implementation question.
http://help.sap.com/saphelp_nw04s/helpdata/en/43/0e16bfd7b021aee10000000a1553f6/frameset.htm
Server certificate rejected by ChainVerifier:FTPS server(Points Guaranteed)
/people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi
File adapter
thanks
Kunaal

Oracle 10g Database Installation In Active-Passive Mode.

Good Afternoon !!!!
We are installing Oracle 10g in Active-Passive Mode on HP UX-11.3 , with ASM. Can someone help me with step wise installation procedure for the same.
Many Thank's
Rajeev.

Check on the release notes for your platform
This is for x86-64 Linux.. read it all, then you'll find the "6 Documentation Corrections and Additions" section you'll find the RPMs that you need
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15666/toc.htm
then go to the official doc installation of 10gR2 on x86-64 Linux
http://download.oracle.com/docs/cd/B19306_01/install.102/b15667/toc.htm
Yum is a package management tool. This is what you'll be using to install the RPMs. But first you'll have to setup the Yum repository, usually what I do is stage the DVD media on the server then make it as a repository. If ever there's a specific (higher) version that I need then I just pull it on the RedHat Network.
There are a lot of HOWTOs about Yum. You may read on this link http://docs.fedoraproject.org/yum/en/
- Karl Arao
http://karlarao.wordpress.com/

FINEST debug logs for ftp adapter

Hi All,
How do I turn on the FINEST debug level for ftp adapter in SOA application.
Thanks

Not sure you can do it just for file but
login to EM and navigate to SOA -> soa_infra
right-click on soa_infra and select logs -> log configuration
expand oracle.soa
you will see
oracle.soa.adapter
set this to the level you desire
cheers
James

How to set Compatibility Mode for a single site in ie10

This question was originally posted on the Answers forum -
http://answers.microsoft.com/en-us/ie/forum/ie10-windows_7/how-to-set-compatibility-mode-for-a-single-site-in/187152e3-142a-4d96-8d1b-af82ef571eec
I am having problem with getting ie10 to set ie9 compatibility for a single site (sharepoint.contoso.com).
When I add this website in Compatibility View Settings (Alt > Tools > Compatibility View Settings > 'Add this Website') it adds the domain 'contoso.com' and not the individual website (sharepoint.contoso.com).
This cause other sites (www.contoso.com) to be configured to use compatibility mode. Because this is a separate site (different web server) to the site sharepoint.contoso.com (sharepoint 2010 server) we need different compatibility settings.
Using a different example to explain the issue -
Microsoft has three websites that are different websites created by different developers written in different programming languages and they only work with certain browsers.
microsoft.com (Website1 created by Developer1) - compatible with ie8/ie9/ie10
msdn.microsoft.com (Website2 created by Developer2) - compatible with ie8/ie9
technet.microsoft.com (Website3 website created by Developer3) - compatible only with ie10
The only thing the three website share is the URL contains 'microsoft.com'.
Marking 'msdn.microsoft.com' to run in compatibility mode affects the other 2 websites - mainly technet.microsoft.com which will not work now since it only runs in pure ie10 mode.
Should you be able to add an individual site to the compatibility list instead of all sites that have .microsoft.com in the URL? Am I missing a simple setting in the ie10?
As a workaround I am using the F12 Developer Tools to set the Browser Mode which temporary sets the compatibility mode. However this is not a nice solution to the end users at our organisation.

problem is not solved for non corporate environments...
You could start your own thread. Then if you got that answer and it was marked Answered you would have the ability to unmark it. The OP of this one seems satisfied. Also note that this is TechNet. Consumers can get help on Answers
forums.
Robert Aldwinckle
Oh! I wrote it wrong: I should have said: This is not solved for NON-AD environments. No demands what so ever to use Window 7/8 professional in a small corporation or on a big corporation with Island of smaller departments for example offshore.
The problem is that the thread is not "Answered" by the OP, its is marked answered by a moderator (and same moderator that did the answer) so no way of telling if the OP is satisfied.
But you are right in the fact that I am almost kidnapping the thread. But a complete answer would benefit all in this case I would presume.
Regards
/Aldus

How to set Update Mode for DSO in BI7.0?

Hi,
As you know in bw3.5, in update rules we can set the update mode for ods as Additive or overwrite functionality.
But can anybody tell me where are these settings in bi7.0? or
How to set Update Mode for DSO in BI7.0?
Thanks and Regrards,
Harshal

Dear Harshal,
GO to the tramsformations of your DSO..
In the Rule Group..Click on any key Figure..
this pops u a window..in which u will find AGGREGATION ..Then u can select Either OVERWRITe or SUMMATION which suites ur requirement..
Hope this helps u..
Assign points if helpful..
Best Regards,
VVenkat..

CharacterSet Property for FTP adapter in SOA 10.1.3.5

Hi All,
I am facing an issue while setting a jca property for FTP adapter. The property I am setting is to sync Read files of UTF-8 type of characterSet. Hence in jca properties I am setting the following value:
<jca:operation
FileType="ascii"
CharacterSet="UTF-8"
LogicalDirectory="directory"
InteractionSpec="oracle.tip.adapter.ftp.outbound.FTPReadInteractionSpec"
LogicalArchiveDirectory="FileArchiveDirectory"
DeleteFile="true"
FileName="fileName"
OpaqueSchema="true"
UseRemoteArchive="true">
I want this changes to be done since the FTP adapter is not able to read files with the file name having special characters of type UTF-8.
When I execute this I am getting the following error:
[ SynchRead_ptt::SynchRead(Empty,opaque) ] - WSIF JCA Execute of operation 'SynchRead' failed due to: Could not instantiate InteractionSpec oracle.tip.adapter.ftp.outbound.FTPReadInteractionSpec due to: Error while setting JCA WSDL Property.
Property setCharacterSet is not defined for oracle.tip.adapter.ftp.outbound.FTPReadInteractionSpec
Please verify the spelling of the property.
I am trying this in SOA 10.1.3.5. can you please provide me a solution for this issue.

Hi,
I am facing the same scenario.
FTP adapter is picking file as opq and sending as email attachment.But the adapter not able to resolve special characters like Á....In the received payload of the adapter Á is replaced by ?......
Can anyone please help me out or suggest a work around.Thanks in advance..
Thanks & Regards,
Subho

Difference between passive and active data connection mode for FTP

Hi,
Does any body have the idea of passive and active data connection mode for the transport protocol FTP.
I have one server with FTP, I have to pick the data from this FTP to XI.
What is the difference between active and passive data connection? Does XI supports both the connections?
Thanks & Regards
Katta Mohan Reddy

Hi
According to SAP Note - 821267
Q: Does the File Adapter support active data connections when connecting to an FTP server?
A: Up to and including SP14, the File Adapter exclusively uses passive data connections. Starting with SP15, active connections will be available.
Difference between active and passive,
You can definitely refer to the site mentioned by Suraj
cheers
Sameer

Any way to set "active mode" for FTP, or to use sFTP instead?

I have a web host that does not support passive FTP mode. I need to either set the mode to be "active mode", or I need to use secure FTP (sFTP). Is there any support for either of these within Muse?

Hi
By default , Adobe Muse FTP option uses " Passive Mode" , I am afraid its not possible to switch to "Active Mode" or to switch to Secure FTP. Alternatively, you may export the site locally using " Export as HTML " and then you may use third party FTP client to upload the site to your third party hosting using Active or Secure FTP.
Let me know if you have any further query.

What is the max file limit for FTP adapter that uses FileIoInteractionSpec

Hi,
I know that Oracle provided some new features in 10.1.3.4 using which we can use the file and ftp adapter to move files in a more efficient way
http://download.oracle.com/docs/cd/E12524_01/relnotes.1013/e12523/adapters.htm#CHDGFAAB
Essentially it involves modifying the WSDL to use the new InteractionSpec="oracle.tip.adapter.file.outbound.FileIoInteractionSpec"
Now my question is, what is the file size limit which can be transferred using this.
I have tried with 20 mb file, it works. But I want to know the upper limit.
Thanks,
Amit

Tried with 31 mb file.
It successfully delivers the file but....
The instance never completes successfully in the BPEL Console. If I open the audit tab, it shows the following message
There is a system exception while performing the BPEL instance, the reason is "JTA transaction is not present or the transaction is not in active state. The current JTA transaction is not present or it is not in active state when processing activity or instance "7,200,001". The reason is The execution of this instance "7200001" for process "TestFTPLimit" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information.. Please consult your administrator regarding this error. ". Please check the error log file for more infromation. Please try to use bpel fault handlers to catch the faults in your bpel process. If this is a system exception, please report this to your system administrator. Administrator could perform manual recovery of the instance from last non-idempotent activity or dehydration point.less
ORABPEL-02182
JTA transaction is not present or the transaction is not in active state.
The current JTA transaction is not present or it is not in active state when processing activity or instance "7,200,001". The reason is The execution of this instance "7200001" for process "TestFTPLimit" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information..
Please consult your administrator regarding this error.
at com.collaxa.cube.engine.CubeEngine.store(CubeEngine.java:5514)
So does anybody know how to get over this.
I understand that sync read is a sync operation, so obviously it was going to timeout, as this transfer took around 4 minutes for me. But then, isnt this a bug from Oracle's side

How to : Active/Passive and Active/Active Enterprise manager R3 (10.2.0.3)

Soon I will implement the above named version of EMR3 on a AIX 5.3.3 platform. I have a couple of questions about active/passive and active/active implementations. These are the questions I have:
Basic install:
Implementing 10.2.0.2 and upgrading to 10.2.0.3 works fine on host 1234 (already done that).
Does anyone have experience with an implementation on host 1234', in other words, a virtual host (different IP-numbers on the same ethernet adapter)?
Active/passive
Lets assume that the implementation on server 1234' works fine, how can I realise a cold failover situation? On AIX you can move/transport the volume group to the failover server, activate the volume group, mount your filesystems and the application is running again. This is the theory but ....
Active/Active
If this 'basic' install is done, can someone briefly tell me how to migrate the OMS repository to a RAC implementation? Is this possible or do I need to setup the repository for the OMS at the start of the implementation. Has anyone experience with using virtual hostnames, RAC and EMR3.
Can anyone tell me where I can find some good documentation instead of reading all these thousands of pages of Oracle's guides.
Help would be appreciated.
Message was edited by:
Jeroen Udo

Soon I will implement the above named version of EMR3 on a AIX 5.3.3 platform. I have a couple of questions about active/passive and active/active implementations. These are the questions I have:
Basic install:
Implementing 10.2.0.2 and upgrading to 10.2.0.3 works fine on host 1234 (already done that).
Does anyone have experience with an implementation on host 1234', in other words, a virtual host (different IP-numbers on the same ethernet adapter)?
Active/passive
Lets assume that the implementation on server 1234' works fine, how can I realise a cold failover situation? On AIX you can move/transport the volume group to the failover server, activate the volume group, mount your filesystems and the application is running again. This is the theory but ....
Active/Active
If this 'basic' install is done, can someone briefly tell me how to migrate the OMS repository to a RAC implementation? Is this possible or do I need to setup the repository for the OMS at the start of the implementation. Has anyone experience with using virtual hostnames, RAC and EMR3.
Can anyone tell me where I can find some good documentation instead of reading all these thousands of pages of Oracle's guides.
Help would be appreciated.
Message was edited by:
Jeroen Udo

Configuration for ftp adapter in soa11g

hi,
I am new in soa11g,can anyone help me for how to configure ftp adapter in console, to use ftp adapter.
thanx and regards
prashant
Edited by: 857480 on 10-May-2011 02:55

thanxs,
but now i am getting exception like
BINDING.JCA-12563 Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Put' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. ftpDemo:put [ Put_ptt::Put(body) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/Ftp/PrashantFtp'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/Ftp/PrashantFtp. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server Please make sure that the JCA connection factory and any dependent connection factories have been configured with a sufficient limit for max connections. Please also make sure that the physical connection to the backend EIS is available and the backend itself is accepting connections. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
plz help.
regards
prashant

High Availability - Active Passive setup for EBS Database

Hello Gurus,
We have the below environment:
Oracle Applications - 12.1.3
Oracle Database - 11.2.0.3
OS - Oracle Enterprise Linux 5.7
I would like to know how to achieve high availability (*Active/Passive*) for the database. We don't want to go with RAC at this stage. Can you please guide on a specific note id which explains how to setup an active passive database environment for HA.
Thanks.

Hi;
We have the below environment:
Oracle Applications - 12.1.3
Oracle Database - 11.2.0.3
OS - Oracle Enterprise Linux 5.7
I would like to know how to achieve high availability (*Active/Passive*) for the database. We don't want to go with RAC at this stage. Can you please guide on a specific note id which explains how to setup an active passive database environment for HA.You can go with Dataguard. Please review:
Business Continuity for Oracle E-Business Release 12 Using Oracle 11g Physical Standby Database [ID 1070033.1]
Also see:
MAA Roadmap for the E-Business Suite [ID 403347.1]
Regard
Helios

OSB error while generating business service for FTP adapter Sync Get File

Hi All
I am trying to generate a business service from SOA Suite JCA FTP adapter Sync Get File, but i am getting this exception for no reasons (Rest operations list file, get file and put file are working)
Invalid JCA transport endpoint configuration, exception: java.lang.NullPointerException     Unknown ALSB Conflict.
Is this a bug in eclipse, can any body help me. Thanks
Sorry Forgot to mention eclipse version...
Eclipse Platform
Version: 3.6.2
Build id: M20110210-1200

Ok,
bcoz of this issue, i had to code the entire interface in OSB console. It runs fine in OSB console (i was able to test it successfully).
Is this a bug in eclipse or only i am facing this issue? Has anybody tried to create a business service from JCA FTP Get Synchronous jca file?
<adapter-config name="FTPReadMOMFileOnRMSDB" adapter="FTP Adapter"
     wsdlLocation="../wsdl/FTPReadMOMFileOnRMSDB.wsdl"
     xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
     <connection-factory location="eis/ftp/RMSDBFtpAdapter" />
     <endpoint-interaction portType="SynchRead_ptt"
          operation="SynchRead">
          <interaction-spec
               className="oracle.tip.adapter.ftp.outbound.FTPReadInteractionSpec">
               <property name="DeleteFile" value="true" />
               <property name="PhysicalDirectory" value="/MOMFiles/output" />
               <property name="FileName" value="*" />
               <property name="FileType" value="binary" />
          </interaction-spec>
     </endpoint-interaction>
</adapter-config>
One more doubt? The PhysicalArchiveDirectory path can be on the FTP server something like: /MOMFiles/archive. Or do i have to use the Put operation to move it to /MOMFiles/archive directory. Currently OSB console and eclipse do not accept FTP path for this parameter and want me to specify a local directory on server. Thanks

How To Active/Passive Mode for FTP Adapter?

Similar Messages

Maybe you are looking for