How to add 900 to the CLI of incoming international calls where suppliers sends in "+"
Hello,
I am trying to modify the displayed CLI on my phones for international calls from the SIP provider we are using, they are sending international calls CLI in the format sip:[email protected], I'd like to replace the "+" with "900" to allow callback from the missed call directory. I don't believe I can match on the "+" using translation patterns on the router.
I am running a 2900ISR as the gateway and a CM 9.5 platform.
Thanks
Hi,
This is what I normally do on ISDN :-
voice translation-rule 100
rule 1 /^/ /900/ type international international
rule 2 /^/ /9/ type national national
rule 3 /^/ /9/ type unknown unknown
But this being a SIP I am trying :-
voice translation-rule 100
rule 1 /^/ /9/ for in country CLI's
and some rule that swaps "+" for 900, but I was under the impression + is a special character that does not match on a translation pattern ?
Similar Messages
-
I need to update the subject in the mail while choosing option i.e. "Send a copy of the entire PDF file as an attachment"?
How I can add my own subject in the mail while attaching pdf file, currently it shows as "do" subject name which is default every time?the normal FILE FTP adapter will do or do we have to use any special Adapter
File adapter with a bit of modification will do. See this
XI: Read data from PDF file in Sender Adapter
Once ur pdf is converted to xml, u can use the java or xsl mapping to map the comlpete xml structure into one field
The specified item was not found.
Regards,
Prateek -
How to add spaces at the end of record
Hi Friends,
i am creating a file which contains more than 100 records.
In ABAP i have internal table with on field(135) type c.
some time record have length 120, somtime 130 its vary on each record.
but i would like to add space at the end of each record till 135 length.
Can you please help me how to add speace at the end of record.
regards
MalikSo why did you said that in your first posting? My glass sphere is out for cleaning...
Instead of type c use strings and add spaces until they have the appropriate length.
loop at outtab assigning <pout>.
while strlen( <pout>-val ) < 135.
concatenate <pout>-val `` into <pout>-val.
endwhile.
endloop. -
How to add marker on the clip?
Hi!!!
Could you help me, how to add marker on the clip? Not on the sequence. I need the marker to moving as I moving clip in the sequence.
Thanks!!!Ohhh... I just had to switch to the source monitor. OK. Just I don't use the source monitor usally. Only the program one. Thank you. It worked!
Fri, 12 Oct 2012 05:02:08 -0600 от Jim Simon <[email protected]>:
>
>
Re: How to add marker on the clip?
created by Jim Simon in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion -
How to add request in the buffer
Hii All,
How to add request in the buffer in bulk.
i am using following command.
tp addtobuffer requestno <sid>
but after doing it is giving me the following error
C:\usr\sap\trans\bin>tp addtobuffer BWDK900161 BT1
^CThis is tp version 340.07 (release 640, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
Pls help.
Regards,
Viren.Hi Rolf,
thax for your reply.
But still it is not working it shows following message.
C:\usr\sap\trans\bin>tp addtobuffer BWDK900051 BT1 pf=c\usr\sap\trans\bin\TP_DOM
AIN_BT1.PFL
This is tp version 340.07 (release 640, unicode enabled)
E-c\usr\sap\trans\bin\TP_DOMAIN_BT1.PFL could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in c\usr\sap\trans\bin\TP_DOMAIN_BT1.PFL: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
Regards,
Viren. -
How to add filter in the dist. model
hi,
how to add filter in the dist. model
thanks
RubanHi,
Please try this.
1. Go to transaction BD64.
2. Click on Change button.
3. Expand the corresponding model view.
4. Expand the corresponding message type (i.e MATMAS).
5. Place the cursor to 'No filter set' and double click.
6. Click on Create Filter Group.
7. Add your filter from here ...
8. Once done, save the model view.
For more information, please check this link.
http://help.sap.com//saphelp_470/helpdata/EN/0b/2a611c507d11d18ee90000e8366fc2/frameset.htm
Regards,
Ferry Lianto -
How to add Acrobat to the Microsoft Office ribbon?
how to add Acrobat to the Microsoft Office ribbon?
Hi ebender888,
What versions of Acrobat and Office do you have? See if this post helps: https://answers.acrobatusers.com/Why-Acrobat-PDFmaker-Office-COM-Addin-tab-disappearnig-Wo rd-Office-2013-q152959.aspx
If not, let us know what software you're using, and we'll try to get you pointed in the right direction.
Best,
Sara -
HT5654 how to add videos to the ipad using the latest version of itunes
how to add videos to the ipad using the latest version of itunes ?
Hello zaraa90,
After reviewing your post, I have located an article that can help with syncing content. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
Sync your iPhone, iPad and iPod with iTunes using USB
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
How to add Video on the OAF page like youtube ?
Any one know how to add Video on the page?
If you are getting HTML code from one of these slideshow.com places, you can add this code to your iWeb pages with a little bit of work. Two things to keep in mind...1. No way to do this via iWeb directly, so it involves editing the published html files, and 2. Because iWeb republishes the html files whenever you update the your webpage, you will lose your changes and have to redo them to add your slideshows back.
The general directions are as follows...
1. Decide where you want your slideshow and know exactly what dimensions you need.
2. Insert a text box onto your page and adjust its size to exactly your dimensions.
3. Type in some uniquely identifiable text like, "SLIDESHOWHERE" without changing the font or anything else...just type it in.
4. Publish your page with iWeb.
5. Find the html file associated with your published page (either on your iDisk or in a folder depending on how you published) and open it in any text editor (like Microsoft Word, or Textedit, or anything). You may need to set your text editor to "ignore rich text" or to "show HTML source".
6. Scroll through the html file and locate your placeholder text, e.g. "SLIDESHOWHERE".
7. Replace the placeholder text with your html code and save your page.
That's it. You should see your slideshow element show up in Safari where you placed the text box in iWeb! -
Reg:How to add fields to the scripts in detail
How to add fields to the scripts in detail.
Plz give me one example help me out.Hi
add fields to the scripts by sending that field between two &s.
for example if u want to add lifnr of lfa1 table then pass field like this.
&wa_lfa1-lifnr&.here wa_lfa1 is work area for internal table it_lfa1.
if name1 then &wa_lfa1-name1&
in this way you can add fields to the script under any window.
i am sending one example program for scripts.
&--structure declaration--
TYPES:BEGIN OF ST_LFA1,
LIFNR TYPE LFA1-LIFNR,
NAME1 TYPE LFA1-NAME1,
LAND1 TYPE LFA1-LAND1,
ORT01 TYPE ORT01,
REGIO TYPE REGIO,
END OF ST_LFA1.
TYPES:BEGIN OF ST_EKKO,
EBELN TYPE EKKO-EBELN,
BUKRS TYPE EKKO-BUKRS,
AEDAT TYPE EKKO-AEDAT,
ERNAM TYPE EKKO-ERNAM,
BSTYP TYPE EKKO-BSTYP,
LIFNR TYPE EKKO-LIFNR,
END OF ST_EKKO.
TYPES:BEGIN OF ST_EKPO,
EBELN TYPE EKPO-EBELN,
EBELP TYPE EKPO-EBELP,
LOEKZ TYPE EKPO-LOEKZ,
AEDAT TYPE EKPO-AEDAT,
MATNR TYPE EKPO-MATNR,
NETWR TYPE EKPO-NETWR,
END OF ST_EKPO.
&--internal table,work area declaration--
DATA:WA_LFA1 TYPE ST_LFA1,
IT_LFA1 TYPE STANDARD TABLE OF ST_LFA1,
WA_EKKO TYPE ST_EKKO,
IT_EKKO TYPE STANDARD TABLE OF ST_EKKO,
WA_EKPO TYPE ST_EKPO,
IT_EKPO TYPE STANDARD TABLE OF ST_EKPO.
&--data declaration--
DATA:TOTAL TYPE EKPO-NETWR,
V_EBELN TYPE EKKO-EBELN.
data: v_item(20) type c.
&--parameter for purchase document number--
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS P_PURDOC LIKE V_EBELN.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
PERFORM GET_DATA_FROM_EKKO.
PERFORM GET_DATA_FROM_LFA1.
PERFORM GET_DATA_FROM_EKPO.
&--grand total--
LOOP AT IT_EKPO INTO WA_EKPO.
TOTAL = TOTAL + WA_EKPO-NETWR.
CLEAR WA_EKPO.
ENDLOOP.
&--open form--
CALL FUNCTION 'OPEN_FORM'
EXPORTING
DEVICE = 'PRINTER'
FORM = 'Z_50886_VENDOR'
LANGUAGE = SY-LANGU
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
MAIL_OPTIONS = 6
ARCHIVE_ERROR = 7
INVALID_FAX_NUMBER = 8
MORE_PARAMS_NEEDED_IN_BATCH = 9
SPOOL_ERROR = 10
CODEPAGE = 11
OTHERS = 12
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for header details--
READ TABLE IT_EKKO INTO WA_EKKO INDEX 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'HEAD'
WINDOW = 'HEADER'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for item details--
LOOP AT IT_EKPO INTO WA_EKPO.
concatenate wa_ekko-ebeln wa_ekpo-ebelp into v_item.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM'
WINDOW = 'MAIN'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
&--write form for vendor details--
READ TABLE IT_LFA1 INTO WA_LFA1 INDEX 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'VENDOR'
WINDOW = 'ADDRESS'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for grand total--
CALL FUNCTION 'WRITE_FORM'
EXPORTING
WINDOW = 'TOTAL'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--close form--
CALL FUNCTION 'CLOSE_FORM'
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form get_data_from_ekko
FORM GET_DATA_FROM_EKKO .
SELECT EBELN
BUKRS
AEDAT
ERNAM
BSTYP
LIFNR
FROM EKKO INTO TABLE IT_EKKO WHERE EBELN = P_PURDOC.
ENDFORM. " get_data_from_ekko
*& Form get_data_from_lfa1
FORM GET_DATA_FROM_LFA1 .
IF NOT IT_EKKO[] IS INITIAL.
SELECT LIFNR
NAME1
LAND1
ORT01
REGIO
FROM LFA1 INTO TABLE IT_LFA1 FOR ALL ENTRIES IN IT_EKKO WHERE
LIFNR = IT_EKKO-LIFNR.
ENDIF.
ENDFORM. " get_data_from_lfa1
*& Form get_data_from_ekpo
FORM GET_DATA_FROM_EKPO .
IF NOT IT_EKKO[] IS INITIAL.
SELECT EBELN
EBELP
LOEKZ
AEDAT
MATNR
NETWR
FROM EKPO INTO TABLE IT_EKPO
WHERE EBELN = P_PURDOC.
ENDIF.
ENDFORM. " get_data_from_ekpo -
How to add reminders on the new ios6? I don't have the plus (+) on the upper right as seen on ios5 to add reminder.
Also, tap the lines at the top left and create a new list, that should give you the + back.
-
How to add subpartitions to the existing subpartition template
Hi All,
My Question is ,how to add Subpartition to the exiting subpartition template. e
like i have created a table with subpartition template with with 5 subpartitions like
subpartiton one_1 value (121)
subpartition two_2 value(122)
and now i one to add one more subpartitin to the existing subpartition template(Like modify the existing subpartition templete).
subpartition three_3 value(123)
Could any suggest me.
Thanks
Sree>
My Question is ,how to add Subpartition to the exiting subpartition template.
>
Follow the example in the section for 'Modifying a Subpartition Template' in the VLDB and Partitioning Guide
http://docs.oracle.com/cd/E11882_01/server.112/e25523/part_admin002.htm#i1007904
>
You can modify a subpartition template of a composite partitioned table by replacing it with a new subpartition template. Any subsequent operations that use the subpartition template (such as ADD PARTITION or MERGE PARTITIONS) now use the new subpartition template. Existing subpartitions remain unchanged.
If you modify a subpartition template of an interval-* composite partitioned table, then interval partitions that have not yet been created use the new subpartition template.
Use the ALTER TABLE ... SET SUBPARTITION TEMPLATE statement to specify a new subpartition template. For example:
ALTER TABLE emp_sub_template
SET SUBPARTITION TEMPLATE
(SUBPARTITION e TABLESPACE ts1,
SUBPARTITION f TABLESPACE ts2,
SUBPARTITION g TABLESPACE ts3,
SUBPARTITION h TABLESPACE ts4 -
How to add one more field to an exist internal table
hi abapers
i am a very new abap programmer and just started learning it.
i want to know How to add one more field to an exist internal table.
lemme me put my question in a very simple way.
i have a internal table having fields f1,f2,f3 and which also that internal also contains some data.
now i want to add two more fields (mm & nn) to that internal table now.
how can i do that.
and i wanna know the websites names where i can find some brain teasing questions in abap programming.
eagerly waiting for ur reply
regards,
Maqsood A KhanHi, MAQSOOD.
You can insert more fields in your internal table like this.
refer this code snippet.
DATA : BEGIN OF tbl_itab OCCURS 0.
INCLUDE STRUCTURE zsdtc009.
DATA : vkorg LIKE vbak-vkorg, "inserted one
vtweg LIKE vbak-vtweg, "inserted one
vkbur LIKE vbak-vkbur, "inserted one
vkgrp LIKE vbak-vkgrp, "inserted one
END OF tbl_itab.
you can also read the book "Teach yourself abap in 21 days"
at http://cma.zdnet.com/book/abap/
but that book is just about basic concept of abap and report program.
it doesn't give a lecture for on-line program.
you can get pdf version books(about abap, sap...things) from sap.
http://help.sap.com/printdocu/core/Print46c/en/Data/htm/english.htm
I wish I could help you.
Regards
Kyung Woo. -
How can I turn off the beep my incoming callers hear when my phone is busy?
How can I turn off the beep my incoming callers hear when my phone is busy?
I appreciate your concern! This feature is unable to be removed. The only way an incoming caller would not hear this particular beep is if a ringback tone is active on the line.
YosefT_VZW
Follow us on Twitter @VZWSupport -
How can I block all incoming international calls?
How can I block all incoming international calls?
Verizon does not value me as a customer because they would not assist me with getting the blocks done. The services Verizon offered, "Family Base" does not block what I and many, many, many, more verizon customers need. The APP is working GREAT! In the 1st two days it blocked over 25 unwanted solicitations from India. It blocked "unknown", Private, 1234, 123456789566, 000-000-0000, and other 10 digit numbers! NOKIA has done a fabulous job with the developement of their APP. Verizon could block these calls but is not willing to do so and in the process try to sell me a product that wouldn't work.
Maybe you are looking for
-
Computer Crashed, need to reload Itunes
Hi, My computer crashed and it looks like I'm going to have to reformat my harddrive. I am going to attempt to slave the h/d to another pc in order to save some of my files before I reformat. Will saving my entire Itunes directory, installing Itunes
-
Eqsys password is no longer valid.
I have been in the admin screens for my SES install, configuring different crawlers, but for some reason I cannot log into the admin anymore because it says my password is invalid for eqsys. I can however stop/start SES with the administration passwo
-
Oracle Service Bus: Monitoring/Tracking Consumer Services?
Hi, since we have a Oracle Service Bus and a Oracle Service Registry, is there any standard solution for tracking which consumer services/applications are accessing which provider services? What we need is monitoring the applications (consumer) which
-
HT201089 Where does the ask to buy notification go?
When my son requests to get an app, I get the notice on my phone, but I'm not always able to get right to it, and after half a minute or so, the notice goes off my screen. Where does it go? Where can I find it? Can I still bring it up later to app
-
How to pass table contents to Workflow?
hi all, my workflow accepts a table as input. when i execute the Workflow from SWUS i can enter the table contents. Now how to pass these <b>table contents to workflow through Function module</b> say the table has 3 columns and 5 rows. regards. Subba