How to add a 2nd DIT to ODs ldap server?

Hi,
I need to setup a 2nd database (DIT) on my OpenLDAP server, which is part of OD. Normally one would just tweak the slapd.conf file to contain the new DB and its settings, like suffix rootdn and so forth, but this doesn't seem to work on Leopard server while it just works on Tiger server.
Anybody has tried this before?
Cheers,
budy

Hi Stephan,
I have not tried this but I think "doesn't seem to work" is not the best error description you could provide.
Does slapd still start up?
Do you get errors?
Have you tried starting the server with
sudo slapd -d config
This wil print some information to stdout about the processing of the configuration file.
HTH
Regards
Martin

Similar Messages

How to add a 2nd hard drive to HP Pavilion DV7!

How to add a 2nd hard drive to HP Pavilion DV7-3165DX, product # WA794UA or WA794UAR.
(1) Order HDD, hard drive, hardware kit. HDD hardware kit includes mounting rails, static shield, screws, rubber isolators, and SATA to motherboard cable. Check your model & Product # for compatibility.
HP Parts HDD hardware kit 517639-001 for DV7-3165DX product# WA794UA and WA794UAR.
(2) Consult Drives - Windows 7 PDF, table of contents, 7 Replacing a drive in the secondary hard drive bay. This will show you how to install a 2nd HDD in a HP DV7.
Drives - Windows 7 PDF
(3) In Windows 7 select Computer, Select the HDD installed, Format (if not already formatted).
(4) If HDD does not show up in Windows 7 under Computer, go to Start (Menu), Search Programs and Files, enter "Computer Management", select Storage, Disk Management (Local), look for the Bay 2 HDD (should show up as Disc 1, Bay 1 HDD should show as Disc 0), Format the 2nd HDD (The one you just installed).
Update: I have the 2nd HDD (WD 1TB) installed, Windows now recognises it after completing the steps I mentioned in step 4, Format with default allocation NTFS 931.51GB free, 118MB used for formatting. Format with default allocation exFAT 931.51GB free, 1MB used for formatting. I selected NTFS format to reduce file fragmenting.
This question was solved.
View Solution.

When i added my 2nd HDD I was ready to get it ordered and shipped, so it would arrive before I arrived home. I also was not sure if it would be offered anywhere else and be 100% compatible. The quality of the factory HP part is good. Since then I found a cheeper source. Newmodeus DV7-3xxx Hard Drive Caddy $27.95 +tax +shipping. Not sure if the quality is the same. If this helps you, post your results and kudos.

How i add my 2nd iphone on itune

I had lost my iPhone 5s no 1st march 2014. Phone is offline since I lost it, so I could not track it using "find my iPhone" apps. Now I will by a new iPhone 4s, so I want to know how can I add my 2nd iPhone to existing account and to iTunes ? please help me!

You add it the exact same way you added the first one.
(108577)

How to create JDBC data source w/o LDAP server

I am trying to test using JDBC data source on a computer without a LDAP server. Is there an alterative JNDI solution? How about using file system or RMI registry JNDI service providers?

Any J2EE container should be able to handle that. I use JNDI data sources with Tomcat 4.1.27. I'm sure any other J2EE app server (e.g., WebLogic, WebSphere, JBOSS, etc.) would be able to manage it, too. - MOD

[OBPM 10gR3]How to configer a hybrid directory with Oracle LDAP Server

Hey, guys,
Does anyone have experience on configering a hybrid directory with Oracle LDAP Server? How to config the mapping conf file for Oracle LDAP in the directory of \OraBPMwlHome\conf?
Here is my conf file. But I got some LDAP mapping errors. It's really weird OBPM doesn't support Oracle's self LDAP, at least it does not provide the conf file.
-----------errors------------
Exception [javax.naming.OperationNotSupportedException: [LDAP: error code 53 - Function Not Implemented]; remaining name '']. Reason: [LDAP: error code 53 - Function Not Implemented] fuego.directory.DirectoryRuntimeException: Exception [javax.naming.OperationNotSupportedException: [LDAP: error code 53 - Function Not Implemented]; remaining name '']. at fuego.directory.DirectoryRuntimeException.wrapException(DirectoryRuntimeException.java:85) at fuego.directory.hybrid.ldap.JNDIQueryExecutor.select(JNDIQueryExecutor.java:203) at fuego.directory.hybrid.ldap.JNDIQueryExecutor.selectAllFromView(JNDIQueryExecutor.java:84) at fuego.directory.hybrid.ldap.JNDIQueryExecutor.selectAllFromView(JNDIQueryExecutor.java:64) at fuego.directory.hybrid.ldap.Repository.selectAllFromView(Repository.java:54) at fuego.directory.hybrid.ldap.LDAPPollingEventGenerator.buildCurrentProxies(LDAPPollingEventGenerator.java:98) at fuego.directory.provider.notifiers.BasePollingEventGenerator.generateEvents(BasePollingEventGenerator.java:41) at fuego.directory.hybrid.HybridMultipleEventGenerator.generateEvents(HybridMultipleEventGenerator.java:43) at fuego.directory.provider.notifiers.DirectoryNotifier.notifyChanges(DirectoryNotifier.java:403) at fuego.server.service.DirectoryListener.updateEngineFromDirectoryImpl(DirectoryListener.java:309) at fuego.server.service.DirectoryListener$DirectoryPollingItem.execute(DirectoryListener.java:351) at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304) at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470) at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551) at fuego.transaction.TransactionAction.start(TransactionAction.java:212) at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123) at fuego.server.execution.DefaultEngineExecution.executeAutomaticWork(DefaultEngineExecution.java:62) at fuego.server.execution.EngineExecution.executeAutomaticWork(EngineExecution.java:42) at fuego.ejbengine.ejb.EngineStartupBean.executeItem(EngineStartupBean.java:192) at fuego.ejbengine.ejb.EngineStartupBean.updateFromDirectory(EngineStartupBean.java:172) at fuego.ejbengine.ejb.engine_startup_bpmengine_wodkyx_ELOImpl.updateFromDirectory(engine_startup_bpmengine_wodkyx_ELOImpl.java:365) at fuego.ejbengine.servlet.SchedulerServlet$DirectoryPollingTask.runImpl(SchedulerServlet.java:269) at fuego.ejbengine.servlet.SchedulerServlet$ScheduledTask.run(SchedulerServlet.java:208) at java.util.TimerThread.mainLoop(Timer.java:512) at java.util.TimerThread.run(Timer.java:462) Caused by: javax.naming.OperationNotSupportedException: [LDAP: error code 53 - Function Not Implemented]; remaining name '' at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3078) at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2951) at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2758) at com.sun.jndi.ldap.LdapCtx.searchAux(LdapCtx.java:1812) at com.sun.jndi.ldap.LdapCtx.c_search(LdapCtx.java:1735) at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_search(ComponentDirContext.java:368) at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.search(PartialCompositeDirContext.java:338) at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.search(PartialCompositeDirContext.java:321) at javax.naming.directory.InitialDirContext.search(InitialDirContext.java:248) at fuego.jndi.FaultTolerantDirContext.search(FaultTolerantDirContext.java:867) at fuego.directory.hybrid.ldap.JNDIQueryExecutor.select(JNDIQueryExecutor.java:190) ... 23 more
-----------mapping conf file for Oracle LDAP---------
<?xml version="1.0" encoding="UTF-8"?>
<?fuego version="6.1 ALPHA" application="albpmenterprise"?>

<config>
     <object id="person">
          <object-filter>
               <![CDATA[
                    (objectclass=inetOrgPerson)
               ]]>
          </object-filter>
          <relative-dn>
               
          </relative-dn>
          <attribute id="id" value="uid"/>
          <attribute id="lastName" value="sn"/>
          <attribute id="firstName" value="givenname"/>
          <attribute id="accountLock" value="orclIsEnabled">
               <attribute-comparator operation="EQUALS" compareTo="ENABLED"/>
               <filter>
                    <![CDATA[
                         ($accountLock=ENABLED)
                    ]]>
               </filter>
          </attribute>
          <attribute id="facsimileTelephoneNumber" value="facsimileTelephoneNumber"/>
          <attribute id="displayName" value="displayName"/>
          <attribute id="mail" value="mail"/>
          <attribute id="telephoneNumber" value="telephoneNumber"/>
          <attribute id="employeeId" value="employeeNumber"/>
          <attribute id="thumbnailPhoto" value="jpegPhoto"/>
          <attribute id="manager" value="manager"/>
          <attribute id="modifyTimeStamp" value="modifytimestamp"/>
     </object>
     <object id="group">
          <object-filter>
               <![CDATA[
                    (objectclass=orclGroup)
               ]]>
          </object-filter>
          <relative-dn>
               
</relative-dn>
          <attribute id="id" value="dn"/>
          <attribute id="modifyTimeStamp" value="modifytimestamp"/>
          <attribute id="displayName" value="displayName"/>
          <attribute id="name" value="cn"/>
          <attribute id="description" value="description"/>
          <attribute id="assignedParticipants" value="uniquemember"/>
          
          <attribute id="ou" value="uniquemember"/>
     </object>
     <object id="ou">
          <object-filter>
               <![CDATA[
                    (objectclass=domain)
               ]]>
          </object-filter>
          <relative-dn>
               
</relative-dn>
          <attribute id="name" value="orclsubscriberfullname"/>
          <attribute id="description" value="description"/>
     </object>
</config>
Edited by: Lemonice on 2009-3-30 上午2:08
Edited by: Lemonice on 2009-3-30 下午7:01
Edited by: Lemonice on 2009-3-30 下午8:43

Hi,
in my case, I am trying to configure the OBPM directory using ALUI and its native LDAP service.
Now, I found that the first name and the last name in BPM are retrieved from the ALUI display name : provided we enter the display name in the format %first name% + %last name% we get them into BPM. But the display name is not always in this format...
In addition, it's the portal telephone number information which is retrieved into BPM Telephone and Fax numbers.
And, the email adress remains blank
I have installed the latest patch for OBPM (Version: 10.3.1.0.0 Build: #97172)
Would you have any documentation about creating a Profile Web Service in ALUI and specifying which LDAP attributes to map to which ALUI properties in the Profile Source ?
Thanks !
Edited by: vVince on May 6, 2009 3:46 PM

How to add a 2nd Library to photo?

In iphoto I used to have two libraries and used to select which one I wanted to look at at startup of the app.
1) Does photo have the ability to have multiple libraries
2) How do i import my 2nd iPhoto library once the initial setup is done into a 2nd photo library?
3) If I try to import a 2nd library and ADD it to the first then will it give me the option to skip duplicates
Thanks!

Steve McRea wrote:
In iphoto I used to have two libraries and used to select which one I wanted to look at at startup of the app.
1) Does photo have the ability to have multiple libraries
2) How do i import my 2nd iPhoto library once the initial setup is done into a 2nd photo library?
3) If I try to import a 2nd library and ADD it to the first then will it give me the option to skip duplicates
Thanks!
1 Yes
2 This was answered in another thread: click on Photos while holding alt key, a dialogue box with a choice of libraries to convert will appear.
You can test this by creating a new iPhoto library and converting it.
3 Sorry can't help

How to add a 2nd ipod to PC

I just purchased my second ipod, an 80G classic video pod. When I try to add it to ITunes, I get the Software Agreement but does not allow me to continue to register it to the same PC where my older ipod is installed.
Help please.

What happens when you try to register, are you getting an error of some sort? I've seen a number of posts recently where people weren't seeing the button to complete the registration, is that what's happening with you? The solution to that one has usually been to increase your screen resolution, you'll find the instructions on this Microsoft page:
Windows XP - How to change your screen resolution

How to add a 2nd wireless adapter (usb) to a MacBook Pro?

I am in an area with a bad signal for wireless, and my airport won't pick up the signal reliably. I have purchased a hama WLAN USB-Stick with flexible antenna, so I can move it around for the best signal. It has drivers for OS X 10.5. However, the installation directions are for older versions of Mac OS X - not Leopard.
System Profiler detects the adapter, and I have installed the drivers from hama. Now, the instructions say to click on the Apple and select Environment in order to add a new ethernet port (en2, for example) - but, there is no 'Environment' selection under the Apple menu in Leopard.
So, how do I add this new port???

I have gotten it to work, but first, for Tim, the manual can be found here (pick the language of your choice) -
http://www.hama.at/portal/searchSelectedProductNO/type*201/action*1026/searchMode*1/qwlan+usb-stick
In searching online, I found a "patch" at:
http://www.hama.at/portal/searchSelectedProductNO/type*201/action*1026/searchMode*1/qwlan+usb-stick
The instructions on that page include the following text:
"This is USB CDC for g_ether Linux devices on OS X 10.5 ("Leopard"), patched by Angel Roman of Bug Labs. It has been tested to run on OS X 10.5.2 on Intel Macs.
This patch exists in order to provided IP-over-USB capabilities to OS X, allowing you to access various embedded Linux gadget-type devices ... connected to your Mac.."
That sounded like what I needed, so I went ahead and installed their patch - and, it worked. I unplugged the hama device from the USB port, installed the patch, and restarted my machine. Once everything was up, I plugged in the device - and up came the message that a new network device had been detected. Everything worked great from there on, and I'm connected to the hama device now in order to respond to Tim's message! It also shows up in the Network Utility as en2, just as it should.

HOw to add a 2nd monitor to my DX4380- UR22

I only have my HDMI open and my monitr is an older version using a SVGA
This question was solved.
View Solution.

Hello there ArsenalOC1886!: to answer this question specfically
why not buy a cable that has the HDMI on one end{the PC} & a SVGA at the other(the 2nd monitor)
or get a HDMI\SVGA adapter at your local computer shop
with plug & play being as advanced as it is itshould work unless it's incompatible
good luck
hope this enlightens, clarifies & helps
spacechild

How to add a 2nd HD to p6-2035uk.

FAQ mentions but doesn't adtually address this question.
I cant see any 'spare' bay. Is it possible to add a bay in which to install another HD - there are clearly spare power and SATA connections.

Hi:
Below is the link to the upgrading and servicing guide for your PC.
http://h10032.www1.hp.com/ctg/Manual/c03022710.pdf
It does not appear there is anywhere you can add as second hard drive.
Bear in mind that HP uses these power supplies and motherboards on different model PC's, which may explain the extra power connectors and sata ports.
Is it possible to install a HDD under the CD rom drive by using a 3.5" hard drive to CD rom bay caddy?
That seems to be the only place that you could do that, but I can't say for sure as the diagrams don't help a whole lot.
Paul

How to add a 2nd hard drive to DV7-3080US

The hard drive died on my dv7-3080us. It was a 500GB drive.
I would like to nreplace it with a 1TB drive and in addition
add a second drive. Specifically I would add a
SAMSUNG 840 EVO MZ-7TE250BW 2.5" 250GB SATA 6Gb/s
TLC Internal Solid State Drive (SSD).
Will the system support a 1TB drive and 250GB solid state drive?

Yes no problem. Use the SSD as the primary/OS/boot drive in slot 1. You will need a caddy for the 1 TB drive in Slot 2. Visit newmodeus.com to buy the caddy and for video tutorials.

How to add user in administrator group of project server 2010 with powershell command ?

I want to add one user in Administrator group of Project Server .
Please let me know how to do this through power shell command.

Hello,
You would need to use the PSI in your PowerShell commands. Here is a .Net example to get you started, convert this to PowerShell:
http://blogs.msdn.com/b/ajjose/archive/2013/05/24/creating-a-project-server-user-and-adding-user-to-a-group-through-psi.aspx
Examples of PowerShell and the PSI can be found here in some of the scripts:
http://gallery.technet.microsoft.com/scriptcenter/Update-Server-Lookup-table-bb1ae14f
http://gallery.technet.microsoft.com/scriptcenter/Create-Server-2010-2013-19bd3cc7
http://gallery.technet.microsoft.com/scriptcenter/Bulk-create-Server-Sites-784f7b29
These wont do what you need but will give you an idea of using the PSI in PowerShell
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

How to add members to aclGroupAddr without being ldap directory manager?

Shared mail folders can be shared to a group e.g [email protected], how does one allow a delegated administrator to define the members of the group. I assumed that it referred to a group created in DA, but the value aclGroupAddr does not get updated for the users added to the group. The only way I can see how to control the mailing list group mambers is to add the group email address to the aclGroupAddr field for the useer in ldap (using DSCC). Is there a better way?

ethoms wrote:
Shared mail folders can be shared to a group e.g [email protected], how does one allow a delegated administrator to define the members of the group.
You cannot use DA for this purpose at this time. There is an RFE which if implemented could allow you to use a static-groups defined in DA to restrict access to a shared mail folder.
RFE#6264218 - "Make the group representation used in user entries to indicate ismemberof more configurable".
This is an old RFE which needs customers to push for it to be implemented.
I assumed that it referred to a group created in DA, but the value aclGroupAddr does not get updated for the users added to the group. Correct. You need to manually add this attribute to each user that needs access to the folder using some other means e.g. ldapmodify.
The only way I can see how to control the mailing list group mambers is to add the group email address to the aclGroupAddr field for the useer in ldap (using DSCC). Is there a better way?No.
Regards,
Shane.

How to Add a New CGI-Handler to Web Server?

I need to setup a website that will have pages coded in "LiveCode" (http://livecode.com/), an English-like scripting language, that can be used as an 'easier-to-program' replacement for PHP. It has its own interpreter ("livecode-server"), which is supposed to work under Apache as a cgi script. The idea is that the programmer writes web pages in LiveCode, composed of HTML with embedded LiveCode scripting, and these pages are saved using their own extension (".lc"). When a ".lc" page is requested, Apache should send the page for processing by the 'livecode-server' cgi.
The installation instructions for 'livecode-server' are quite simple. They state that it should be able to be easily installed via an '.htaccess' file, like this:
1) in the website's root directory, add a ".htaccess" file with the following directives:
Options ExecCGI
AddHandler livecode-script .lc
Action livecode-script /cgi-bin/livecode-server
2) put the 'livecode-server' executable inside your 'cgi-bin' folder
These instructions are obviously for users in a shared host environment, but I thought I should be able to do the same with OS X Web Server. But... where can I find a site's "cgi-bin" folder?
Any guidance is truly appreciated.

I tried using a custom httpd_livecode.conf file, and storing it in /Library/Server/Web/Config/apache2/other, but without success. To be totally honest, I'm not certain as to whether the configuration is not loading, or whether there is just something wrong with my syntax, and right now I just don't have the time to troubleshoot.
I did manage to get it working with the .htaccess file, which was quite easy, once I knew where to put the executable - which, as you mentioned, had to be in /Library/Server/Web/Data/CGI-Executables.
So, for future reference, the 'recipe' for adding a new cgi handler via .htaccess is:
place the cgi executable (usually a language parser or interpreter) into
/Library/Server/Web/Data/CGI-Executables
make sure the parser/interpreter (and any accompanying files or directories) are readable and executable (usually permissions should be set to '755')
in your site folder, add a .htaccess file with the following contents:
Options ExecCGI
AddHandler script-type .extensionType
Action script-type /cgi-bin/script-interpreter
In the case of LiveCode, my .htaccess file looks like this:
Options ExecCGI
AddHandler livecode-script .lc
Action livecode-script /cgi-bin/livecode-server
And the 'livecode-server' executable, as well as its accompanying files, were downloaded directly from the LiveCode website, and placed in /Library/Server/Web/Data/CGI-Executables.
last of all in Server.app, in the Advanced settings for your site, make sure you have enabled "Allow overrides using '.htaccess' files"

How to add attachment to FI document from sap server

Hi.SAP experts:
I have files on SAP Server,and I want to attach these files to my FI Document,how could I achieve this goal without download the files into my local computer??
Best Regards
Martin Xie

This could help you:
http://www.whypad.com/posts/sap-attach-documents-to-a-journal-entry/45/

How to add a 2nd DIT to ODs ldap server?

Similar Messages

Maybe you are looking for