How to add a 2nd HD to p6-2035uk.

FAQ mentions but doesn't adtually address this question.
I cant see any 'spare' bay. Is it possible to add a bay in which to install another HD - there are clearly spare power and SATA connections.

Hi:
Below is the link to the upgrading and servicing guide for your PC.
http://h10032.www1.hp.com/ctg/Manual/c03022710.pdf
It does not appear there is anywhere you can add as second hard drive.
Bear in mind that HP uses these power supplies and motherboards on different model PC's, which may explain the extra power connectors and sata ports.
Is it possible to install a HDD under the CD rom drive by using a 3.5" hard drive to CD rom bay caddy?
That seems to be the only place that you could do that, but I can't say for sure as the diagrams don't help a whole lot.
Paul

Similar Messages

How to add a 2nd hard drive to HP Pavilion DV7!

How to add a 2nd hard drive to HP Pavilion DV7-3165DX, product # WA794UA or WA794UAR.
(1) Order HDD, hard drive, hardware kit. HDD hardware kit includes mounting rails, static shield, screws, rubber isolators, and SATA to motherboard cable. Check your model & Product # for compatibility.
HP Parts HDD hardware kit 517639-001 for DV7-3165DX product# WA794UA and WA794UAR.
(2) Consult Drives - Windows 7 PDF, table of contents, 7 Replacing a drive in the secondary hard drive bay. This will show you how to install a 2nd HDD in a HP DV7.
Drives - Windows 7 PDF
(3) In Windows 7 select Computer, Select the HDD installed, Format (if not already formatted).
(4) If HDD does not show up in Windows 7 under Computer, go to Start (Menu), Search Programs and Files, enter "Computer Management", select Storage, Disk Management (Local), look for the Bay 2 HDD (should show up as Disc 1, Bay 1 HDD should show as Disc 0), Format the 2nd HDD (The one you just installed).
Update: I have the 2nd HDD (WD 1TB) installed, Windows now recognises it after completing the steps I mentioned in step 4, Format with default allocation NTFS 931.51GB free, 118MB used for formatting. Format with default allocation exFAT 931.51GB free, 1MB used for formatting. I selected NTFS format to reduce file fragmenting.
This question was solved.
View Solution.

When i added my 2nd HDD I was ready to get it ordered and shipped, so it would arrive before I arrived home. I also was not sure if it would be offered anywhere else and be 100% compatible. The quality of the factory HP part is good. Since then I found a cheeper source. Newmodeus DV7-3xxx Hard Drive Caddy $27.95 +tax +shipping. Not sure if the quality is the same. If this helps you, post your results and kudos.

How i add my 2nd iphone on itune

I had lost my iPhone 5s no 1st march 2014. Phone is offline since I lost it, so I could not track it using "find my iPhone" apps. Now I will by a new iPhone 4s, so I want to know how can I add my 2nd iPhone to existing account and to iTunes ? please help me!

You add it the exact same way you added the first one.
(108577)

How to add a 2nd Library to photo?

In iphoto I used to have two libraries and used to select which one I wanted to look at at startup of the app.
1) Does photo have the ability to have multiple libraries
2) How do i import my 2nd iPhoto library once the initial setup is done into a 2nd photo library?
3) If I try to import a 2nd library and ADD it to the first then will it give me the option to skip duplicates
Thanks!

Steve McRea wrote:
In iphoto I used to have two libraries and used to select which one I wanted to look at at startup of the app.
1) Does photo have the ability to have multiple libraries
2) How do i import my 2nd iPhoto library once the initial setup is done into a 2nd photo library?
3) If I try to import a 2nd library and ADD it to the first then will it give me the option to skip duplicates
Thanks!
1 Yes
2 This was answered in another thread: click on Photos while holding alt key, a dialogue box with a choice of libraries to convert will appear.
You can test this by creating a new iPhoto library and converting it.
3 Sorry can't help

How to add a 2nd ipod to PC

I just purchased my second ipod, an 80G classic video pod. When I try to add it to ITunes, I get the Software Agreement but does not allow me to continue to register it to the same PC where my older ipod is installed.
Help please.

What happens when you try to register, are you getting an error of some sort? I've seen a number of posts recently where people weren't seeing the button to complete the registration, is that what's happening with you? The solution to that one has usually been to increase your screen resolution, you'll find the instructions on this Microsoft page:
Windows XP - How to change your screen resolution

How to add a 2nd wireless adapter (usb) to a MacBook Pro?

I am in an area with a bad signal for wireless, and my airport won't pick up the signal reliably. I have purchased a hama WLAN USB-Stick with flexible antenna, so I can move it around for the best signal. It has drivers for OS X 10.5. However, the installation directions are for older versions of Mac OS X - not Leopard.
System Profiler detects the adapter, and I have installed the drivers from hama. Now, the instructions say to click on the Apple and select Environment in order to add a new ethernet port (en2, for example) - but, there is no 'Environment' selection under the Apple menu in Leopard.
So, how do I add this new port???

I have gotten it to work, but first, for Tim, the manual can be found here (pick the language of your choice) -
http://www.hama.at/portal/searchSelectedProductNO/type*201/action*1026/searchMode*1/qwlan+usb-stick
In searching online, I found a "patch" at:
http://www.hama.at/portal/searchSelectedProductNO/type*201/action*1026/searchMode*1/qwlan+usb-stick
The instructions on that page include the following text:
"This is USB CDC for g_ether Linux devices on OS X 10.5 ("Leopard"), patched by Angel Roman of Bug Labs. It has been tested to run on OS X 10.5.2 on Intel Macs.
This patch exists in order to provided IP-over-USB capabilities to OS X, allowing you to access various embedded Linux gadget-type devices ... connected to your Mac.."
That sounded like what I needed, so I went ahead and installed their patch - and, it worked. I unplugged the hama device from the USB port, installed the patch, and restarted my machine. Once everything was up, I plugged in the device - and up came the message that a new network device had been detected. Everything worked great from there on, and I'm connected to the hama device now in order to respond to Tim's message! It also shows up in the Network Utility as en2, just as it should.

HOw to add a 2nd monitor to my DX4380- UR22

I only have my HDMI open and my monitr is an older version using a SVGA
This question was solved.
View Solution.

Hello there ArsenalOC1886!: to answer this question specfically
why not buy a cable that has the HDMI on one end{the PC} & a SVGA at the other(the 2nd monitor)
or get a HDMI\SVGA adapter at your local computer shop
with plug & play being as advanced as it is itshould work unless it's incompatible
good luck
hope this enlightens, clarifies & helps
spacechild

How to add a 2nd DIT to ODs ldap server?

Hi,
I need to setup a 2nd database (DIT) on my OpenLDAP server, which is part of OD. Normally one would just tweak the slapd.conf file to contain the new DB and its settings, like suffix rootdn and so forth, but this doesn't seem to work on Leopard server while it just works on Tiger server.
Anybody has tried this before?
Cheers,
budy

Hi Stephan,
I have not tried this but I think "doesn't seem to work" is not the best error description you could provide.
Does slapd still start up?
Do you get errors?
Have you tried starting the server with
sudo slapd -d config
This wil print some information to stdout about the processing of the configuration file.
HTH
Regards
Martin

How to add a 2nd hard drive to DV7-3080US

The hard drive died on my dv7-3080us. It was a 500GB drive.
I would like to nreplace it with a 1TB drive and in addition
add a second drive. Specifically I would add a
SAMSUNG 840 EVO MZ-7TE250BW 2.5" 250GB SATA 6Gb/s
TLC Internal Solid State Drive (SSD).
Will the system support a 1TB drive and 250GB solid state drive?

Yes no problem. Use the SSD as the primary/OS/boot drive in slot 1. You will need a caddy for the 1 TB drive in Slot 2. Visit newmodeus.com to buy the caddy and for video tutorials.

How do i add a 2nd iphone to my itunes account

how do i add a 2nd iphone to my itunes account

Just login to that phone with your current iTunes account.

How can you add a 2nd i Tunes account on the same computer?

How can you add a 2nd i Tunes account to the same computer?

I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them. I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory. I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods. [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
I think you could adopt this idea to do what you need.
BS

Add 2nd ix2-dl NAS to router. How to port forward 2nd device?

I would like to add a 2nd ix2-dl to my DSL router. The first ix2-dl works well, but I am already port forwarding 443, 50500-50599 with this 1st router's ip address. Router will not let me forward the same ports to the second ix2's ip address without cancelling out the 1st ix2. How do I fix this? I'm using Windows7 and a DSL Actiontec router 192.168.0.x. Thanks!

This is a model depending router issue:
try the following :
Map eg. 50500-50505 to <Unit1-ip-adress> 443, 50550-50555 to <Unit2-ip-adress> 443 rather than a port range.
Ant then have a try with e.g. https://<dny.dns>:50501 for unit 1, https://<dny.dns>:50551
Various PCs / Laptops ( sorry I still really love Dell and Fujitsu ;-))
Supporting Customers ix2s and ix4s -- Love Networking ( not only technically ).
I am not a Lenovo Employee.
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

How to make a 2nd player in this racing game.

I'm using this tutorial to learn how to make games in Flash for a class, but it doesn't say how to make a 2nd player.
If somebody can show me the code to make alternative controls (W,S,A,D) for a 2nd car that'd be fantastic!
Thanks a lot,
Dd
http://www.emanueleferonato.com/2007/05/15/create-a-flash-racing-game-tutorial/

if (_root["car"+who].code == "player") {
if (Key.isDown(Key.DOWN)) {
               this["speed"+who] -= _root.backSpeed;
          //steer left - well, we could simply add or subtract a fixed angle (in degrees) to/from the car's rotation, but that's not good enough. In order to simulate a natural movement, steering must depend on speed, otherwise you will be able to rotate your car even if it's almost stopped and it will look like a propeller
          if (Key.isDown(Key.LEFT) && this["speed"+who]>0.3) {
               _root["car"+who]._rotation -= _root.rotationStep*(this["speed"+who]/_root.maxSpeed);
          //steer right - you already know what happens here
          if (Key.isDown(Key.RIGHT) && this["speed"+who]>0.3) {
               _root["car"+who]._rotation += _root.rotationStep*(this["speed"+who]/_root.maxSpeed);
You basically have to make a second conditional clause that starts:
if (_root["car"+who].code == "player2") {
if (Key.isDown(/*Insert KeyCodeValue of the Key you want to use*/)) {....
The AS2 keycodes can be found here:
http://www.adobe.com/livedocs/flash/9.0/main/wwhelp/wwhimpl/common/html/wwhelp.htm?context=LiveDocs_Parts&file=00001136.html

How to add another Chapter Page for more then 6 chapters & add right arrow?

Hello,
I created a project via the Magic iDVD option and it worked great and added multiple chapter pages for more then 6 chapters. Now, I manually added a submeno off of main and added 6 chapters but I need multiple pages since I have 40 chapters... I can't figure out how to add another chapter page and create a RIGHT ARROW navigation button for the next pages...
I also looked at the map view and see that on the working pages there is page connected to page... I also cannot find a way to add a page connected vi map view...
I have searched the forum but none of the answers were clear on how to do this... any help would be appreciated...
Thanks! T.

Adding the submenu is easy...making the button for it a "right arrow" is not.
You can keep adding submenus to other submemus by navigating to the appropriate menu and then choose the "add submenu" command from the iDVD project menu. This can be done in either normal or map view.
However, this creates a "folder" button, (or other things in some themes) not a right arrow. I agree it should be a choice! My 2nd best solution is to chage the folder button to a "text only button" and label it "More Chapters > >"
Another solution (3rd best??) is to use command-shift-4 when you are one one of your other menus that DOES have a right arrow, and take a mini picture of the arrow. Then choose one of the oval menu buttons on the button pane, and drag this tiny picture onto the button. Re-size it to make it close to the same size as your other buttons. It will have a funny edge on it from the button style, but it will look like a right arrow.
John B

How to add a header to an InfoSpoke generated CSV

Hello everybody,
I would appreciate any suggestions on how to add a header line (with the field names) to the CSV-file generated by an InfoSpoke.
Thanks for your help.
Greetings,
Martin

if I recall correctly, that "header line" you're looking for, gets created automatically as a 2nd file... you could use a macro to combine both files in Excel?

How to add a 2nd HD to p6-2035uk.

Similar Messages

Maybe you are looking for