How to add a close button to a edge animation ?

How to add a close button to a edge animation ?

Welcome to our community, Laurie
You posted this in the FlashHelp section. Is that your actual
output type? If so, you will need to make edits to the FlashHelp
using Adobe Flash.
Cheers... Rick

Similar Messages

  • HT2492 how to add the close button icon on the internet tabs

    i dont know what happened but if i want to close the new tab i entered from the safari i still have to do the long process instead of just clicking the "x" button to close it,., it disappeared last night and i dont know how to put it back,., prolly i accidentally press an icon to detached it from the tool. how will i restore it?

    Since your posting in the swing project forum, I assume your talking about JDialog. If so, use JDialog.setDefaultCloseOperation( DO_NOTHING_ON_CLOSE ). Same method exists in JFrame as well, but not in JWindow.

  • How to add a custom button in WD screen to call a workflow in siebel?

    Hi All,
    We have a requirement to have a custom button at the summary screen(after the rule execution) "Create Opportunity", on clicking on it a new opportunity record should be created in Siebel. As we know the "Save" link calls "PolicyAutomationSaveSession" inbound web service method and saves the information in session table and we can modify the PreSession and PostSession workflows. But we are not sure how it calls the service method and where is the mapping defined.
    Can you please help me on how to add a custom button and how to invoke a workflow in siebel side to implement this requirement?
    Also is there any document which can help me to add a custom button in screen and to add the code behind the button?
    Thanks in advance!!
    Regards,
    Subhradeep

    Subhradeep,
    Closing a Web Determinations window is essentially the same as closing any HTML window. It involves javascript, which you would have to add to the Web Determinations templates.
    Essentially the javascript command to close a window is {{window.close}} or {{top.close}}
    For timing, you might be able to use the setTimeout function of Javascript (see: http://www.w3schools.com/jsref/met_win_settimeout.asp)
    At the risk of exposing exactly how bad my javascript skills are, I have attached a super-simple html fragment, a page that closes itself after 3 seconds. It may help you get started in the right direction. In general closing a window is a fairly dubious activity and is often not permitted by certain browsers. This html page at least works in Internet Explorer.
    <html>
         <head>
         <script language="JavaScript">
              setTimeout(closeMe, 3000);
              function closeMe() {
                   alert("This window will close");
                   top.close();
         </script>
         </head>
         <body><B>This window will close in three seconds</B></body>
    </html>
    {code}                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • How to add the REFRESH button in OOPs ALV grid

    how to add the REFRESH button in OOPs ALV grid

    Hi Naidu.
    Check the below code:
    Local Class Definition and implementation For events handeling
    CLASS LCL_EVENT DEFINITION .
      PUBLIC SECTION.
        METHODS :TOOLBAR FOR EVENT TOOLBAR OF  CL_GUI_ALV_GRID
                         IMPORTING E_OBJECT,
                 USER_COMMAND FOR EVENT USER_COMMAND OF CL_GUI_ALV_GRID
                         IMPORTING E_UCOMM.
    ENDCLASS.    
    CLASS LCL_EVENT IMPLEMENTATION.
      METHOD TOOLBAR.
        WA_TOOL-FUNCTION = 'ZFC1'.
        WA_TOOL-TEXT     = 'TEST'.
        WA_TOOL-ICON     = '@EA@'.
        APPEND WA_TOOL TO E_OBJECT->MT_TOOLBAR.
      ENDMETHOD.             "DISPLAY
      METHOD USER_COMMAND.
        IF E_UCOMM = 'ZFC1'.
              ENDIF.
      ENDMETHOD.                    "USER_COMMAND
    ENDCLASS.                    "LCL_EVENT IMPLEMENTATION
    MODULE STATUS_0200 OUTPUT.
      SET PF-STATUS 'ZALV_BTON'.
      SELECT * FROM VBAK INTO TABLE GT_VBAK
               UP TO 30 ROWS.
    **** CREATE CONTAINER OBJECT
      CREATE OBJECT MY_CONTAINER
        EXPORTING
          CONTAINER_NAME              = 'CC1'
         EXCEPTIONS
          CNTL_ERROR                  = 1
          CNTL_SYSTEM_ERROR           = 2
          CREATE_ERROR                = 3
          LIFETIME_ERROR              = 4
          LIFETIME_DYNPRO_DYNPRO_LINK = 5
          OTHERS                      = 6 .
    ****** GRID TO CONTAINER
      CREATE OBJECT ALV
          EXPORTING
          I_PARENT          = MY_CONTAINER
         EXCEPTIONS
          ERROR_CNTL_CREATE = 1
          ERROR_CNTL_INIT   = 2
          ERROR_CNTL_LINK   = 3
          ERROR_DP_CREATE   = 4
          OTHERS            = 5.
      CREATE OBJECT OBJ.
      SET HANDLER : OBJ->TOOLBAR FOR ALV.
      SET HANDLER : OBJ->USER_COMMAND FOR ALV.
    ****** ALV DISPLAY
      CALL METHOD ALV->SET_TABLE_FOR_FIRST_DISPLAY
        EXPORTING
          I_STRUCTURE_NAME              = 'VBAK'
        CHANGING
          IT_OUTTAB                     = GT_VBAK[]
        EXCEPTIONS
          INVALID_PARAMETER_COMBINATION = 1
          PROGRAM_ERROR                 = 2
          TOO_MANY_LINES                = 3
          OTHERS                        = 4.
    ENDMODULE.                 " STATUS_0200  OUTPUT
    *&      Module  USER_COMMAND_0200  INPUT
    *       text
    MODULE USER_COMMAND_0200 INPUT.
      IF SY-UCOMM EQ 'BACK'.
        LEAVE PROGRAM.
      ENDIF.
    ENDMODULE.                 " USER_COMMAND_0200  INPUT
    Regards
    Kumar M

  • How to add a link button in system form?

    how to add a link button in system form in the edit text?

    HI
    see the following code
    This creates an item "55" caption, and exittext ("550") and creates linked button "51" linked to "550"
            oItem = otmpform.Items.Add("55", SAPbouiCOM.BoFormItemTypes.it_STATIC)
            With oItem
                .Top = 315 + 30 + 15
                .Left = 12
                .Width = 100
                .Specific.Caption = "Többlet"
            End With
            otmpform.DataSources.UserDataSources.Add("550", SAPbouiCOM.BoDataType.dt_SHORT_TEXT)
            oItem = otmpform.Items.Add("550", SAPbouiCOM.BoFormItemTypes.it_EDIT)
            With oItem
                .Top = 315 + 30 + 15
                .Left = 120
                .Width = 100
                .Specific.DataBind.SetBound(True, "", "550")
                .AffectsFormMode = True
                .Description = otmpform.Items.Item("55").Specific.Caption
                .DisplayDesc = True
            End With
            oItem = otmpform.Items.Add("551", SAPbouiCOM.BoFormItemTypes.it_LINKED_BUTTON)
            With oItem
                .Top = 316 + 30 + 15
                .Left = 120 - 14
                .Width = 13
                .LinkTo = "550"
                .Specific.LinkedObject = SAPbouiCOM.BoLinkedObject.lf_GLAccounts
            End With
    Regards,
    J.

  • How to add a push button on an ALV grid  ?

    Hi,
    How to add a push button on an ALV grid, using ON_TOOLBAR, ON_USERCOMMAND Methods. Clicking on that push button, a new screen has to be displayed.

    Hi,
            Assuming that you want to have a "push-button" column, i.e. push-buttons within an ALV grid then you need to implement the following steps:
    (1) Set the style of the column as button
      ls_fcat-style = CL_GUI_ALV_GRID => MC_STYLE_BUTTON.
    (2) When the user pushes the button event BUTTON_CLICK is triggered. Thus, define an appropriate event handler method.
    <b>Reward points</b>
    Regards

  • How to Add C3PO Toolbar Buttons with GroupWise in C#

    Hello
    i try How to Add C3PO Toolbar Buttons with GroupWise in C#. I do all like
    i read here
    http://support.novell.com/techcenter...a20000906.html
    But i can see any result
    i create file with Wizard(witout project)
    Then i add this file to my EXE project
    and add 2 button "Reg C3PO"(RegC3po();) and "Unreg C3PO"(UnRegC3po();)
    and init
    what i do wrong?
    i try find ansver but find only this
    http://newsportal.novell.com/article...sup.gwc3po#925
    what its mean?
    news:SR%Zg.16416$[email protected]:
    about this question
    http://newsportal.novell.com/article...sup.gwc3po#673
    C3POs still don't work in the address book?
    Kirill

    Kirill wrote:
    > Hello and Merry Chritmas :)
    >
    > regsvr32 onlu for DLL. My project create EXE file :(
    >
    > Kirill
    Ups......
    You'll, according to the readme generated by your C3PO Wizard, have to run
    Regasm.exe <your C3PO server>
    That will create the needed regkeys...
    Also, you might have to add the typelib wrapper and assambly to the GAC, bu typing:
    Gacutil -i <your C3PO server>
    Best Regards
    Tommy Mikkelsen
    IT Quality A/S
    Denmark
    Novell Developer Forums SYSOP
    Please Report back any success or failure, That way we all learn
    Sorry, but no support through email
    "I hate bugs".......Tommy Lee Jones, MIB
    Be a GroupWiseR, go http://www.groupwiser.net

  • How do I add a close button to an item in a NavigationPane

    We are creating tabs (commandNavigationLink) dynamically for a NavigationPane that are driving data in a set of iframes. We are using the tabs to show and hide the iframes which really works well.
    My issue is that I cannot figure out how to put a close buton on a commandNavigationLink. As this is the only component allowed in a NavigationPane I am at a standstill.
    I am starting to look at extended the ADF components to add this capability, however this does not seem trivial at this point.
    Any thoughts???

    I had another idea that I am pursuing. I am looking into extending the current renderer CommandNavigationRenderer and will render another goLink just after the current goLink that will execute a close action. I was able to re-direct the rendering by added an override render-kit block in my current faces-config.xml file.
    <render-kit>
    <renderer>
    <component-family>org.apache.myfaces.trinidad.Command</component-family>
    <renderer-type>oracle.adf.rich.NavigationItem</renderer-type>
    <renderer-class>com.riscs.ui.backing.jsp.components.ClosableCommandNavigationItemRenderer</renderer-class>
    </renderer>
    </render-kit>
    If this works I am planning on extending the commandNavigationItem by creating a ClosableCommandNavigation tag and add a "closeAction" tag that will determine if a close item should render.
    Preliminary work looks promising. I will update if I make progress...please let me know if I am crazy.
    Thanks.

  • How to Hide FPM Close button

    Hi,
    I have created one FPM application. When that application is called from portal, an aditional button 'CLOSE' is appearing.
    I did not put that button to FPM application and when I test the application from R/3, the button is not appearing. But it appears on portal. How hide this close button ?
    (I have also posted the same message to FPM Forum.)
    Thanks in advance..
    Vikrant

    Hi,
    1 Open WDC FPM_GAF_COMPONENT.
    2 Go to Web Dynpro Application -> <Application> -> Applic. Configurations.
    3 Copy <Aplication config> to some u2018Zu2019 Application Configuration name and save as local object.
    4 Open that application in admin mode and copy the URL.
    5 Add that copied URL to some role so that it can be displayed in Portal or NWBC by taking care of parameter u2018sap-config-        mode=Xu2019 must be in URL.
    6 Open that application in Portal or in NWBC.
    7 Right click in Contextual navigation area.
    8 Select u2018Setting for Current Configurationu2019.
    9 Here set the u2018Closeu2019 button visibility as u2018INVISIBLEu2019

  • How to add a new button in IC tool bar and handle the event for the button?

    Hi,
        I am working on CRM 2007 Interaction center. To add a new button to IC toolbar, customizing is available to define a new button and then assign in to the profile.
    In SPRO->CRM->IC webclient->Customer Specifc System Modifications->Define Toolbar Buttons, I defined one new button with ID ZSTART.
    Now in SPRO->CRM->IC webclient->Basic Functions->Communication Channels->Define Toolbar Profiles , I selected Default profileid and in Generic Layout Buttons Tab, I added the new button ZSTART in Position 3.
         So after completing the customizing when the user logs in using role IC_AGENT,  the button (with ID:ZSTART) gets displayed in the IC toolbar too.
          Now on click of this button, I need to create an object.
    To do so, I have to catch the event which is raised by this new button.
           Please let me how to implement the event handler for this new button. What will be the event name for this button click event and how I can subscribe for it ?
         Please let me know if anyone of you have already worked on similar requirements.
    Regards,
    Manas.
    Edited by: manas sahoo on Jul 22, 2008 7:49 PM

    Hello Manas,
    There are a couple of threads in the community that might help you out (if you haven't already found them):
    Re: IC Web Client Toolbar
    /message/3621917#3621917 [original link is broken]
    Regards,
    Renee Wilhelm
    Edited by: Renee Wilhelm on Nov 6, 2008 7:46 PM

  • How to add a Font Button in the Top of the Help File

    Dear all,
    In some of the Help Files (HTML Help), i've seen a Font
    button being added in the top of the Help File (for e.g next to
    Home button)...when we click this font button, the font size of the
    Content present in the Help File Increases/decreases
    accordingly....how to add this button in our Help File.
    At present i'm creating a HTML Help using Adobe 6..Kindly let
    me know, if there are any options...
    Thanks with regards

    Hi usureka
    Take a look at the following link. It should guide you.
    click
    here
    Cheers... Rick

  • How to add a push button in ALV Grid Top-of-page

    Is it possible to add a push button to the top-of-page in Alv grid display?if yes, then how? I am not using OO ABAP and am using reuse_alv_grid_display with top-of-page event.

    Hi,
    I am not sure whether we can add push button in top-of -page or not. But instead of that if you want to add button on toolbar as per your requirement then follow below link. it will useful.
    http://www.sap-img.com/abap/example-of-a-simple-alv-grid-report.htm
    Ram.

  • How to add the push button on the apllication tollbar of IL02 tcode

    Hi Friends,
    I have to add the push button on the application tool bar of the IL02.when that push button is pressed then some operation to be performed.Could you please suggest how to add.Is there any screen exit if yes what is that.
    With out screen exits if there is any way ?
    Thanks and regards,
    shyla

    HI Vicky ,
                      if u want an interactive ALV report , there are lot of forums already having the solution for that , but let me give u the solution anyway.
    In the function module "REUSE_ALV_GRID_DISPLAY" , import parameters
         I_CALLBACK_PF_STATUS_SET          = 'FLIGHT'
         I_CALLBACK_USER_COMMAND           = 'BUTTON_CLICK'
    has to be supplied to this function module . The PF status is where u hav created the two buttons , that PF status has to be given here .If the user clicks on the button then it is handled by the form routines . Inside the sub-routine based on the button the user has selected u could perform the action.
    FORM FLIGHT    USING RT_EXTAB TYPE SLIS_T_EXTAB.
      SET PF-STATUS 'FLIGHT' EXCLUDING RT_EXTAB.
    ENDFORM.
    Here the "Flight" is the PF_status .
    FORM BUTTON_CLICK USING UCOMM type SY-UCOMM
                           SELFIELD type SLIS_SELFIELD.
      CASE UCOMM.
        WHEN 'BUTTON!' .
    write ur code for button 1.
      WHEN "BUTTON"
      *Write ur code for button2 .
    end case.
    endform.
    for any queries reply back.
    regards

  • How to add "child data" button in Personal information

    Hi guys , I m a portal consultant , we are EHP4 portal and ECC 6 in R/3...
    In personal Information > Family members/Dependents> there is no Add child tab is there to enter the details of the children...... how to add this??
    please help me .......

    Hi sidhu
    have check the tab called "new child" button there you can create the children s
    OR check the country specific iview
    Go to content admin> content provided by sap>end user >EH3> iview -->check the specific iview
    Hope this is help to you.
    Thanks& Regards
    G.srinu
    Edited by: gorlisrinu on Nov 10, 2011 10:29 AM

  • How to make a close button in Captivate 5

    I am using Captivate 5 and trying to create a close button. I have found this Creating a Close Demo Button in Adobe Captivate, however when I follow it I don't have the '...' button to input my javascript.
    Any advice would be great.
    Thanks.

    Hi There,
    Click on the "Script_Window" to add the Java Script. The above Demo is for Captivate 4 i believe and has been replaced with "Script_Window" in the later version.
    Regards,
    Mayank

Maybe you are looking for