How to add a column in existing DTW template

Dear Expert,
I want to add a column which is in table structure of JDT1 but in DTW template that column is not there...
In my JDT1 table that column has some value and i want that value to be enter thru DTW ..
Give me step because at some stage i m making mistake....i know..
please help me
Thanks
Kevin

In JE DTW there is not proficode column, but i want that column to be loaded ?
even i try by "target table" but still nt able to load of "profitcode" in that way
How to add an existing column which is there in JDT1 table but not in JE DTW template ?
Thanks
Kevin

Similar Messages

  • How to add one column in existing search help.

    Hi Folks,
    My quesion is
    How to add one column in existing search help and also Now search help on that field is not an explicit search help. It should be implement using check table.
    Shivam

    Hi,
    If you want to add a field in Elementary search help, get the search help name for the and go to change mode and add the field in it.
    If you want to add a field in collective search help, go to included search helps tab and a new search help name and add the fields to it.
    I think this should help you to certain extent.
    Regards,
    Kranthi
    Edited by: Kranthi on Jan 14, 2010 11:15 AM

  • How to add subpartitions to the existing subpartition template

    Hi All,
    My Question is ,how to add Subpartition to the exiting subpartition template. e
    like i have created a table with subpartition template with with 5 subpartitions like
    subpartiton one_1 value (121)
    subpartition two_2 value(122)
    and now i one to add one more subpartitin to the existing subpartition template(Like modify the existing subpartition templete).
    subpartition three_3 value(123)
    Could any suggest me.
    Thanks
    Sree

    >
    My Question is ,how to add Subpartition to the exiting subpartition template.
    >
    Follow the example in the section for 'Modifying a Subpartition Template' in the VLDB and Partitioning Guide
    http://docs.oracle.com/cd/E11882_01/server.112/e25523/part_admin002.htm#i1007904
    >
    You can modify a subpartition template of a composite partitioned table by replacing it with a new subpartition template. Any subsequent operations that use the subpartition template (such as ADD PARTITION or MERGE PARTITIONS) now use the new subpartition template. Existing subpartitions remain unchanged.
    If you modify a subpartition template of an interval-* composite partitioned table, then interval partitions that have not yet been created use the new subpartition template.
    Use the ALTER TABLE ... SET SUBPARTITION TEMPLATE statement to specify a new subpartition template. For example:
    ALTER TABLE emp_sub_template
    SET SUBPARTITION TEMPLATE
    (SUBPARTITION e TABLESPACE ts1,
    SUBPARTITION f TABLESPACE ts2,
    SUBPARTITION g TABLESPACE ts3,
    SUBPARTITION h TABLESPACE ts4

  • HOW TO ADD NEW COLUMN IN EXISTING QUERY

    hi,
    i m working on oracle reorts 10g. i have a multiple query based report. now i want to add a new column in query 1 and order by on that new column .
    i added column in query but when i see that group i dont find that column in that group.wt do i need to do to visible that column in query1 group thats y the order by on that column is not working i think.
    tell how to solve it ?
    thanks

    Hi,
    The new column you have added might be in the least level group of that query.
    Drag it to the desired group level, first postion and set the break order for that item in the property pallette..
    (If still the item not coming, check whether you have put 'comma' in the select query after writing the column name)
    Simply giving the column in the order-by clause will not work in report.
    In Report, record display order is completely based on the break-order of the items given in query-groups
    If you change accordingly it will work
    Regards
    Dora

  • FBL5N : how to add a column of the Account's name?

    Hi,
    the list displayed by Tcode : FBL5N contain only the number of account, please how to add a column of Account's name ?
    Please advise
    Regards.

    When you are in the FBL5N display results screen, use the menu option Settings --> Special Fields. 
    There are also the following notes which would explain you how to add special or new fields to the line items :
    - 310886     Line items: Dynamic selections ignored
    - 215798     FBL*N: Special fields are not displayed
    - 373268     Line item: new display field
    The special field has to exist in table T021S.

  • HOW TO: Add /manipulate columns for a GridControl

    HOW TO: Add /manipulate columns for a GridControl when the columns (attributes) are from different entity objects.
    This HOWTO describes the basic steps of using attributes from different entity objects for a GridControl.
    One way you can create a GridControl which contain attributes from different entity objects is to create a view object and base it on the entity objects which contain
    the desired attributes.
    Here are the basic steps:
    1.Create a new view object (or use an existing view object) by selecting File>New from the menu, clicking the Business Components tab and double-clicking
    on the View Object icon.
    2.In the View Object wizard change the name to something meaningful.
    3.Select the entity objects you will base your view object on.
    4.Nivigate to the attribute screen and select the attributes you would like to include in your view object from each entity object. At this point you can also create
    a new attribute by clicking the "New" button. The new attribute can be a concatenation of other attributes, derived from a calculation etc.
    5.In the query panel of the View Object wizard, click "Expert mode" and enter a query statement. You write complex queries such as decoding a set of attribute
    values.
    6.Add your newly to your newly created view object to the application module by double-clicking on the application module in the navigation pane and selecting
    your view object from the list.
    7.Create a new row set.
    8.Bind row set to a query by editing their queryinfo property and selecting your view object and its attributes from the queryInfo pane.
    9.Create a GridControl and bind it to the row set by editing the dataItemName property of the GridControl. Since the GridControl is bound at the row set level
    all of the related attributes are automatically added.
    null

    Michael,
    Are you intending this as a commercial solution or a work around?
    To take an existing equivalent, one would build a view in the database tailored for each grid in an Oracle Forms application. Or a separate query layered over tables for each form/grid in a Delphi or Access application? Even if it is ninety nine percent the same over half a dozen forms/grids?
    And now you've added a whole slew of "slightly different" rowSetInfos to maintain.
    So if you wanted to add a column that needs to appear everywhere... you've just increased the workload multi-fold?
    That would be a management nightmare, wouldn't it? Not to mention yet more performance cost and a slower system?
    Hmmmm..... I'm not sure I like where this is headed... someone needs to do some convincing...
    null

  • How to add new columns in predefined matrix  in system form

    Hi all,
    I am new to SAP B1. I am going to add New column to Good Receipt PO matrix. I faced the one error " Matrix Line Exists " While adding new column to good receipt PO matrix".
    =========================================================
    Private Sub SBO_Application_ItemEvent(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef BubbleEvent As Boolean) Handles SBO_Application.ItemEvent
                 oMat = oForm.Items.Item("38").Specific
                   oCols = oMat.Columns
                    oCol = oCols.Item("U_MyCol")
            If pVal.EventType = SAPbouiCOM.BoEventTypes.et_FORM_LOAD And pVal.BeforeAction = True And pVal.FormType = "143" Then
                Try
                    oForm = SBO_Application.Forms.Item(pVal.FormUID)
                    oMat = oForm.Items.Item("38").Specific
                    oCols = oMat.Columns
                    'oCol = oCols.Item("U_MyCol1")
       oCol = oCols.Add("U_MyCol1", SAPbouiCOM.BoFormItemTypes.it_EDIT)
                    oCol.TitleObject.Caption = "Qty Accepted"
                    oCol.Width = 40
                    oCol.Editable = True
                    oCol = oCols.Item("U_MyCol1")
                Catch ex As Exception
                    SBO_Application.MessageBox(ex.Message)
                End Try
            End If
    oDBDataSource = oForm.DataSources.DBDataSources.Add("PDN1")
            ''oEdit.DataBind.SetBound(True, "PDN1", "U_QtyAccepted")
    ============================================================
    And i also added for Datasource to Databind. what there is no result ??i wanted Clear information regarding this to add new columns in matrix in  middle of Matrix items. I wanted Clear coding& information for this to add new Columns in Matrix ?help me regarding this asap??
    Regards
    ANAND

    Anand,
    If you use the "search" feature of this forum and type "add column", you will find many posts that may help you such as this one ...
    How to add a column on sales order matrix?
    HTH,
    Eddy

  • How to add a column in table control

    Hi ,
       Can any one tell me how to add a column in table control? My requirement is to add two columns ( custom fields ) into table control ( It is a standard program). I have added the column in the table and also in the table control. But when I am running the standard program, The newly added column is not there. But I have added in the perticular screen. Change is not reflected.
       Can anyone help me on this please.
    Thanks in advance.
    Regards,
    Lakshmi.

    Hi,
    Ensure the following :
    1. After adjusting the database, you`ll have to use the database utility and activate the table.
    2. If you have changed the standard screen, in tcode se80 -- right click on the program and click activate all. This activates all objects related to that program.
    Now execute the program.
    Reward if helpful.
    Regards

  • How to add different columns in a single dashboard prompt?

    Hi
    I am new to this forum. I got a new requirement, my client is asking me to show multiple columns with multiple tables in a single dashboard prompt
    for Ex: Column name Table name
    1. Customer 1. Customer Details
    2. Market 2. Region
    3. Order 3. Order Status
    4. Product 4. Product Type
    He wants to show all these column names in a single prompt when user click on the particular column name it should appear on report. Is it Possible? if possible tell me how?

    See this thread...
    Re: How to add new columns by using Multiselect

  • How to add two columns in OBIEE report?

    Hi to All,
    Can anyone tell me how to add two columns in OBIEE report and get that result in a new column?
    Thanks in Advance,
    Thenmozhi

    Assume you already have two columns SalesAmt1 and SalesAmt2, and you want to derive 3rd column say SalesAmt3 which would be the sum of SalesAmt1 and SalesAmt2.
    For this, as I mentioned above pull SalesAmt1 and SalesAmt2 columns in Report. Now pull another column (say SalesAmt1) and open the fx. Clear the contents of fx. Now locate the columns button in the bottom of the fx. From Here, first select SalesAmt1 and + sign and the select SalesAmt2.
    Now in this new column, the fx should look like SalesAmt1 + SalesAmt2.
    Let me know if you are looking for something else.
    Thanks

  • How to add blank page to existing Document In Adobe Dc

    how to add blank page to existing Document In Adobe Dc Pro

    Hi thashrifs16749461,
    You can add a blank page using Adobe Acrobat DC by following the below instructions :-
    1) Open your existing pdf document in Acrobat DC.
    2) Choose the 'Organize Page' option form the Tools pane on the right as shown below in the screen shoot.
    3) Now at the top you will see all the tools to Organize the page, Click on 'Insert' & select 'Blank Page' from the drop-down to insert blank pages.
    *Shortcut : If you are using windows computer you can use ' Shift+Ctrl+T ' key to insert blank pages.
    In case if you experience any issue or have any query please let us know. We will be happy to help you.
    Regards,
    Aadesh

  • Office 365 - sharepoint: In Advanced search Page, How to add custom column under property restrictions

     In Advanced search Page, How to add custom column under property restrictions?

    Hi,
    The Navigation control can be added into your HTML page in the Snippet Gallery:
    The two links below about how to create HTML master page and adding snippets needed into it for your reference:
    http://borderingdotnet.blogspot.jp/2012/12/how-to-create-html-masterpage-for.html
    http://msdn.microsoft.com/en-us/library/office/jj822370(v=office.15).aspx
    Feel free to reply if there still any question.
    Best regards,
    Patrick
    Patrick Liang
    TechNet Community Support

  • How to add multiple columns?

    Using designer API, how to add multiple columns to the repository tables? I want to add number of columns at a time instead of adding column by column.
    Thanks in advance.

    Can you use sqlplus?
    ALTER TABLE table_name ADD (column_name data_type), (Column_name datatype),...
    Check the SQL Reference 11-9.
    Hope this helps.
    Bill Swanson

  • How to add one column to the standard t.code : CAT2.

    Hi,
    How to add one column to the standard t.code : CAT2.
    thanks

    Hi Chinna
    see the  enhancements by using SMOD <b>CATS0007</b> , or <b>CATS0012</b> and create a project using CMOD and you can implement your requirement.
    Hope This Info Helps YOU.
    <i>Reward Points If It Helps YOU.</i>
    Regards,
    Raghav

  • How to add new column in screen painter

    Hi
             I have try to add new column on existing screen and test screen in se51, the column is added in position correctly. But when I run program call this screen, the added column is placed as the last column.
    Please help.
    Thanks

    Thank for your replied.
              I have check the table control, it has fix column. So, I set fix column to 0 at table control but when execution by program call it's still not update what I have changed. (On test screen in se51, it come out correctly and updated)
    So, I don't know why I use program call this screen, the screen is not updated what I have try to change but, when execute in test screen it come out correctly
    PS. I have check attribute, it's numbered right.
    Please help !!
    Edited by: VerdamFK on Oct 4, 2010 8:11 AM

Maybe you are looking for