How to add a dynamic filter in query panel

I want to display the data in recent week, is it possible to add a dynamic filter in query panel?
eg. filter--> actionDate >= CurrentDate - 7
BO version: BOX I 3.1

We are still trying to get this filter to work. Can anybody give us an example of how it should look on the sensor?
The sensor filter that we would like to create should exclude any source IP, any source port to specific destination hosts on all destination ports (icmp has none) from capturing events and storing them in the event store on the sensor.
This is the filter that we have so far on the sensor. Whats the problem with it?
service event-action-rules rules0
filters edit icmp-w-echo-filter-sensor-sensor-0-D
signature-id-range 2100
subsignature-id-range 0-255
attacker-address-range 0.0.0.0-255.255.255.255
victim-address-range a.b.c.x,a.b.c.y
attacker-port-range 0-65535
victim-port-range 0-65535
risk-rating-range 0-100
no actions-to-remove
deny-attacker-percentage 100
filter-item-status Enabled
stop-on-match False
no user-comment
exit
filters move icmp-w-echo-filter-sensor-sensor-0-D begin
exit

Similar Messages

How to add column dynamically based on user input in oracle?

**how to add column dynamically based on user input in oracle?**
I am generating monthly report based on from_date to to_date below is my requirement sample table
EMPLOYEE_CODE| Name | CL_TAKEN_DATE | CL_BALANCE | 01-OCT-12 | 02-OCT-12 | 03-OCT-12
100001.............John...........02-OCT-12...............6
100002.............chris...........01-OCT-12...............4
Based on user input, that is, if user need the report from 01-OCT-12 TO 03-OCT-12, i need to add that dates as column in my table, like 01-OCT-12 | 02-OCT-12 | 03-OCT-12....
below is my code
create or replace
procedure MONTHLY_LVE_NEW_REPORT_demo
L_BUSINESS_UNIT IN SSHRMS_LEAVE_REQUEST_TRN.BUSINESS_UNIT%TYPE,
--L_LEAVE_TYPE_CODE IN SSHRMS_LEAVE_REQUEST_TRN.LEAVE_TYPE_CODE%TYPE,
L_DEPARTMENT_CODE IN VARCHAR2,
--L_MONTH IN SSHRMS_LEAVE_REQUEST_TRN.LVE_FROM_DATE%TYPE,
L_FROM_DATE IN SSHRMS_LEAVE_REQUEST_TRN.LVE_FROM_DATE%TYPE,
L_TO_DATE in SSHRMS_LEAVE_REQUEST_TRN.LVE_TO_DATE%type,
MONTHRPT_CURSOR OUT SYS_REFCURSOR
AS
O_MONTHRPT_CURSOR_RPT clob;
v_return_msg clob;
BEGIN
IF (L_BUSINESS_UNIT IS NOT NULL
AND L_FROM_DATE IS NOT NULL
and L_TO_DATE is not null
-- AND L_DEPARTMENT_CODE IS NOT NULL
THEN
OPEN MONTHRPT_CURSOR FOR
select EMPLOYEE_CODE, EMPLOYEE_NAME AS NAME, DEPARTMENT_CODE AS DEPARTMENT,DEPARTMENT_DESC, CREATED_DATE,
NVL(WM_CONCAT(CL_RANGE),'') as CL_TAKEN_DATE,
case when NVL(SUM(CL2),0)<0 then 0 else (NVL(SUM(CL2),0)) end as CL_BALANCE,
from
SELECT DISTINCT a.employee_code,
a.EMPLOYEE_FIRST_NAME || ' ' || a.EMPLOYEE_LAST_NAME as EMPLOYEE_NAME,
a.DEPARTMENT_CODE,
a.DEPARTMENT_DESC,
B.LEAVE_TYPE_CODE,
B.LVE_UNITS_APPLIED,
B.CREATED_DATE as CREATED_DATE,
DECODE(b.leave_type_code,'CL',SSHRMS_LVE_BUSINESSDAY(L_BUSINESS_UNIT,to_char(b.lve_from_date,'mm/dd/yyyy'), to_char(b.lve_to_date,'mm/dd/yyyy'))) CL_RANGE,
DECODE(B.LEAVE_TYPE_CODE,'CL',B.LVE_UNITS_APPLIED)CL1,
b.status
from SSHRMS_EMPLOYEE_DATA a
join
SSHRMS_LEAVE_BALANCE C
on a.EMPLOYEE_CODE = C.EMPLOYEE_CODE
and C.STATUS = 'Y'
left join
SSHRMS_LEAVE_REQUEST_TRN B
on
B.EMPLOYEE_CODE=C.EMPLOYEE_CODE
and c.EMPLOYEE_CODE = b.EMPLOYEE_CODE
and B.LEAVE_TYPE_CODE = C.LEAVE_TYPE_CODE
and B.STATUS in ('A','P','C')
and (B.LVE_FROM_DATE >= TO_DATE(L_FROM_DATE, 'DD/MON/RRRR')
and B.LVE_TO_DATE <= TO_DATE(L_TO_DATE, 'DD/MON/RRRR'))
join
SSHRMS_LEAVE_REQUEST_TRN D
on a.EMPLOYEE_CODE = D.EMPLOYEE_CODE
and D.LEAVE_TYPE_CODE in ('CL')
AND D.LEAVE_TYPE_CODE IS NOT NULL
group by EMPLOYEE_CODE, EMPLOYEE_NAME, DEPARTMENT_CODE, DEPARTMENT_DESC, CREATED_DATE
else
v_return_msg:='Field should not be empty';
end if;
END;
my code actual output
EMPLOYEE_CODE| Name | CL_TAKEN_DATE | CL_BALANCE
100001....................John............02-OCT-12.................6
100001....................chris...........01-OCT-12.................4
how to add column dynamically based on from_date to to_date?
Thanks and Regards,
Chris Jerome.

You cannot add columns dynamically. But you can define a maximum number of numbers and then hide unused columns in your form useing SET_ITEM_PROPERTY(..,VISIBLE, PROPERTY_FALSE);

How to add Image dynamically in Webdynpro ABAP

Hi Experts,
How to add Image dynamically in Webdynpro ABAP.
My requirement is i maintain all the images in a table.
image source has to pick the table URl dynamically and display.
is that possible in webdynpro?
and also please give the suggesion,
without using MIME objects is that anyway to get images?
Thanks in advance.
Regrads,
Jeyanthi

Hi,
are those icons wou want to display then. he following code will be useful.
data : lo_IMG type ref to CL_WD_IMAGE.
LO_IMG = cl_wd_IMAGE=>new_IMAGE( id = img_id SOURCE = 'ICON_BW_APD_TARGET' tooltip = sts_tltp ).
lo_cont->add_child( the_child = lo_img ).
here lo_cont is the container where you want to add the image dynamically and source is the attribiute through which you can change the ICON image. this thing you can getit from data base table and change accordingly.
Regards,
Anil kumar G

How to add join conditions in ABAP Query.

Hi,
I need a help on "ABAP Query".
How to add join conditions in ABAP Query.
Thanks in advance.
Thanks & Regards,
Ramana

Hi,
See below code,
*& Report ZRNP_ALV_SO
REPORT zrnp_alv_so MESSAGE-ID z7rnp .
INCLUDE zrnp_include .
*SELECTION SCREEN                                                      *
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-004 .
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln ,
                s_auart FOR v_auart ,
                s_vkorg FOR v_vkorg ,
                s_spart FOR v_spart ,
                s_kunnr FOR v_kunnr ,
                s_matnr FOR v_matnr .
SELECTION-SCREEN END OF BLOCK blk1 .
*AT SELECTION SCREEN                                                   *
AT SELECTION-SCREEN.
SELECT SINGLE vbeln
                 FROM vbak INTO vbak-vbeln
                 WHERE vbeln IN s_vbeln.
IF sy-subrc <> 0.
    MESSAGE e202.
ENDIF.
*START OF SELECTION                                                    *
START-OF-SELECTION .
PERFORM data_select.
PERFORM t_sort USING i_sort .
PERFORM event_cat USING i_event .
PERFORM fld_cat USING i_fldcat[] .
PERFORM t_layout USING i_layout .
PERFORM fld_cat2 USING i_fldcat2[] .
PERFORM call_alv.
* DATA SELECT                                                          *
*&      Form DATA_SELECT
*       text
* --> p1        text
* <-- p2        text
FORM data_select .
REFRESH: it_vbfa, it_so1, it_del_ful ,it_del1 .
BREAK-POINT.
*SELECT*
        *a~vbeln*
        *a~auart*
        *a~vkorg*
        *a~spart*
        *a~kunnr*
        *b~posnr*
        *b~matnr*
        *c~maktx*
        *b~kwmeng*
        *b~vrkme*
        *INTO TABLE it_so1 FROM vbak AS a*
              *INNER JOIN vbap AS b ON b~vbeln = a~vbeln*
              *INNER JOIN makt AS c ON c~matnr = b~matnr*
              *AND c~spras = sy-langu*
              *WHERE a~vbeln IN s_vbeln .*
IF sy-subrc = 0.
    SORT it_so1 BY vbeln.
    DELETE ADJACENT DUPLICATES FROM it_so1.
ENDIF.
* COLURING DISPLAY                                                     *
DATA: ld_color(1) TYPE c .
* LOOP AT it_so1 INTO wa_so.
* Populate color variable with colour properties
* Char 1 = C (This is a color property)
* Char 2 = 3 (Color codes: 1 - 7)
* Char 3 = Intensified on/off ( 1 or 0 )
* Char 4 = Inverse display on/off ( 1 or 0 )
*           i.e. wa_ekko-line_color = 'C410'
*    ld_color = ld_color + 1.
* Only 7 colours so need to reset color value
*    IF ld_color = 8.
*      ld_color = 1.
*    ENDIF.
*    CONCATENATE 'C' ld_color '10' INTO wa_so-line_color.
** wa_ekko-line_color = 'C410'.
*    MODIFY it_so1 FROM wa_so.
* ENDLOOP .
* IF sy-subrc = 0.
IF NOT it_so1[] IS INITIAL.
    SELECT vbelv
           posnv
           vbeln
           posnn
           vbtyp_n
           INTO TABLE it_vbfa
           FROM vbfa
           FOR ALL ENTRIES IN it_so1
           WHERE vbelv = it_so1-vbeln
           AND   posnn = it_so1-posnr
           AND vbtyp_n ='J' .
    IF sy-subrc = 0.
      SELECT vbeln
             posnr
             matnr
             werks
             lgort
             charg
             lfimg
             vrkme
             FROM lips INTO TABLE it_del_ful
             FOR ALL ENTRIES IN it_vbfa
             WHERE vbeln = it_vbfa-vbeln
             AND   posnr = it_vbfa-posnn.
    ENDIF.
ENDIF.
ENDFORM.                    " DATA_SELECT
**************** EVENT CATALOG ****************************************
*&      Form EVENT_CAT
*       text
*      -->P_I_EVENT text
FORM event_cat USING    p_i_event TYPE slis_t_event .
REFRESH p_i_event .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
* EXPORTING
*   I_LIST_TYPE           = 0
   IMPORTING
      et_events             = p_i_event
* EXCEPTIONS
*   LIST_TYPE_WRONG       = 1
*   OTHERS                = 2
* IF sy-subrc <> 0.
** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
**         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
* ENDIF.
READ TABLE p_i_event WITH KEY name = slis_ev_top_of_page INTO t_event.
IF sy-subrc = 0.
    MOVE 'TOP_OF_PAGE' TO t_event-form.
    MODIFY p_i_event FROM t_event INDEX sy-tabix TRANSPORTING form.
ENDIF.
CLEAR t_event .
ENDFORM.                    " EVENT_CAT
**********FORM FOR EVENT TOP_OF_PAGE**********************************
FORM top_of_page .
REFRESH i_listheader.
DATA: t_header TYPE slis_listheader.
DATA: v_text(50).
WRITE sy-datum TO v_text.
CLEAR t_header.
t_header-typ = 'S'.
t_header-key = "Date".
t_header-info = v_text.
APPEND t_header TO i_listheader.
CLEAR t_header.
CLEAR v_text.
WRITE: 'SALES ORDER & DELIVERY DETAILS REPORT ' TO v_text .
t_header-typ = 'S'.
t_header-key = 'TITLE'.
t_header-info = v_text.
APPEND t_header TO i_listheader.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = i_listheader.
*      I_LOGO             = 'ALV_BACKGROUND'.
*   I_END_OF_LIST_GRID       =
ENDFORM.                    "TOP_OF_PAGE
******** FIRST ALV GRID DISPLAY ***************************************
FORM call_alv .
* FORM TO MAKE THE CELL CONTENTS INVISIBLE.
* PERFORM INVISIBLE_CELL_CONTENTS. *
*EXCLUDE-DECLARATION.
CLEAR wa_exclude.
wa_exclude-fcode = '&VEXCEL'.
APPEND wa_exclude TO i_exclude.
*&      Form CALL_ALV
*       text
* --> p1        text
* <-- p2        text
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = sy-repid
*    I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
     i_callback_user_command           = 'USER_COMMAND1'
     i_callback_top_of_page            = 'TOP_OF_PAGE'
     i_background_id                   = 'ALV_BACKGROUND'
     is_layout                         = i_layout
     it_fieldcat                       = i_fldcat[]
     it_excluding                      = i_exclude
     it_sort                           = i_sort
     it_events                         = i_event
    TABLES
     t_outtab                          = it_so1
* IF sy-subrc <> 0.
** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
**         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
* ENDIF.
ENDFORM.                    " CALL_ALV
************** FIRST FIELDCATALOG *************************************
*&      Form FLD_CAT
*       text
*      -->P_I_FLDCAT[] text
FORM fld_cat USING    p_i_fldcat TYPE slis_t_fieldcat_alv.
CLEAR i_fldcat.
i_fldcat-fieldname   = 'VBELN'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname     = 'IT_SO1'."TABLE NAME
i_fldcat-seltext_m   = 'SALES ORDER NO.'.
i_fldcat-col_pos     = 1.        " POSITION OF THE COLUMN.
i_fldcat-outputlen   = 20.       " SET THE OUTPUT LENGTH.
i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-hotspot     = 'X'.
i_fldcat-just(1)     = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname   = 'AUART'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname     = 'IT_SO1'."TABLE NAME
i_fldcat-seltext_m   = 'SALES DOC. TYPE'.
i_fldcat-col_pos     = 2.        " POSITION OF THE COLUMN.
i_fldcat-outputlen   = 15.       " SET THE OUTPUT LENGTH.
i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1)     = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname   = 'VKORG'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname     = 'IT_SO1'.
i_fldcat-seltext_m   = 'SALES ORG.'.
i_fldcat-col_pos     = 3.        " POSITION OF THE COLUMN.
i_fldcat-outputlen   = 12.       " SET THE OUTPUT LENGTH.
i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1)     = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname   = 'SPART'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname     = 'IT_SO1'.
i_fldcat-seltext_m   = 'DIVISION'.
i_fldcat-col_pos     = 4.        " POSITION OF THE COLUMN.
i_fldcat-outputlen   = 10.       " SET THE OUTPUT LENGTH.
i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1)     = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname   = 'KUNNR'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname     = 'IT_SO1'.
i_fldcat-seltext_m   = 'SOLD TO PARTY'.
i_fldcat-col_pos     = 5.        " POSITION OF THE COLUMN.
i_fldcat-outputlen   = 15.       " SET THE OUTPUT LENGTH.
i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1)     = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname   = 'POSNR'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname     = 'IT_SO1'.
i_fldcat-seltext_m   = 'SALES DOC. ITEM'.
i_fldcat-col_pos     = 6.        " POSITION OF THE COLUMN.
i_fldcat-outputlen   = 17.       " SET THE OUTPUT LENGTH.
i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1)     = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname   = 'MATNR'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname     = 'IT_SO1'.
i_fldcat-seltext_m   = 'MATERIAL NO.'.
i_fldcat-col_pos     = 7.        " POSITION OF THE COLUMN.
i_fldcat-outputlen   = 20.       " SET THE OUTPUT LENGTH.
i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1)     = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname   = 'MAKTX'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname     = 'IT_SO1'.
i_fldcat-seltext_m   = 'DESCRIPTION'.
i_fldcat-col_pos     = 8.        " POSITION OF THE COLUMN.
i_fldcat-outputlen   = 20.       " SET THE OUTPUT LENGTH.
i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1)     = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname   = 'KWMENG'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname     = 'IT_SO1'.
i_fldcat-seltext_m   = 'QUANTITY'.
i_fldcat-col_pos     = 9.        " POSITION OF THE COLUMN.
i_fldcat-outputlen   = 15.       " SET THE OUTPUT LENGTH.
i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-do_sum    = 'X'.        " For doing "SUM"
i_fldcat-just(1)     = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname   = 'VRKME'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname     = 'IT_SO1'.
i_fldcat-seltext_m   = 'SALES UNIT'.
i_fldcat-col_pos     = 10.       " POSITION OF THE COLUMN.
i_fldcat-outputlen   = 10.       " SET THE OUTPUT LENGTH.
i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1)     = 'C'.
APPEND i_fldcat.
ENDFORM.                    " FLD_CAT
****************** ALV SORTING ***************************************
*&      Form SORT
*       text
*      -->P_I_SORT text
FORM t_sort USING    p_i_sort TYPE slis_t_sortinfo_alv .
DATA: i_sort TYPE slis_sortinfo_alv .
REFRESH p_i_sort .
CLEAR i_sort.
i_sort-spos = 1.
i_sort-tabname = 'IT_SO1'.
i_sort-fieldname = 'VBELN'.
i_sort-up = 'X'.
i_sort-subtot = 'X'.
i_sort-group = '*'.
APPEND i_sort TO p_i_sort.
ENDFORM.                    " SORT
*FORM SET_PF_STATUS USING rt_extab TYPE slis_t_extab.
* SET PF-STATUS 'ZSTANDARD'.
*ENDFORM. "Set_pf_status
***********FORM FOR EVENT USER_COMMAND1********************************
FORM user_command1 USING r_ucomm LIKE sy-ucomm
                         rs_selfield TYPE slis_selfield.
*CASE R_UCOMM .
*    WHEN '&IC1' .
*    IF rs_selfield-FIELDNAME = 'VBELN' .
*    ENDIF .
* WHEN OTHERS .
* ENDCASE .
CLEAR wa_so.
REFRESH: it_del1 .
IF r_ucomm = '&IC1' AND rs_selfield-fieldname = 'VBELN' AND
rs_selfield-value IS NOT INITIAL.
    READ TABLE it_so1 INTO wa_so INDEX rs_selfield-tabindex.
    IF sy-subrc = 0.
      LOOP AT it_vbfa INTO wa_vbfa WHERE vbelv = wa_so-vbeln
                                   AND   posnv = wa_so-posnr.
        READ TABLE it_del_ful INTO wa_it_del_ful
             WITH KEY vbeln = wa_vbfa-vbelv
                      posnr = wa_vbfa-posnn.
        IF sy-subrc = 0.
          CLEAR wa_del.
          MOVE wa_it_del_ful TO wa_del.
          APPEND wa_del TO it_del1.
        ENDIF.
      ENDLOOP.
    ENDIF.
ENDIF.
********* SECOND ALV GRID DISPLAY ***********************************
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
    i_callback_program                = sy-repid
*   I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
    i_callback_user_command           = 'USER_COMMAND2'
    i_callback_top_of_page            = 'TOP_OF_PAGE'
    i_background_id                   = 'ALV_BACKGROUND'
    it_fieldcat                       = i_fldcat2[]
    it_sort                           = i_sort
    TABLES
    t_outtab                          = it_del_ful
* IF sy-subrc <> 0.
** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
**         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
* ENDIF.
ENDFORM .                    "USER_COMMAND1
********** FORM FOR EVENT USER_COMMAND 2 ******************************
FORM user_command2 USING r_ucomm LIKE sy-ucomm
                         rs_selfield TYPE slis_selfield.
CLEAR wa_so.
REFRESH: it_del1 .
IF r_ucomm = '&IC1' AND rs_selfield-fieldname = 'VBELN' AND
rs_selfield-value IS NOT INITIAL.
    READ TABLE it_so1 INTO wa_so INDEX rs_selfield-tabindex.
*    IF SY-SUBRC = 0.
*       LOOP AT it_vbfa INTO wa_vbfa WHERE vbelv = WA_SO-vbeln
*                                    AND   posnv = WA_SO-posnr.
    READ TABLE it_del_ful INTO wa_it_del_ful
         WITH KEY vbeln = rs_selfield-value
                 " vbeln = wa_vbfa-vbeln
                  posnr = wa_vbfa-posnn.
    IF rs_selfield-fieldname = 'VBELN'.
      SET PARAMETER ID 'VL' FIELD wa_vbfa-vbeln .
      CALL TRANSACTION 'VL03' AND SKIP FIRST SCREEN.
    ENDIF .
*       ENDLOOP.
*    ENDIF.
ENDIF.
ENDFORM .                    "USER_COMMAND2
********* SECOND FIELDCATALOG ******************************************
*&      Form FLD_CAT2
*       text
*      -->P_I_FLDCAT2[] text
FORM fld_cat2 USING    p_i_fldcat2 TYPE slis_t_fieldcat_alv .
CLEAR i_fldcat2.
i_fldcat2-fieldname   = 'VBELN'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-tabname     = 'IT_DEL_FUL'."TABLE NAME
i_fldcat2-seltext_m   = 'DELIVERY NO.'.
i_fldcat2-col_pos     = 1.        " POSITION OF THE COLUMN.
i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-hotspot     = 'X'.
i_fldcat2-just(1)     = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname   = 'POSNR'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m   = 'DELIVERY ITEM'.
i_fldcat2-col_pos     = 2.        " POSITION OF THE COLUMN.
i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1)     = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname   = 'MATNR'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m   = 'MATERIAL NO.'.
i_fldcat2-col_pos     = 3.        " POSITION OF THE COLUMN.
i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1)     = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname   = 'WERKS'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m   = 'PLANT.'.
i_fldcat2-col_pos     = 4.        " POSITION OF THE COLUMN.
i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1)     = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname   = 'LGORT'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m   = 'ST. LOCATION'.
i_fldcat2-col_pos     = 5.        " POSITION OF THE COLUMN.
i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1)     = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname   = 'CHARG'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m   = 'BATCH NO.'.
i_fldcat2-col_pos     = 6.        " POSITION OF THE COLUMN.
i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1)     = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname   = 'LFIMG'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m   = 'ACT. DEL. QTY.'.
i_fldcat2-col_pos     = 7.        " POSITION OF THE COLUMN.
i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1)     = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname   = 'VRKME'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m   = 'SALES UNIT.'.
i_fldcat2-col_pos     = 8.        " POSITION OF THE COLUMN.
i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1)     = 'C'.
APPEND i_fldcat2.
ENDFORM.                                                    " FLD_CAT2
***************** ALV LAYOUT *******************************************
*&      Form LAYOUT
*       text
*      -->P_I_LAYOUT text
FORM t_layout USING    p_i_layout TYPE slis_layout_alv .
p_i_layout-zebra = 'X'.
p_i_layout-totals_text = 'GRAND TOTAL ='.
* p_i_layout-CONFIRMATION_PROMPT = 'X'.
* p_i_layout-DEF_STATUS = ' '.
p_i_layout-info_fieldname = 'LINE_COLOR'.
ENDFORM.                    " LAYOUT

How to add a parameter to sql query in report

Hi
How to add a parameter to sql query in report.
Parameter is from Visual studio
example:
select * from tab1 where dl=parameter???
I have VS 2008 prof CR XI R2, mysql

Hello,
If you have this API available then you can modify the record selection formulae in code to add filtering:
string recordSelectionFormula = "{T_INV_RPT_ADDR.IND_PROMUS} = {?P_PROMUS?} AND {T_INV_RPT_POINT.INVOICE_DATE} = DATE(2008, 05, 31) AND {T_INV_RPT_POINT.CHECKOUT_DATE} = date(2008, 04,29)";
CrystalDecisions.CrystalReports.Engine.ReportDocument.RecordSelectionFormula = recordSelectionFormula;
You have to format and follow the rules as in the Designer so not too much work to get this to work.
CR for .NET may not have the ability so you will need to upgrade to a Developer version of Crystal Reports.
Thank you
Don

How to add a new filter in an existing web service method (BIWS - WEBI document)

Hello Experts, we have 7 web service query's connected to a dashboard. Basically it is one WSDL URL and 7 Get Methods...Web service queries are BIWS (via WEBI document instance). There are filters setup for each of these web service methods.
Recently there was a request to add 2 new fields to the webi document and also the 2 fields need to be included as filters in the 7 methods. I know there is an option to edit the method, but when i edit the method, i cannot find the 2 new fields in list to set as filters.Can anybody help me understand how to add filters to an existiing web service method? I do not want to delete the method and republish the block as web service.
Any help will be great and points rewarded.
Thank you
Ann

Hi Ann,
The reason you are not able to see any of the new columns as a option to select in your web service block is because when you have published that block, they were not present. Add these two new objects in your block and publish it again. You will be prompted for duplication content. Select the highlighted block for duplicate and now you can see the new added objects in the filter option. Update and this will overwrite your published block. Please note, web services do appear to behave weirdly when used with dashboards so I request you to please try it in a separate test report first.
Hope that helps.
Regards,
Tanisha

How to add a new filter in existing BIWS (WEBI) for dashboard consumption

Hello Experts, we have 7 web service query's connected to a dashboard. Basically it is one WSDL URL and 7 Get Methods...Web service queries are BIWS (via WEBI document instance). There are filters setup for each of these web service methods.
Recently there was a request to add 2 new fields to the webi document and also the 2 fields need to be included as filters in the 7 methods. I know there is an option to edit the method, but when i edit the method, i cannot find the 2 new fields in list to set as filters.Can anybody help me understand how to add filters to an existiing web service method? I do not want to delete the method and republish the block as web service.
Any help will be great and points rewarded.
Thank you
Ann

Hi Ann,
You can create a new WebServices or modify the document block on which the webservices is published.
Once the block is modified you might be able to see the new objects in the filters.
Thanks,
Amit

How to add a alert filter in ipsmc for version 5 signatures

I am trying to understand how event or alert filters work in version 5.x. If I use VMS ipsmc to manage the sensors, how do you add a sensor filter for a particular event that we do not want to see appear in the SecMon console any more.
It looks like you have one of two options however i am not sure of the method to follow. you could edit the signature its self or it seems that you must use Configuration Settings > Event Actions (IPS 5.x) > SigEvent Action Filters
I would like to create a filter from any to a single address host IP address but when I select the add button, I only have the option to specify a range of addresses. Do I just enter the single address in the start field and then leave the finish field blank?
The filter should not alert or take any action. How do I exclude certain destination or source IPs from producing an alert?

We are still trying to get this filter to work. Can anybody give us an example of how it should look on the sensor?
The sensor filter that we would like to create should exclude any source IP, any source port to specific destination hosts on all destination ports (icmp has none) from capturing events and storing them in the event store on the sensor.
This is the filter that we have so far on the sensor. Whats the problem with it?
service event-action-rules rules0
filters edit icmp-w-echo-filter-sensor-sensor-0-D
signature-id-range 2100
subsignature-id-range 0-255
attacker-address-range 0.0.0.0-255.255.255.255
victim-address-range a.b.c.x,a.b.c.y
attacker-port-range 0-65535
victim-port-range 0-65535
risk-rating-range 0-100
no actions-to-remove
deny-attacker-percentage 100
filter-item-status Enabled
stop-on-match False
no user-comment
exit
filters move icmp-w-echo-filter-sensor-sensor-0-D begin
exit

HOW TO ADD NEW COLUMN IN EXISTING QUERY

hi,
i m working on oracle reorts 10g. i have a multiple query based report. now i want to add a new column in query 1 and order by on that new column .
i added column in query but when i see that group i dont find that column in that group.wt do i need to do to visible that column in query1 group thats y the order by on that column is not working i think.
tell how to solve it ?
thanks

Hi,
The new column you have added might be in the least level group of that query.
Drag it to the desired group level, first postion and set the break order for that item in the property pallette..
(If still the item not coming, check whether you have put 'comma' in the select query after writing the column name)
Simply giving the column in the order-by clause will not work in report.
In Report, record display order is completely based on the break-order of the items given in query-groups
If you change accordingly it will work
Regards
Dora

Query: How to add new fields in ABAP query?

Hi All,
Can any one tell me how to add new fields in the ABAP query output?
We have to add the new fields using query design or we have
to add those in the background program(automatically generated behind query) by selecting new fields in the code?

What kind of report? Usually, you have to add the field in the table declaration and then also in the SQL query. After that, include the field in what kind of report you are using.

How to add new fields in SAP-Query

Hi,
Can any body tell how to add new fields to the existing query.
Thanks a lot,
Bhaskar.

hi,
when we create internal tables like. in final table you can include the extra fields.
data : begin of itab_mara,
         matnr like mara-matnr,
         erdat like mara-erdat,
         end of itab_mara.
data : begin of itab_marc,
         matnr like marc-matnr,
         werks like marc-werks,
         end of itab_marc.
data : begin of itab_final,
         matnr like mara-matnr,
         erdat like mara-erdat,
         werks like marc-werks,
         date like sy-datum,
         status(10) type c, * new fields
         end of itab_final.
<select statement>.
Append all the fields to itab.
loop at itab_final.
write :/ itab_final.
endloop.
Reward with points if helpful.
Message was edited by:
        Vinutha YV

How to set a dynamic filter to a prompted one?

Hello:
I have a dashboard prompt whose values determine the columns for a constructed dynamic filter column using case statement.
There is another dashboard prompt whose value determine the the values for the dynamic filter column.
I have a need to set this dynamic filter to the operator 'is prompted'. According to the OBIEE documentation, the requirement for 'is prompted' filter is to have the dashboard prompt column match with the filter column.
I currently use a presentation variable for the dashboard prompt column that gives the filter value.
How do I make my dynamic filter to be prompted (for pre-filtering results as a default behavior) and subsequently use the presentation variable (derived from the dashboard prompt) if a user enters the appropriate prompt values?
Here is an example:
Dashboard prompt: Location Type-> (State, District, City) (The case statement on my filter determines the appropriate logical column State or District or City)
Filter Value: Dallas (pv1)
The dynamic filter will generate "City" = '@{pv1}' (Dallas in the above example)
I want this dynamic filter to be set to 'is prompted' for pre-filtering results as a default behavior.
Thanks for reading this far and looking forward to your suggestions.
Regards
Sankar Bala

Please read this carefully, you may find what you are looking for:
Dynamic dashboard prompts and columns used in multifunctional report, full guided navigation
http://108obiee.blogspot.com/2009/08/dynamic-dashboard-prompts-and-columns.html
Or this one:
http://obiee101.blogspot.com/2009/04/obiee-dynamic-prompt-content.html
Regards
Goran
http://108obiee.blogspot.com

How to Add the Dynamic List Wizard Form to a Spry Accordion Panel?

Is it possible to add ADDT Dynamic Forms to the Spry Widgets?
- I have been trying to add the Dynamic List Wizard to my existing Accordion but everytime I do, the Accordion turns into plain text?
-Also, If it is possible then how do I target the Panels and have the detail record open up in Panel number 2?
I plan on having the ADDT Dynamic Form in Panel 1, and want the Add, Edit, New, Delete form to open up in Panel 2.
Thanks for your help,
jlig

I figured this out.
1) First add all the Fields to the Form using the ADDT Insert Record Form Wizard.
2) View the ADDT form in the browser to make sure the fields all display.
3) In DW design view, move the cursor just to the left of the ADDT Form and hit Enter to Add a line just above the ADDT Table.
4) With the cursor below the Red Form line and just above the ADDT table add the SPRY widget. (ex..Tabs)
5) Now highlight the rows you want to move & hit Cut, then open up Tab1, highlight Content1 and hit Paste.
I decide to leave my date_added, modified_By & date_modified fields below the SPRY tab widget so that these fields are visible all the time. When I click on the Insert button, the record was added correctly to my Table after Validation passed.
Thanks,
jlig

How to add System variable in a Query

Hi Experts,
In ref. to the below query.
(SELECT T0.[CardCode], T0.[CardName], T0.[DocNum],T0.[Installmnt], T0.[DocDate], T0.[DiscPrcnt], T0.[DiscSum], T0.[DocTotal] FROM [dbo].[OINV] T0 WHERE T0.[CardName] = [%0] )
Can you please let me know how to add a System Variabe (i.e., AR Invoice --> Total before discount field --> Variable : 85) to the above query.
Thanks in advance
Regards,
Rakesh N

Hi Rakesh......
Its definitely possible.
Try this one....
(SELECT T0.[CardCode], T0.[CardName], T0.[DocNum],T0.[Installmnt], T0.[DocDate], T0.[DiscPrcnt], T0.[DiscSum], T0.[DocTotal], Sum(T1.LineTotal) , T3.DocNum
FROM [dbo].[OINV] T0 Inner Join INV1 T1 On T0.DocEntry=T1.DocEntry Left Outer Join RIN1 T2 On T1.DocEntry=T2.BaseEntry Left Outer Join ORIN T3 On T3.DocEntry=T2.DocEntry
WHERE T0.[CardName] = [%0]
Group By T0.[CardCode], T0.[CardName], T0.[DocNum],T0.[Installmnt], T0.[DocDate], T0.[DiscPrcnt], T0.[DiscSum], T0.[DocTotal], T3.DocNum
Hope this will help you.......
Regards,
Rahul

How to Add a Servlet Filter to Reports 11.1.1.2.0

I am running Fusion Middleware 11g (Weblogic 10.3.2), with Oracle Forms/Reports 11.1.1.2.0. The installation is running the default managed servers WLS_FORMS and WLS_REPORTS.
How can I add a Servlet Filter to the Reports 11.1.1.2.0 application which is running under the WLS_REPORTS managed server?
I have read the Oracle Doc ID: 418366.1, which describes a process for adding a servlet filter to Reports Developer 10.1.2.2, but I am unclear as to which web.xml file I need to modify in weblogic and where to place the class file for the servlet filter.
Thanks in advance for your help.

I can provide some partial help.
The set up I have was running it locally on Windows 7 (64 bit) laptop and running the reports server (version 11.1.1.4) in XP Mode as part of Windows 7 Professional.
To find which web.xml file to change, I searched the directories for web.xml and then removed then renamed the web.xml files to something else to see which impacted the start up of the reports server.
It turns out it was a web.xml file in web.war file in the following directory which impacted the start up:
C:\Oracle\Middleware\user_projects\domains\ClassicDomain\servers\WLS_REPORTS\tmp\_WL_user\reports_11.1.1.2.0\1ww4ab
So used winzip to extract files, update web.xml file and and java class as a jar file in the WEB-INF\lib directory and zipped back up to a web.war and put it in the above directory and restarted the Reports Server.
Note the url pattern I used was slightly different to that shown in the oracle note (forward slash before asterix):
<url-pattern>/rwservlet/*</url-pattern>
Have not investigated how to do in for a production environment, but hopefully this information is of use.
Les.

How to add a dynamic filter in query panel

Similar Messages

Maybe you are looking for