How to add a feild as key combination for existing condition table

Hi all,
please any body can inform me about how to add a feild as key combination for existing condition table ex 901 having the key combination of sales organisation and material
for this cond. table,how to add a new feild ex:price list
iam unable to add it in change mode of v/03.(even after removing this 901 table from Acc.seq.)
Edited by: rajendraprasad vasam on Apr 25, 2008 10:08 AM

mr.Rajendra
I you have the access key - you can copy the 901 table and create a new table along with your required field. v/03
Or
in the access sequence for the condition type - add 1 more step and add your field.
ie 10 - 901
and in 20 - your required field
regards,
Reshmi
Edited by: reshmi bhaskar on Apr 25, 2008 10:21 AM

Similar Messages

Key combination for tax condition record

Dear Experts,
I want to create new key combination for creating a condition record for a particular condition type for tax code using T CODE FV11,
please tell me what is T CODE TO Create key combination ,
Thanks in advance

1.Create Table in V/03
2.Assign to access sequence in OBQ2

Steps to assign new key combination to existing output type

Hi,
Can anyone share details about how to create a new key combination for existing output type.
Regards,
Dharmesh

Dear Dharmesh,
Go to:
IMG - Sales and Distribution - Basic Functions - Output Control - Output Determination - Output Determination Using the Condition Technique - Maintain Output Determination for Sales Activities - Maintain Condition Tables -
Maintain output condition table for sales activities
Click on 'Condition" from the Menu Bar. Then select "Create" from drop down menu.
Give a Table Number & press Enter.
Here select the required Feild from Feild Catalogue & Click on Generate.
Then goto:
IMG - Sales and Distribution - Basic Functions - Output Control - Output Determination - Output Determination Using the Condition Technique - Maintain Output Determination for Sales Activities - Maintain Access Sequences
Here Click on the required Access Sequence & then click on "Accesses' on the right side. Here you can assign the newly created Condition Table at required level (10, 20, 30 etc)...
Sebsequently try maintaing condition record & you will see the new Key Combination appearing.
Hope this helps.. .
Thanks,
Jignesh Mehta

How to add an feild to a segment to an existing idoc sturucture?

how to add an feild to a segment to an existing idoc sturucture?
please help me out with the step step by process...
thnaks and regards,
anu

Hi
use the WE31 Tcode to edit the segment
see the following steps
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
>>>> SAP ALE & IDOC<<<<
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
Create a Customer Distribution Model (CDM);
Add appropriate message types and filters to the CDM;
Generate outbound partner profiles;
Distribute the CDM to the receiving systems; and
Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
Regards
Anji

"Country/Region/Plnt Region" key combination for JVRD

Dear Guru
We are using this key combination for JVRD. When I check the condition analysis for my PO, the record shows that
Country = IN
Region = !
Plnt Region = !.
I checked my vendor master address and the plant already updated with Region in the address.
Where else do I need to checked?
Thanks in advance.

Hi,
Please check in FV12 how these values showing...
if they are fine...check in the table t001w...
Hope it helps
Kuber

How to add a new universe in population for Predictive Analysis

Post Author: izhar
CA Forum: Performance Management and Dashboards
Hi all members I am working on BOXI R2, SP2 I have to ask that, How to add a new universe in population for "Predictive Analysis". Currently i can only view universe of "Direct Customers and Direct Products"
Any member please help me hereRegards Izhar

Hi Anne,
It really depends on how your portal is set up. And there are 101 ways this could have been done.
I've used the Home Page Framework as an easy to define and extend framework to show applications. I've used it both for ESS and MSS, Using the HPF requires that an application has an iView in the portal.
The main point to be made here is that this is not a Web Dynpro ABAP specific question - but rather one about MSS portal implementation - you would probably be better posting a question in either one of the ESS/MSS or Portal forums.
As it is not a WDA specific question, I'd ask that you kindly close this thread and reopen in another forum.
Thanks for your understanding, it would be nice to be able to answer all questions in all forums (perhaps with some sort of tagging system) but currently forum rules are that questions must be specific to the forum posted.
Thanks,
Chris

FRM-40735 Error when trying to add an employee as key member for a project

FRM-40735: ON Insert trigger raised unhandled exception ORA-06502 in PAXPREPR when trying to add an employee as key member for a project
Tried generating FND log messages to see if it shows any error messages but it didn't show any specific error.

Error ORA-06502 says PL/SQL: numeric or value error.
The Error could be in the data already exist in the system for key members. If this Project was created using APIs, there are possibilities that some other character( i.e. next line chracter ) got entered in the column value which Form "PAXPREPR" is not able to fetch or update.
You can query the key member data from back-end to check if any data corruption is there. you may require data-fix to correct that.
AB

Repricing of Custom Field used in Key combination for Pricing

Hi,
we have created a custom field and this field is being used in the Key combination for Pricing. For standard fields we all know that the pricing condition is repriced once the value of the key field is changed in the document automatically (not manual update)
The problem with this having the custom field in the Key combination is that when this fiel value is changed in the document the condition is not repriced automatically. We need to Do the price update manually for determining the new condition value.
Request you to help in solving the issue. Do explain the things to be carried out for automatic pricing for the Custom fields added.
Thank you in advancd.
Regard
Kula

Hi Kulasekar,
I think you have to implement Badi CRM_COND_COM_BADI, update communication structure with updated value from transaction should do reprice.
Hope this helps!!!

Add a new field to an existing Condition table

How can I add a new field to an existing condition table?
I have table 971 and I want to add INCOTERMS (INCO1) to this existing table but do not see how to add it.
Thanks

Hi Vicky,
I dont think you can add new fields to the condition table once you have activated the condition table.
SAP says you can only make limited changes to the condition table, like changing the description, fast entry screen, header and footer fields, but not able to add new fields to the table, and I think that is the correct approch or else for the same table you will have two sets of condition records.
Please refer to the below link:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/de/7a8534c960a134e10000009b38f83b/frameset.htm
What you can do is create a new condition table with additional field and assign this table before the currently used table in the access sequence.
Hope this helps.
Regards
Raj

Primary key constraint for index-organized tables or sorted hash cluster

We had a few tables dropped without using cascade constraints. Now when we try to recreate the table we get an error message stating that "name already used by an existing constraint". We cannot delete the constraint because it gives us an error "ORA-25188: cannot drop/disable/defer the primary key constraint for index-organized tables or sorted hash cluster" Is there some sort of way around this? What can be done to correct this problem?

What version of Oracle are you on?
And have you searched for the constraint to see what it's currently attached to?
select * from all_constraints where constraint_name = :NAME;

HOW to enable oracle advance compression for EXIST partitioned table

Hi All,
I have to enable oracle advance compression for existing table which PARTITION BY RANGE then SUBPARTITION BY HASH.
ORacle version: 11.2.0.2.0
Please provide me any relevant doc or any exp.
Thanks in advance.

could not see any text for how to enable oracle advance compression for EXIST partitioned table.RTFM.
From the resource above:
How do I compress an existing table?
There are multiple options available to compress existing tables. For offline compression, one could use ALTER TABLE Table_Name MOVE COMPRESS statement. A compressed copy of an existing table can be created by using CREATE TABLE Table_Name COMPRESS FOR ALL OPERATIONS AS SELECT *. For online compression, Oracle’s online redefinition utility can be used. More details for online redefinition are available here.
"

How to add unit to calculated key figures in BEx

How to add unit to BEx calculated key figures in SAP BW BEx?
I would like to add a unit to a calculated key figure in SAP BW BEx, so that it gets visible on the end user level. Currently the unit field is empty. I calculated the value from various key figures with different units and removed the units with the NODIM()-function. Is there an inverse function to NODIM() with which you can add a specific unit (like EUR or TAG).
The "How tou2026 Report Data in Alternate Units of Measure" does not seem to cover the point.
"Quantity Conversion Guide for SAP Business Intelligence" refers to the "Conversion" tab.
I suppose you have to add a conversion routine, which is 1:1 and sets the target unit defined in BEx.
Has anyone tried this? Is there a more simple solution?
OLAP-Quantity Conversion:
http://help.sap.com/saphelp_nw70/helpdata/EN/27/b65c42b4e05542e10000000a1550b0/frameset.htm

Hi,
if your CKF will have always same unit and you have one KF in you inforpovider with this unit, you can try to do this trick
create a new hidden CKF as new CKF = KF / KF (with this equale new CKF = 1 unit)
change your old CKF as old CKF = old CKF * new CKF
let me know if it works.

Key combination for condition record

Hi,
I am trying to create condition record for tax code using tcode FV11.
I have enter condition type as JMOP.
but in key combination it is not showing Tax classification
how can I add this key combination.
Please help.
Regards,
vijay

Hi,
The Access sequence JTax should be the access sequence of the Tax condition types .
Financial accounting > Tax on Sales/ Purchases> Basic settings
Then using the FV11 for the Tax condition types, the access sequence " Tax classification " can be used.
Thanks & Regards,
Amjad

New key combination for access sequence

hi,
i have an active access sequence called ZBMP. There is 2 key combinations to the access sequence
5 materail / plant
10 material
I need to add a new key combination
15 - material / Pant / Distribution Channel
to the access sequence.
Can someone please help.
Regards

Hi,
Step 1: Go to V/03 and create a table with key fields(material / Pant / Distribution Channel) or Use the existing standard table.
Note the created table number.
Step 2: Go to V/07 and select your previous Access Sequence and Double click on the Access field under Dialogue structure. click new entries and specify the new table number with step number (Created in step:1).
Step 3: Now select the Line item and double click on Fields. Ignore the warning by pressing Enter Key.
Now do save.
Step 4: Check your Access sequence. New table would be added.
Hope it helps.
Regards,
A.Govin

How to add A single row at the middle of the table in a Webi report

Hi,
I created a Webi report using Universe(Created universe using bex query).Now i have a requirement to display a row at the middle of a report. Can you please tell me ,how to add a sigle row at the middle of a Webi report.
Thanks in advance
Regards
Monika

Hi Monika,
It is not really possible to add a row (I assume you mean of unrelated data) to the middle of a table in a report. You can add a new table with a single row between two tables. For instance you could add a new one row table, or even single cells which are positioned relatively between two tables. Possibly a block on top of another. But this gets tricky.
Can you explain in more detail what you are trying to do?
Thanks

How to add a feild as key combination for existing condition table

Similar Messages

Maybe you are looking for