How to add a field in data entry section of cat2 transaction

hi friends,
i just want to know how i can add one more field in the data entry section of the cat2 transaction.would appreciate if u help me asap.
thanks,
sakshi

Did you solve this?

Similar Messages

PLz Help me its urgent, how to add new field in mm01 basic data screen

Hi everyone,
plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
Thanks,
murali.

Hi Murali,
when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
reward if useful.
thanks
abdulsamee.

How to add new fields in asset master data

Hello,
i was wonder if anyone knows how to add new fields that arent defined in the asset master data.
Thanks.
Pedro

Hi Pedro,
SAP allows entering upto 8 fields on the asset master. These fields are called 'Evaluation group'. Out of 8, 4 are four character long and others are 8 character long.
You can configure them @ the following 3 nodes in IMG:
Financial Accounting>Asset Accounting>Master Data-->User Fields: Define 4-Character Evaluation Groups & Define 8-Character Evaluation Groups & Change Key Words in the Evaluation Groups.
Regards,
Vishal Thakur

REG: How to add new fields to existing Infospoke

Hi All,
We have an existing Infospoke, It has ODS as a Source and some fields are being pulled.
But here is the scenario....
I need some extra fields that are available in other ODS. How to add that fields ?
By some research came to know that.. I need to lookup on the ODS and populate into existing Infospoke.How to add these fields to InfoSpoke using BAdi implementaion.
Note: already BAdi is active in the infospoke.
Please help me in this regard

Hi Chase,
As you mentioned that BADI is already implemented then I guess you should be able to extend the existing BADI itself.
For doing lookup first you should know the key fields of source DSO then by using the existing field of Infospoke you will have to read data from DSO.
DATA: it_data type standard table of 'DSO Name'.
select Key1 key2 etc...
          Field1 Field2 Field3 Field4
          from DSO
          into table it_data
          for all entries of infospoke
         where key1 = infospoke1-key1
                     key2 = infospoke2-key2.
This will give you all the required records from source DSO into internal table it_data. Now you using this table you can populate the original table of Infospoke.
Regards,
Durgesh.

How to Add parameter fields in BI publisher fields

Hi,
I'm creating xml report for Apps standard Trial Balance Summary, here i cant able to run the .rdf locally due to SRW.UserExit .
So i got the XML file from output of the report.
Then i added the xml data in BI publisher and then i have created the .rtf for that.
Here i need to add some fields which is not available in fields list (in BI Publisher).
How to add that fields, or is possible to add fields manually.
That fields are given as parameters while running the .rdf file.
Please tell me how to solve this problem.
Is possible to add fields manually means tell me how to do that.

If those fields are input parameters to the concurrent program then you can display them in RTF by declaring and printing it as
<?param@begin:P_CONC_PARAM?>
and display it as <?$P_CONC_PARAM?> - Note P_CONC_PARAM should match your parameter token

How to add new fields to j1is transaction

hi,
i need to add new fields to the entry screen transaction j1is, or at least i want to change the discription which is showed in aditional data screen line data1,data2,data3.
is it possible to change those with out having access key.
thanq,
rajesh.k

hi,
yes, i was poor in exits side i heard their is no need of accesskey if user exit was available for that transaction but hear i didn't find any screen exits, did u know any screen exits.
did any one know where the additional data in j1is was effect?
thanq,
rajesh.k
this was placed as answer but my qustion not answered please consider it as un answered and send ur valuebul suggessions.

How to add new fields to the system form (Ex.expenses to a/r invoice form)

hi
can any one tell me how to add new fields to the system form (Ex.expenses to a/r invoice form)
i want to add expenses field to system a/r invoice form and connect data base also.
i used the code of samples\11.system form manipulation(vb.net) but i'm not able to get it....so can any one help with code or concepts.
reply soon plz..
thankQ

If I understood you correctly, you are just trying to add new fields to the invoice form and then use them in your form. you should first go and add the field to your tables, which you would do by going to Tool --> User Defined Fields --> Manage User Fields. There are different documents or categories given. For ex. for invoices, Sales Orders you would add your field under the Marketing Documents. If you want the field to be just one per invoice, add it to the Title, otherwise if you want a field per invoice or Sales Order line, add it to the Rows section. Once you have done that then you can just create a edit box or drop down to represent the field and set the datasource for that to your field. If you want example code to do that, let me know.

How to add new fields in SAP-Query

Hi,
Can any body tell how to add new fields to the existing query.
Thanks a lot,
Bhaskar.

hi,
when we create internal tables like. in final table you can include the extra fields.
data : begin of itab_mara,
         matnr like mara-matnr,
         erdat like mara-erdat,
         end of itab_mara.
data : begin of itab_marc,
         matnr like marc-matnr,
         werks like marc-werks,
         end of itab_marc.
data : begin of itab_final,
         matnr like mara-matnr,
         erdat like mara-erdat,
         werks like marc-werks,
         date like sy-datum,
         status(10) type c, * new fields
         end of itab_final.
<select statement>.
Append all the fields to itab.
loop at itab_final.
write :/ itab_final.
endloop.
Reward with points if helpful.
Message was edited by:
        Vinutha YV

How to add new field XREF3 in FB50

Hi,
I have a problem with adding the new field XREF3 in FB50 transaction in Items window. I configured field status group in OBC4 and OB41 transaction for XREF3 as optional entry. XREF3 is available in FB01 transaction but not in FB50. I checked table settings for Item window in FB50 using Administrator button. Field XREF3 is not displayed in current settings window. I checked also that structure ACGL_ITEM include the field XREF3. Can you give me any advice how to add the field XREF3 in this enjoy transaction FB50 ?
Thanks in advance.
Zbigniew Debowski

hi,
start FB50!
at the upper right corner of the items, there is a small coloured box (blue, yellow and white), click on it
click Administrator in the popup
search for XREF3 in the list, the field Invisible (last coloum) should be ticked, untick it!
click Activate, than Close, than Close again
hope this helps
ec

How to Add IBAN Field in the Bank Details Infotype?

Hello All,
I need to know the procedure for How to add IBAN field in the bank details infotype?
Could anyone help me please.
I m new to SAP HR.
Immediate help will be appreciated.
Thanks.
Regards,
Mudassir.Imtiaz

Hi mudassir,
For IBAN implementation:
1. Implement SAP Notes 925410, 1409674, 1405521
2. Go to t-code FIBF - From menu select Settings - P/S Modules - of an SAP Application - Create entry
For Turkey we've added the following entry (depends on country) :
00003040 TR CONVERT_IBAN_2_BANK_ACCOUNT_TR
3. Go to V_T588M for module pool MP000900 and screen 2000 select IBAN & Q0009-IBAN00 fields as standard.
4. Go to table T77S0 and make value of ADMIN IBAN entry S.
Regards,
Dilek

Using Authorization group field in Data entry profile

Hi,
I would need some help in configuring/using the authorization group field in data entry profile.
After setting up the values in the drop down, how do we link to the authorization profiles or roles .
basically, I would like to know the steps/activities required to use this field

cross posting->thread locked.

How to add new field into dynamic internal table

Hello Expert.
how to add new field into dynamic internal table.
PARAMETERS: P_TABLE(30).    "table name
DATA: I_TAB TYPE REF TO DATA.
FIELD-SYMBOLS: <TAB> TYPE standard TABLE.
*Create dynamic FS
create DATA I_TAB TYPE TABLE OF (p_table).
ASSIGN I_TAB->* TO <TAB>.
SELECT * FROM (p_table) INTO TABLE <TAB>.
   here i want to add one more field into <TAB> at LAST position and my
   Field name = field_stype     and
   Field type    = 'LVC_T_STYL'
could you please helpme out .

Hi,
Please find the code below.You can add the field acc to your requirement.
Creating Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE, u201C Dynamic internal table name
               <fs_dyntable>,                     u201C Field symbol to create work area
               <fs_fldval> type any.              u201C Field symbol to assign values
PARAMETERS: p_cols(5) TYPE c.                     u201C Input number of columns
DATA:   t_newtable TYPE REF TO data,
        t_newline TYPE REF TO data,
        t_fldcat   TYPE slis_t_fldcat_alv,
        t_fldcat   TYPE lvc_t_fcat,
        wa_it_fldcat TYPE lvc_s_fcat,
        wa_colno(2) TYPE n,
        wa_flname(5) TYPE c.
Create fields .
DO p_cols TIMES.
    CLEAR wa_it_fldcat.
    move sy-index to wa_colno.
    concatenate 'COL'
                wa_colno
           into wa_flname.
    wa_it_fldcat-fieldname = wa_flname.
    wa_it_fldcat-datatype = 'CHAR'.
    wa_it_fldcat-intlen = 10.
    APPEND wa_it_fldcat TO t_fldcat.
ENDDO.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = t_fldcat
    IMPORTING
      ep_table        = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
Populating Dynamic internal table
DATA: fieldname(20) TYPE c.
DATA: fieldvalue(10) TYPE c.
DATA: index(3) TYPE c.
DO p_cols TIMES.
    index = sy-index.
    MOVE sy-index TO wa_colno.
    CONCATENATE 'COL'
                wa_colno
           INTO wa_flname.
Set up fieldvalue
    CONCATENATE 'VALUE' index INTO
                fieldvalue.
    CONDENSE    fieldvalue NO-GAPS.
    ASSIGN COMPONENT wa_flname
        OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
    <fs_fldval> = fieldvalue.
ENDDO.
Append to the dynamic internal table
APPEND <fs_dyntable> TO <t_dyntable>.
Displaying dynamic internal table using Grid.
DATA: wa_cat LIKE LINE OF fs_fldcat.
DO p_cols TIMES.
    CLEAR wa_cat.
    MOVE sy-index TO wa_colno.
    CONCATENATE 'COL'
                wa_colno
           INTO wa_flname.
    wa_cat-fieldname = wa_flname.
    wa_cat-seltext_s = wa_flname.
    wa_cat-outputlen = '10'.
    APPEND wa_cat TO fs_fldcat.
ENDDO.
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      it_fieldcat = fs_fldcat
    TABLES
      t_outtab    = <t_dyntable>.

How to add more fields at level task for importing to MsProject

Hi everyone,
We would like to have the same number of fields either for importing as exporting; or at least, the fields that we need.
The problem is when we are configurating the fields for exporting from cProjects to MsProject, we found 81 available fields and then we don't find the same amount for importing (34). So, in some cases we don't find fields which were configurated for exporting and it is no posible to upload the information back because the field is no available for importing.
Does anyone knows how to add more fields for importing at the cProjects side?
Thanks a lot,
CAMILO URIBE

Some fields can not be migrated because of MsProject designe. The above is the reason why cProjects' customizing does not offer the
mapping of the same nuember of fields.

How to add new fields in Reduced message ( in BD53 )

Hi Experts,
How to add new fields in Reduced message ( in BD53 ), when the required field iis available in Table or Structure and need to be added in BD53 so that we can ALE.
Thanks,
Ninad

Hello,
I think of something like:
First, you create extension, with transaction WE30.
Then, reduce your idoc, your extension should also be proposed.
Do not forget to add this extension in outbound we82, and/or we57 in inbound, and WE20, and find BTE or exit to populate extension.
regards.
F.S.

How to add New field in SMART forms.

How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

How to add a field in data entry section of cat2 transaction

Similar Messages

Maybe you are looking for