How to add a field in line layout configuration for Tcode F-28
Hi friends,
I have a requirement where i need to add a field in line layout 'K1'.
The field is EXNUM - ( Official Excise Document Number ) from the table J_1IEXCHDR into the existing Line layout 'K1'.
I am not able to add this field under line layout configuration,since this field does not exist in field list.
I have been searching for the suitable enhancement,but not able to locate one.
It would be really helpful if someone share some info regarding this issue.
No configuration is available at transaction code o7z4s
No enhancement is available
Even validations (OB28) and substitutions (OBBH) will not work since this will use BSEG/BKPF tables /ABAP System Fields
You need to go for Z program by copying the existing program of F-28 and add your required field with the help of Abaper.
Srinivas
Similar Messages
-
How to add a field in the layout of cs11
Hi,
i want to add a field in the layout of cs11,
i tryed with user exits and badis as below but i am unable to find the solution .
BOM_EXIT
BOM_UPDATE
CEWB_BOM_CUS_FIELDS (SCREEN ENHANCEMENT WITH BOM HEADER)
CEWB_BOM_UPDATE
CEWB_ITM_CUS_FIELDS (SCREEN ENHANCEMENT WITH BOM ITEM)
PCSD0001 Applications development R/3 BOMS
PCSD0002 BOMs: Customer fields in item
PCSD0003 BOMs: Customer fields in header
PCSD0004 BOM comparison
PCSD0005 BOMs: component check for material items
PCSD0006 Mass changes user exit
PCSD0007 Check changes in STKO
PCSD0008 WBS BOM: Customer-specific explosion for creating
PCSD0009 Order/WBS BOM, determine URL page
PCSD0010 Order/WBS BOM, determine explosion date
PCSD0011 Knowledge-based order BOM, parallel update
PCSD0012 Customer - Mat. number/mat. number during material exchange
PCSD0013 Customer-specific processing of an explosion for BOM browser
Thanks,
ksbabuHi,
Please see documentation of enhancement MM06E005 (transaction SMOD).
Userexit EXIT_SAPMM06E_016 is a component of enhancement MM06E005.
With that enhancement, you can
- Maintain/supply your own customer fields
- Update your own customer-specific tables
You cannot:
- Change standard fields
- Change data that depends on the document header in the items
- Change data that depends on an item in the document header
Please have a look at Business Add-In (BAdI) ME_PROCESS_PO_CUST.
Regards,
Edit -
How to add Additional fields in standard SAP Report RMCLOBJVN ,TCODE CL6BN
i am facing problem in Report RMclobjvn , TCODE is CL6BN
i have to add some additional fields on the result screen.
but when i search inside the report i could not retrieve any user exits but through a search utility i got 4 user exits of which 2 seem to be useful.these are
<b>Exit name
CLCLRS01 Additional Fields on the Result Screen
CLCLRS02 Fill the Additional Fields on the Result Screen</b>
i activated the these exits and have tried putting in break point in side the include.
But the problem is this that
[<b>b]that CL6BN Tcode is not triggering anyhow these userexits.</b></b>
does anyone has any solution for adding the additional fields.Hai Manish
Check the following Links
You can do it in two ways using append structure or include structure of that standard table.
once you added , you need to adjust it and activate using the menu utilities->data base utulity-> Activate and Adjust .
check this SAP help..
for append structure
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb61446011d189700000e8322d00/frameset.htm
for include structure.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb54446011d189700000e8322d00/content.htm
Regards
Sreeni -
How to add new fields in Web UI where AET is not applicable
Hi,
We tried to add new fields using AET, but surprisingly 'Create Field' is in disabled mode in AET Configuration.
We are trying to add custom fields to the view GSTEXT/notes. But we could not do that.
what are the other possible ways to add custom fields and the required configuration for that.
Your help and suggestions will be highly appreciated.
Best regards,
VenkatHi,
Thanks for the response, We want to add two custom fields in Component / View (Gstext / Note).
We are trying with AET tool, But in AET tool configuration window, ''Create Field'' is in not in active mode (disabled mode), we can see it but it is not clickable.
In order to proceed and create new fields it has to be in enabled.
Kindly suggest me how to activate this field. your suggestions will be highly apprecaited.
Thank you
Venkat -
How to add Substitution fields after prerequisite (in step)
Hi,
Can anybody help me how to add substituion fields after prerequisites.Any configuration steps would be helpful except sap help.com.
Thanks®ards,Hi,
I am sorry , i hope, my question was not clear to u. In OBBH i have created Substitution, Then created prerequistites, For that prerequisites i want to add substitutions(for fulfilled requirements).
Substitution
step
prerequisite
substitution fields
HOw to create the aboue substituion fields, or any configuration could you please provide me.
Thanks in advance,
Veena -
Line layout option for G/L account
Dear All,
When we clear G/L account using tcode F-03, we get line layout as
Assignment, document no, document type, Posting key, posting date, amount.
I want to add material number column to this line layout.
1. I tried using IMG -> Fi-> AR/AP -> Vendor accounts->Line items-> Open item processing -> define line layout
Here we cannot add material in line layout, because fields are extracted from structure RFOPS.
MATNR(material number) field is exist in table BSEG, not in structure RFOPS. So we cannot add MATNR field in Line Layout here.
2. In this path, IMG -> FI -> G/L accounting -> Buisnes stransactions->open item clearing -> Make settings for processing open items -> Here we do not have option to change line layout for clearing of G/L account. Here we can change it for diaply and change documents.
Could any one help me in this case?
Thanks in Advance!
Regards,
NidhiHi Nidhi,
1.Please refer to note: 647773 and note:693288 if you want to make another field available in open line items seletion screen. these are modification notes.
2.as far as I confirmed in sap testing systems( release 470 and 600), there is create and change button existed, so if you don't have change and create button available in T-cd:O7Z1, I guess that you don't have the change or create authorization.
Addition if you want to maintain default value in T-cd:07V1, please double click the layout,then you can define it.
WIth Best Regards,
Gladys xing -
Add 2 same fields in O7Z4 (maintain line layout configuration)
Dear expert,
I would like to customize a new line layout for f-44 & f-58 when select on process open item.
I want to have 2 field of text field (table: RFOPS, field name: SGTXT), but when i select on insert after... only 1 text field can add in the new line layout.
Is it possible for me to add another text field (same field name as above) in same new layout?
Or this require ABAP to help?
Please advice.
Thanks
regards,
ng chong chuanHello,
The problem is that only certain amount of characters are supported. What you can do is double click on the field (or press F2) and reduce its dispay lenght. During the display, the user can scroll on the shortened fields.
I know its not the best, but at least is something.
Hope it helps, Jaime
Edited by: Jaime Plata on Dec 2, 2009 2:24 AM -
How to add a field in the view not in context node
Hi All,
I want to add a new field in one of my views. The problem is that the field does not exist in the context node. I have checked in the BOL model there it comes under another root object. I would like to know whether it is possible to add the field from another root object.
can you please help to me to solve this issue.
Advance Thanks & Regards
SujithHi Ashish,
I will give a detailed explanation of my requirement. I am working in ICWEB client for utility services, In this case for a particular view in the bsp application CRM_IUFCS_IC/View1.htm i want to add a field but the field is not the context nodes, or any of the related entities in the BOl Model. But its in another root object in the BOL Model. So i would like to know how can i add this field into my layout.
e.g.:let context node in view to be modified is buag and the field to be added is under BuilHeader object. This is the scenario.
Advance Thanks,
Sujith -
How to add new fields to the system form (Ex.expenses to a/r invoice form)
hi
can any one tell me how to add new fields to the system form (Ex.expenses to a/r invoice form)
i want to add expenses field to system a/r invoice form and connect data base also.
i used the code of samples\11.system form manipulation(vb.net) but i'm not able to get it....so can any one help with code or concepts.
reply soon plz..
thankQIf I understood you correctly, you are just trying to add new fields to the invoice form and then use them in your form. you should first go and add the field to your tables, which you would do by going to Tool --> User Defined Fields --> Manage User Fields. There are different documents or categories given. For ex. for invoices, Sales Orders you would add your field under the Marketing Documents. If you want the field to be just one per invoice, add it to the Title, otherwise if you want a field per invoice or Sales Order line, add it to the Rows section. Once you have done that then you can just create a edit box or drop down to represent the field and set the datasource for that to your field. If you want example code to do that, let me know.
-
How to add new field into dynamic internal table
Hello Expert.
how to add new field into dynamic internal table.
PARAMETERS: P_TABLE(30). "table name
DATA: I_TAB TYPE REF TO DATA.
FIELD-SYMBOLS: <TAB> TYPE standard TABLE.
*Create dynamic FS
create DATA I_TAB TYPE TABLE OF (p_table).
ASSIGN I_TAB->* TO <TAB>.
SELECT * FROM (p_table) INTO TABLE <TAB>.
here i want to add one more field into <TAB> at LAST position and my
Field name = field_stype and
Field type = 'LVC_T_STYL'
could you please helpme out .Hi,
Please find the code below.You can add the field acc to your requirement.
Creating Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE, u201C Dynamic internal table name
<fs_dyntable>, u201C Field symbol to create work area
<fs_fldval> type any. u201C Field symbol to assign values
PARAMETERS: p_cols(5) TYPE c. u201C Input number of columns
DATA: t_newtable TYPE REF TO data,
t_newline TYPE REF TO data,
t_fldcat TYPE slis_t_fldcat_alv,
t_fldcat TYPE lvc_t_fcat,
wa_it_fldcat TYPE lvc_s_fcat,
wa_colno(2) TYPE n,
wa_flname(5) TYPE c.
Create fields .
DO p_cols TIMES.
CLEAR wa_it_fldcat.
move sy-index to wa_colno.
concatenate 'COL'
wa_colno
into wa_flname.
wa_it_fldcat-fieldname = wa_flname.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 10.
APPEND wa_it_fldcat TO t_fldcat.
ENDDO.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = t_fldcat
IMPORTING
ep_table = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
Populating Dynamic internal table
DATA: fieldname(20) TYPE c.
DATA: fieldvalue(10) TYPE c.
DATA: index(3) TYPE c.
DO p_cols TIMES.
index = sy-index.
MOVE sy-index TO wa_colno.
CONCATENATE 'COL'
wa_colno
INTO wa_flname.
Set up fieldvalue
CONCATENATE 'VALUE' index INTO
fieldvalue.
CONDENSE fieldvalue NO-GAPS.
ASSIGN COMPONENT wa_flname
OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
<fs_fldval> = fieldvalue.
ENDDO.
Append to the dynamic internal table
APPEND <fs_dyntable> TO <t_dyntable>.
Displaying dynamic internal table using Grid.
DATA: wa_cat LIKE LINE OF fs_fldcat.
DO p_cols TIMES.
CLEAR wa_cat.
MOVE sy-index TO wa_colno.
CONCATENATE 'COL'
wa_colno
INTO wa_flname.
wa_cat-fieldname = wa_flname.
wa_cat-seltext_s = wa_flname.
wa_cat-outputlen = '10'.
APPEND wa_cat TO fs_fldcat.
ENDDO.
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
it_fieldcat = fs_fldcat
TABLES
t_outtab = <t_dyntable>. -
How to add more fields at level task for importing to MsProject
Hi everyone,
We would like to have the same number of fields either for importing as exporting; or at least, the fields that we need.
The problem is when we are configurating the fields for exporting from cProjects to MsProject, we found 81 available fields and then we don't find the same amount for importing (34). So, in some cases we don't find fields which were configurated for exporting and it is no posible to upload the information back because the field is no available for importing.
Does anyone knows how to add more fields for importing at the cProjects side?
Thanks a lot,
CAMILO URIBESome fields can not be migrated because of MsProject designe. The above is the reason why cProjects' customizing does not offer the
mapping of the same nuember of fields. -
How to Add parameter fields in BI publisher fields
Hi,
I'm creating xml report for Apps standard Trial Balance Summary, here i cant able to run the .rdf locally due to SRW.UserExit .
So i got the XML file from output of the report.
Then i added the xml data in BI publisher and then i have created the .rtf for that.
Here i need to add some fields which is not available in fields list (in BI Publisher).
How to add that fields, or is possible to add fields manually.
That fields are given as parameters while running the .rdf file.
Please tell me how to solve this problem.
Is possible to add fields manually means tell me how to do that.If those fields are input parameters to the concurrent program then you can display them in RTF by declaring and printing it as
<?param@begin:P_CONC_PARAM?>
and display it as <?$P_CONC_PARAM?> - Note P_CONC_PARAM should match your parameter token -
How to add new fields in Reduced message ( in BD53 )
Hi Experts,
How to add new fields in Reduced message ( in BD53 ), when the required field iis available in Table or Structure and need to be added in BD53 so that we can ALE.
Thanks,
NinadHello,
I think of something like:
First, you create extension, with transaction WE30.
Then, reduce your idoc, your extension should also be proposed.
Do not forget to add this extension in outbound we82, and/or we57 in inbound, and WE20, and find BTE or exit to populate extension.
regards.
F.S. -
PLz Help me its urgent, how to add new field in mm01 basic data screen
Hi everyone,
plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
Thanks,
murali.Hi Murali,
when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
reward if useful.
thanks
abdulsamee. -
How to add New field in SMART forms.
How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PMHow to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM
Maybe you are looking for
-
How do i create a new keyboard shortcut for an action?
I have created an action to "Save as PostScript." Can I create a keyboard shortcut or am I only allowed to use the "start" button in the action menu? Sure would be great to be able to have a shortcut....
-
I purchased an I book for the first time and now I can not find it. I thought it would bean icon on my apps page. Where did it go"?
-
IDM Password Reset Authentication Questions
Hi, We are implementing Password Self Service using IDM 7.1, everything is set up and we have tested and were able to reset password for users to connected target systems. we are now doing some cosmetic changes before going live, like setting up new
-
Copy of install disks that shipped with the G5?
My iMac boots with the chime, gets to the gray screen with the Apple logo on it, but then hangs. I assume I need to re-install the system. However, with the moves we've made, I find that I can't locate the install disks. Any help on where I can locat
-
Autocad work on mac os lion is slower compared to window
i use auto cad on a daily bases. i also use cad on windows system. on mac the cad works a little a slower. mostly in zoom and pan command.