How to add a graphic in iMovie 11?

I want to add a small countdown clock onto my movie project....like a picture in picture.....how or where can I create a countdown clock to insert into my project? It would countdown from 30 seconds to zero. I know how to do the picture in picture effect but need to know how to create the actual countdown timer.
Many thanks!
Matt

Double click on the thumbnail to enlarge and see caption.

Similar Messages

How to add a graphic watermark that is bigger than the photo?

How to add a graphic watermark that is bigger than the photo?
     Basically I want to add a watermark that is a border, like "outside stroke" so that it doesn't clip the photo.
     Upper, left and right side are 10px and on the bottom is my signature that is 40px high. I know how to do this in Photoshop, but can't figgure it out in Lightroom.
     The inset function with negative numbers doesn't work, because it only export to the size of the exported image, instead it should resize the image with those 10px up, left and right and 40px on      the bottom.
My bordes look like this either one of the two can be used, and if you scroll down you will se how the end result should look like.
And below is what it should look like, so that Lightroom doesn't clip the photo.

Are you sure the focus of your piano roll is on the right track? Are you zoomed in/out enough?

How to Add a graphical Sequence panel in a webhelp layout?

Hi,
Can anyone please let me know how to add a graphical pane on
the top right of every topic which would show the flow of sequence,
the single source layout being webhelp.
I'll be more clear......
If we click on Help>Tutorial>HTML ROBOHELP Tutorial. we
see a panel on the right which shows the graphical flow of files.
Can i do the same when i create a webhelp layout.(in html
format)....Please Please Please let me know!
Thanks
Sincerely
Siddb.

Hi Siddb and welcome to our community
What you see in the RoboHelp help file is a browse sequence
as it is presented in a Compiled .CHM file. WebHelp and FlashHelp
do not offer this type of a browse sequence. Instead, they use
little Previous and Next arrows that sit just above the Table of
Contents/Index/Glossary/Search in that little toolbar.
Cheers... Rick

How to add video files to iMovie that are not present in photos ?

i purchased iMovie yesterday for iPad and i am enjoying it a lot , but how to add my personal videos to edit that are not present in photos ? i m not a mac user but i hope soon i will get the budget to buy mac

Put your videos in a folder and sync iPhone with iTunes, "Photos" tabpreviously selected "Sync photos" and checked the box next to "videos include" I understand you do not have Mac, but with a PC can do the same, with this you will reel and your videos can be edited withiMovie on your iPhone.

How to add Oracle Graphics 6i charts (OGD) to my Oracle Reports 10g

Hi,
Is there any possibility to add Oracle Graphics 6i Charts (.OGD) to Oracle Reports 10g
(OR)
If not possible, Can you please provide steps to migrate OGD to any format that is supported in Oracle Reports 10g.
Regards,
Swethan

Oracle Graphics and its OGD image format are no longer supported. Reports built with previous versions of Oracle Reports containing Oracle Graphics charts will continue to run in Oracle Reports 10g Release 2 (10.1.2) if the Oracle Graphics 6i runtime is installed on the same machine in a separate ORACLE_HOME. However, this is not a supported configuration, and Oracle will not fix bugs that result from this configuration.
Re-create all Oracle Graphics 6i objects using the Graph Wizard

How to add radial transition to imovie

I made a film using iMovie with the radial transition.
Today, loading the file, the transition has gone both from the movie and from the transition menu.
How would I add it back to the menu so I can add it to my film?
Thanks in advance

Export the iPhoto slideshow to QuickTime format and then import into iMovie.

How to add custom graphical features to cursors in Waveform Graphs

Hi all:
I´ve starting a project in LabView, in which I need to synchronise some events with a sound track.
To do this, I tought that LabView would be the tool of choice, but now that I´m working on it, I
found my self faced with some serious problems.
What I want to do, is to represent a .wav sound file in a Waveform graph, and then use the cursors
to mark some points in the desired places where I want things to happen, but, these events are
going to be on during some period of time.
So, it will be natural that some consecutive events might overlap in time, and I need to have
some control on this.
The best solution would be to have a rectangular strip attached to the cursors, with a lenght
representing the exact time duration of the event.
But this is only possible on my dreams, because I dont see any tools on LabView that aloud us to implement
any extra graphical features on the cursors.
But as I learned more about LabView, I found that a user can program blocks of software in C, to implement
things that LabView does´nt do by default.
And now I´m wondering if this could be the solution for my problem.
Is it possible to add new custom features such as the one that I need?
If yes, how?
I have atached an image to give a clear ideia of what I need.
I´ll apretiate any help.
Thanks
Attachments:
LV Custom.jpg ‏40 KB

No, you can't modify the cursors with either the native or C code. But I'm wondering if you can't get what you want with an XY graph instead of a regular graph. You can have multiple separate plots and some of them can be thick horizontal lines. I've attached a file with just some constants wired to an XY graph to show what I mean. Obviously, you'd have to calculate the values for the x and y arrays in your real situation. If you have to use a regular graph to display the .wav file, you could also overlay a transparent XY Graph on top. The other possiblity is to use a picture control to display your data. There's a couple of shipping examples (i.e. Waveform and XY Plots, XY Multi Plot) that show how data can be represented and Pen Attributes and Sub setting shows how you can draw lines of different widths.
Attachments:
Horizontal Bars.vi ‏30 KB

HOW TO ADD MULTIPLE AUDIO TRACKS - iMovie '11

I'm having trouble adding multiple audio tracks in iMovie 11. I already have an audio track embedded with the video and a separate music track under. I wish to extend the music track further but need to cut it off at a certain point. I tried just adding the 2nd music track under the first but when I 'drop' the track it doesn't show up anywhere. Any ideas or work arounds will be helpful. Thanks.

Hana wrote:
... I tried just adding the 2nd music track under the first but when I 'drop' the track it doesn't show up anywhere. ...
you have to drag the music-clip onto a video-clip - then, iM will add it automatically upon/under the other ones ...

How to add "stickers" to an iMovie project?

Is there any way to add stickers/clip art to my iMovie project? I cannot find an option to do so. Is there another video editor that does this? Thank you.

Click on the photo to select it. A yellow border should be around the photo. Now, right-click and choose DELETE SELECTION. Or you can use EDIT/DELETE SELECTION from the menu.

How to add a title in iMovie 10.0.7?

I searched the net but its full of tutorials in older versions.

DaHappy_DJ wrote:
I searched the net but its full of tutorials in older versions.
the official and included (click on 'Help' in iMovie) Manual is always up to date and tells you ...:
http://help.apple.com/imovie/mac/10.0.6/?lang=en#/mov4d3dce7ba

I have never used iMovie before. I would like to connect many videos together and edit them. I would also like to learn how to add transitions between scenes and add music. Help!

Hey Everyone!
I want to learn how to create a video in iMovie. My goal is to be able to take many vidoes and place them into one. I would also like to delete scenes and and add transitions. I am also hoping to add music to the video I create.
Please help or direct me to an area that will help me! =)

Here is some extra information (which I intended to include in my previous aborted post):
iLife '11 Video Showcase (scroll down to see iMovie '11) -
http://www.apple.com/ilife/video-showcase/
iMovie '11 Help (can also be accessed from iMovie's menu item Help>iMovie Help) -
http://help.apple.com/imovie/#button-0
(the same link that Karsten provided above)
Ken Stone's iMovie '09 Tutorial (still mostly relevant to iMovie '11) -
http://www.kenstone.net/fcp_homepage/imovie_09_stone.html
In addition, the following links will be useful (relating to iMovie '08 and iMovie '09, but still mostly relevant to iMovie '11) -
http://www.apple.com/findouthow/movies/imovie08.html
http://www.apple.com/findouthow/movies/
Note that some of the above links contain video tutorials. It's well worth watching all that you come across!
Have fun with iMovie '11 and don't hesitate to seek further help here in this forum.
John

How to add an icon to a node in network graphics?

Hi all,
Do you know how to add an icon (any SAP' icon) to a node in network graphics?
Just like a tree can have a leaf with icon (for example, a person icon, a plant icon), can a node in network graphics have an icon also? and how to implement in network graphics?
I already studied t-code gral: NETZOCX1
NETZOCX2
NETZ_BO1
NETZ_BO2
NETZ_BO3
But no actual output.
It seems using node type in network graphics can help to determine different icons, could you give some suggestion or examples?
Thanks a lot!!

Hi,
Thanks for you link about SAP Graphics Framework. It seems not very useful in our case.
Since we are using Control Framework now, there is Tree and Networks in it. Can a node in a network have an icon (such as person icon, plant icon)? I know a leaf in a tree in Control Framework can have an icon.
Anybody has comments or suggestion?
Thanks!

How to add text to Imovie

Hi there,
As a new user of an Macbook, and iMovie, I cannot figure out how to add texts to my movies. I do understand that I can add titles, but that doesn't allow me to change positions nor allows me to edit the font in the extent that I want to.
Naturally I browsed the web, and the only conclusion I can draw is that it is not possible (yet) to add plain texts to your movie. Is this correct?
If this is the case, do you use some other programs to circumvent this limitation in iMovie?
Thanks for your help!

in imovie 10, look at the bottom left hand corner there should be:
Content and Backgrounds
Titles
Tranistions
This is also known as the content libary
Click on titles and they should appear, it works for me.

Does anyone know how to add multiple pictures to a single frame in iMovie?

Does anyone know how to add multiple pictures to a single frame in iMovie?

Maybe you would be better off posting this in the iPhoto or iDVD categories of the forums.
http://discussions.apple.com/category.jspa?categoryID=143
http://discussions.apple.com/category.jspa?categoryID=128
The answer to your question depends on what you ant to do with the DVD.
Do you want a DVD menu, slide show etc.
iPhoto will allow you to burn straight to a DVD. Just select the album you want to burn then go to share in the tool bar and select Burn.

RE: how to add attributes in graphical modulator in segment builder .

Hi Gurus,
can you please help me how to add attributes in graphical modulator in segment builder in sap CRM 7.0 WEB-UI.
thanks and regards
satyanarayana
Edited by: koradasatya on Oct 27, 2011 8:14 PM

Hi Gurus,
thanks for your reply my requirement from client is given below if you could answer this it will be a great help for me.
WKSC needs to be able to make selections (in segment builder) with the possibilities to use stored data on organizations. The information we are missing in Segment builder (SB) (and Account search for industrycode) are Industrycode (we want to see values not codes) and responsible salesrep (values not codes).
These variables together with regions and other marketing attributes is crucial for us. Without it we cannot use the functionality built.
We also need it so that we can extract smaller parts of our customers and prospects and update them with information from the thirdparty or adding new persons to them.
Everyone using the SB should be able to use the fields for selections. i.e. Marketers, marketing managers and power users.
Example
We would like to make selections that could look like this.
Region: A and B
Organization in Industrycode C
Sales rep: D, E, and F
Turnover: above 50000
CP on selected orgs
CP has title G or H
CP has Email not blank
thanks and regards
satya

How to add a graphic in iMovie 11?

Similar Messages

Maybe you are looking for