How to add a ipv6 prefix boundary in sccm for Direct Access

Does anyone know how to add a ipv6 prefix for a sccm 2012 boundary?   For one, I'm not sure which prefix I should add.   I tried adding a couple prefix ipv6 addresses I seen on the DirectAccess gpo that is autocreated but sccm says invalid.  For
some reason SCCM adds a bunch of zeros after what I put.   
Any help is appreciated.
Thanks

I opened the sccm console and looked for my test computer.  I right clicked the device and did properties.   It then showed all the ipv6 prefixes for under discovery data.   Did all the work for me.   Added those and now my software will
download and install from software center.

Similar Messages

  • I am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going of

    i am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going off. Can some one help?

    Hi Jay,
    Be aware that "Freeze Header Rows" and "Freeze Header Columns" apply only to rows and columns that are Header rows or Header columns. You can have up to five Header rows, Five Header Columns (and five Footer rows) on a Numbers Table.
    "Header rows" is a special designation. Besides being able to be frozen, Header and Footer rows are not included in formulas referencing whole columns, making it possible to place formulas such as =SUM(B) at the top (or bottom) of column B without causing a self-reference error, These designated rows are also not included in sorts of the rows in a table.
    Regards,
    Barry

  • How to add new line item using BAPI BAPI_CONTRACT_CHANGE for contract-ME32K

    HI Experts,
    how to add new line item using BAPI: BAPI_CONTRACT_CHANGE for existing contract.
    Requirement:
    Already the contract having two line items using ME31K.
    Custom program has to add new line items in existing contract.
    Thanks,
    Sendil

    I got the solution:
    We can do like this:
    1. Get all details using details, BAPI_CONTRACT_GETDETAIL.
    2. After getting results, append new line item. Then use your BAPI.
    Check this posting program.. where this bapi is used, use the same coding technique.
    IDOC_INPUT_PURCONTRACT_CHANGE

  • How to add a nvidia ge force video card for a pavilion g6 which has a intel hd 3000?

    How to add nvidia ge force 525 video card for this laptop?

    Hi,
    The answer is no way you can add a video card on your laptop. Actually nearly all laptops including many which have dedicated video cards.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to add the "Voltage Calibration"in the DCpower for IVI drive??

    How to add the "Voltage Calibration"in the DCpower for IVI drive??

    To gather more information concerning the use of IVI there is a very comprehensive page of Class Specifications for IVI Class Instruments:
    www.ivifoundation.org
    This resource covers all IVI calls for each class of instruments and should provide you wiht valuable information. For an additional overview of IVI and its relationship to NI products, you can also visit our Resource Library:
    ni.com>>Resource Library>>Instrument Drivers
    Best Regards,
    Chris D
    Applications Engineer
    National Instruments

  • Hi team, please help me how to deploy creative cloud desktop application through SCCM for an enterprise

    Hi team, please help me how to deploy creative cloud desktop application through SCCM for an enterprise

    Moving this discussion to the Enterprise Deployment for Creative Cloud, Creative Suite forum.

  • How to add Custom Attributes in the SOAP header for OWSM

    Hi,
    I like to know how to add the Custom Attributes in the SOAP header for OSWM username token authentication.
    Currently we are getting the header element like
    <wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
    here we need to add the attribute "soap:mustUnderstand="1" , so the element will look like
    <wsse:Security soap:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
    Any info on this will be helpful.
    Thanks,
    ArunM

    Hi Jay, you can make it in more than 1 way.
    I suggest you the following:
    - create an URL iview that points to any URL you want.
    - define a Resource that points to the iview (with a window name, to open in new window)
    - define an Area that points to the resource
    - add your new Area to the your current Area Group
    Regards!

  • I absolutely CANNOT figure out how to add playlists to my ipod. i have followed directions - NOT WORKING.. frustrated!!!!!!  HELP.

    please help!  i am a fitness instructor that DEPENDS ON MY PLAYLISTS, and ever since i upgraded to itunes 11 last week, i CANNOT figure out how to add playlists to my ipod!  the tutorials were not helpful, as i followed instructions, and it DID NOT WORK.  i am VERY frustrated.  can someone help?
    thanks!

    revert the look and feel to itunes 10
    View > Show Sidebar
    View > Show Status bar.
    Now everything will work before.
    Click on your iPod in the lefthand window. Then use the music sync page to select your playlists. Or drag the playlists to your device

  • How to add external library in class path folder for use in Java call-out?

    Hi,
    I am working with Java callout component in OSB 12c using Jdeveloper.
    Thing is Jar what i am using to perform conversion of json to xml that using external libraries.
    When i have give reference of my project jar to java callout it doen't found external libraries.
    Could you please tell me how to add external libraries in class path folder or How to use to add it through web-logic server ?
    Thanks,
    Pavan

    Hi,
    Thanks, I have solved issue.
    We can add on following path in windows pc:
    C:\Users\your_usename\AppData\Roaming\JDeveloper\system12.1.3.0.41.140521.1008\DefaultDomain\lib
    One you add your external lib here then do restart weblogic server instance.
    Now, you have that external lib or jar in use.
    Cool!

  • How to add third-party libs to Java WAS for my Webdynpro DC?

    Hello all,
    Here is my scenario:
    I have some thrid-party libs(some jars) which is necessary to my Webdynpro application. It is ok to add these files in the webdynpro project's classpath. But because these jars are missing on my server, somy webdynpro app not works.
    Could anyone give me some proposal for this kind of problem? How to add these jars to the J2EE server and access them in the webdynpro project?
    Thanks and Best regards
    Deyang

    Hi Deyang,
    Also add these jars in the <b>lib</b> folder of your WebDynpro application. Open the application in the <b>Navigator mode</b> and there under the folder structure you will find the lib folder. Copy and paste these required jars in this folder as well.
    See this pic:
    <a href="http://img508.imageshack.us/img508/4614/jars9jq.jpg">Put jar files in Lib Folder</a>
    This will solve your problem.
    Regards
    Pravesh
    PS: Please consider rewarding points if helpful and solved.

  • How to add fonts to iWork09 v.4.3 for macbook pro?

    How to add fonts to iWork09 v4.3 for MacBook Pro?

    Safe Mode
    Press and hold the Shift key. Reboot. Release Shift key when grey progress bar appears during boot.
    Enter your Login name and password. Before you proceed, press and hold the Shift key.
    When your desktop appears, release the Shift key.
    Reboot normally.
    Re-evaluate Fonts
    Open a new or existing document in Pages. Check to see if the Chalkduster and Cochin fonts appear in the menu, and that you can add document content with either font.
    Also, pay attention to Tom's suggestions. He is an authority in this space.

  • How to add licensed ports to essbase olap server for as400

    Does anybody know how to add aditional licensed port to essbase olap server for as400 without having to reinstall the product, or reinstall the fixpack? thanks in advanced!

    On Unix / Linux you should be able to leverage the response from Raphael and change:
    Location＝%BOBJDIR%/bobje/data/.bobj/registry/software/business objects/suite 11.5/sap/keycode/.registry
    For more information verify the below link
    [How do you update the SAP Integration Kit license?;
    Regrads
    Pardhu

  • How to add an item object as a child for a specified parent node in AdvancedDataGrid in Flex?

    Hi all,
              This is the code, to add a object as a child into a specified parent node in AdvancedDataGrid in flex.
    <?xml version="1.0" encoding="utf-8"?><mx:Application
    xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" creationComplete="onCreationComplete()" width="100%" height="100%">
    <mx:Script><![CDATA[
    importmx.controls.Alert; 
    importmx.collections.IHierarchicalCollectionViewCursor; 
    importmx.collections.IHierarchicalCollectionView;  
    importmx.collections.ArrayCollection; [
    Bindable]private var objectAC:ArrayCollection = newArrayCollection(); 
    //This method is used to construct the ArrayCollection 'flatData' 
    private function onCreationComplete():void{
    var objOne:Object = newObject(); objOne.name =
    "Rani"; objOne.city =
    "Chennai";objectAC.addItem(objOne);
    var objTwo:Object = newObject(); objTwo.name =
    "Rani"objTwo.city =
    "Bangalore";objectAC.addItem(objTwo);
    var objThree:Object = newObject(); objThree.name =
    "Raja"; objThree.city =
    "Mumbai";objectAC.addItem(objThree);
    //This method is used to add one object as a child item for the parent node 'Rani' 
    private function addChildItem():void{
    var dp:IHierarchicalCollectionView = groupedADG.dataProvider asIHierarchicalCollectionView;  
    varcurent:IHierarchicalCollectionViewCursor = groupedADG.dataProvider.createCursor();  
    var dummyParentNode:Object = {name:"Rani", city:"New Delhi"};  
    var obj:Object = null; 
    while(curent.current){
    // To get the current node objectobj = curent.current;
    // Add Child item, when depth = 1 and Node name should be "Rani" 
    if (curent.currentDepth == 1 && obj["GroupLabel"] == "Rani"){
    dp.addChild(curent.current, dummyParentNode);
    curent.moveNext();
    groupedADG.dataProvider = dp;
    groupedADG.validateNow();
    groupedADG.dataProvider.refresh();
    ]]>
    </mx:Script> 
    <mx:AdvancedDataGrid id="groupedADG" x="10" y="15" designViewDataType="tree" defaultLeafIcon="{null}" sortExpertMode="true" width="305" > 
    <mx:dataProvider> 
    <mx:GroupingCollection id="gc" source="{objectAC}"> 
    <mx:grouping> 
    <mx:Grouping> 
    <mx:GroupingField name="name"/> 
    </mx:Grouping> 
    </mx:grouping> 
    </mx:GroupingCollection> 
    </mx:dataProvider> 
    <mx:columns> 
    <mx:AdvancedDataGridColumn headerText="Name" dataField="name"/> 
    <mx:AdvancedDataGridColumn headerText="City" dataField="city"/> 
    </mx:columns> 
    </mx:AdvancedDataGrid> 
    <mx:Button x="10" y="179" label="Open the folder 'Rani'. Then Click this Button" width="305" click="addChildItem()" /> 
    </mx:Application> 

    Hi,
    It's not possible to 'append' a StringItem or a TextField (or any other lcdui.Item object) to a Canvas or GameCanvas. You can only draw lines, draw images, draw text, etc etc, on a Canvas screen. So, you can only 'simulate' the look and feel of a TextField (on a Canvas) by painting it and adding source code for command handling (like key presses). However, this will be quite some work!!
    lcdui.Item objects can only be 'appended' to a Form-like Displayable.
    Cheers for now,
    Jasper

  • How to add Document group  in t code S_ALR_87012082 for dynamic selection.

    Hi Gurus,
    I Need to add  Document group  in t code S_ALR_87012082  for dynamic selection.
    Currently here two groups are showing , Vender and Comp Code. i need to add Document group  there. Kindly guide me in this.
    Thanks in advance.

    Hi
    Pls follow below report
    *S_ALR_87012103 - List of Vendor Line Items *
    In dynamic selections you can find Document number, there you can give the range
    Reg
    Vishnu

  • How to add standard "reason" field as search criteria for service orders?

    Hi,
    I would like to add the criteria "reason" in search tool for service orders.
    Would it be standard or woudl it need development?
    Many thanks,
    Eli

    Hi Eli,
    Please go to the web ui configuration and search reason feild is available for the config view. If it is available please move from hidden to visible. If it is not available you can add using development or AET to add that feild in the view.
    Regards,
    karthik J

Maybe you are looking for