How to add a library dynamically in xcode

Hi friends,
How do I add a library in xcode project?
Thanks

Hello,
You might get better help in the Developer Forums...
https://discussions.apple.com/community/developer_forums?view=overview
Good luck!

Similar Messages

  • How to add a library (libSomeRandomlib.so) to a project....??

    Ok, so I've been trying to get CERN's ROOT program/libraries to work in an xcode project for a while, but I'm running into one really weird error, and I think I may just not know how to add a library to a project correctly.
    Suppose I create a new Xcode C++ command line tool project. I hit Build and go, and it gives me a nice little Hello World! in the console, just as it should. If I then click on the project in Groups & Files, go to Project>Add to Project..., and choose, say, libCint.so, from my root/lib directory, and click ok, then click Build & Go, I get an error in the console:
    dyld: Library not loaded: @rpath/libCint.so
    Referenced from: /Users/paulthompson/Documents/Programming/Build Products/Debug/LibraryIncludeTest
    Reason: image not found
    sharedlibrary apply-load-rules all
    Data Formatters temporarily unavailable, will re-try after a 'continue'. (Cannot call into the loader at present, it is locked.)
    My assumption is that either I'm missing a step in the process of adding a library, or else there is something jacked up with the libraries themselves. Anyone have any advice?
    Thanks,
    Paul
    EDIT* Oh, I should mention that the actuall binary that gets built after adding the library WILL execute properly in the Finder, or from terminal, just not with the Build & Go, or Go commands from within xcode.
    Message was edited by: TraxusIV

    TraxusIV wrote:
    Results of otool:
    LibraryIncludeTest:
    @rpath/libCint.so (compatibility version 0.0.0, current version 0.0.0)
    /usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.9.0)
    /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 123.0.0)
    Macintosh-9:Debug paulthompson$ otool -L /Applications/CERNRoot/root/lib/libCint.so
    /Applications/CERNRoot/root/lib/libCint.so:
    @rpath/libCint.so (compatibility version 0.0.0, current version 0.0.0)
    /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 125.2.0)
    /usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.9.0)
    I honestly don't know much about @rpath. I found this page that explains it a bit more: http://blogs.sun.com/dipol/entry/dynamiclibraries_rpath_andmac
    So, since I don't want to deploy with the environment variable set, I should ask, what IS the correct, MacOS X way to do it?
    The best way to find that is to look at how Apple does it. They put frameworks in /System/Library/Frameworks and regular shared libraries in the standard places. You can do the same. Put your frameworks into /Library/Frameworks and your shared libraries into /usr/local-based paths.
    If you want to create stand-alone executables that can be installed via drag-n-drop, you can put shared libraries inside the application bundle. If your shared libraries/frameworks are elsewhere, you will need some sort of installer to get them installed.
    I've been sifting through Apple's developer documentation but I have yet to find a concise, straightforward explanation of how to add shared libraries. I'm horribly confused at this point. Is there a good tutorial available anywhere for both the general unix case of linking to dylibs and .so's, and the Mac specific case?
    Hopefully someone else knows an answer for this one.
    *EDIT* I do already have the variable defined both in ~/.MacOS/environment.plist and also in Xcode as an additional user variable.
    I'm not sure about the whole RPATH thing. Setting environment.plist will define environment variables for use in the Finder, but that is really a hack. There are better ways to do it, but if you are porting some open-source programs, that may be the only way. You should be able to define those variables in Xcode. You have to selected the debug executable under "Exectuables"

  • How I add a LIBRARY ITEM to a page layout, top/bottom ?

    how I add a LIBRARY ITEM to a page layout, top/bottom ? in
    dwmr mx 2004 and cs4 ?

    Have you looked at the DW help file - it will explain all
    about library items :-)
    Nadia
    Adobe® Community Expert : Dreamweaver
    Unique CSS Templates |Tutorials |SEO Articles
    http://www.DreamweaverResources.com
    CSS Tutorials for Dreamweaver |
    http://www.adobe.com/devnet/dreamweaver/css.html
    Book: Ultimate CSS Reference (aff link) |
    http://www.sitepoint.com/launch/005dfd4/3/133
    http://twitter.com/nadiap
    "lse987" <[email protected]> wrote in
    message news:gpsvtt$t5q$[email protected]..
    > how I add a LIBRARY ITEM to a page layout, top/bottom ?
    in dwmr mx 2004 and cs4 ?

  • Help:  How to add a library item to hide the default Window menu

    Hi,
    In this post: Help: How to add a library item to hide the default Window menu, it described how to create an menu that will hide the default window menu.
    I'd like to know if there a way to put this component into library so that others can directly inherit this menu in other FORMS and how to implement it.
    Jimmy

    Hi,
    I found the solution and the post was not properly phrased. There is no need to add menu into library. All we need is to put the compiled menu into Oracle AS and add the menu name the menu module of the given form.
    Thanks.
    Jimmy

  • How to add the library of linphone into existing project ?

    How to add the library of linphone into existing project ?

    How to add the library of linphone into existing project ?

  • How to add a frame dynamically in a jsp page.

    Hai all,
    In my application, in a particular jsp page i had the 3 links namely add.edit and delete. When click on add button, it is pointing to another jsp page where i can enter user details. But what i want now is when i click add button, the form in which we fill the user details should be added to the current page itself dynamically i.e., it should not go to another page when i click add button and that form should be displayed in the current page in a new frame dynamically.
    The same should happen when i click n edit or delete options. everything should be diaplayed in the same page in different frames.
    Can anyone suggest me about how to add a frame dynamically.

    You create a frameset with two frames. One frame you give 100% of the rows and run the JSP in this frame. The other frame you give 0% of the row so that it is hidden. In the JSP you use a JavaScript funtion to submit the form. This function will call the parent frameset to reset the row values to 50%/50% which will make the bottom frame visible and then submit the form request with the bottom frame as teh target.
    It is not so much as creating frames as using JavaScript to hide and display frames.

  • How to add ComboBox to dynamically created DataGridColumn ?

    hai friends,
    help me, How to add ComboBox to dynamically created DataGridColumn

    public     function docfoldercurtainmanagerResult(event):void
    if(event.result){
    rightslistArray=event.result.RES2;
    //Alert.show(event.fault.message);
    <mx:DataGridColumn  
    headerText="Rights Level" minWidth="75" sortable="true" >
    <mx:itemRenderer>
    <fx:Component>
    <mx:ComboBox dataProvider="{outerDocument.rightslistArray}" labelField="sec_rights_level" />
    </fx:Component>
    </mx:itemRenderer>
    </mx:DataGridColumn>

  • How to add dll library to application?

    I start programmed the CVI a few weeks ago and I have a little problem. I must make an application layer for profibus master device. However I total do not know how to add dynamic library to program, because in another way I get the error: undefined symbol. I know that it very trivial, but I cannot find solution. I have a lib file and also I include file about device, but I still get the error – undefined symbol – can you help me?
    Thanks very much for any advice or help

    Dear laszku,
    Are you looking for solutions to connect your CVI application with PLC? Because there are also solutions for that which are easy to use, and to implement with CVI.
    If you want to use your DLLs, there are some on-line help, how to import them in CVI.
    Basicaly there are two different method to import DLLs:
    - static import, when you import the library in your CVI project. The dll will be loaded when the exe starts running. If there is an issue to load the library, you'll be able to get the error at compilation time.
    - dynamic dll import, when you load the library at run-time. With this, you get the flexibility to control, when will be the dll linked to your exe in the memory, while running. The disadvantage is, you'll get errors only at run-time.
    I recommend you some of our on-line tutorial, how to load DLL into your application in CVI:
    CVI Help: Loading Dlls - This says: You cannot import DLLs directly into your project. You need to create DLL Import Library, which can be imported into your project.
    To do so, look at this knowledge base: Creating Import Libraries for a DLL in LabWindows/CVI
    You might get answers for your following questions at this FAQ page:
    FAQ: Using Dynamic Link Libraries with LabWindows/CVI
    Some help sites:
    Rules for Using DLL Files
    Linking to Functions Defined in a DLL From LabWindows/CVI
    If you need dynamic linkink, you can get example code with this site:
    How Can I Access DLL Functions in a LabWindows/CVI Program Without Including the Import Library in t...
    I hope, I could help you to find the way how to import DLL libraries.
    If you still couldn't solve the error after studying the links, please provide me more information, where, which symbol is missing, and also the full error message.
    The error you get, can be caused by the linker or pre-compiler also, which doesn't find the symbol you requested. Please check the path of your library and dll also.
    Best Regards,
    Tamas Szekely
    Applications Engineer
    National Instruments

  • How to add a library jar to a EJB module?

    Hi All,
    in J2EE the normal procedure to a library jar to a module, is to add the library in the Class-Path header of the manifest of the module, and then include the actual jar in the root structure of the ear file. Unfortunately it is not clear to me how S1S5 update 1 supports this. The only option Studio I found so far, is to add the jar as a 'file to include', but then the contents is added to the module jar and not to the ear file itself, resulting in duplication of classes across modules. Is there an option to add the library jar in the Class-Path of the module?
    Thanks in advance,
    Stijn

    I believe that better support for this was added in the Sun Java Studio 6 EA release. It was added to the Extra Files property on an EJB Module.

  • How to add an extra dynamic columns in workflow inbox?

    Hi Every Expert,
    Transaction SWL1 only provides Six columns as dynamic columns for workflow inbox. But we need to use 7 to 8 dynamic columns. How to add these two extra columns into workflow inbox?
    Thanks,
    Shirley

    Thank you very much for all you responses.
    Due to SAP only provides 6 columns, I can't add anohter extra dynamic column. I may consider to change task to show the contents in preview pane.
    Thanks again to everyone.
    Shirley,

  • How to add sound to buttons in Xcode 5.0.1?

    hello
    i am wanting to know how to add sound to a button in xcode 5?
    its mover 200 sounds of like 1 sec.
    i am using storyboards
    i need it ASAP please tell me
    thanks alot

    That's the wrong file path. You want to go to the artwork and effects palette, find the layer styles section, and choose your style there.

  • How to add af:inputFile dynamically within each row of table?

    I need to add af:inputfile dynamically within each row of af:table, when the user hits a commandlink at the bottom of each row.
    I have tried wrapping af:inputfile with af:foreach:
    <af:table value="Bean.rows" var="row">
    <af:column>
    <af:forEach step="1" begin="1"
    end="#{Bean.filecount}">
    <af:inputFile label="Please upload a file"
    id="1"
    valueChangeListener="#{Bean.onClickUpload}"/>
    </af:forEach>
    <af:commandLink text="Add more file" id="cl3" actionListener="#{Bean.onAddFile}"/>
    </af:column>
    </af:table>
    in Bean.onAddFile, I have:
    public void onAddFile(ActionEvent event){
    filecount++;
    It works but there's no independent control of each row. When I click one commandlink, All rows now have 2,3,.... af:inputFile. The change affects all rows.
    The requirement should be that when I click one commandlink in a row, only that row shows additional af:inputFile.
    So why not leverage the row variable of the table, right? That's what I did, I changed the end attribute of foreach to the following:
    <af:forEach step="1" begin="1"
    end="#{row.fileRowCount}">
    the backing bean method changed to the following:
    public void onAddFile(ActionEvent event){
    int filerowcount = (Integer)JsfUtil.resolveExpression("#{row.fileRowCount}");
    Integer newcount = filerowcount+1;
    JsfUtil.setExpressionValue("#{row.fileRowCount}", newcount.toString());
    Note that "row" refers to an object that has a int field called "filerowcount". And the initial value is "1".
    Just for testing, I also added <af:outputText value="row.filerowcount"/>, to see if the count is what I expected it to be.
    I didn't see the any af:inputfile this time, but the outtext is showing the filerowcount properly. When I click the commandlink, the number changed to 2,3,..... Also in the backing bean newcount and filerowcount is incrementing correctly.
    I know the begin, end attribute means the index of a for loop. So I changed begin="0", it now shows one row of af:inputfile, but when I click the commandlink, no additional rows are shown. (Although the outputtext of filerowcount keeps incrementing as expected.
    So to sum up, the END attribute of af:foreach row CAN pick up the value from the backing bean and render af:inputfile dynamically, but it CANNOT pick up the value from the the field in VAR object of a table.
    Is is a known issue? Or I did something by mistake.
    Is there any other way to add af:inputFile dynamically within each row of table?
    Any advice/comment is appreciated.

    Hi,
    here is how it goes:
    - add an af:inputFile to the column and set its rendered property to point to a managed bean property. The managed bean property has a default value of "false" and the bean should be in viewScope
    - create another variable that holds the row number that should show the inputFile component. This is updated by the command link and evaluated by the get method of the managed bean property controlling the inputFile visibility
    - Define a property name for the table varStatus property
    - For the command link, define a attribute f:attribute with the name rowNumber and set its value to #{varStatusPropertyName.index}
    - define an action listener for the command link
    public void showInputFile(ActionEvent actionEvent){
    int rowNumber = ((RichCommandLink) actionEvent.getSource()).getAttributes().get("varStatusPropertyName");
    //set the value on the internal variable
    - In the getter of the property that defines the render value of the inputFile, use code like this
    public boolean get<whatever name you use>(){
    //access the following EL from Java #{varStatusPropertyName.index}
    int currentRenderedRow = <EL result here>;
    // compare the current row index with the one set by the command link, which is stored in the variable of the managed bean
    if true return true
    else return false
    - Set the PartialTriggers property of the table to point to the commandLink ID so the table is repainted when the command link is pressed
    This should then render the fileInput component for a single row (the one you clicked the command link in)
    Frank

  • How to add packed library on palette set

    Hi,
    I am unable to add packed library to pallete set. Can someone provide information on how to do that?
    Thanks,
    Andrej 
    Solved!
    Go to Solution.

    Andrej,
    starting with LV 2010, you can use packed libraries to encapsulate functions and supply them on the palettes. The way to get there is somehow a little tricky, so here a short description on how to do that:
    1. Build your LV library (lvlib) as used, please remember to set prudent item settings (private vs. public). Public items will be "exported" in the packed library whereas private are not.
    2. Open the palette edit tool via Tools >> Advanced >> Edit Palette Set
    3. Go to the subpalette you want to include your custom palette (exported items) and right click on the parent palette. Select Insert >> Subpalette.
    4. In the dialog, select Create a new palette file (.mnu). Select a path contained in your lvlib.
    5. Customize your subpalette as desired. Please place only public items on the palette.
    6. Save the changes and add the new .mnu file to your lvlib.
    7. Build the packed library. Make sure, that the .mnu file is part of the lvlibp (by default it is already selected).
    8. Copy the lvlibp to the target system.
    9. Select Tools >> Advanced >> Edit Palette Set in the target. Browse to the palette you want to have as parent for your lvlibp.
    10. Right click and select Insert >> Subpalette. On the dialog, select Link to a palette file in a project library. Select your lvlibp file and acknowledge the following dialog.
    11. Save changes and use your lvlibp on the target.
    That should be a comprehensive step-by-step list for this request.
    Hope this helps,
    Norbert
    [EDIT] Corrected some typos.
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • How To add a library to an adapter

    Hello!
    I'm trying to build a custom adapter and do my first steps:
    I want to add some libraries to the sample_ra.sda but don't know where or how to add the jars...
    If I place them here I get a NoClassDefFoundException:
    - sample_ra.sda
    | - META-INF
    | - sample_ra.rar
    | | - META-INF
    | | - sample_ra.jar
    | | - lib_1.jar
    | | - lib_2.jar
    | | - ...
    Any hints??
    THANK YOU!
    Regards,
    Christian

    Hi Chris,
    Check these links below, for creation of custom adapters & Modules
    http://help.sap.com/saphelp_nw04/helpdata/en/8b/895e407aa4c44ce10000000a1550b0/content.htm
    https://websmp201.sap-ag.de/~sapdownload/011000358700003237612005E/HowToCreateAdapterModules.pdf
    https://media.sdn.sap.com/public/eclasses/teched04/XI301_files/Default.htm#nopreload=1
    Regards
    Vishnu

  • How to add external library in class path folder for use in Java call-out?

    Hi,
    I am working with Java callout component in OSB 12c using Jdeveloper.
    Thing is Jar what i am using to perform conversion of json to xml that using external libraries.
    When i have give reference of my project jar to java callout it doen't found external libraries.
    Could you please tell me how to add external libraries in class path folder or How to use to add it through web-logic server ?
    Thanks,
    Pavan

    Hi,
    Thanks, I have solved issue.
    We can add on following path in windows pc:
    C:\Users\your_usename\AppData\Roaming\JDeveloper\system12.1.3.0.41.140521.1008\DefaultDomain\lib
    One you add your external lib here then do restart weblogic server instance.
    Now, you have that external lib or jar in use.
    Cool!

Maybe you are looking for