How to add a masterdata infoprovider to the exisiting cube or ODS

Dear all,
We have in data in sales  ODS's and Cubes ..
Now the requiremnt is i want to add one master data infoprovider to these infoproviders....
How to go abt it?
We have to delete  the data and add the field and then load the data
or go for multrprovider?
which is the best one...is there any other solution
Regards
venu

Hi,
This will be helpful.
Populate historical data into a newly added field in an infoprovider
How to populate historical data into a newly added field in an infoprovider
/people/dinesh.lalchand/blog/2006/02/07/loopback-process--follow-up
Thanks,
JituK

Similar Messages

  • How to add A single row at the middle of the table in a Webi report

    Hi,
         I created a Webi report using Universe(Created universe using bex query).Now i have a requirement to display a row at the middle of a report. Can you please tell me ,how to add a sigle row at the middle of a Webi report.
                                                    Thanks in advance
    Regards
    Monika

    Hi Monika,
    It is not really possible to add a row (I assume you mean of unrelated data) to the middle of a table in a report. You can add a new table with a single row between two tables. For instance you could add a new one row table, or even single cells which are positioned relatively between two tables. Possibly a block on top of another. But this gets tricky.
    Can you explain in more detail what you are trying to do?
    Thanks

  • How to add a radio station to the library

    just loaded itunes 6 (windows box) and can't find out how to add a radio station to the library

    If your current stations in WMP are .pls or .m3u URL's, they may work in iTunes also. Use the "Open Stream" command from the Advanced menu and put in the URL that includes .pls/.m3u. If the URL is a .mwv variety, those are Windows proprietary format and not supported by iTunes. Same with .ra streams (Real Audio).
    .pls & .m3u usually indicate MP3 based streams supported in iTunes. It's up to the original radio station/streaming site to select the format and make it available. Shoutcast.com & Live365.com are great resources for mp3 based streams.

  • How to add a new tab for the project?

    Dear All Experts,
        Could you tell me how to add a new tab for the project?
        Pls refer to the screenshot as below:
    Thanks!
    Xinling Zhang

    Hi,
        The new tab in cj20n , and the new tab can only be displayed in the highed level.Pls refer to below
        And in cj02, there is no this tab also in the wbs detailed screen,
    Thanks!
    Xinling

  • Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

    Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

    Thanks. I've tried this and apparently the template I'm using is one of those where it doesn't work. I've tried dragging it as well as cutting a pasting but it always travels back to the end of the book. Maybe I can try changing the template temporarily, move the preface page, and then convert back to the original template. I'll experiment a little.

  • How to add a text box in the layout (View)

    How to add a text box in the layout (View)

    Hi.
    Right Click in the RootUIElement container.
    Click Insert Element.
    Give Name: Input
    Type : Input Field.
    Press Enter.
    Regards
    Bala.

  • How to add a excel driver in the Adminstrator tools

    how to add a excel driver in the adminstrator tools > odbc Datasource,
    I have to add the name and excel sheet location in the SystemDsn but whiling finishing the stups i will get the error like
    error found could not found the registery.
    ,So is there any other setting is required while i am adding in the excel driver
    please help me out for this ,this is 1st time am using the excel source in the report data source..

    I'd ask them over here.
    Windows forums on Microsoft Answers
    Office Excel forums on Micrsoft Answers
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • How to add an extra page to the index.html page on dreamweaver CS6?

    How to add an extra page to the index.html page on dreamweaver CS6?

    Index.html = your domain's home page.  There is only one home page per site.
    To create a new page from your index, go to File > SaveAs > filename.html.  Repeat for other site pages.  Add links on your index page that lead to other site pages.
    See  Creating your first web site in DW CC (5-part tutorial)
    https://helpx.adobe.com/dreamweaver/learn/tutorials/how-to/first-website-part1.html
    Nancy O.

  • How to add 'Confidential' watermark to all the pages in portal

    Hi
    How to add 'Confidential' watermark to all the pages in portal.We have ESS/MSS business packages installed 60.1, 60.2.
    ECC5, EP SP16 is the environment.
    Help will be appreciated
    Thanks
    Sharath

    Hi Sharath,
    What about using the theme editor to add a background to either the page or the iView tray?
    Daniel

  • [SOLVED] How to add modules to build with the kernel?

    Hello i´m trying to learn how to build my own custom kernel and doing it the arch way https://wiki.archlinux.org/index.php/Ke … raditional. But unfortunately dm-crypt was not included in the kernel so it all failed.
    svart_alg% sudo mkinitcpio -k 3.15.6 -c /etc/mkinitcpio.conf -g /boot/initramfs-test.img
    ==> Starting build: 3.15.6
    -> Running build hook: [base]
    -> Running build hook: [udev]
    -> Running build hook: [autodetect]
    -> Running build hook: [modconf]
    -> Running build hook: [lvm2]
    ==> ERROR: module not found: ‘dm-snapshot’
    -> Running build hook: [encrypt]
    ==> ERROR: module not found: ‘dm-crypt’
    -> Running build hook: [block]
    -> Running build hook: [filesystems]
    -> Running build hook: [keyboard]
    -> Running build hook: [fsck]
    ==> WARNING: No modules were added to the image. This is probably not what you want.
    ==> Creating gzip initcpio image: /boot/initramfs-test.img
    ==> WARNING: errors were encountered during the build. The image may not be complete.
    I have never don any of this before and have no idea of how to add a missing module to the kernel i´m building. So i search on internet and had a very hard time finding a good guide for this but i fond one possible solution. https://www.kernel.org/doc/Documentatio … odules.txt
    svart_alg% make -C /home/nigro_alko/Kernel/linux-3.15.6 M=/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in
    make: Entering directory ‘/home/nigro_alko/Kernel/linux-3.15.6‘
    mkdir: cannot create directory ‘/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in’: Not a directory
    scripts/Makefile.build:44: /home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in/Makefile: Not a directory
    make[1]: *** No rule to make target ‘/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in/Makefile’. Stop.
    Makefile:1310: recipe for target ‘_module_/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in’ failed
    make: *** [_module_/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in] Error 2
    make: Leaving directory ‘/home/nigro_alko/Kernel/linux-3.15.6‘
    So is there any one that have time to help a lost little newbie i would bee very happy  :-)
    Last edited by Moosey_Linux (2014-07-29 15:00:40)

    karol wrote:Why do you want a custom kernel in the first place?
    Moosey_Linux wrote:i´m trying to learn how to build my own custom kernel
    Reason enough IMO. But anyway... you refer to the Traditional build method in the wiki, but is it possible you didn't really read it? Or maybe you only skimmed it? Did you run make menuconfig? Did you try to build everything in instead of using modules? That mkinitcpio output suggests that you did.
    As suggested there for first-timers, it's a good idea to start with a kernel configuration that is known to work - the Arch config is the obvious choice, but there are other sources e.g. http://kernel-seeds.org/ .

  • How to add page numbers (centred) at the foot of a page?

    Even this is confusing!
    I typed my question hit return and was told I couldn't post a blank message.
    How do I post my message?
    I simply want to know how to add a page number at the foot (centred) of a page.
    Oh! Great! Now I see, I should have known to scroll way down to find "post message".
    Anne

    What kind of document: word processing? Spreadsheet? something else?
    What program are you using to create the document?

  • An you tell me how to add an advanced action to the TEB so you can check for multiple lines of input

    an you tell me how to add an advanced action to the TEB so you can check for multiple lines of input? How do you add the advanced action?

    Can you elaborate your requirement?
    If you want to have a text wrapped around and enable a scroller for the same, you can achieve it by TEB properties and check the scroll bar option,
    Is this what you are looking to achieve?
    Thanks,
    Anjaneai

  • How to add more summary data in the MIP of Compensation workbench

    Hi all,
    In the MIP (incentive plan) of the compensation workbench, we need to add more summary data in the summary section. I checked that all the summary data in that section are stored in the table 'ben_cwb_summary'.
    Even we can change the VIEW object for that page (using extension), we can't retrieve it because the new summary data/information we need to add are not stored in the table 'ben_cwb_summary'. We need to write our query to summerize data.
    How to implement it?
    Thanks in advanced!
    Jane

    faiz2000 wrote:
    > How to add more one record in the same time?
    >
    > Please I need your help to add more one record in the
    same time, how can I do
    > that?
    >
    > I have only one text field and the value it is linked
    from other table, if
    > user he bushes bottoms the all data it will copy it to
    new record:
    >
    > Ex.: <input name="textfield" type="text"
    >
    value="<%=(Recordset1.Fields.Item("webgroup").Value)%>">
    >
    >
    Use "Repeat Region"
    Mick

  • How to add user defined tab in the Header level of T-Code O4NM?

    How to add user defined tab in the Header level of  T-Code O4NM?
    I tried with BADI but I cant able to find any BADI for it and also searched for screen exit too..

    Can you check the user exits,
    OIJNOM_N and OIJTKT_N
    Cheers,
    Balaji

  • How to add a document type for the residence status GB in infotype 48

    Hi Team,
    How to add a document type for the residence status GB in infotype 48.
    Please answer this  at the earliest.PFA screnshot.
    Thanks
    chris

    I believe there is a PDF doc which comes with the component (it should be at your harddrive when you install it), which describes everything you will need.
    In a nutshell, there are two types of relationship: sibling - sibling, parent - child (there are some more nuances, but it follows the same logic).
    A relationship is created between two existing items (not sure, if you can also create a relationship for a new checked in item, but it would be just a usability). You select the type of relationship and the item - I believe depending on the relationship you may start from either item. The dialog to start is INFO (display metadata) or UPDATE (update metadata).
    When a relationship is created you may watch it also from either end (again INFO is the starting point).
    It is quite self-explanatory, so if you have the component installed you may just play around with it for a while and that is it.

Maybe you are looking for

  • How can I prevent Mail from applying actions (moving/copying/flagging/marking read) to duplicate messages?

    I use Mail to check multiple accounts. When I receive the same e-mail in multiple accounts, actions applied to an e-mail in one account often (though not always) affect duplicate messages in other accounts. Example 1 Someone sends an e-mail to both m

  • XMII and RS-232 communication

    As most of us are aware xMII does not support RS-232 communication. Recently some customers have come up with requirements of interfacing weigh scales to SAP. Most of these weigh scales have only the RS-232 interfacing option. (I am not sure if these

  • Prepared statement parameter order?

    We have prepared statements for insert and update where changing the order of columns in the statement gives different results. Problem 1: For an update statements setting 8 column values via preparedStatement.executeUpdate, we got the following exce

  • How to  Read data base table at runtime

    Hi,   i have an internal table with two fields they are    tablename and field name. itab has some entries. like :   itab-table name   itab-fieldname   kna1              kunnr   mara              matnr   vbuk              vbeln   tvak              au

  • How to make iPad 2 apps

    I have an amazing idea for an app but I don't know how to make one. Can you help me