How to add a new character in code page

Hi,
I need to add a new character to existing code page in the upgraded system.
The character is latin small s with caron (u0161 ).
The character ID is 000161.
What is the byte sequence of the same?
Thanks and Regards
Shraddha

Use tranaction SCP .
Under segment , take the character sequence and include your new id value . Byte sequence in my opinion will be confirmed from the client .
Br,
Vijay.

Similar Messages

How to add a new character set encoding?

Hello,
can anybody please explain to me, how to add a new character set encoding to Mac OS Tiger?
I have two Mac laptops, a new one with Snow Leopard and an older one with Tiger, and on the old one i cannot use or enable anywhere the "Russian (DOS)" character set encoding, which i need to be able to use some old text files.
On the Snow Leopard, this encoding is present in the list of available encodings of TextWrangler, but not in TIger.
If i have understood correctly, this is not a problem of TextWrangler, and the same encodings are available systemwide.
So, the question is: how to add new encodings to Tiger (or to Mac OS in general)?
Thanks.

I think possibly that's in the Get Info window of Finder?
I don't think either that or the input menu have any effect on available encoding choices. Adding languages to system prefs/international/languages can do that, but once you have added Russian there, I don't know of any way to add an additional Russian encoding (there are quite a number of them).

How to add the new character in FDI1FDI2 Define/Change Reports?

Hi,
There are some fixed charcters defined in the T. Codes FDI1FDI2 Define/Change Reports, can we add the characters here based on which we can get teh desired output. If yes, hen please tell me how to add the characters?
Thanks in advance...
Regards
Nitin

thanks

How to add the new dep area in existing cod

Dear all,
how to add the new dep area in existing cod we are planing to implement the IFRS by using leading ledger and non leading ledger present we are using OL leading ledger
present we are using dep area 01 ,15
how to achive the parallel accounting in asset accounting how to add new dep area 30 in existing COD
if any document plz refer me

Hi Bhayyapu,
Please refer to the links given below.
New Depreciation area
Adding a New Depreciation Area to Existing Assets - Financial Accounting (FI) - SAP Library
Hope this will help you.
Regards
Eugene

How to add entire new row at the top of table in pdf report from c# windows forms using iTextSharp

Hi for past 3 days i was thinking and breaking my head on how to add entire new at top table created in pdf report from c# windows forms with iTextSharp.
First: I was able to create/export sql server data in form of table in pdf report from c# windows forms. Given below is the code in c#.
using System;
using System.Collections.Generic;
using System.Configuration;
using System.Text;
using System.Data;
using System.IO;
using System.Data.SqlClient;
using System.Windows.Forms;
using iTextSharp.text;
using iTextSharp.text.pdf;
namespace DRRS_CSharp
public partial class frmPDFTechnician : Form
public frmPDFTechnician()
InitializeComponent();
private void btnExport_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
PdfPTable inner = new PdfPTable(1);
inner.WidthPercentage = 115;
PdfPCell celt=new PdfPCell(new Phrase(new Paragraph("Institute/Hospital:AIIMS,NEW DELHI",FontFactory.GetFont("Arial",14,iTextSharp.text.Font.BOLD,BaseColor.BLACK))));
inner.AddCell(celt);
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(inner);
doc.Add(table);
doc.Close();
The code executes well with no problem and get all datas from tables into table in PDF report from c# windows forms.
But here is my problem how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
As the problem i am facing is my title or Header(DCS Clinical Report-Technician wise) is at top of my image named:logo5.png and not coming to it's center position of my image.
Second the problem i am facing is how to add new entire row to top of existing table in pdf report from c# windows form using iTextSharp?.
given in below is the row and it's data . So how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
as you can see how i create my columns in table in pdf report and populate it with sql server data. Given the code below:
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
So my question is how to make my column headers in bold?
So these are my questions.
1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?
I know that i have to do some modifications to my code but i dont know how to do it. Can anyone help me please.
Any help or guidance in solving this problem would be greatly appreciated.
vishal

Hi,
>>1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?<<
I’m sorry for the issue that you are hitting now.
This itextsharp is third party control, for this issue, I recommended to consult the control provider directly, I think they can give more precise troubleshooting.
http://sourceforge.net/projects/itextsharp/
Thanks for your understanding.
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to add a new line in SMS(Line Break).

Hi All,
I need to send SMS from PL\SQL Procedure
The problem i have been facing is that the string being passed in as sms content is not parsing a newline character.
It shows all content in one line.
I need to break them in several lines.
Give me a direction how to add a new line in SMS.
Regards,
Raj.

Hi,
Sure, Here it is
CREATE OR REPLACE PROCEDURE APPS.AUTO_SMS_RTV_REPORT
IS
sender          VARCHAR2(1000);
recipient     VARCHAR2(1000);
message          VARCHAR2(4000);
sub          VARCHAR2(1000)     := 'HELLO';
dt1          varchar2(1000)     := to_char(sysdate,'DD-MON-YY');
mailhost     VARCHAR2(30) := '10.7.7.xxx';
mail_conn     UTL_SMTP.CONNECTION;
v_crlf VARCHAR2(2) := CHR(13)||CHR(10);
CURSOR cur_Rejection_Records IS
               SELECT DISTINCT
                    rt.VENDOR_SITE_ID               ,
                    pvs.email_address     VENDOR_MAIL_ID     ,
                    pvs.PHONE          vendor_contact_no ,
                    hre.EMAIL_ADDRESS     Employee_mail_id ,
                    hre.FULL_NAME
               FROM apps.rcv_transactions      rt,
                    apps.po_vendors           pv,
                    apps.po_vendor_sites_all     pvs,
                    apps.mtl_transaction_reasons mtr,
                    apps.fnd_user          fu,
                    apps.hr_employees          hre
               WHERE transaction_type = 'RETURN TO VENDOR'
               --AND        TRUNC(rt.transaction_date) = TRUNC(SYSDATE)
               AND     rt.vendor_id          = pv.vendor_id
               AND     rt.vendor_site_id     = pvs.vendor_site_id
               AND     rt.REASON_ID          = mtr.REASON_ID(+)
               AND fu.user_id          = rt.last_updated_by
               AND hre.EMPLOYEE_ID     = fu.EMPLOYEE_ID
               AND TRANSACTION_ID IN (
                              11902189,
                              11902253,
                              11902148)
BEGIN
     FOR rec_Rejection_Records IN cur_Rejection_Records
     LOOP
     Begin
          sender     := '<[email protected]>';
          recipient     := rec_Rejection_Records.vendor_contact_no || '@aaaa.com';
          mail_conn := utl_smtp.open_connection(mailhost, 8025);
          utl_smtp.helo(mail_conn, mailhost);
          utl_smtp.mail(mail_conn, sender);
          utl_smtp.rcpt(mail_conn, recipient);
          utl_smtp.DATA(     mail_conn,
                              'Date: ' || TO_CHAR(SYSDATE, 'Dy, DD Mon YYYY hh24:mi:ss') || utl_tcp.crlf ||
                              'From: ' || sender     || utl_tcp.crlf ||
                              'Subject: '|| sub     || utl_tcp.crlf ||
                              'To: ' || recipient || utl_tcp.crlf ||
                              utl_tcp.crlf ||
                              'Dear Supplier,'||CHR(10)|| utl_tcp.crlf ||'\\\0x0A'|| -- HERE I NEED LINE BREAK
                              'Please.'|| utl_tcp.crlf
          DBMS_OUTPUT.PUT_LINE('Yep !!! SMS Sent Sucessfully :) ');
          utl_smtp.quit(mail_conn);
     EXCEPTION
          WHEN UTL_SMTP.PERMANENT_ERROR THEN
                    dbms_output.put_line('Error - ' || SQLCODE || ' - ' || SQLERRM);
          WHEN OTHERS THEN
                    dbms_output.put_line('Error - ' || SQLCODE || ' - ' || SQLERRM);
     END;
     END LOOP;
END AUTO_SMS_RTV_REPORT;
/

How to add a new Tab in XD02 Transaction

Hi all,
How to add a new Tab in XD02 Transaction. please explain step by step.
Thanks

Hi Anil
Goto T code OBD2 select your account type for which you want new tab. Click on details button above.
On next screen you can see "Field status" box.
Select (double click) on the view (i.e. General data or CC data or Sales data) in which you want to add new tab.
Again on next screen double click on the field present under "Select group" box.
On next screen go ahead with your settings, i.e. which fields you want and how.
Save the changes. Goto XD01 and test the same.
try and revert

How to add a new column to specific position

Hi,
How to add a new column to specified position in a existing table.
I have using the oracle database 10g.
This below code is not working in oracle 10 g
example:
ALTER TABLE EMPLOYEE ADD DEPT NUMBER FIRST:
ALTER TABLE EMPLOYEE ADD DEPT NUMBER AFTER JOB:
Please provide the correct syntax.

Hi,
When you add a column to the existing table, the column added i.e., for ex updatedon appers in the last. If you want the columns to be
displayed in Specific order. Just give the column names in the SELECT.. statement.
For your Information, But it is not good in Table design. Just to give something useful.
If you want to add a column at a specified position,
Rename the position column to the new column name
For Ex: (OLD_COLUMN_NAME-Hiredate)
ALTER TABLE EMP RENAME COLUMN OLD_COLUMN_NAME TO TEMP_HIREDATE;Add a New Column to Table
ALTER TABLE EMP ADD LAST_DATE DATE;Then, Alter the Table to rename the new column that is added.
ALTER TABLE EMP RENAME COLUMN LAST_DATE TO OLD_COLUMN_NAME;And, Rename TEMP_HIREDATE to your actual collumn.
ALTER TABLE EMP RENAME COLUMN TEMP_HIREDATE TO LAST_DATE;In practise, this won't be a good approach but you can get something useful about renaming the
column atleast.
Thanks,
Shankar

Hi All ,How to add a new field for MEDRUCK if we havea ZMEDRUCK

Hi All ,
        How to add a new field for MEDRUCK if we have a ZMEDRUCK
Req: If I want to add a new field for the following text editor line :
IN MAIN WINDOW > TEXT EDITOR> SERCH FOR TOTAL_AMOUNT-->
In that we will have
&ekko-waers&    &komkfkwrt&
(currency)       (numerics)
Pls send the Code to make these changes .Pls its urgent
Thanks&Regards.
Bharat.

Hi
If that field which you wants to add is available in one of the structures like EKKO,EKPO then you can add that field just beside the other fields
If that field is not there in the any of the structures then you can define a variable using define command
/: DEFINE &VAR&
/ &VAR& = <some value>
or you can write subroutines to fetch the data from outside tables and can use those fields data in the script
<b>Reward points for useful Answers</b>
Regards
Anji

SQL Server Distributed Partitioning Views how to add a new node online

We are using distributed partitioning views in SQL Server 2012 Enterprise Edition for scaling out our data across more than one servers. Now we faced to question how to add a new node (server) into the scale outed db servers system without sending the servers
down, so our users will be able to use them during the process as well.
For example we have 4 servers with scaled out data. When we add the new empty server, the CHECKINGs for the partitioning columns should be reorganized. But during the process the partitioning views are not working.
The High Availability, Always On or Failover Cluster approaches seem are not resolve the problems.
So my question is how to add new node online?
KH

Thank you Erland for the reply.
Yes, it's sounds as possible solution but has some not resolvable nuance in it. Let's say we copied some data from Node5 to new added Node6. Let's assume in Node5 we had data in Table1 with partitioning column's values 100,101,102,103,104,105,106. Now
we want to copy part of the rows with partitioning column's values 103,104,105,106 from Node5.Table1 into Node6.Table1. With this Node5 will contain less data and will work more quickly (less IO, less CPU usage etc), and the rest data will be contained on
Node6. But because of Node5 is already in use, the Node5.Table1 contains CHECK CONSTRAINT = ParttionColumn should be from 100 up to 106. This is check for Node5. The Distributed Partitioning Views are already using the CHECKs to identify what server should
be used to get data from.
Now when we copied part of the Node5.Table1 rows to Node6.Table1 the views are still using the 103-106 rows from Node5.Table1 because the CHECK points there. Then we include the newest Node6.Table1 in the distributed partitioning views. OK, but we should
set some CHECK on new Node6.Table1 which will be used by views. We can't set intersecting checking like Node5 has CHECK 100-106 and Node6 has CHECK 103-106. We also can't edit Node5 check and set it 100-102 untill the data will be removed in it. But this means
that the data will not be available during the execution.
So, any ideas ?
KH

How to add a new column (Project Number) in the action items table under NPD Module?

There are two projects with same name and created by same person in NPD.
So when it is displayed in "Action Items" table, It looks similar.
To avoid this, I need one more column (Project Number) to be added in the "Action Items" table and " Strategic briefs and projects" table.
So, How to add a new column (Project Number) in the "Action Items" table and " Strategic briefs and projects" table under NPD Module?
Please do the needful.

There is no out of the box configuration available to add columns to NPD action items. As always we welcome enhancement requests.
Thanks
Kelly

How to add a new field in MM01, with say contaminent as a field?

How to add a new field in MM01, with say contaminent as a field? I process that i know is i has to go the user exit and check out the three user exits that are available for MM01 after that what i have to do please can any one help me out with the procedure to proceed?

Hai venkateshwar reddy ,
try with these user exits
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
Refer these steps also
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/screen-exit-on-mm01-mm02-mm03-322717#

How to add a new tab for the project?

Dear All Experts,
    Could you tell me how to add a new tab for the project?
    Pls refer to the screenshot as below:
Thanks!
Xinling Zhang

Hi,
    The new tab in cj20n , and the new tab can only be displayed in the highed level.Pls refer to below
    And in cj02, there is no this tab also in the wbs detailed screen,
Thanks!
Xinling

Urgent - How to add a new control instead of tabs in JTabbedPane

Hi,
Please give me an idea or a sample program for how to add a new control
in JTabbedpane instead of tabs that means overlay any Java controls or pane
in the tabpane empty place next to tabs

"Urgent" is not relevant to the question. Your question is no more important than anybody elses.
My answer in this posting show a limited solution:
http://forum.java.sun.com/thread.jspa?forumID=57&threadID=636289
Otherwise I suggest you try using a layered pane approach:
http://java.sun.com/docs/books/tutorial/uiswing/components/layeredpane.html

How to add a new data element for existing table filed(Primary key field)

Hi Experts,
How to add a new data element for existing table field(Primary key field)
For this filed ther is no foreign key relation ships and even check table.
while activating table it is giving message like below.
can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)
Primary key change not permitted for value table /TC/VENDOR
Check on table /TC/VENDOR resulted in errors
Thanks
Ravi

Hi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob

How to add a new character in code page

Similar Messages

Maybe you are looking for