How to add a new character set encoding?

Hello,
can anybody please explain to me, how to add a new character set encoding to Mac OS Tiger?
I have two Mac laptops, a new one with Snow Leopard and an older one with Tiger, and on the old one i cannot use or enable anywhere the "Russian (DOS)" character set encoding, which i need to be able to use some old text files.
On the Snow Leopard, this encoding is present in the list of available encodings of TextWrangler, but not in TIger.
If i have understood correctly, this is not a problem of TextWrangler, and the same encodings are available systemwide.
So, the question is: how to add new encodings to Tiger (or to Mac OS in general)?
Thanks.

I think possibly that's in the Get Info window of Finder?
I don't think either that or the input menu have any effect on available encoding choices. Adding languages to system prefs/international/languages can do that, but once you have added Russian there, I don't know of any way to add an additional Russian encoding (there are quite a number of them).

Similar Messages

  • How to add a new character in code page

    Hi,
    I need to add a new character to existing code page in the upgraded system.
    The character is latin small s with caron (u0161 ).
    The character ID is 000161.
    What is the byte sequence of the same?
    Thanks and Regards
    Shraddha

    Use tranaction SCP .
    Under segment , take the character sequence and include your new id value . Byte sequence in my opinion will be confirmed from the client .
    Br,
    Vijay.

  • How to add the new character in FDI1FDI2 Define/Change Reports?

    Hi,
    There are some fixed charcters defined in the T. Codes FDI1FDI2 Define/Change Reports, can we add the characters here based on which we can get teh desired output. If yes, hen please tell me how to add the characters?
    Thanks in advance...
    Regards
    Nitin

    thanks

  • Is it possible to add new character set encodings?

    Hello,
    is it possible to add new character set encodings in Mac OS?
    Practically, i need to add "Russian (DOS)" encoding to Tiger, but is it at all possible even in newer versions of Mac OS?
    Where to find the missing encodings and how to install them?
    Google search did not return much.
    Thanks.

    Well, it was a general question about possibility of adding new encodings in Mac OS, but i posted a more specific question about Tiger here:
    http://discussions.apple.com/thread.jspa?threadID=2692557&tstart=0
    On Tiger i do not have Russian (DOS) in TextEdit, only Cyrillic (DOS).
    The same about TextWrangler on Tiger.
    Strangely, i have Russian (DOS) in TeXShop on Tiger.

  • How to change the character set encoding not being a superset one

    HI, i have a fresh installed database, but i realize the character set support in my client is not good enough, since its a not production database i want to change the character set encoding to anothor one not being a superset of the old one.
    I have tried the "ALTER DATABASE CHARACTER SET WE8MSWIN1252" but it fails claiming i need a superset one.
    I guess its just a single steps to do it, i have all the privileges, just not the time to reinstall and setup everything.

    Do you know what that does to the existing data, though? My hunch would be that any characters which have a different binary representation in the source & target character sets would be corrupted.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • SQL Server Distributed Partitioning Views how to add a new node online

    We are using distributed partitioning views in SQL Server 2012 Enterprise Edition for scaling out our data across more than one servers. Now we faced to question how to add a new node (server) into the scale outed db servers system without sending the servers
    down, so our users will be able to use them during the process as well.
    For example we have 4 servers with scaled out data. When we add the new empty server, the CHECKINGs for the partitioning columns should be reorganized. But during the process the partitioning views are not working.
    The High Availability, Always On or Failover Cluster approaches seem are not resolve the problems.
    So my question is how to add new node online?
    KH

    Thank you Erland for the reply.
    Yes, it's sounds as possible solution but has some not resolvable nuance in it. Let's say we copied some data from Node5 to new added Node6. Let's assume in Node5 we had data in Table1 with partitioning column's values 100,101,102,103,104,105,106.  Now
    we want to copy part of the rows with partitioning column's values 103,104,105,106 from Node5.Table1 into Node6.Table1. With this Node5 will contain less data and will work more quickly (less IO, less CPU usage etc), and the rest data will be contained on
    Node6. But because of Node5 is already in use, the Node5.Table1 contains CHECK CONSTRAINT = ParttionColumn should be from 100 up to 106. This is check for Node5. The Distributed Partitioning Views are already using the CHECKs to identify what server should
    be used to get data from.
    Now when we copied part of the Node5.Table1 rows to Node6.Table1 the views are still using the 103-106 rows from Node5.Table1 because the CHECK points there. Then we include the newest Node6.Table1 in the distributed partitioning views. OK, but we should
    set some CHECK on new Node6.Table1 which will be used by views. We can't set intersecting checking like Node5 has CHECK 100-106 and Node6 has CHECK 103-106. We also can't edit Node5 check and set it 100-102 untill the data will be removed in it. But this means
    that the data will not be available during the execution. 
    So, any ideas ?
    KH

  • How to add a new line in SMS(Line Break).

    Hi All,
    I need to send SMS from PL\SQL Procedure
    The problem i have been facing is that the string being passed in as sms content is not parsing a newline character.
    It shows all content in one line.
    I need to break them in several lines.
    Give me a direction how to add a new line in SMS.
    Regards,
    Raj.

    Hi,
    Sure, Here it is
    CREATE OR REPLACE PROCEDURE APPS.AUTO_SMS_RTV_REPORT
    IS
    sender          VARCHAR2(1000);
    recipient     VARCHAR2(1000);
    message          VARCHAR2(4000);
    sub          VARCHAR2(1000)     := 'HELLO';
    dt1          varchar2(1000)     := to_char(sysdate,'DD-MON-YY');
    mailhost     VARCHAR2(30) := '10.7.7.xxx';     
    mail_conn     UTL_SMTP.CONNECTION;
    v_crlf VARCHAR2(2) := CHR(13)||CHR(10);
    CURSOR cur_Rejection_Records IS
                   SELECT DISTINCT
                        rt.VENDOR_SITE_ID               ,
                        pvs.email_address     VENDOR_MAIL_ID     ,
                        pvs.PHONE          vendor_contact_no ,
                        hre.EMAIL_ADDRESS     Employee_mail_id ,
                        hre.FULL_NAME
                   FROM apps.rcv_transactions      rt,
                        apps.po_vendors           pv,
                        apps.po_vendor_sites_all     pvs,
                        apps.mtl_transaction_reasons mtr,
                        apps.fnd_user          fu,
                        apps.hr_employees          hre     
                   WHERE transaction_type = 'RETURN TO VENDOR'
                   --AND        TRUNC(rt.transaction_date) = TRUNC(SYSDATE)
                   AND     rt.vendor_id          = pv.vendor_id
                   AND     rt.vendor_site_id     = pvs.vendor_site_id
                   AND     rt.REASON_ID          = mtr.REASON_ID(+)
                   AND fu.user_id          = rt.last_updated_by
                   AND hre.EMPLOYEE_ID     = fu.EMPLOYEE_ID
                   AND TRANSACTION_ID IN (
                                  11902189,
                                  11902253,
                                  11902148)
    BEGIN
         FOR rec_Rejection_Records IN cur_Rejection_Records
         LOOP
         Begin
              sender     := '<[email protected]>';
              recipient     := rec_Rejection_Records.vendor_contact_no || '@aaaa.com';
              mail_conn := utl_smtp.open_connection(mailhost, 8025);
              utl_smtp.helo(mail_conn, mailhost);
              utl_smtp.mail(mail_conn, sender);
              utl_smtp.rcpt(mail_conn, recipient);
              utl_smtp.DATA(     mail_conn,
                                  'Date: ' || TO_CHAR(SYSDATE, 'Dy, DD Mon YYYY hh24:mi:ss') || utl_tcp.crlf ||
                                  'From: ' || sender     || utl_tcp.crlf ||
                                  'Subject: '|| sub     || utl_tcp.crlf ||
                                  'To: ' || recipient || utl_tcp.crlf ||
                                  utl_tcp.crlf ||
                                  'Dear Supplier,'||CHR(10)|| utl_tcp.crlf ||'\\\0x0A'|| -- HERE I NEED LINE BREAK
                                  'Please.'|| utl_tcp.crlf                          
              DBMS_OUTPUT.PUT_LINE('Yep !!! SMS Sent Sucessfully :) ');
              utl_smtp.quit(mail_conn);
         EXCEPTION
              WHEN UTL_SMTP.PERMANENT_ERROR THEN
                        dbms_output.put_line('Error - ' || SQLCODE || ' - ' || SQLERRM);
              WHEN OTHERS THEN
                        dbms_output.put_line('Error - ' || SQLCODE || ' - ' || SQLERRM);
         END;
         END LOOP;
    END AUTO_SMS_RTV_REPORT;
    /

  • How to add a new universe in population for Predictive Analysis

    Post Author: izhar
    CA Forum: Performance Management and Dashboards
    Hi all members I am working on BOXI R2, SP2 I have to ask that, How to add a new universe in population for "Predictive Analysis". Currently i can only view universe of "Direct Customers and Direct Products"
    Any member please help me hereRegards Izhar

    Hi Anne,
    It really depends on how your portal is set up. And there are 101 ways this could have been done.
    I've used the Home Page Framework as an easy to define and extend framework to show applications. I've used it both for ESS and MSS, Using the HPF requires that an application has an iView in the portal.
    The main point to be made here is that this is not a Web Dynpro ABAP specific question - but rather one about MSS portal implementation - you would probably be better posting a question in either one of the ESS/MSS or Portal forums.
    As it is not a WDA specific question, I'd ask that you kindly close this thread and reopen in another forum.
    Thanks for your understanding, it would be nice to be able to answer all questions in all forums (perhaps with some sort of tagging system) but currently forum rules are that questions must be specific to the forum posted.
    Thanks,
    Chris

  • ORA-12712: new character set must be a superset of old character ...-

    Dear all ,
    i have a problem with oracle database,
    server configuration oracle 10g, solaris 9, sparc processor 64 bit,
    i altered database character set to UTF8, whe i return database to old seeting ISO 8859-6
    i got this error ORA-12712: new character set must be a superset of old character set.
    anyone can help me and let me know how can i solve this error?
    thanks
    Gasir

    You should recreate a new database and use export/import to transfer data from the existing UTF8 database to the new ISO 8859-6 database according to the ]Globalization Guide.

  • How to  add a new System status?

    Hi,
    I am working on the Bid invitation process. When we process the Bid submitted, we have 'approve' , 'reject' buttons which when clicked wil set the system status to 'I1014' & I1013' respectively.these r maintained in TJ02.
      I have added one more button called 'Interim approval' for the bid. I want to set a system status whn this button is clicked.
    My question is how to add a new system status to the  existing list?
    Plz help me in solving this...
    Thanks,
    Sivagami.R

    Hi Sivagami,
    Why you want to add a new system status,what is the business need.
    I will ask you to look a sdn thread on this issue
    Selection of approvers for Bid
    and standard workflow behavior on this process.
    http://help.sap.com/saphelp_srm30/helpdata/en/33/16533d6dd60610e10000000a114084/content.htm
    regards,nishant
    Please reward points if this helps.

  • Character  set Encoding

    Hi,
    Everybody i just want to know default character set encoding that is
    use to store data in oracle 9i..
    or is there any difference between Mssqi2005 character set encoding and oracle 9i character set encoding.
    please reply................
    regard's
    paritosh tomar

    DarkFiBrE72 wrote:
    Its AL16UTF16,
    From metalink
    Starting in Oracle 9i the National Characterset (NLS_NCHAR_CHARACTERSET) will be
    limited to UTF8 and AL16UTF16.
    For more details refer to The National Character Set in Oracle 9i and 10g
    Any other NLS_NCHAR_CHARACTERSET will no longer be supported.
    When upgrading to 10g the value of NLS_NCHAR_CHARACTERSET is based
    on value currently used in the Oracle8 version.
    If the NLS_NCHAR_CHARACTERSET is UTF8 then new it will stay UTF8.
    In all other cases the NLS_NCHAR_CHARACTERSET is changed to AL16UTF16
    and -if used- N-type data (= data in columns using NCHAR, NVARCHAR2 orNCLOB )
    may need to be converted.
    Edited by: DarkFiBrE72 on Sep 24, 2008 7:12 PMI'm not sure if the OP was referring to the National character set? Is this implied by the corresponding SQL Server characterset mentioned?
    Otherwise I would assume we are talking about the Database character set, which allows numerous different character sets and types (single-byte, multi-byte, Unicode etc. depending on Oracle release).
    Regards,
    Randolf
    Oracle related stuff blog:
    http://oracle-randolf.blogspot.com/
    SQLTools++ for Oracle (Open source Oracle GUI for Windows):
    http://www.sqltools-plusplus.org:7676/
    http://sourceforge.net/projects/sqlt-pp/

  • How to add entire new row at the top of table in pdf report from c# windows forms using iTextSharp

    Hi for past 3 days i was thinking and breaking my head on how to add entire new at top table created in pdf report from c# windows forms with iTextSharp.
    First: I was able to create/export sql server data in form of table in pdf report from c# windows forms. Given below is the code in c#.
    using System;
    using System.Collections.Generic;
    using System.Configuration;
    using System.Text;
    using System.Data;
    using System.IO;
    using System.Data.SqlClient;
    using System.Windows.Forms;
    using iTextSharp.text;
    using iTextSharp.text.pdf;
    namespace DRRS_CSharp
    public partial class frmPDFTechnician : Form
    public frmPDFTechnician()
    InitializeComponent();
    private void btnExport_Click(object sender, EventArgs e)
    Document doc = new Document(PageSize.A4.Rotate());
    var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
    doc.SetMargins(50, 50, 50, 50);
    doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
    doc.Open();
    PdfPTable table = new PdfPTable(7);
    table.TotalWidth=585f;
    table.LockedWidth = true;
    PdfPTable inner = new PdfPTable(1);
    inner.WidthPercentage = 115;
    PdfPCell celt=new PdfPCell(new Phrase(new Paragraph("Institute/Hospital:AIIMS,NEW DELHI",FontFactory.GetFont("Arial",14,iTextSharp.text.Font.BOLD,BaseColor.BLACK))));
    inner.AddCell(celt);
    Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
    para.Alignment = iTextSharp.text.Element.TITLE;
    iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
    png.ScaleToFit(95f, 95f);
    png.Alignment = Element.ALIGN_RIGHT;
    SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
    SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
    conn.Open();
    SqlDataReader dr;
    dr = cmd.ExecuteReader();
    table.AddCell("ID");
    table.AddCell("First Name");
    table.AddCell("Middle Name");
    table.AddCell("Last Name");
    table.AddCell("DOB" );
    table.AddCell("Gender");
    table.AddCell("Designation");
    while (dr.Read())
    table.AddCell(dr[0].ToString());
    table.AddCell(dr[1].ToString());
    table.AddCell(dr[2].ToString());
    table.AddCell(dr[3].ToString());
    table.AddCell(dr[4].ToString());
    table.AddCell(dr[5].ToString());
    table.AddCell(dr[6].ToString());
    dr.Close();
    table.SpacingBefore = 15f;
    doc.Add(para);
    doc.Add(png);
    doc.Add(inner);
    doc.Add(table);
    doc.Close();
    The code executes well with no problem and get all datas from tables into table in PDF report from c# windows forms.
    But here is my problem how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
    As the problem i am facing is my title or Header(DCS Clinical Report-Technician wise) is at top of my image named:logo5.png and not coming to it's center position of my image.
    Second the problem i am facing is how to add new entire row to top of existing table in pdf report from c# windows form using iTextSharp?.
    given in below is the row and it's data . So how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
    as you can see how i create my columns in table in pdf report and populate it with sql server data. Given the code below:
    Document doc = new Document(PageSize.A4.Rotate());
    var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
    doc.SetMargins(50, 50, 50, 50);
    doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
    doc.Open();
    PdfPTable table = new PdfPTable(7);
    table.TotalWidth=585f;
    table.LockedWidth = true;
    Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
    para.Alignment = iTextSharp.text.Element.TITLE;
    iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
    png.ScaleToFit(95f, 95f);
    png.Alignment = Element.ALIGN_RIGHT;
    SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
    SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
    conn.Open();
    SqlDataReader dr;
    dr = cmd.ExecuteReader();
    table.AddCell("ID");
    table.AddCell("First Name");
    table.AddCell("Middle Name");
    table.AddCell("Last Name");
    table.AddCell("DOB" );
    table.AddCell("Gender");
    table.AddCell("Designation");
    while (dr.Read())
    table.AddCell(dr[0].ToString());
    table.AddCell(dr[1].ToString());
    table.AddCell(dr[2].ToString());
    table.AddCell(dr[3].ToString());
    table.AddCell(dr[4].ToString());
    table.AddCell(dr[5].ToString());
    table.AddCell(dr[6].ToString());
    dr.Close();
    table.SpacingBefore = 15f;
    doc.Add(para);
    doc.Add(png);
    doc.Add(table);
    doc.Close();
    So my question is how to make my column headers in bold?
    So these are my questions.
    1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
    2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
    3.how to make my column headers in bold?
    I know that i have to do some modifications to my code but i dont know how to do it. Can anyone help me please.
    Any help or guidance in solving this problem would be greatly appreciated.
    vishal

    Hi,
    >>1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
    2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
    3.how to make my column headers in bold?<<
    I’m sorry for the issue that you are hitting now.
    This itextsharp is third party control, for this issue, I recommended to consult the control provider directly, I think they can give more precise troubleshooting.
    http://sourceforge.net/projects/itextsharp/
    Thanks for your understanding.
    Regards,
    Marvin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to add a new column (Project Number) in the action items table under NPD Module?

    There are two projects with same name and created by same person in NPD.
    So when it is displayed in "Action Items" table, It looks similar.
    To avoid this, I need one more column (Project Number) to be added in the "Action Items" table and " Strategic briefs and projects" table.
    So, How to add a new column (Project Number) in the "Action Items" table and " Strategic briefs and projects" table under NPD Module?
    Please do the needful.

    There is no out of the box configuration available to add columns to NPD action items.   As always we welcome enhancement requests. 
    Thanks
    Kelly

  • How to add a new field in MM01, with say contaminent  as a field?

    How to add a new field in MM01, with say contaminent  as a field? I process that i know is i has to go the user exit and check out the three user exits that are available for MM01 after that what i have to do please can any one help me out with the procedure to proceed?

    Hai      venkateshwar reddy ,
    try with these user exits
    MGA00001 Material Master (Industry): Checks and Enhancements
    MGA00002 Material Master (Industry): Number Assignment
    MGA00003 Material Master (Industry and Retail): Number Display
    Refer these steps also
    http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/screen-exit-on-mm01-mm02-mm03-322717#

  • How to add a new tab for the project?

    Dear All Experts,
        Could you tell me how to add a new tab for the project?
        Pls refer to the screenshot as below:
    Thanks!
    Xinling Zhang

    Hi,
        The new tab in cj20n , and the new tab can only be displayed in the highed level.Pls refer to below
        And in cj02, there is no this tab also in the wbs detailed screen,
    Thanks!
    Xinling

Maybe you are looking for