How to add a new database service name to 9iDS

Hello,
I installed 9iDS and 9iDB on my laptop which worked fine for few months. I had trouble with 9iDB I/O system so I reinstalled 9iDB with a new SID name. I updated 9iDS by replacing old SID name with new SID name in tnsnames.ora file but it did not work.
Please someone suggest where should I update in 9iDS to access my newly installed database service with new SID so that forms appication builder can connect properly.
Currently it is saying :
ORA-12514: tns listener could not resolve service name given in connect descriptor.
Thanks,
[email protected]

Shyam,
could it be that you are still starting the old database tnslistener. Please make sure that you start the listener for your new Db instance.
Frank

Similar Messages

How to use the default database service name on creating procedure for data

how to use the default database service name on creating procedure for datagaurd client failover ??? all oracle doc says create a new service as below and enable at DB startup. but our client is using/wanted database default service to connect from application on the datagaurd environment (rac to non rac setup).please help.
Db name is = prod.
exec DBMS_SERVICE.CREATE_SERVICE (service_name => 'prod',network_name =>'prod',failover_method => 'BASIC',failover_type => 'SELECT',failover_retries => 180,failover_delay => 1);
says already the service available.
CREATE OR REPLACE TRIGGER manage_dgservice after startup on database DECLARE role
VARCHAR(30);BEGIN SELECT DATABASE_ROLE INTO role FROM V$DATABASE;
IF role = 'NO' THEN DBMS_SERVICE.START_SERVICE('prod');
END IF;
END;
says trigger created, but during a swithover still the service is listeneing on listener.
tns entry.
prod =
(DESCRIPTION =
(ADDRESS_LIST =
(LOAD_BALANCE = YES)
(ADDRESS = (PROTOCOL = TCP)(HOST = prod1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = prod2)(PORT = 1521)) ---> primary db entry
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = proddr)(PORT = 1521)) --> DR DB entry
(CONNECT_DATA =
(SERVICE_NAME = prod)
thanks in advance.
Edited by: 854393 on Dec 29, 2012 11:52 AM

Hello;
So in the example below replace "ernie" with the alias you want the client to use.
I can show you how I do it :
First an entry need to be added to the client tnsnames.ora that uses a SERVICE_NAME instead of a SID.
ernie =
(DESCRIPTION =
    (ADDRESS_LIST =
       (ADDRESS = (PROTOCOL = TCP)(HOST = Primary.host)(PORT = 1521))
       (ADDRESS = (PROTOCOL = TCP)(HOST = Standby.host)(PORT = 1521))
       (CONNECT_DATA =
       (SERVICE_NAME = ernie)
)Next the service 'ernie' needs to be created manually on the primary database.
BEGIN
   DBMS_SERVICE.CREATE_SERVICE('ernie','ernie');
END;
/After creating the service needs to be manually started.
BEGIN
   DBMS_SERVICE.START_SERVICE('ernie');
END;
/Several of the default parameters can now be set for 'ernie'.
BEGIN
   DBMS_SERVICE.MODIFY_SERVICE
   ('ernie',
   FAILOVER_METHOD => 'BASIC',
   FAILOVER_TYPE => 'SELECT',
   FAILOVER_RETRIES => 200,
   FAILOVER_DELAY => 1);
END;
/Finally a database STARTUP trigger should be created to ensures that this service is only offered if the database is primary.
CREATE TRIGGER CHECK_ERNIE_START AFTER STARTUP ON DATABASE
DECLARE
V_ROLE VARCHAR(30);
BEGIN
SELECT DATABASE_ROLE INTO V_ROLE FROM V$DATABASE;
IF V_ROLE = 'PRIMARY' THEN
DBMS_SERVICE.START_SERVICE('ernie');
ELSE
DBMS_SERVICE.STOP_SERVICE('ernie');
END IF;
END;
/lsnrctl status - should show the new service.
When I do this the Database will still register with the listener. I don't give that to the clients. That one will still be available but nobody knows about it. Meanwhile "ernie" moves with the database role.
So in my example the default just hangs out in the background.
Best Regards
mseberg
Edited by: mseberg on Dec 29, 2012 3:51 PM

How to add a new data element for existing table filed(Primary key field)

Hi Experts,
How to add a new data element for existing table field(Primary key field)
For this filed ther is no foreign key relation ships and even check table.
while activating table it is giving message like below.
can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)
Primary key change not permitted for value table /TC/VENDOR
Check on table /TC/VENDOR resulted in errors
Thanks
Ravi

Hi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob

How to add a new column to specific position

Hi,
How to add a new column to specified position in a existing table.
I have using the oracle database 10g.
This below code is not working in oracle 10 g
example:
ALTER TABLE EMPLOYEE ADD DEPT NUMBER FIRST:
ALTER TABLE EMPLOYEE ADD DEPT NUMBER AFTER JOB:
Please provide the correct syntax.

Hi,
When you add a column to the existing table, the column added i.e., for ex updatedon appers in the last. If you want the columns to be
displayed in Specific order. Just give the column names in the SELECT.. statement.
For your Information, But it is not good in Table design. Just to give something useful.
If you want to add a column at a specified position,
Rename the position column to the new column name
For Ex: (OLD_COLUMN_NAME-Hiredate)
ALTER TABLE EMP RENAME COLUMN OLD_COLUMN_NAME TO TEMP_HIREDATE;Add a New Column to Table
ALTER TABLE EMP ADD LAST_DATE DATE;Then, Alter the Table to rename the new column that is added.
ALTER TABLE EMP RENAME COLUMN LAST_DATE TO OLD_COLUMN_NAME;And, Rename TEMP_HIREDATE to your actual collumn.
ALTER TABLE EMP RENAME COLUMN TEMP_HIREDATE TO LAST_DATE;In practise, this won't be a good approach but you can get something useful about renaming the
column atleast.
Thanks,
Shankar

How to add entire new row at the top of table in pdf report from c# windows forms using iTextSharp

Hi for past 3 days i was thinking and breaking my head on how to add entire new at top table created in pdf report from c# windows forms with iTextSharp.
First: I was able to create/export sql server data in form of table in pdf report from c# windows forms. Given below is the code in c#.
using System;
using System.Collections.Generic;
using System.Configuration;
using System.Text;
using System.Data;
using System.IO;
using System.Data.SqlClient;
using System.Windows.Forms;
using iTextSharp.text;
using iTextSharp.text.pdf;
namespace DRRS_CSharp
public partial class frmPDFTechnician : Form
public frmPDFTechnician()
InitializeComponent();
private void btnExport_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
PdfPTable inner = new PdfPTable(1);
inner.WidthPercentage = 115;
PdfPCell celt=new PdfPCell(new Phrase(new Paragraph("Institute/Hospital:AIIMS,NEW DELHI",FontFactory.GetFont("Arial",14,iTextSharp.text.Font.BOLD,BaseColor.BLACK))));
inner.AddCell(celt);
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(inner);
doc.Add(table);
doc.Close();
The code executes well with no problem and get all datas from tables into table in PDF report from c# windows forms.
But here is my problem how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
As the problem i am facing is my title or Header(DCS Clinical Report-Technician wise) is at top of my image named:logo5.png and not coming to it's center position of my image.
Second the problem i am facing is how to add new entire row to top of existing table in pdf report from c# windows form using iTextSharp?.
given in below is the row and it's data . So how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
as you can see how i create my columns in table in pdf report and populate it with sql server data. Given the code below:
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
So my question is how to make my column headers in bold?
So these are my questions.
1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?
I know that i have to do some modifications to my code but i dont know how to do it. Can anyone help me please.
Any help or guidance in solving this problem would be greatly appreciated.
vishal

Hi,
>>1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?<<
I’m sorry for the issue that you are hitting now.
This itextsharp is third party control, for this issue, I recommended to consult the control provider directly, I think they can give more precise troubleshooting.
http://sourceforge.net/projects/itextsharp/
Thanks for your understanding.
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to add a new column (Project Number) in the action items table under NPD Module?

There are two projects with same name and created by same person in NPD.
So when it is displayed in "Action Items" table, It looks similar.
To avoid this, I need one more column (Project Number) to be added in the "Action Items" table and " Strategic briefs and projects" table.
So, How to add a new column (Project Number) in the "Action Items" table and " Strategic briefs and projects" table under NPD Module?
Please do the needful.

There is no out of the box configuration available to add columns to NPD action items. As always we welcome enhancement requests.
Thanks
Kelly

How to add a new element to a model node in the view controller?

View Context
    myNode
         attri1
         attri2
myNode is a web service model node. How to add a new element to this node?
Regards,
Hui
Edited by: Hui Wang on Feb 15, 2008 12:05 PM

Sudhir Gorantla wrote:>
> Hi,
>
> myNode
> attri1
> attri2
>
> IMyNodeElement ele=wdContext.myNode().createMyNodeElement();
>
> ele.setAttri1("");
> ele.setAttri2("");
>
> wdContext.nodeMyNode().addElement(ele);
>
> Regards,
> Sudhir
Hi we need a model as an input parameter when creating a element for a model node. How to get the instance of the model?
Regards,
Hui

How to create a new database in SUP

Hi,
Iam using SUP 2.1 ESD#1 licensed version
How to create a new database other than the default sampleDB.
Thanks,
B.Ushasri

Hi B.Ushasri,
This is actually pretty easy.
1) open the Unwired Workspace (SDK in eclipse).
2) Bottom right, add a new Database connection with the following details:
           Sybase ASA v12.x,
           host=Your Sup box,
           port=5500,
           user=dba
           password= Your password (default = dba)
3) Once you connect successfully, right click on the connection and choose the "Create database" option.
That should do it for you. It is the same connection as the sampleDB connection so if you already have that defined then its a simple, right click on it once connected and hit create database.
Hope that helps,
Brenton.

Resolve database service name using in SQL

Hi all!
My question is:
Is it possible to resolve database service name (e.g. TNS) from SQL only (without logging into the server with oracle user and execute tnsping)?
I'll give you a bit background about my question:
In DataGuard, if you query v$archive_dest, you can see the SERVICE NAME of the standby database in the STANDBY records. I would like to know what is the real server name and database instance of the standby database.
I don't want to login to the primary server with oracle user (let's say that I can not - it's a program really, not me...).
Let's also say that the only user I have is a read-only user to the database (with grants to all tables and views, but cannot execute privileged DBMS sys packages).
Running "SQL> host tnsping NAME" doesn't do the job, since this is only for SQL plus.
Doe's anyone have any idea? maybe v$ view that contains the TNS resolution (tried to find, no success)? maybe a tnsping alike command/function?
Thanks a lot!
Maayan

MaayanB wrote:
I'll explain the reason.
I'm working on an agentless product that connects to databases, storage and hosts, and models them into a small CMDB.
Since my product needs to model the "STANDBY" relationship between primary and standby DataGuard databases - I need to be able to resolve the value of the "DESTINATION" field from "V$ARCHIVE_DEST", where TARGET IN ('STANDBY','REMOTE').
I could login to the server and execute "tnsping DBNAME", but the problem is that when a server has more than one ORACLE_HOME (hence, more than one tnsname.ora file), I need to make sure that the user I'm using to login to the server has all environment variables conigured properly for each database installed on the server (BTW, the unix user is also a "naked" user with no privileges except the sudo's defined for it).
So I assume that the best way to be sure that the environment variables are correctly defined is when I login to the database.
This is the reason I need to resolve service names using SQL.
BTW, the database process somehow uses the Oracle Net Services to resolve the same value when it sends the redo log files to the standby server - and I'd like to resolve it the same way (or other, if not possible). If it uses the sys privileges, and it executes the package that lets you execute something on the server ("tnsping", in this case), and this is the only way it can be done - I need to start thinking on a different way to resolve the problem.What you are missing is that when "the database process somehow uses the Oracle Net Services to resolve the same value when it sends the redo . . ." is that Net services is NOT just resolving the name for the database. It is also handling the actual transport of the files. That name resolution is not passed back to the database.
>
Anyway, I'm not a hacker or something alike, It's just that my product doesn't know how to pick up the phone and dial :)

DATABASE SERVICE NAME

HOW TO GET DATABASE SERVICE NAME?
I NEED IT INORDER TO INSTALL COMPANION PRODUCTS?
ANY HELP
THANKS ANYWAY

This is what i recieve when i click on help regarding database service name?
"Database Service Name Specify the database service name for the database where you want to install the Oracle HTML DB database objects. The database service name is usually the same as the global database name for the database, for example, sales.us.oracle.com."
but I don't have domain name. I installed Oracle on a standalone machine for testing purposes.Do I need to be on a network using HTML DB??
MY DB NAME IS GPI, CONNECTION STRING IS
(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=GPI)))
BUT IT IS NOT WORKING?
AND WHAT IS WINDOWS DATABASE SERVICE NAME?

SQL Server Distributed Partitioning Views how to add a new node online

We are using distributed partitioning views in SQL Server 2012 Enterprise Edition for scaling out our data across more than one servers. Now we faced to question how to add a new node (server) into the scale outed db servers system without sending the servers
down, so our users will be able to use them during the process as well.
For example we have 4 servers with scaled out data. When we add the new empty server, the CHECKINGs for the partitioning columns should be reorganized. But during the process the partitioning views are not working.
The High Availability, Always On or Failover Cluster approaches seem are not resolve the problems.
So my question is how to add new node online?
KH

Thank you Erland for the reply.
Yes, it's sounds as possible solution but has some not resolvable nuance in it. Let's say we copied some data from Node5 to new added Node6. Let's assume in Node5 we had data in Table1 with partitioning column's values 100,101,102,103,104,105,106. Now
we want to copy part of the rows with partitioning column's values 103,104,105,106 from Node5.Table1 into Node6.Table1. With this Node5 will contain less data and will work more quickly (less IO, less CPU usage etc), and the rest data will be contained on
Node6. But because of Node5 is already in use, the Node5.Table1 contains CHECK CONSTRAINT = ParttionColumn should be from 100 up to 106. This is check for Node5. The Distributed Partitioning Views are already using the CHECKs to identify what server should
be used to get data from.
Now when we copied part of the Node5.Table1 rows to Node6.Table1 the views are still using the 103-106 rows from Node5.Table1 because the CHECK points there. Then we include the newest Node6.Table1 in the distributed partitioning views. OK, but we should
set some CHECK on new Node6.Table1 which will be used by views. We can't set intersecting checking like Node5 has CHECK 100-106 and Node6 has CHECK 103-106. We also can't edit Node5 check and set it 100-102 untill the data will be removed in it. But this means
that the data will not be available during the execution.
So, any ideas ?
KH

How to add a new character set encoding?

Hello,
can anybody please explain to me, how to add a new character set encoding to Mac OS Tiger?
I have two Mac laptops, a new one with Snow Leopard and an older one with Tiger, and on the old one i cannot use or enable anywhere the "Russian (DOS)" character set encoding, which i need to be able to use some old text files.
On the Snow Leopard, this encoding is present in the list of available encodings of TextWrangler, but not in TIger.
If i have understood correctly, this is not a problem of TextWrangler, and the same encodings are available systemwide.
So, the question is: how to add new encodings to Tiger (or to Mac OS in general)?
Thanks.

I think possibly that's in the Get Info window of Finder?
I don't think either that or the input menu have any effect on available encoding choices. Adding languages to system prefs/international/languages can do that, but once you have added Russian there, I don't know of any way to add an additional Russian encoding (there are quite a number of them).

How to add a new field in MM01, with say contaminent as a field?

How to add a new field in MM01, with say contaminent as a field? I process that i know is i has to go the user exit and check out the three user exits that are available for MM01 after that what i have to do please can any one help me out with the procedure to proceed?

Hai venkateshwar reddy ,
try with these user exits
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
Refer these steps also
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/screen-exit-on-mm01-mm02-mm03-322717#

How to add a new tab for the project?

Dear All Experts,
    Could you tell me how to add a new tab for the project?
    Pls refer to the screenshot as below:
Thanks!
Xinling Zhang

Hi,
    The new tab in cj20n , and the new tab can only be displayed in the highed level.Pls refer to below
    And in cj02, there is no this tab also in the wbs detailed screen,
Thanks!
Xinling

Urgent - How to add a new control instead of tabs in JTabbedPane

Hi,
Please give me an idea or a sample program for how to add a new control
in JTabbedpane instead of tabs that means overlay any Java controls or pane
in the tabpane empty place next to tabs

"Urgent" is not relevant to the question. Your question is no more important than anybody elses.
My answer in this posting show a limited solution:
http://forum.java.sun.com/thread.jspa?forumID=57&threadID=636289
Otherwise I suggest you try using a layered pane approach:
http://java.sun.com/docs/books/tutorial/uiswing/components/layeredpane.html

How to add a new database service name to 9iDS

Similar Messages

Maybe you are looking for