How to add a new mapping file

I am using SSIS (SQL Server 2008) to replicate from an ODBC source (using .NET Framework Data Provider for ODBC) to SQL Server.
I am using the Import/Export Wizard and encountering the problem described in KB 152728:
SSIS 2008 Import Export Wizard can show numbers instead of data type
http://support.microsoft.com/kb/2152728
I am trying to add a new mapping file in C:\Program Files\Microsoft SQL Server\100\DTS\MappingFiles, but it appears that the new mapping file is not being noticed by the wizard - the dialog box of the wizard (COnvert Types without Conversion Checking) still
displays
Source Information:
Cannot locate the mapping file to map the provider types to SSIS types
I tried creating a new mapping file by copying an existing one (DB2ToMSSql10.XML), renaming it ODBCToMSSql10.XML (as near as I can tell, the filename doesn't matter), and changing the SourceType line:
SourceType="System.Data.Odbc.OdbcConnection"
Is there anything else I need to do? I was expecting I might find a file that SSIS uses to figure out which mapping file to use, but I was unsuccessful, so I think it looks at the SourceType line.
The following is the full output of the dialog - perhaps I should be modifying DTS\binn\DtwTypeConversion.xml instead? But that seems messier than creating a new file in DTS\MappingFiles:
[Source Information]
Cannot locate the mapping file to map the provider types to SSIS types
[Destination Information]
Destination Location : (local)
Destination Provider : SQLNCLI10
Mapping file (to SSIS type): c:\Program Files\Microsoft SQL Server\100\DTS\MappingFiles\MSSQLToSSIS10.XML
[Conversion Table]
SSIS conversion file: c:\Program Files\Microsoft SQL Server\100\DTS\binn\DtwTypeConversion.xml

Hi, did you ever get a solution to this issue? I'm having a similar challenge trying to create a new mapping file which is not being detected by the import wizard.
Please let me know.
Gregg

Similar Messages

How to add a new Spread file to the existing one IDML?

I'd to know how add new spread in IDML file exists.
In the file designmap.xml, I put and changed somethings:
1) I put some tags; the tags are:
<idPkg:Story src="Stories/Story_u1fc.xml"/>
<idPkg:Spread src="Spreads/Spread_d467.xml"/>
2) I also added the attribute StoryList which values u1fc.
In addition to this,The StoryList attribute belongs to element Document.
3) And I changed the attribute Length of element Section, to 5, which was 3; because my new spread have 2 pages.
In IDML file final, have files in each folder, but when I open the file in InDesign IDML, it does not open .... crashes the application.
what should I do?
Thanks

Hello Diego
The SAP GLOBAL 2.0 should be downloaded from the Service marketplace. Follow the URL : [http://service.sap.com/swdc|http://service.sap.com/swdc] and search for SAP GLOBAL.
You will find the following SWCV - XI CONTENT SAPGLOBAL 2.0. If you have relevant access, you can download the same as a .tpz file and then import it into your ESR.
Hope it clarifies things.
regards
Rathish

JBuilder question on how to add a new .java file

I am new to Java and even newer to JBuilder. I am creating the GUI for our school project and my other members are creating the networking and database parts of our program seperatly. I am at the point were I need to import their .java files into my project I created in JBuilder.
Can someone tell me the steps I need to take to get those files into my project so I can start using the classes from my group they made up?
Thanks,
Scott

You can use show_alert statement and then make a check on button that is pressed from the alert.
Here is an example of show_alert built_in.
DECLARE
my_alert number;
ALERT_TXT     VARCHAR2(200) := 'Do you want to delete record?';
BEGIN
     set_alert_property('your_alert',ALERT_MESSAGE_TEXT,ALERT_TXT);
     my_alert := show_alert('your_alert');
     If my_alert = Alert_Button1 Then
         /** I choose to delete record **/
        -- here you can put your statements
       else
       -- I pressed NO button
       -- here you can put your statements
       end if;
END;Hope it helps you,
Fabrizio
If this answer is helpful or correct, please mark it. Thanks.

How to add a new character set encoding?

Hello,
can anybody please explain to me, how to add a new character set encoding to Mac OS Tiger?
I have two Mac laptops, a new one with Snow Leopard and an older one with Tiger, and on the old one i cannot use or enable anywhere the "Russian (DOS)" character set encoding, which i need to be able to use some old text files.
On the Snow Leopard, this encoding is present in the list of available encodings of TextWrangler, but not in TIger.
If i have understood correctly, this is not a problem of TextWrangler, and the same encodings are available systemwide.
So, the question is: how to add new encodings to Tiger (or to Mac OS in general)?
Thanks.

I think possibly that's in the Get Info window of Finder?
I don't think either that or the input menu have any effect on available encoding choices. Adding languages to system prefs/international/languages can do that, but once you have added Russian there, I don't know of any way to add an additional Russian encoding (there are quite a number of them).

How to add a new char in Update rule

Hi Gurus:
I copied update rules from an old cube. This new cube is a copy of old cube - almost.
One of the char is missing in the new cube when compared to old cube. There is a small update routine for that char which I need to introduce to new cube.
My problem is, I'm not able to figure out how to add the new char in the update rule & start the mapping process..
Thanks & Regards

Dear Bhanu: This is what happened.
When I copied - it defaulted this char with what present in comm structure. Basically the old cube has a routine for this char...
And the position of this char in the update rule for chars..got realigned.
I'm sorry - I should have check it properly.
Thanks a LOT for your time & input...I will assign the points
Best Regards

I just started using fire fox and I cant figure out how to add a new folder to my bookmarks. Can anybody explain how in detail (I'm bad with computers so I need real detail) Please and thank you. :)

I just started using fire fox and I can't figure out how to add a new folder to my bookmarks.
Can anybody explain how in detail (I'm bad with computers so I need real detail)
Please and thank you. :)

If you use extensions (Tools > Add-ons > Extensions) like Adblock Plus or NoScript or Flash Block that can block content then make sure that such extensions aren't blocking content.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
You can use one of these to start Firefox in Safe mode:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
*Help > Restart with Add-ons Disabled
If it works in Firefox Safe-mode then disable all extensions (Tools > Add-ons > Extensions) and then try to find which is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How to add other 2 control files at ASM in linux RAC

Hi Experts,
I am new for RAC .
the vendor build a RAC for us. I found there are only one control file in system.
we use oracle 10.2.0.4 at ASM with RAC in redhat linux 5.
how to add 2 additional control file to ASM for RAC ?
Please provide a procedur in detail.
Thanks
Jim

Hi damorgan & Friends,
I could not find some infomration to add control into ASM . I can do this job( see below procedure) in no ASM .
My question, our database locates at ASM and control file with a system auto-number ( fully qualified filename ) as
+DATA1/SALE/controlfile/current.256.690290159
How do I physical copy and rename other 2 contril file in directory and modify location in pfile?
I saw some paper to use request as an alias (such as +dgroup2/control/ctl.f). i can not image to copy/rename control.
Please help me!!
Thanks
Jim
========added control file for no ASM database and works=====================
1)
SQL> create pfile from spfile;
File created.
2)
SQL> show parameter control_file
NAME TYPE VALUE
control_file_record_keep_time integer 7
control_files string C:\ORADATA\ORCL\CONTROL01.CTL
3)
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
4) modify pfile add additional control file2/3 as
control_files='C:\Oradata\ORCL\control01.ctl','C:\Oradata\ORCL\control02.ctl','C:\Oradata\ORCL\control03.ctl'
and physical copy control01.ctl and raname as control02.ctl,control03.ctl
5)
SQL> startup pfile='C:\oracle\product\10.2.0\db_2\database\initORCL.ora';
ORACLE instance started.
Total System Global Area 167772160 bytes
Fixed Size 1247900 bytes
Variable Size 62915940 bytes
Database Buffers 100663296 bytes
Redo Buffers 2945024 bytes
Database mounted.
Database opened.er database mount;
6)
SQL> Create spfile from pfile='C:\oracle\product\10.2.0\db_2\database\initORCL.ora';
File created.
7) check control file info under pfile environment
SQL> show parameter control_file
NAME TYPE VALUE
control_file_record_keep_time integer 7
control_files string C:\ORADATA\ORCL\CONTROL01.CTL,
C:\ORADATA\ORCL\CONTROL02.CTL
, C:\ORADATA\ORCL\CONTROL03.CT
L
8)SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
9) startup as spfile environment.
SQL> startup
ORACLE instance started.
Total System Global Area 167772160 bytes
Fixed Size 1247900 bytes
Variable Size 62915940 bytes
Database Buffers 100663296 bytes
Redo Buffers 2945024 bytes
Database mounted.
Database opened.
10) check control info for spfile environment
SQL> show parameter spfile
NAME TYPE VALUE
spfile string C:\ORACLE\PRODUCT\10.2.0\DB_2\
DATABASE\SPFILEORCL.ORA
SQL> show parameter control_file
NAME TYPE VALUE
control_file_record_keep_time integer 7
control_files string C:\ORADATA\ORCL\CONTROL01.CTL,
C:\ORADATA\ORCL\CONTROL02.CTL
, C:\ORADATA\ORCL\CONTROL03.CT
L

How is add/insert jpeg/gif files on wiki (code gallery)

Hi;
I prepared new wiki-code gallery page. I must insert/add jpeg/gif files on my page. But I dont know How is add/insert jpeg/gif files on wiki (code gallery).
Please help me.
Thanks.
http://wiki.sdn.sap.com/wiki/display/Snippets/NewTimeDomainandConversionRoutineforTotalTime

Hi;
Mr Moshe Naveh helped me. He sended me new template page.
I again prepared my wiki with new template. ( http://wiki.sdn.sap.com/wiki/pages/createpage-entervariables.action?spaceKey=stage&templateId=113147905 ) I added jpeg files on new wiki page.
Then He moved my new page.
Thanks him.
Best regards.

How to add entire new row at the top of table in pdf report from c# windows forms using iTextSharp

Hi for past 3 days i was thinking and breaking my head on how to add entire new at top table created in pdf report from c# windows forms with iTextSharp.
First: I was able to create/export sql server data in form of table in pdf report from c# windows forms. Given below is the code in c#.
using System;
using System.Collections.Generic;
using System.Configuration;
using System.Text;
using System.Data;
using System.IO;
using System.Data.SqlClient;
using System.Windows.Forms;
using iTextSharp.text;
using iTextSharp.text.pdf;
namespace DRRS_CSharp
public partial class frmPDFTechnician : Form
public frmPDFTechnician()
InitializeComponent();
private void btnExport_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
PdfPTable inner = new PdfPTable(1);
inner.WidthPercentage = 115;
PdfPCell celt=new PdfPCell(new Phrase(new Paragraph("Institute/Hospital:AIIMS,NEW DELHI",FontFactory.GetFont("Arial",14,iTextSharp.text.Font.BOLD,BaseColor.BLACK))));
inner.AddCell(celt);
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(inner);
doc.Add(table);
doc.Close();
The code executes well with no problem and get all datas from tables into table in PDF report from c# windows forms.
But here is my problem how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
As the problem i am facing is my title or Header(DCS Clinical Report-Technician wise) is at top of my image named:logo5.png and not coming to it's center position of my image.
Second the problem i am facing is how to add new entire row to top of existing table in pdf report from c# windows form using iTextSharp?.
given in below is the row and it's data . So how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
as you can see how i create my columns in table in pdf report and populate it with sql server data. Given the code below:
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
So my question is how to make my column headers in bold?
So these are my questions.
1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?
I know that i have to do some modifications to my code but i dont know how to do it. Can anyone help me please.
Any help or guidance in solving this problem would be greatly appreciated.
vishal

Hi,
>>1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?<<
I’m sorry for the issue that you are hitting now.
This itextsharp is third party control, for this issue, I recommended to consult the control provider directly, I think they can give more precise troubleshooting.
http://sourceforge.net/projects/itextsharp/
Thanks for your understanding.
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SQL Server Distributed Partitioning Views how to add a new node online

We are using distributed partitioning views in SQL Server 2012 Enterprise Edition for scaling out our data across more than one servers. Now we faced to question how to add a new node (server) into the scale outed db servers system without sending the servers
down, so our users will be able to use them during the process as well.
For example we have 4 servers with scaled out data. When we add the new empty server, the CHECKINGs for the partitioning columns should be reorganized. But during the process the partitioning views are not working.
The High Availability, Always On or Failover Cluster approaches seem are not resolve the problems.
So my question is how to add new node online?
KH

Thank you Erland for the reply.
Yes, it's sounds as possible solution but has some not resolvable nuance in it. Let's say we copied some data from Node5 to new added Node6. Let's assume in Node5 we had data in Table1 with partitioning column's values 100,101,102,103,104,105,106. Now
we want to copy part of the rows with partitioning column's values 103,104,105,106 from Node5.Table1 into Node6.Table1. With this Node5 will contain less data and will work more quickly (less IO, less CPU usage etc), and the rest data will be contained on
Node6. But because of Node5 is already in use, the Node5.Table1 contains CHECK CONSTRAINT = ParttionColumn should be from 100 up to 106. This is check for Node5. The Distributed Partitioning Views are already using the CHECKs to identify what server should
be used to get data from.
Now when we copied part of the Node5.Table1 rows to Node6.Table1 the views are still using the 103-106 rows from Node5.Table1 because the CHECK points there. Then we include the newest Node6.Table1 in the distributed partitioning views. OK, but we should
set some CHECK on new Node6.Table1 which will be used by views. We can't set intersecting checking like Node5 has CHECK 100-106 and Node6 has CHECK 103-106. We also can't edit Node5 check and set it 100-102 untill the data will be removed in it. But this means
that the data will not be available during the execution.
So, any ideas ?
KH

How to add a new column (Project Number) in the action items table under NPD Module?

There are two projects with same name and created by same person in NPD.
So when it is displayed in "Action Items" table, It looks similar.
To avoid this, I need one more column (Project Number) to be added in the "Action Items" table and " Strategic briefs and projects" table.
So, How to add a new column (Project Number) in the "Action Items" table and " Strategic briefs and projects" table under NPD Module?
Please do the needful.

There is no out of the box configuration available to add columns to NPD action items. As always we welcome enhancement requests.
Thanks
Kelly

How to add a new field in MM01, with say contaminent as a field?

How to add a new field in MM01, with say contaminent as a field? I process that i know is i has to go the user exit and check out the three user exits that are available for MM01 after that what i have to do please can any one help me out with the procedure to proceed?

Hai venkateshwar reddy ,
try with these user exits
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
Refer these steps also
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/screen-exit-on-mm01-mm02-mm03-322717#

How to add a new tab for the project?

Dear All Experts,
    Could you tell me how to add a new tab for the project?
    Pls refer to the screenshot as below:
Thanks!
Xinling Zhang

Hi,
    The new tab in cj20n , and the new tab can only be displayed in the highed level.Pls refer to below
    And in cj02, there is no this tab also in the wbs detailed screen,
Thanks!
Xinling

How can I generate a map file with LabVIEW?

We wish to use a product which inserts code into our executable to prevent tampering with it by crackers. The program, however, takes the executable file, as well as the map file (which is commonly generated by c++ compilers) and uses the map file to determine where in the exe the critical routines that need protection are at. I can not, however, determine how to create such a map file for a LabVIEW generated executable. Is there a special build option I need to invoke?

Yes, I'm familar with NI's licensing technology, having talked with someone (you, Dennis, I believe) about it before. The problem we have is our software is sold to factories in China where there are no internet connections. We have a physical key 'dongle' which must be present in order for the executable to be willing to run. However, it appears that people are taking the executable which LabVIEW creates and they are editing it, probably by using a a debugger and tracing to the the code which checks for the dongles presence and bypassing it. To my knoweledge, NI's products don't do anything to prevent this, right?
We found a company which sells a product that encryptes, checksums, etc... an executable file, but it needs to know the layout of functions in the exe in order to determine which areas to focus the obfuscation on. They were sort of matter of fact when they said it needs the exe and the map file, as if they expected any language which produced an exe could produce a map file.

Urgent - How to add a new control instead of tabs in JTabbedPane

Hi,
Please give me an idea or a sample program for how to add a new control
in JTabbedpane instead of tabs that means overlay any Java controls or pane
in the tabpane empty place next to tabs

"Urgent" is not relevant to the question. Your question is no more important than anybody elses.
My answer in this posting show a limited solution:
http://forum.java.sun.com/thread.jspa?forumID=57&threadID=636289
Otherwise I suggest you try using a layered pane approach:
http://java.sun.com/docs/books/tutorial/uiswing/components/layeredpane.html

How to add a new mapping file

Similar Messages

Maybe you are looking for