How to add a new network interface adapter?

Hello,
I followed this tutorial (http://www.oracle.com/technology/obe/ovm/ovmel5pvmdb11gr1/ovmel5pvmdb11gr1.htm) to set up a paravirtualized Oracle Enterprise Linux Version 5 VM on Oracle VM Server. It works fine, however I wish to add another network interface adapter (or NIC) to it, however when I try to import into Oracle VM Manager I get the following error:
"OVM-5004 Invalid virtual machine config file. -"
I don't know where the vm config file is so I can't fix that (I did a search for vm.cfg but couldn't find it). I figured since I could access the machine OK I wouldn't worry about importing it into VM Manager, so my question is, is there a way to set up the Network Interface Adapter through the command line on the VM Server (similar to how it was setup)? Or should I try and fix the "invalid virtual machine config file" error so I can import it into VM Manager and then add the extra Network Interface Adapter?
Thanks in advance,
Michael.

user10862036 wrote:
I don't know where the vm config file is so I can't fix that (I did a search for vm.cfg but couldn't find it). The vm.cfg file would be found in /OVS/running_pool/<vm_name>/ -- the default vm.cfg that ships with the template should successfully import into Oracle VM Manager. Once you have the image imported, you can use Oracle VM Manager to add an additional NIC to the VM.

Similar Messages

Thunderbolt to Firewire Adapter & New Network Interface Message

I am using the new Thunderbolt to Firewire Adapter. Why is it that every time I use it, I get the following message:
"A new network interface has been detected. The Thunderbolt FireWire Slot 2 network interface has not been set up. To set up this interface, use network preferences."
All I want to do is mount external hard drives that don't have Thunderbolt ports to my iMac, via Thunderbolt because I am using the iMac's single Firewire port for something else. The drives do successfully mount, but why do I keep getting this message whenever I connect them again?

I have no doubt what you say to do would get rid of the message for me. However, both myself and an Apple Store employee think it is odd that the message comes up in the first place. We're both curious about it, and he's going to look into it.
We tested it on a computer at the store, and found that it happens on Lion too.

I keep getting a "new network interface has been detected. Hoping to stop getting this automatic message I configured it, or thought I did. I'm still getting the message. How do I stop it?

I keep getting a "new network interface has been detected. Hoping to stop getting this automatic message I configured it, or thought I did. I'm still getting the message. How do I stop it?

I thought the same too, looks like its not just me having this issue, hope Apple do something soon. Thanks for your help

UML290 & Mac: A new network interface has been detected

I have a MacBook Pro running Snow Leopard, and I just purchased a Pantech UML290 4G modem, live in an area with good 4G coverage, and I get a good 4G signal. I am running VZAccess Manager version 7.2.5, and in general it connects to the 4G network fine and stays connected. Every time I connect the modem to my laptop, Mac OS generates a "A new network interface has been detected" pop up with the option to Cancel or go to Network Preferences. Canceling makes it go away.
I also see 4 devices under System Preferences > Network:
1. Verizon UM290 (which shows connected, not sure why it's missing the L in UML)
2. Pantech UML290 USB Modem
3. Pantech UML290 USB Serial
4. Pantech UML290 USB CM
Does anyone know how to get rid of the annoying message every time I connect the modem? Thanks.

I have the same set up. Get the same messages almost everytime I start up the UML290. Not sure why I occasionally don't get it. Many others on the forum have reported this as well. For now, we live with it.
Sandy

How to choose the good Network Interface on a server ?

Hi all,
On server you have generally more than one ip address so ...How to choose the good Network Interface on a server for the NoSQL Node ?
Thank you for all
C.Pruvost.

Hi Charles I only consider storage nodes and their replicated nodes.
Actually I show an error in the logs saying that one of my storage node use a loopback address. On my laptop I have a network interface and a loopback address (disabled)...when starting sn1 I show that the port 5000 is only linked to the ip address 0.0.0.0 so it is not the good ip address..although i use for configuring :
java -jar ..\lib\kvstore-2.0.23.jar makebootconfig -root root1 -port 5000 -admin 5001 -host ipaddress_of_my_laptop -harange 5010,5020
and after
java -jar ..\lib\kvstore-2.0.23.jar start -root root1
If you have a sample tutorial that explains how simulate on the same laptop an Oracle NoSQL architecture running on 3 disctinct servers please give us this information.
Thank you for all.
Christophe.
PS : error message
Failures: Task 1 ERROR at 2013-01-15 07:23:19 UTC: DeploySN sn3(pruv
ost-pc:5200): 1/DeploySN failed.: Register: Cannot mix loopback and non-loopback
addresses in the same store. The store value is not configured to use loopback
addresses but storage node pruvost-pc:5200 is a loopback address. (11.2.2.0.23)
: Register: Cannot mix loopback and non-loopback addresses in the same store. T
he store value is not configured to use loopback addresses but storage node pruv
ost-pc:5200 is a loopback address. (11.2.2.0.23) java.lang.IllegalStateException
: Register: Cannot mix loopback and non-loopback addresses in the same store. T
he store value is not configured to use loopback addresses but storage node pruv
ost-pc:5200 is a loopback address.
at oracle.kv.impl.sna.StorageNodeAgent.register(StorageNodeAgent.java:15
48)
at oracle.kv.impl.sna.StorageNodeAgentImpl$2.execute(StorageNodeAgentImp
l.java:194)
at oracle.kv.impl.sna.StorageNodeAgentImpl$2.execute(StorageNodeAgentImp
l.java:188)
at oracle.kv.impl.fault.ProcessFaultHandler.execute(ProcessFaultHandler.
java:90)
at oracle.kv.impl.sna.StorageNodeAgentImpl.register(StorageNodeAgentImpl
.java:186)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
Edited by: chpruvos on Jan 14, 2013 11:24 PM
And my ipconfig
Windows IP Configuration
Wireless LAN adapter Wireless Network Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Ethernet adapter Local Area Connection 3:
Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : 172.20.10.2
Subnet Mask . . . . . . . . . . . : 255.255.255.240
Default Gateway . . . . . . . . . : 172.20.10.1
Ethernet adapter Local Area Connection* 24:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Wireless LAN adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
and
C:\Users\cpruvost>ping pruvost-pc
Pinging PRUVOST-PC.fr.oracle.com [172.20.10.2] with 32 bytes of data:
Reply from 172.20.10.2: bytes=32 time<1ms TTL=128
Reply from 172.20.10.2: bytes=32 time<1ms TTL=128
Reply from 172.20.10.2: bytes=32 time<1ms TTL=128
Reply from 172.20.10.2: bytes=32 time<1ms TTL=128
Ping statistics for 172.20.10.2:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
Edited by: chpruvos on Jan 14, 2013 11:25 PM

How to add entire new row at the top of table in pdf report from c# windows forms using iTextSharp

Hi for past 3 days i was thinking and breaking my head on how to add entire new at top table created in pdf report from c# windows forms with iTextSharp.
First: I was able to create/export sql server data in form of table in pdf report from c# windows forms. Given below is the code in c#.
using System;
using System.Collections.Generic;
using System.Configuration;
using System.Text;
using System.Data;
using System.IO;
using System.Data.SqlClient;
using System.Windows.Forms;
using iTextSharp.text;
using iTextSharp.text.pdf;
namespace DRRS_CSharp
public partial class frmPDFTechnician : Form
public frmPDFTechnician()
InitializeComponent();
private void btnExport_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
PdfPTable inner = new PdfPTable(1);
inner.WidthPercentage = 115;
PdfPCell celt=new PdfPCell(new Phrase(new Paragraph("Institute/Hospital:AIIMS,NEW DELHI",FontFactory.GetFont("Arial",14,iTextSharp.text.Font.BOLD,BaseColor.BLACK))));
inner.AddCell(celt);
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(inner);
doc.Add(table);
doc.Close();
The code executes well with no problem and get all datas from tables into table in PDF report from c# windows forms.
But here is my problem how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
As the problem i am facing is my title or Header(DCS Clinical Report-Technician wise) is at top of my image named:logo5.png and not coming to it's center position of my image.
Second the problem i am facing is how to add new entire row to top of existing table in pdf report from c# windows form using iTextSharp?.
given in below is the row and it's data . So how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
as you can see how i create my columns in table in pdf report and populate it with sql server data. Given the code below:
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
So my question is how to make my column headers in bold?
So these are my questions.
1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?
I know that i have to do some modifications to my code but i dont know how to do it. Can anyone help me please.
Any help or guidance in solving this problem would be greatly appreciated.
vishal

Hi,
>>1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?<<
I’m sorry for the issue that you are hitting now.
This itextsharp is third party control, for this issue, I recommended to consult the control provider directly, I think they can give more precise troubleshooting.
http://sourceforge.net/projects/itextsharp/
Thanks for your understanding.
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SQL Server Distributed Partitioning Views how to add a new node online

We are using distributed partitioning views in SQL Server 2012 Enterprise Edition for scaling out our data across more than one servers. Now we faced to question how to add a new node (server) into the scale outed db servers system without sending the servers
down, so our users will be able to use them during the process as well.
For example we have 4 servers with scaled out data. When we add the new empty server, the CHECKINGs for the partitioning columns should be reorganized. But during the process the partitioning views are not working.
The High Availability, Always On or Failover Cluster approaches seem are not resolve the problems.
So my question is how to add new node online?
KH

Thank you Erland for the reply.
Yes, it's sounds as possible solution but has some not resolvable nuance in it. Let's say we copied some data from Node5 to new added Node6. Let's assume in Node5 we had data in Table1 with partitioning column's values 100,101,102,103,104,105,106. Now
we want to copy part of the rows with partitioning column's values 103,104,105,106 from Node5.Table1 into Node6.Table1. With this Node5 will contain less data and will work more quickly (less IO, less CPU usage etc), and the rest data will be contained on
Node6. But because of Node5 is already in use, the Node5.Table1 contains CHECK CONSTRAINT = ParttionColumn should be from 100 up to 106. This is check for Node5. The Distributed Partitioning Views are already using the CHECKs to identify what server should
be used to get data from.
Now when we copied part of the Node5.Table1 rows to Node6.Table1 the views are still using the 103-106 rows from Node5.Table1 because the CHECK points there. Then we include the newest Node6.Table1 in the distributed partitioning views. OK, but we should
set some CHECK on new Node6.Table1 which will be used by views. We can't set intersecting checking like Node5 has CHECK 100-106 and Node6 has CHECK 103-106. We also can't edit Node5 check and set it 100-102 untill the data will be removed in it. But this means
that the data will not be available during the execution.
So, any ideas ?
KH

How to add a new character set encoding?

Hello,
can anybody please explain to me, how to add a new character set encoding to Mac OS Tiger?
I have two Mac laptops, a new one with Snow Leopard and an older one with Tiger, and on the old one i cannot use or enable anywhere the "Russian (DOS)" character set encoding, which i need to be able to use some old text files.
On the Snow Leopard, this encoding is present in the list of available encodings of TextWrangler, but not in TIger.
If i have understood correctly, this is not a problem of TextWrangler, and the same encodings are available systemwide.
So, the question is: how to add new encodings to Tiger (or to Mac OS in general)?
Thanks.

I think possibly that's in the Get Info window of Finder?
I don't think either that or the input menu have any effect on available encoding choices. Adding languages to system prefs/international/languages can do that, but once you have added Russian there, I don't know of any way to add an additional Russian encoding (there are quite a number of them).

How to add a new column (Project Number) in the action items table under NPD Module?

There are two projects with same name and created by same person in NPD.
So when it is displayed in "Action Items" table, It looks similar.
To avoid this, I need one more column (Project Number) to be added in the "Action Items" table and " Strategic briefs and projects" table.
So, How to add a new column (Project Number) in the "Action Items" table and " Strategic briefs and projects" table under NPD Module?
Please do the needful.

There is no out of the box configuration available to add columns to NPD action items. As always we welcome enhancement requests.
Thanks
Kelly

How to add a new field in MM01, with say contaminent as a field?

How to add a new field in MM01, with say contaminent as a field? I process that i know is i has to go the user exit and check out the three user exits that are available for MM01 after that what i have to do please can any one help me out with the procedure to proceed?

Hai venkateshwar reddy ,
try with these user exits
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
Refer these steps also
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/screen-exit-on-mm01-mm02-mm03-322717#

How to add a new tab for the project?

Dear All Experts,
    Could you tell me how to add a new tab for the project?
    Pls refer to the screenshot as below:
Thanks!
Xinling Zhang

Hi,
    The new tab in cj20n , and the new tab can only be displayed in the highed level.Pls refer to below
    And in cj02, there is no this tab also in the wbs detailed screen,
Thanks!
Xinling

Urgent - How to add a new control instead of tabs in JTabbedPane

Hi,
Please give me an idea or a sample program for how to add a new control
in JTabbedpane instead of tabs that means overlay any Java controls or pane
in the tabpane empty place next to tabs

"Urgent" is not relevant to the question. Your question is no more important than anybody elses.
My answer in this posting show a limited solution:
http://forum.java.sun.com/thread.jspa?forumID=57&threadID=636289
Otherwise I suggest you try using a layered pane approach:
http://java.sun.com/docs/books/tutorial/uiswing/components/layeredpane.html

How to add a new data element for existing table filed(Primary key field)

Hi Experts,
How to add a new data element for existing table field(Primary key field)
For this filed ther is no foreign key relation ships and even check table.
while activating table it is giving message like below.
can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)
Primary key change not permitted for value table /TC/VENDOR
Check on table /TC/VENDOR resulted in errors
Thanks
Ravi

Hi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob

How to add a new element to a model node in the view controller?

View Context
    myNode
         attri1
         attri2
myNode is a web service model node. How to add a new element to this node?
Regards,
Hui
Edited by: Hui Wang on Feb 15, 2008 12:05 PM

Sudhir Gorantla wrote:>
> Hi,
>
> myNode
> attri1
> attri2
>
> IMyNodeElement ele=wdContext.myNode().createMyNodeElement();
>
> ele.setAttri1("");
> ele.setAttri2("");
>
> wdContext.nodeMyNode().addElement(ele);
>
> Regards,
> Sudhir
Hi we need a model as an input parameter when creating a element for a model node. How to get the instance of the model?
Regards,
Hui

How to add a new url link in a view of an existing webdynpro component?

How to add a new url link in a view of an existing webdynpro component?

hi ,
refer SAP online hep :
Implementing Enhancements in a View
http://help.sap.com/erp2005_ehp_04/helpdata/EN/46/233f2189f74f08e10000000a114a6b/frameset.htm
To enhance the layout of the view, you can create new UI elements. This procedure is no different u2013 from a technical viewpoint u2013 from creating UI elements in components themselves. All UI elements created within the enhancement implementation can then be processed as usual.
Enhancements means inserting user developments into SAP development objects at predefined positions.
The Enhancement Framework enables you to add functionality to standard SAP software without actually changing the original repository objects, and to organize these enhancements as effectively as possible.
refernce :
have a look at this article
How to Create Enhancement Implementation in Web Dynpro ABAP
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/700317da-bd79-2c10-368e-8f18bf5d8b81&overridelayout=true
as pointed correctly by Saurav in earlier thread
regards,
amit

How to add a new network interface adapter?

Similar Messages

Maybe you are looking for