How to add a new printer and laptop to my home network

Greetings, Need tech help. I have 2 issues going on.
First I am trying to add a 2nd Printer to my home network. I was given an HP 4050N printer. I want to add it to my home network. My main printer is an HP Photosmart 8450. It is attached to my desktop thro a Belkin USB 4 port switch and then to my Desktop PC via a USB port. THe HP 4050N has both parrallel and serial connectors...no USB ports. WHat is the recommended method to hook up. I also have an actiontec wireless router. Initially I had 2 separate desktop units talking to my main printer, but noe the second desktop has it's own printer.
Second, I recently acquired an HP Elite Book 2540P laptop. I got it to power make my SOlidworks and Autocad software portable. I would like to add this to my home network but dont know if wireless of serial hookup is the best way to go.
I hope this makes sense. I am open to reconfiguring everything if it makes sense. My internet and TV are driven through the Action-tec router.
I would appreciate some guidance.

@foleyba4
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Similar Messages

How to add a new printer into printer list?

Dear all,
May I know how to add new printer into my printer list in SAP system? My company SAP is SAP 4.0B. Can any one please teach me how to add printer step-by-step?
Thanks alot!!
PC

Solved

How to add a new printer

Firefox has several printer options, but not the one I need to use at home. I just need to know how to add a printer to the drop-down list. Thanks!

Never mind, I figured it out. Thanks anyway!

How to add a new print format by SPAD?

could anyone give some advice on this? tks very much

Hi,
go to transaction SPAD,
in Devices / Servers tab press Output devices button
Double click on the device type of your printer
Press button Formats
and here you get a list of all formats for your printer
check if here there is DINA3
if it already exists then check you´ll have the right format in your report or sapscript or smartform.
Regards,
Ram
Pls reward points if helpful

Add Modify, Refresh, Print and Download link

Hi..
How to add Modify, Refresh, Print and Download link into my dashboard report...

I got a answer..
Steps:
Select Page Options -> Edit Dashboard ->(Select the report) -> Properties -> Report Links
And Select the options which we want.

When I try to print sth I can´t choose my printer. Adobe Reader only shows a printer I used years ago.I aleady deleted and reinstalled the Reader and deleted all other printers from the computer.How can I add a new printer to Adobe Reader?Thanks for help!

When I try to print sth I can´t choose my printer. Adobe Reader only shows a printer I used years ago.I aleady deleted and reinstalled the Reader and deleted all other printers from the computer.How can I add a new printer to Adobe Reader?Thanks for help!

Hi,
I would suggest you to uninstall Adobe Reader using the cleaner tool and then re-install the latest version.
Adobe Cleaner Tool:- Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs.
Latest version of Adobe Reader:- http://get.adobe.com/reader/
If you still experience the same issue, please share the following information:-
- Screenshot of Adobe Reader showing printer options
- Screenshot of Microsoft Word showing printer options
- Screenshot of control panel- Control Panel\All Control Panel Items\Devices and Printers
Regards,
Nakul

How to add a new custom paper size? I am using a HP Deskjet 1000 J 110a printer.

How to add a new custom paper size? I am using a HP Deskjet 1000 J 110a printer. I am using Windows XP home edition. The Custom option itself is not appearing in the process of selecting paper sizes in Printing preferences. I have installed this printer just today, but I bought it eight months back in Dubai. Could there be chance that since I purchased it in Dubai and I am using it in India, the software's not functioning properly.
Can you please help me with this problem immediately? Reply soon...

Hi RajeshPujara,
Please refer the link below to know the paper size supported by this printer.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02231304&tmp_task=prodinfoCategory&cc=us&dlc=en...
May I know the size of paper you are trying to print.
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Standard TCP/IP Port missing from drop down "Create a new port and add a new printer"

Somehow someone was on my print server and made some changes or added some software. I found that the "HP Universal Print Monitor" was my only other choice besides Local Port when I went to add a new printer on my 2012 print server
"Standard TCP/IP Port" was gone. I ended removing this from the registry (see below) as I could not find any other way to uninstall it. After this was removed I did reboot and I can still add a normal Standard TCP/IP Port under print
management in the ports section but this option is gone in the drop down when you add a printer under printers.
Any idea how to get this option back into the drop down list?
HKLM\SYSTEM\CURRENTCONTROLSET\CONTROL\Print\MONITORS\HP Universal Print Monitor

I followed these instructions and everything is correct and still do not have the tcp/ip option
Restore missing Standard TCP/IP Port type for Printer
Filed under:
Tips n Tricks — Rahul Patel @ 5:01 pm
If the TCP/IP port option is missing you need to re-add it.
First, make sure that the following files are in C:\Windows\System32\:
tcpmib.dll
tcpmon.dll
tcpmon.ini
tcpmonui.dll
If they are missing, you will need to copy them there from either the i386 directory (if you have one) or from the original install CD.
Then, copy the following lines to NOTEPAD and save the file to your desktop as “printer.reg”
Windows Registry Editor Version 5.00
      [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\Standard TCP/IP Port]
      “Driver”=”tcpmon.dll”
      [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\Standard TCP/IP Port\Ports]
“LprAckTimeout”=dword:000000b4
“StatusUpdateInterval”=dword:0000000a
“StatusUpdateEnabled”=dword:00000001
Once it’s saved to your desktop, double-click printer.reg and say “OK” to the warning that you will be adding the keys to your registry.
Reboot the Server and the TCP/IP port option should be back.

How can i add a new user and change user'password with javamail?

how can i add a new user and change user'password from a mailserver with javamail?
email:[email protected]

Well user creation and updation is a system property..U need to go through that part...as it depends on the system you are hosting pout your application...
if it is linux...u have to use some shell programming\
bye for now let me know if this guides you or if you need some more stuff.
bye

How to Add a new Currency in HFM Data form and grid (Rates)

Hi Gurus,
Am very new to this forum.
Can someone explain me how to add a new currency to the existing data for or grid in the Workspace.
Regards,
Vinod

Hi Sandeep,
To add a new currency in Metadata, just add in Currencies dimension, and to add in Data form-just send the script what you are using as of now for rest of the currencies, or follow the same steps as specified above. or just add the script A#CLORATE.w#Periodic.C2#XYZ in rows of your data form (where XYZ- is the new currency).
To add a new location in FDM login to FDM web client- click on Metadata--> locations and select the Controls review location where you want to add the data load location, right click and add the new location.

I bought an old iPod touch It is 6.1.6, i would like to add a new icloud account but it can't let me. this iPod touch belonged to another person and i don't know where is he can you tell me please how to add a new icloud account??

I bought an old iPod touch It is 6.1.6, i would like to add a new icloud account but it can't let me. this iPod touch belonged to another person and i don't know where is he can you tell me please how to add a new icloud account??

The 4G/iOS 6 does not have an Activation Lock. That started with iOS 7.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software

I just started using fire fox and I cant figure out how to add a new folder to my bookmarks. Can anybody explain how in detail (I'm bad with computers so I need real detail) Please and thank you. :)

I just started using fire fox and I can't figure out how to add a new folder to my bookmarks.
Can anybody explain how in detail (I'm bad with computers so I need real detail)
Please and thank you. :)

If you use extensions (Tools > Add-ons > Extensions) like Adblock Plus or NoScript or Flash Block that can block content then make sure that such extensions aren't blocking content.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
You can use one of these to start Firefox in Safe mode:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
*Help > Restart with Add-ons Disabled
If it works in Firefox Safe-mode then disable all extensions (Tools > Add-ons > Extensions) and then try to find which is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How to add a new character set encoding?

Hello,
can anybody please explain to me, how to add a new character set encoding to Mac OS Tiger?
I have two Mac laptops, a new one with Snow Leopard and an older one with Tiger, and on the old one i cannot use or enable anywhere the "Russian (DOS)" character set encoding, which i need to be able to use some old text files.
On the Snow Leopard, this encoding is present in the list of available encodings of TextWrangler, but not in TIger.
If i have understood correctly, this is not a problem of TextWrangler, and the same encodings are available systemwide.
So, the question is: how to add new encodings to Tiger (or to Mac OS in general)?
Thanks.

I think possibly that's in the Get Info window of Finder?
I don't think either that or the input menu have any effect on available encoding choices. Adding languages to system prefs/international/languages can do that, but once you have added Russian there, I don't know of any way to add an additional Russian encoding (there are quite a number of them).

Add a new printer to my MAC

Hello Macs,
I need to add a new printer so that I can use it on my MB. It is an HP 5250 all in one. It is hooked up to a PC running Windows XP. The printer is on my home network, and is setup to be shared.
However, my MB does not "see" it in the printer preference plane. I'm thinking maybe I don't have the driver installed on my MB. The printer is at my Parents house, so I'd like to print stuff at their place. But we don't have any of the discs for setup.
I have an HP 930 setup just fine at my house. I have no problems with it, and it too, is ran through a PC running Win XP.
So why can't I use the printer at Mom's house????
How do I add their HP 5250 to my printer list????
Thanks everyone in advance, for your help, CHRIS

Hello Barete,
It sounds like you would like to add a Wi-Fi printer to your MacBook. I recommend following the steps in the article below:
OS X: Connecting a Wi-Fi printer to your Wi-Fi network
http://support.apple.com/kb/ht3500
Thank you for using Apple Support Communities.
Best,
Sheila M.

How to create a new variant and a job sheduled to use it for the ......

How to create a new variant and a job sheduled to use it for the exisisting programs

Hi
1. The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
standardized format. The list data is displayed as a table on the screen.
The ALV Grid Control offers a range of interactive standard list functions that users need
frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
export list (in different formats), and so on. These functions are implemented in the
proxy object class. You as the programmer have the possibility to turn off functions not
needed. In most cases the implementations of the standard functions provided by the
control are sufficient. However, if required, you can adjust these implementations to
meet application-specific needs.
You can add self-defined functions to the toolbar, if necessary.
The ALV Grid Control allows users to adjust the layout of lists to meet their individual
requirements (for example, they can swap columns, hide columns, set filters for the
data to be displayed, calculate totals, and so on). The settings (list customizing) made
by a specific user are called a display variant. Display variants can be saved on a userspecific
or on a global basis. If such display variants exist for a list, they can be offered
to the user for selection. If a display variant is set as the default variant, the associated
list is always displayed based on the settings of this variant.
2. REUSE_ALV_LIST_DISPLAY
REUSE_ALV_GRID_DISPLAY
REUSE_ALV_FIELDCATALOG_MERGE
REUSE_ALV_COMMENTARY_WRITE
3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
7.fieldcat-fieldname
fieldcat-ref_fieldname
fieldcat-tabname
fieldcat-seltext_m
5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
The commonly used ALV functions used for this purpose are;
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
But either no.7 or No.8 is there in the Program.

How you call this function in your report?
After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
Then use follwing function module.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'Prog.name'
I_STRUCTURE_NAME = 'I_ITAB'
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_ITAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
ENDFORM. " GET_FINAL_DATA
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70. Each of the
activities 01, 02 and 70 controls the availability of particular
functions (in the menu and the toolbar) of the ALV line item list:
a) 01: "Settings -> Display variant -> Save..."
b) 02: "Settings -> Display variant -> Current..." and
"Settings -> Display variant -> Current header rows "
c) 70: "Settings -> Display variant -> Administration..."
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: The user can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
Now if you want to permit a user to change the column selection and
the headers as well as to save the layout thus created, for example,
but if you do not want to permit the user to administrate the
layouts, you grant him or her the authorization for activities 01
and 02.
Check this link it will be mosty usefull for u
http://www.sap-img.com/fu017.htm
Reward all helpfull answers
Regards
Pavan

How to add a new printer and laptop to my home network

Similar Messages

Maybe you are looking for