How to add a new selection field in an infoset

Hi everyone,
I have a problem changing an infoset when I add an additional field. This field is added to its respective field group.
The problem is that after generate the infoset, I go to the transaction where the querys are made and the new field created has got only a checkbox in the column 'Output', while the column 'Selection' has no checkbox.
This only happens with this field, while the rest of the fields have two checkbox in column 'Output' and in column 'Selection'.
What can I do to make appear checkbox 'Selection' in order to make querys?
Thanks in advance,
Mayte

Hi again,
I have seen the threads about ad hoc querys but I'm still with the problem...
I'm going to tell you the steps I follow.. Perhaps someone is able to tell me what I'm doing wrong...
1. I go to S_PH0_48000513 transaction where I choose the infoset which I want to make queries..
2. In sq02 transaction I click right button in 'additional fields' in the field group where I want to add the field. I click create and fill long text, header, type, length and like reference...
3. Once the field is created I add the field in the 'field group' and generate the infoset
4. In S_PH0_48000513 I can see that the field has been added with no checkbox 'Selection' but only with checkbox 'Output'...
I need checkbox 'output' and I don't know why doesn't appear...
Thanks for your replies

Similar Messages

How to Add a new Selection Field in COPA Report

Hi Gurus
I'm new on SAP COPA reporting and I don't know how to solve this problem.
I need add a new Selection-screen field (char1), not connected with any characteristic.
This is necessary becuase if the user flag this field, when teh report is running I'll replace some key-figure values using the EXIT
ZXYEXF05. I don't find any instruction how to define this simple kinfd of variable, and use it into a Report.
Thank-you in advance for your help.
Claudio

Hi
I'll try to explain better my need.
I've 10 CO-PA Key-Figures used to Split in the Cost of a material in different Cost Items.
Using the customizing I fill these key-figures using some rules.
The new requirement is use SOMETIME the same KF, by displaying different Costs overwritting the original values using the exit ZXYEXF05. But I need to know when the user wants consider the original value of KF, and when he wants overwrite these values (when I have to run teh exit). So I thought to create a new Selection-screen field (Char1), to permit to the user to pass to some report this user request. I thought to define a global variable, and add it to several reports when this feature is required.
Can you suggest a better solution ???
I could create some empty KF and fill them using teh exit, but I would prefer not expand the CO-PA structure.
Thanks for help.
Claudio

How to add a new metadata field to iPhoto where new field is calculated as age in years and month based on a specific date and the date photo was taken ? I want to calculate and display the age of my two kids on every photo.

Hi
How can I add 2 new metadata-fields to every photo in iPhoto ?
The new fields should state the age of my kids in years and months based on the date that they were born and the date that photo is taken.
Exampel:
My son is born 01.01.2010
My daughter is born 01.01.2012
Photo taken by data
Aage of son
Aage of daughter
01.07.2011
1 year 6 month
not born yet
01.01.2014
4 year 0 month
2 year 0 month
I would like to be able to search by kids age and get the info displayed when doing slideshows.
How to do this in iPhoto ?
Any alternatives to accomplish the same ?
Kind regards

It can't be done with iPhoto. There are some DAM (digital asset management) applications that can write to other IPTC fields that iPhoto can't read. One such app is Media Pro 1.
However you would have to calculate the age for each date and add it to one of the fields. There are online age calculators that can do that for you: Age Calculators
If you go thru that much trouble then use iPhoto, make the calculations and add the age to the Description field. Then you can use Smart Albums to search for 1year 6 month text.
OT

How to add a new selection criteria in Automatic Payment process (F110)

Hi all,
We need to add new selection field in selection criteria tabstrip. Does a user-exit exist to interpret BKPF-USNAM as field name ?
Thanks in advance for your answers.
Regards,
Philippe.

pls look here
enhancenents
A.

How to add a new tab(field ) in selecting ranked list(cj20n)

Hi,
I want to add a tab/field for position of employee while selecting ranked list.As i have to select employees on the basis of their skills and positions .I have used requirement profile but it is selecting on the basis of skils and not on the basis of position.
If I select Item tab it selects on the basis of Positions But i want to select on the combination of both skills and positions.
So i want to add field (position ) when it shows ranked list of employees.
Thanks

Hi
I'll try to explain better my need.
I've 10 CO-PA Key-Figures used to Split in the Cost of a material in different Cost Items.
Using the customizing I fill these key-figures using some rules.
The new requirement is use SOMETIME the same KF, by displaying different Costs overwritting the original values using the exit ZXYEXF05. But I need to know when the user wants consider the original value of KF, and when he wants overwrite these values (when I have to run teh exit). So I thought to create a new Selection-screen field (Char1), to permit to the user to pass to some report this user request. I thought to define a global variable, and add it to several reports when this feature is required.
Can you suggest a better solution ???
I could create some empty KF and fill them using teh exit, but I would prefer not expand the CO-PA structure.
Thanks for help.
Claudio

Add new selection field in an infoset

Hi everyone,
I have a problem changing an infoset when I add an additional field. This field is added to its respective field group.
The problem is that after generate the infoset, I go to the transaction where the querys are made and the new field created has got only a checkbox in the column 'Output', while the column 'Selection' has no checkbox.
This only happens with this field, while the rest of the fields have two checkbox in column 'Output' and in column 'Selection'.
¿What can I do to make appear checkbox 'Selection' in order to make querys?
Thanks in advance,
Mayte

Check this thread.... This might help you.....
How to add selection texts in infoset?
Regards,
Pavan

Modify MB25 and add a new selection field

Hello All,
I need to copy MB25 to ZMB25 and add field to the selection screen and modify the select statement further. MB25 uses a LDB and I am never used LDB. Please help me how to do this and post some notes on LDB as I have lot of questions.
<b>FYI:</b> I made a Z copy of the program and in the program attributes, I see a LDB. I made a Z copy of the LDB and added a selection field. I donno if that is the right way or not. I am also not sure where to modify the selection based on the newly added selection field.
Thanks in advance
Chandni Reddy

from SAP help :
If you define the selection criterion for a column of a database table that supports dynamic selections, the values entered on the selection screen are transferred to the logical database. There, they are treated as dynamic selections. The logical database does not read records from the database table that do not meet these selection criteria. This kind of selection is much more efficient than for database tables that are not designated for dynamic selections.
Besides, the input fields for the corresponding dynamic selection are displayed on the selection screen from the start. This spares the user from having to choose Dynamic Selections to display the corresponding screen.

How to add a new selection criteria in a report painter

Hi
I would like to know how to add a selection criteria in a report painter. I believe in Gen data we can add our selection criteria but my there is no option to select company code in that. Can anyone help me in this
Thanks in advance
Sankar

hi sankar,
When u click on the Gen. Data Selection on the right side of the screen you can see the Available Characteristics.
On the same side u can see with the 3 colors blue, yellow and white....
Click on the that , in that screen click on the Administrator option.
There in that screen UNCHECK the company code.
Click on the ACTIVATE and CLOSE it.....
Again SAVE the table settings.... then you can find the Company code..
Hope this will helps u out...
Ranjit Kumar

How to add a new custom field to one set of employees within one country?

Hi,
I am thinking of a scenario where a new custom field is dispayed in PA30 for IT0006
only for one set of employees in US (such as for a employee group or employee sub group).
Other employees should not have this custom field.
All employees in this scenario is for US country only.
Is this possible? Do we need ABAP for this or only IMG will do?
Any details on how to implement this etc..
Thanks for any help.

Thanks for everyone for the responses.
I really liked the decoupling infotype solution.
However, since some work has been done in the old way, I will try to describe the problem in detail.
Our ABAPer already created a new screen 0200 as a sub-screen in ZP000600 module (I am assuming it is a module pool) using PM01 and assigned to 2010 screen; an alternate screen specified in IMG for country 10 as key (instead of standard screen 2000 for IT0006).
This new screen 0200 is assigned to 2010 in PM01 transaction.
These steps displays the 0200 sub-screen with added fields to all the US employees hiring in the respective personal action.
I want to create a new scenario to suppress these additional fields for some US employees (say company code BKUS)
I placed a new entry in T588M for module pool as ZP000600 , key is 10, alternate screen as 0200 and hide all the fields
But, these additional fields are still displayed always for US employees for whom I want to hide.
Did I miss any thing?
I do not want to hard code in ABAP whom to display and who not to.
Is there a IMG way to do this so that I can change the criteria later as we go.
Thanks

OIM: how to add a new search field in the Manage users page

Hi,
I want to add a new field to the menu of available searchable.
I have changed the
Lookup.WebClient.Users.Search and now I see my new field, but the search fails:
16:28:19,406 ERROR [WEBAPP] Class/Method: tcSearchUserAction/searchUsers encount
er some problems: Error executing procedure XL_SP_FindUsersFiltered
Thor.API.Exceptions.tcAPIException: Error executing procedure XL_SP_FindUsersFil
tered
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.findUsersFiltered(
Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperationsSession.findUsersFiltered(U
nknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(S
tatelessSessionContainer.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invo
What else I have to change to have an attribute of the user profile searchable?
Thanks a lot.

Hi Dost,
thanks for the quick answer.
I added this row to the mentioned lookup:
(code key) (decode)
Users.Personalcode Personalcode
Personal code is a custom attribute defined I added to user defined fields form.
Is that wrong?
Thanks again.

How to add a new additional field in MIGO

Dear Sir,
As a business requirement , we are required to capture some additional information related to Material packing /sizes at the time of MIGO . This information need to be captured /input at the Item level during the MIGO .
We request sap gurus , to kindly guide as what steps need to be followed for adding a new field and also will it require a Z-table also to save the data pertaining to new added field .
Regards
B Mittal

Hi ,
Create a BADI implementation for MB_MIGO_BADI .
Create a program with the screen type sub-screen in SE80 and design the layout for the custom fields.
Declare the custom fields in a Z**TOP include.
Under the PBO method declare the program name and screen number as shown below:
gf_class_id = 'MIGO_BADI_IMPLEMENTATION_CIN'
e_cprog = <program name>
e_dynnr = <screen number>.
e_heading = <heading>
Under PAI method declare the field to u2018Xu2019.
e_force_change = 'X'.
Under the line modify method declare a flag and set to u2018Xu2019 checking for material document number by which we can set the fields to be in display mode when we open MIGO for display of material document created after doing goods receipt.
Under the POST_DOCUMENT method write the code for appending the value to Z table along with the values of the line item .For these values to be available here in this method use the memory concept u201CExport to memory idu201D in the method LINE_MODIFY.
In order to do any validations to the custom fields, go to transaction SE80 and mention the program Name created and in PROCESS ON VALUE_REQUEST create a module and provide the validations required for those custom Fields.
order to make the fields to be in display mode during the display of material document, create a module under PBO and import the flag value in the method LINE_MODIFY and if that flag = u2018Xu2019, use
LOOP AT SCREEN.
IF SCREEN-NAME = <NAME>.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Retrieve the values from the Z table matching the key field (production order number) and pass the value of the custom field on to the screen.
Thanks,
Shailaja Ainala.

Add new selection fields and ALV output fields in VA05

Hi,
I want to add two new selection fields in VA05 'Further selection criteria' screen, also want to add some more fields in VA05 ALV output.
Please help me how i can do it using user exit ?
Thanks ,
Archana

hi,
You have to copy the standard program SAPMV75A to ZSAPMV75A, change them accordingly.

How to add a new field in MM01, with say contaminent as a field?

How to add a new field in MM01, with say contaminent as a field? I process that i know is i has to go the user exit and check out the three user exits that are available for MM01 after that what i have to do please can any one help me out with the procedure to proceed?

Hai venkateshwar reddy ,
try with these user exits
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
Refer these steps also
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/screen-exit-on-mm01-mm02-mm03-322717#

How to add a new data element for existing table filed(Primary key field)

Hi Experts,
How to add a new data element for existing table field(Primary key field)
For this filed ther is no foreign key relation ships and even check table.
while activating table it is giving message like below.
can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)
Primary key change not permitted for value table /TC/VENDOR
Check on table /TC/VENDOR resulted in errors
Thanks
Ravi

Hi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob

Hi All ,How to add a new field for MEDRUCK if we havea ZMEDRUCK

Hi All ,
        How to add a new field for MEDRUCK if we have a ZMEDRUCK
Req: If I want to add a new field for the following text editor line :
IN MAIN WINDOW > TEXT EDITOR> SERCH FOR TOTAL_AMOUNT-->
In that we will have
&ekko-waers&    &komkfkwrt&
(currency)       (numerics)
Pls send the Code to make these changes .Pls its urgent
Thanks&Regards.
Bharat.

Hi
If that field which you wants to add is available in one of the structures like EKKO,EKPO then you can add that field just beside the other fields
If that field is not there in the any of the structures then you can define a variable using define command
/: DEFINE &VAR&
/ &VAR& = <some value>
or you can write subroutines to fetch the data from outside tables and can use those fields data in the script
<b>Reward points for useful Answers</b>
Regards
Anji

How to add a new selection field in an infoset

Similar Messages

Maybe you are looking for