How to add a photo filter image adjustment layer?

In this tutorial at the last step it says to add a photo filter image adjustment layer on the image to give it a warm finish, I can't see any adjustment palette as shown in image. I use a CS3 Extended.

Wow, again I stand corrected.
I have a perceptual "blind spot" when it comes to finding textual entries in lists. It's a "hidden in plain sight" kind of quirk that I normally work around either by being diligent or finding another way (e.g., pressing the button I highlighted above). I'm sure magicians and people who design camouflage would understand it.
I actually looked in both Photoshop CS5 and CS3 and didn't perceive that entry before I wrote my post above. I probably looked right at it but didn't sense it was there. I was even thinking of writing up a bug report. Now, of course, since you've pointed it out, I go back and look again in my copies of Photoshop and I do see it. It's a bit of a scary realization, as I have to wonder what else in life I've missed because of this. I'm reminded mildly of the scene in the old film "The Andromeda Strain" where the lab worker sees a flashing red "NO GROWTH" indicator but doesn't take action on it because of an epileptic block.
Thanks again for setting me straight MTSTUNER. I continue to learn a lot from you.
-Noel

Similar Messages

When I add a photo filter to an image, I can't use the color sampler in the photo filter dialog box. It automatically selects white. What am I doing wrong?

Whenever I add a photo filter to an image, I can't use the sampler tool that automatically appears when you open the photo filter dialog box to manually select the color of your filter. Whenever I try to use it, it automatically selects white (#ffffff), no matter where I click in the image. Does anyone know what I'm doing wrong?
Thanks

When you add an adjustment layer, the layer mask is automatically active. You need to activate the pixel (image) layer by clicking on it in the Layers panel.

How to add a border to image

I am a newby to Photoshop. All I want to do is add a
border to my image. Can't find a tutorial. Help?

Thank you. It looks very helpful.
Date: Mon, 27 Jun 2011 15:03:52 -0600
From: [email protected]
To: [email protected]
Subject: How to add a border to image
Here's a little video from Adobe TV that shows you how to create borders in Photoshop Elements. If you don't have Photoshop Elements, skip the first 1:25 of the video, the rest of the steps apply to Photoshop as well:
http://tv.adobe.com/watch/learn-photoshop-elements-9/creating-a-photo-borde/
>

How to add a photo from a collection to a book in Lightroom 4.1?

How to add a photo from a collection to a book in Lightroom 4.1?

Save the book, then go back to Library and add the photos there.

How to add byte[] array based Image to the SQL Server without using parameter

how to add byte[] array based Image to the SQL Server without using parameter.I have a column in table with the type image in sql and i want to add image array to the sql image column like below:
I want to add image (RESIM) to the procedur like shown above but sql accepts byte[] RESIMI like System.Drowing. I whant that sql accepts byte [] array like sql image type
not using cmd.ParametersAdd() method
here is Isle() method content

SQL Server binary constants use a hexadecimal format:
https://msdn.microsoft.com/en-us/library/ms179899.aspx
You'll have to build that string from a byte array yourself:
byte[] bytes = ...
StringBuilder builder = new StringBuilder("0x", 2 + bytes.Length * 2);
foreach (var b in bytes)
builder.Append(b.ToString("X2"));
string binhex = builder.ToString();
That said, what you're trying to do - not using parameters - is the wrong thing to do. Not only it is insecure due to the risk of SQL injection but in the case of binary data is also inefficient since these hex strings are larger than the original byte[]
data.

How to add Material photo in SAP

Hi folks,
    Does anybody know how to add material photo to material No?
     As now, when our old spare parts are bad, maintanance user have to find a new one to replace, so they need to provide the material No to warehouse user or purchase dept.
    But now as there are a lot of spare parts in SAP, iIt's difficult for them to appoint SAP material No from layout, so we want to add photo to material No.
Great thanks!
Li Jing
Edited by: Li Jing on Apr 2, 2010 12:14 PM

When viewing material, from main menu select System > Services for Object.
You may get a choose object type option, if you do, choose a std way to work e.g. always use Object = Material.
You'll then get a mini free floating toolbar. Select the far left Icon and Create an attachment. Navigate to your picture and upload.
To view the picture, select the Icon second left (this is greyed out if there are no attachments).
You can attach any number of pictures or Word documents etc.
Regards,
Nick

How to add tool tips on Image Icon obj?

how to add tool tips on Image Icon obj?

Take a look at the link shown below where drawing is done on a JButton -- you can draw your image on a JLabel too.
http://developer.java.sun.com/developer/TechTips/1999/tt0826.html
By drawing on a JLabel or JButton, you can add tooltiptext when needed.
;o)
V.V.

HT1296 how to add new photos without deleting the existing photos in ipad

Hi,
Can anyone tell me how to add new photos/PDF books from my PC to iPad without deleting the exsting data in iPad?

Hello AJ2349
If it is prompting you that it will replace the data on your iPhone, then that is typically the result of syncing with a different computer. The only way you can bypass that is to replace the media on your device and then sync. Now it will only replace items that would be considered purchased items like music, movies, TV shows and Apps and would not delete any pictures from your iPhone. Alternatively you can setup a Shared Photo Stream and then add the Photos there without syncing your iPhone with your computer. Check out the articles below for more information.
iOS: Issues syncing content with multiple computers using iTunes
http://support.apple.com/kb/ts1474
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/ht1535
iCloud: Shared Photo Streams FAQ
http://support.apple.com/kb/HT5903
Regards,
-Norm G.

How do I create layers in an adjustment layer and transfer those layers?

How do I create layers in an adjustment layer and transfer or duplicate those layers in another image ?
I need to transfer the same colour readjustment from one image to several other images ... I have been told to do this in the adjustment layer platform how ever I cannot drag or copy those layers over to the other images I have open and in need of adjustment to the same layers ...
Images shows my lay out and what i've done this far.
Thank you

You need to get out of single image view. Go to the editor preferences>general>Allow Floating Windows, then go to Window>Images>Float all in Window, then Tile or Cascade. Then you should be able to drag the layers from the layers panel for one image into the main image window (not the panel) for another image.

How to add all photos in one Album

Hi,
I bought iMovie yesterday and I have albums in photos application. I want to add all photos in one album to iMovie.
Thanks
Best Regards

They can only be added one at a time, a bit annoying but that's the way.
Add photos
With your project open, scroll the project timeline so that the playhead (the red vertical line) appears over the location where you want to add the photo; you can move the photo later if you want.
If the playhead is resting over a video clip, the photo is added before or after the end of the clip closest to the playhead.
Tap the Media Library button , and then tap the Photos button at the bottom of the screen.
Tap Camera Roll, Photo Library, or an album, and then tap the photo you want to add.
To preview a photo before adding it, tap and hold the photo in the Photo browser until it appears in the pop-up viewer.
The added photo appears for a duration of 3 to 6 seconds, depending on the length of the transitions that appear before and after the photo, but you canchange this duration.
A Ken Burns effect is also applied to the image, which means the camera appears to sweep across and zoom in on the photo. You can adjust this effect. Go to Edit a photo to learn how.
You can ask Apple to fix this in the next update:
http://www.apple.com/feedback/imovie_ios.html

How to add a photo to a pdf form via the iOS app

How do I add a photo to a pdf form via the iOS app? I need to fill out a form for work using field observations and photos. I can easily fill out the text portions of the form but I'm unable to add the photos from my phone. Is this possible?

Does the form have a provision to insert images (e.g. a Browse button)?
[topic moved to iOS subforum]

How to add a new filter in an existing web service method (BIWS - WEBI document)

Hello Experts, we have 7 web service query's connected to a dashboard. Basically it is one WSDL URL and 7 Get Methods...Web service queries are BIWS (via WEBI document instance). There are filters setup for each of these web service methods.
Recently there was a request to add 2 new fields to the webi document and also the 2 fields need to be included as filters in the 7 methods. I know there is an option to edit the method, but when i edit the method, i cannot find the 2 new fields in list to set as filters.Can anybody help me understand how to add filters to an existiing web service method? I do not want to delete the method and republish the block as web service.
Any help will be great and points rewarded.
Thank you
Ann

Hi Ann,
The reason you are not able to see any of the new columns as a option to select in your web service block is because when you have published that block, they were not present. Add these two new objects in your block and publish it again. You will be prompted for duplication content. Select the highlighted block for duplicate and now you can see the new added objects in the filter option. Update and this will overwrite your published block. Please note, web services do appear to behave weirdly when used with dashboards so I request you to please try it in a separate test report first.
Hope that helps.
Regards,
Tanisha

How to add a alert filter in ipsmc for version 5 signatures

I am trying to understand how event or alert filters work in version 5.x. If I use VMS ipsmc to manage the sensors, how do you add a sensor filter for a particular event that we do not want to see appear in the SecMon console any more.
It looks like you have one of two options however i am not sure of the method to follow. you could edit the signature its self or it seems that you must use Configuration Settings > Event Actions (IPS 5.x) > SigEvent Action Filters
I would like to create a filter from any to a single address host IP address but when I select the add button, I only have the option to specify a range of addresses. Do I just enter the single address in the start field and then leave the finish field blank?
The filter should not alert or take any action. How do I exclude certain destination or source IPs from producing an alert?

We are still trying to get this filter to work. Can anybody give us an example of how it should look on the sensor?
The sensor filter that we would like to create should exclude any source IP, any source port to specific destination hosts on all destination ports (icmp has none) from capturing events and storing them in the event store on the sensor.
This is the filter that we have so far on the sensor. Whats the problem with it?
service event-action-rules rules0
filters edit icmp-w-echo-filter-sensor-sensor-0-D
signature-id-range 2100
subsignature-id-range 0-255
attacker-address-range 0.0.0.0-255.255.255.255
victim-address-range a.b.c.x,a.b.c.y
attacker-port-range 0-65535
victim-port-range 0-65535
risk-rating-range 0-100
no actions-to-remove
deny-attacker-percentage 100
filter-item-status Enabled
stop-on-match False
no user-comment
exit
filters move icmp-w-echo-filter-sensor-sensor-0-D begin
exit

How to add a photo to Apple Mail signature...? (he asks laughably)

Since the sender's Address Book photo is not included with emails sent
(even 'though Apple Mail makes it look like they are),
how can you add a personal photo to a Mail signature?
OR, is there another means of including a personal photo with every email sent?
**** How many people have asked for this feature / capability? More than 10,000?
Thx.

How many people have asked for this feature / capability? More than 10,000?
As a matter of fact I have never seen it mentioned before. Perhaps only a few people need such an ego-trip every time they send an email.
The normal way is to add a photo within the text or as an attachment. The Signature only handles thumbnails.
But you can send your suggestion to Apple via their feedback link:
http://www.apple.com/feedback/
It will be read but you will not receive a reply.

How to add a photo album

how can i add a photo album using contribute? And what photo
album software can i use?

how can i add a photo album using contribute? And what photo
album software can i use?

How to add a photo filter image adjustment layer?

Similar Messages

Maybe you are looking for