How to add a system into Solution Manager directory.

Hi!
Can anybody tell me how to add a system into Solution Manager directory before generating license key for ECC installation .
Also,
How to connect the XI in same box with SolMan and ECC in defferent server to SolMan 3.2 .
I am going to install SolMan and than XI in and box and after that ECC in a seperate box.
AM I right?
regards,
Pratip Bhattacharyya

Hi Bratip Bhattacharyya,
SolMan 3.2 needs SLD only for automatic data gathering of the sap landscape; you can choose between SLD and LIS in transaction SMSY_SETUP (which simply uses the TMS-domain controllers for information gathering).
XI needs SLD, but XI needs also a netweaver04 (s) system (Abap WAS 6.40). SolMan 3.2 isn't a netweaver04 system (Abap WAS 6.20). So you have to install XI as an own central instance (Abap + Java) on the same windows server, if you like. In this case you have to install for XI an own SLD. Different SLDs can create bridges between themselves. Please look at the SLD configuration guide (quicklink /netweaver -> installation guides).
But don't ask me how to install two sap systems on one server on windows (on Linux it's easy I have done so); basically it will have an own SID and own "service" numbers (which means own tcp port numbers).
If you can't dedicate to XI an own server, it's only a question of hardware sizing. For the different combinations of netweaver components you should study the master guide for netweawer.
Bye
Message was edited by: Riccardo Escher

Similar Messages

How to configure satellite system in Solution manager

Hi,
Please advise me how to configure satellite system in solution manager.
Regards,
Asif

Hi,
can you check this installation guides
[ http://service.sap.com/solutionmanager][http://help.sap.com/saphelp_smehp1/helpdata/en/b7/07e4cf1a364a0482e29122c329b7d3/frameset.htm]
Regards,
Muralidhar

How to add enterprise Portal in Solution manager

Hello,
I wanted to add the enterprise Portal system in Solution manager ( for Service desk ) in SMSY.
Can anybody guide me how can I add the EP( enterprise portal system) in Solution manager
Regards,

Hello,
What is your SLD look like?
You have to connect the EP to SLD and use the LANDSCAPE FETCH job to import to SMSY - Txn SMSY_SETUP - Source SLD.
Now the non abap system data present in the SLD will be reflected in SMSY.
Refer below threads:
How to define an enterprise portal system(JAVA) in SMSY in solution manager
Re: Creation of solution for J2EE system
How insert Enterprise portal in Solution Manager
Regards
Vivek

Add BI System in Solution manager

Hi All,
I need to add BI DEV, BI PRD Systems to solution manager. As per my understanding first i need to create logical systems, after wards i have to add this system in SMSY.
I will be glad if some one can post ur suggestions and procedure to add this
Thanks

Hi,
this is same for all the system. only you have to select appropriate product instance
please refer this screenshots here [SMSY Set Up|http://www.way2sap.com/sap-article/adding-a-sap-system-to-smsy-of-solution-manager-1907/]
get the other set up guides on service.sap.com -> release and upgrade info -> installation and upgrade guide -> SAP components -> SAP Solution Manager -> Operation guides.
Thanks
Jansi

How to add business systems into DIRECTORY?

Hi,
I have problem to add business system into Business Systems list in my scenarion in the Integration Directory. These systems are already in the SLD, but when I try to assign a business system, I have only choice to assign XI...
How to solve this problem?
Thanx 4 answers!
Peter

hi Peter,
maybe your business systems are already inside ID?
BTW
did you assign you business system to a correct
integration server? (when definig the business system)
also remember to refresh SLD data cache from ID
- environment
- clear SLD data cache
Regards,
michal
Message was edited by: Michal Krawczyk

How to remove Production System from Solution manager.

Hi All,
We have Three system landscape and solution manager installed.
All the system are managed by Solution manager.
here we are looking to remove the Production System from Solution manager.
as in case if is there any problem in solution manager then we are not dependent on it.
things will work directly on Production system.
Could you please let us know the procedure to remove the system from solution manager.
Please let us know if is there any document provided by SAP.

Hi,
Have you implemented charm,ccms monitoring or any other functionalities?
if yes,.Delete the sytem from tms domain. and TR route needs to be adjusted, if you are using ccms, remove the agent details from RZ21 also.
Does your production system data coming from SLD?
if yes, Delete the entry from SLD
if both the answer is no.
1.delete RFC from SOLMAN to the production systems.
2. delete the production system using SMT2 transaction.
3. Remove system rom SMSY from SOLMAN.
Thanks,
Jansi

How to add PS functionality in Solution Manager

Hi,
I am trying to add the PS functionality into the structure in Solution Manager. Can someone tell me where it is in the structure. I look it up on SOLAR_PROJECT_ADMIN (scope-Template selection) and in SOLAR01, but I don't find Project System.
Thanks!

Hi,
You need to Have the Java Software compoent of Enterpirse portal defined under software components.(You can have the source from SLD).
Then define the new system, Database for your SID and correct product version.
Give the software comeponent information in the main Instance selection.(Reference it).
Hope this helps.
Revert if you face issues.
Thanks,
Jagan

How to add buisness system in Integration directory -objects

Hi All,
I created the technical systems and buisness systems. then in the integration directory, i want to check whether my business system exixts are not.
so in the integration directory,
objects--->service without party >buisness system>
in the buisness system , whatever buisness system i created the is not found.
how to add buisness system into integration directory -- objects.
Regards,
vinoth.

Hi,
go to integration directory,
objects--->service without party >buisness system>
select the BS -> Right click the BS -> it show the number of BS select your business system and assign them next save.
If the your business system if it's not appear go to Environment menu -> Clear SLD Data cahce.
and do the same process again..
Regards,
Venu.

How to add EP(DEV and QAS and PRD systems in solution manager)

Dear Gurus,
I want to include EP dev and qality and prodution systems in solution manager .
While installation of EP(only ASJAVA it is not having ASABAP) i selected solution manager as a Central SLD. But i deleted the systems in solution manger and recreated it again. I created all the systems and datatabae and logical components but in maintenane optimizer it is showing only production system but it is not showing development and quality systems in maintenance optimizer.
How to see developmnet and quality systems in maintenace optimizer.
Same thing for ECC also.
ECC dev and quality systems installed in the same server.
In maintenace optimizer it is showing only dev sysetm it not showing quality sysetm.
Can any body help this probelm.
Thanks & Regards
Rao.

I think you need to adjust your filter settings in the initial screen of MOPZ.
It's in the right top corner.

Add sap R/3 enterprise system in solution manager SLD

Dear All
Required solution manager configuration documents.
We have DEV QAS and PRD server on SAP mySAP ERP 4.7 ( SAP R/3 Enterprise )
And during the installation of solution manager I select u201CConfigure a Local SLD u201C
Which steps I follows to connect or configure my sap system with solution manager ( SLD ) then I will configure central monitoring, TMS management, Helpdesk etc
Who to Configure SLD Bridge ( in SLD Server ) ?
in which system Run Transaction RZ70 ( In SAP R/3 Enterprise ) ?
and how to Verify that my system is connected and working fine With SLD
Please help me regarding u201C configuration solution manager u201C
Regards
Shahid

Hi
Visit for step by step details of Standard Configuration of Basic Settings
http://service.sap.com/rkt-solman-->SAP Solution Manager 7.0->Technology Consultants & System Administrators->Technical Configuration->just drill out there you can find lot of simulator how to install and configure solution manager
http://www.wilsonmar.com/sap_solution_manager.htm
/people/federico.babelis2/blog/2006/04/14/service-desk-configuration-guide-for-dummies
Regards
Uday

How to create Rfc for EP system in Solution manager

Dear experts,
I am doing ChaRM configuration for my EP system ( java only).
I also configured CTS+ successfully but we want to integrate this with Chram in solman.
I have done all configuration according to standard doc for ChaRM.
But when creating project from solar_admin it is giving "   NO RFC for DEP system"
so please suggest me how to create RFC for java system in Solution manager.
thanks in advance
dhiraj

Hello,
You need to setup an ABAP communication client and system, that's done through the TMS settings:
For source system:
- CTC                                              1
- CTS_SYSTEM_TYPE                          JAVA (others for a MDM system)
- NON_ABAP_SYSTEM                          1
- COMMUNICATION_SYSTEM:              (SAPSID of the ABAP communication system (e.g. the domain controller))
- NON_ABAP_WBO_CLIENT                    (Client of the ABAP stack on which the Transport Organizer Web UI (CTS_BROWSER) is activated and will run.)
- WBO_GET_REQ_STRATEGY                 TAGGED
- WBO_REL_REQ_STRATEGY                 MANUAL
For quality and production Java system (target systems):
- CTC                                              1
- CTS_SYSTEM_TYPE                          JAVA (others for a MDM system)
- NON_ABAP_SYSTEM                         1
- COMMUNICATION_SYSTEM:                 (SAPSID of the ABAP communication system (e.g. the domain controller))
- DEPLOY_WEB_SERVICE                       CTSDEPLOY
- DEPLOY_DATA_SHARE:
When this is done correctly, you will see the fields ABAP communication system and client populated in SMSY.
When ChaRM needs to operate on the non ABAP systems, it will take the RFCs for the communication system and client.
Best regards,
Miguel Ariñ

How to integrate BeX Web Applications into Solution Manager

Dear All,
I am integrating the BeX Web Applications into Solution Manager. My Scenario is to add a button named 'Support' wherein when I click the button it should take me to the solman BSP Page. I have saved the two templates - oadhoc & 0adhoc_table by making it 'Z' and added a button in Zadhoc_table. but when I click the button it is not picking the values of an object from the first template.
Kindly help me to get the solution.
Best Regards,
Priya

Basis Team,
Please check this document link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ad0a4b07-0301-0010-5095-ef7615676fc0
Hope this document link helps you.
Thanks
Mona

How to add these system in the system ID list?

Hello:
    Now I have a another problem in Setting Up Central Auto-Reaction Methods.I have created in solution manager, In the system ID list,I want to have development system ,production system,and other system,because I want to alert these system,but I don't know how to add these system in the system ID list?Dose it need RFC?
    Please someone tell me.
     lexian
     Thanks a lot!

Lexian,
You need to some of these things for the SAP systems to show up in Solution Manager
1. Install the Monitoring Agents (SAPCCM4X for ABAP instance and SAPCCMSR for J2EE instance etc)
2. Configure RFCs from Solution Manager to the Satellite (SAP) systems.
3. Create CSMREG user.
4. Create Monitoring jobs.
These are just some of the things that you will have to do. Refer this link on how to do this
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a7da1505211d189550000e829fbbd/frameset.htm.
This is for the broader view of the entire thing
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a7da1505211d189550000e829fbbd/frameset.htm
I would suggest starting with the second link.
Let us know if you have any questions
Kunal

How to check the messages in solution manager?

hai experts !
how to check the messages in solution manager?
in which transaction do we see them?

Hi Kiran,
From what I gather from your brief question, you are perhaps looking for CRM_DNO_MONITOR that would display all queries created from Satellite/SolMan system itself, as support messages.
If you are looking for Notifications underlying those messages, please look for DNOTIFWL.
For more specific answers, please provide more description of what you are looking for.
Trust this helps.
Regards,
Srini

How to add a report into the SAP-SCRIPT .using PERFORM ......ENDPERFORM

My question is that How to add a report into the SAP-SCRIPT .
by using PERFORM ......ENDPERFORM
I don't know how to used it .

Hi Sandeep,
Please check this link
http://help.sap.com/saphelp_40b/helpdata/en/d1/803279454211d189710000e8322d00/content.htm
http://www.allinterview.com/showanswers/37425.html
Calling ABAP Subroutines: PERFORM
You can use the PERFORM command to call an ABAP subroutine (form) from any program, subject to the normal ABAP runtime authorization checking. You can use such calls to subroutines for carrying out calculations, for obtaining data from the database that is needed at display or print time, for formatting data, and so on.
PERFORM commands, like all control commands, are executed when a document is formatted for display or printing. Communication between a subroutine that you call and the document is by way of symbols whose values are set in the subroutine.
Syntax in a form window:
/: PERFORM <form> IN PROGRAM <prog>
/: USING &INVAR1&
/: USING &INVAR2&
/: CHANGING &OUTVAR1&
/: CHANGING &OUTVAR2&
/: ENDPERFORM
INVAR1 and INVAR2 are variable symbols and may be of any of the four SAPscript symbol types.
OUTVAR1 and OUTVAR2 are local text symbols and must therefore be character strings.
The ABAP subroutine called via the command line stated above must be defined in the ABAP report prog as follows:
FORM <form> TABLES IN_TAB STRUCTURE ITCSY
OUT_TAB STRUCTURE ITCSY.
ENDFORM.
The values of the SAPscript symbols passed with /: USING... are now stored in the internal table IN_TAB . Note that the system passes the values as character string to the subroutine, since the field Feld VALUE in structure ITCSY has the domain TDSYMVALUE (CHAR 80). See the example below on how to access the variables.
The internal table OUT_TAB contains names and values of the CHANGING parameters in the PERFORM statement. These parameters are local text symbols, that is, character fields. See the example below on how to return the variables within the subroutine.
From within a SAPscript form, a subroutine GET_BARCODE in the ABAP program QCJPERFO is called. Then the simple barcode contained there (u2018First pageu2019, u2018Next pageu2019, u2018Last pageu2019) is printed as local variable symbol.
Definition in the SAPscript form:
/: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
/: USING &PAGE&
/: USING &NEXTPAGE&
/: CHANGING &BARCODE&
/: ENDPERFORM
/ &BARCODE&
Coding of the calling ABAP program:
REPORT QCJPERFO.
FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA: PAGNUM LIKE SY-TABIX, "page number
NEXTPAGE LIKE SY-TABIX. "number of next page
READ TABLE IN_PAR WITH KEY u2018PAGEu2019.
CHECK SY-SUBRC = 0.
PAGNUM = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY u2018NEXTPAGEu2019.
CHECK SY-SUBRC = 0.
NEXTPAGE = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY u2018BARCODEu2019.
CHECK SY-SUBRC = 0.
IF PAGNUM = 1.
OUT_PAR-VALUE = u2018|u2019. "First page
ELSE.
OUT_PAR-VALUE = u2018||u2019. "Next page
ENDIF.
IF NEXTPAGE = 0.
OUT_PAR-VALUE+2 = u2018Lu2019. "Flag: last page
ENDIF.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.
Best regards,
raam

How to add a system into Solution Manager directory.

Similar Messages

Maybe you are looking for