How to add a time stamp to an array

 Currently the VI that I have attached has the capacity to log data from the set of 14 arrays. I currently have a tick counter hooked up. However, I would like to add a time stamp that will display the elapsed time in seconds from the begining of the data logging. Could anyone help me out with that? Please see the attached VI and sorry for how messy it is, I have yet to go back and clean up the wiring. 
the mess of arrays on the lower left hand of the while loop feed into the "Index Array" building block and from there they will be scaled (for most of the wires the multiplyer is just there so that I can see what channel they will be when I hook it up for logging) The wires then feed into a "Build Array" Building block and I assmed that is where I had to hook up the time stamp for me to be able to log it.
Thanks,
Attachments:
PDAQ56 datalogging V11.vi ‏104 KB

mets501 wrote:
  Also, try pressing Ctrl-U on the block diagram.  It cleans up the wires for you atomatically :-)
Jeremy
That tool does not exist before LabVIEW 8.6.  The original poster attached a VI from LV 8.0
Attached is the VI where I ran Block Diagram cleanup in 8.6.1f1 and back saved to LV 8.0.  I went through and cleaned up almost all the coercion dots as well.
The original poster should start working from this file since it is much cleaner than the one they posted.
Attachments:
PDAQ56DataloggingV11.vi ‏84 KB

Similar Messages

  • How to add a time stamp to a video edited in Photoshop CC?

    Hello fine ppl of Adobe communities.
    I was wondering how can you add a time stamp to a video when edited in PS CC, is it possible at all? I dont have premier but I do have PS and LR.
    Appreciate any help.
    thanks

    If you use File > Place Embedded, you'll be able to resize and place (move, rotate, etc.) images as appropriate in your open document with the added bonus of having them added as Smart Objects. (Note that using Smart Objects can greatly increase the file size of your document. Just be aware.)
    File > Place Embedded > resize and place (hold down Shift to constrain proportion as you resize) > confirm by clicking the checkmark or "commit" icon.
    For layers that already exist, right-click the layer in the Layers panel > Convert to Smart Object.

  • How to add date/time stamp to PDF in Acrobat 9 Pro?

    Hello,
    I'd like to add a date/time stamp to a PDF so that when I print the document, the current date/time will be printed as well.  Is it possible to do this?  I found the following posting (http://forums.adobe.com/thread/502915), but am not able to get it to work for me.  I don't really know anything about using Javascript.  Any help would be much appreciated.
    Thanks!

    Not sure it will work, but you can try using the app.hideMenuItem() method. See reference here.

  • How to print date & time stamp on photos?

    How to print date & time stamp on photos?

    Three methods:
    File>process multiple files>labels. Be sure to uncheck "same as source", or the originals will be overwritten. It is best to work on duplicate files, esp. while learning.
    Use the horizontal or vertical type tool to add the information manually to each picture file
    If the same information is to be applied to several pictures, e.g. a copyright notice, use  of a brush made in PSE is very efficient

  • How to display the time stamp in a data log table

    Hello,
         I want to display data during the data acquisition process. How do I  add the time stamp as one of the column in the 'Result Table' located at bottom left of the example code?
    Thanks,
    Ryan
    Solved!
    Go to Solution.
    Attachments:
    Cycle Analysis.vi ‏229 KB

     I inserted the portion you added to my program and it worked but not exactly the way I want. It added the time and date when I start the data acquision. But I want the time stamp to be shown on every single row. Please see attached image.Thanks.
    Attachments:
    Result.JPG ‏54 KB

  • Add the time stamp ater file name (suffix)

    Hi friends,
    i need help for below requierment.
    I want to add the time stamp for my file name.
    like *filename YYYY-MM-DD-HH-MM-SS.txt*
    i don't know how to wirte the UDF for this. please any help me on this.
    thanks
    Srini..

    Hi,
    You have to Use Add Time Stamp Option in the Receiver File Adapter--Under File Construction Mode
    Check this
    http://help.sap.com/saphelp_nw70/helpdata/EN/ae/d03341771b4c0de10000000a1550b0/frameset.htm
    REgards
    Seshagiri
    Edited by: N V Seshagiri on Oct 14, 2008 2:02 PM

  • How to add a time delay of microsecond in labview 2011

    can you please help me, how to add a time delay of microseconds in labview 2011 version . I expect a helpful replies

    A delay between what and what?
    Is this plain LabVIEW, LabVIEW RT, or LabVIEW FPGA? What kind of data acquisition hardware are you using?
    What is your OS? An accurate "software only" delay of microsseconds is not possible on windows or any other general purpose OS.
    perumpadapu wrote:
    ... I expect a helpful replies
    To get a helpful reply, you need to provide much more detail on what you are trying to do!
    LabVIEW Champion . Do more with less code and in less time .

  • Add Date/Time Stamp to Timecode Effect

    The Timecode effect of CS5 Premiere Pro is a very useful feature. However, it is missing a Date/Time Stamp. I would encourage everyone to submit a feature request for this. I have enclosed one I submitted. You can cut and paste it into the Feature Request Submission Form.
    Feature Request Submission Form
    Feature Request: Add Date / Time Stamp to Timecode Effect
    The Timecode effect of CS5 Premiere Pro is a very useful feature. However, the Timecode effect is missing the ability to also display the Date/Time Stamp from Premiere captured video. This is a very important feature to include. Many videographers are archiving their miniDV tapes as AVI files since disk prices have become affordable. When I retrieve archived AVI files, I often need to look at the Date/Time Stamp, but unfortunately, Premiere does not offer that ability.
    I would encourage you to add Date/Time Stamp capability to the Timecode effect so timecode, date, and time could be displayed all at once, or selectively picked via checkboxes.
    Others in the Premiere forum have requested this capability.
    Date / Time Stamp - Premiere CS4
    http://forums.adobe.com/message/2564766
    Hopefully, you could add this as an update to CS5. And hopefully, as soon as possible. Thanks

    I am fairly new to Adobe CS6 however I have to totally disagree with some of the replies here on this subject. The package cost me well over £1200 and I expect a say in improving it along the way if I am to progress on to CS Cloud. The suggestion that engineers could spend their time elswere is total rubbish,its what they are well paid for..to listen to consumers suggestions and act on them (I am paying for their time).  I would for one love to see the simple add in plug where the original date/time code could be added and burned into the video timeline. It is obvously not something needed by all but for some it could be essential. For my work I entirely rely on the original date/time code to be visible and burned in. My work is editing surveilance video and I also have to pixellate all faces of young persons so the addition of a date and time code plug in is something I would like to see in After Effects and Premier. Adobe add hundreds of filters/plug-ins that nobody in the world are likely to ever see or use or even asked for, so I cant't see why it would be a big task for them to include it in CS6 or Cloud for the future, especially as many ask for it.
    On the suggestion of DVMPro, yes this is an excellent package which I already use along with vATS (which is quicker),  however the big downside for both these programmes is they do not combine the clips so if I put in 60. mts clips I will get  out 60 clips of what ever format I picked (limited to AVI/Wmv/AVCHD). You would then need combine and re-render the clips or work along the timeline with lots of clips (obviously not in AE as it wont combine clips along one layer....at least I cant see a way to do it (no doubt will be flamed on that one)
    Sony vegas 11 also does not have the capability neither to add and burn in the original timecode however there is an excellent and tiny .dll third party extension called SVDTS that will add the original time/date/seconds to the timeline and burn in to the video. My point on this comparison is that it would not take a lot of time and work for a capable Adobe enineer to develop and implement such a plug in.
    A crude way and free to actually achieve this is to use Freemake Video Converter, add all  your .mts (or what ever format they are so long as its original), turn on the Subtitle 1 option for each clip (no batch turn on Im afraid) and chose to join the clips for output to what ever file format you choose. The original timecode and date will be on your output video clip, not as pretty as DVMPro or vAts but is there and accurate.

  • How to find the time stamp for delata

    Hi Analysts,
    I am loading data from R/3 to InfoProvider(Cube or ODS) with delta update.
    I have seen nodata was loaded to InfoProvider. But data was available at DataSource. then new delta is started. i want to load the last delta again.
    How to see the time stamp of delta?
    How to load that delta data?
    Please help me in this need.
    Hari.

    Dear Srihari,
    if your last delta failed then you can request it again by calling the same delta infopackage again, it will ask for repeat delta (in case last delta has failed), go and run it.
    this way you can have your delta figurs back, and do upload via PSA.
    Hope it helps.

  • Adding time stamp to table/array

    Hi,
    In my posted VI I am displaying some collected temperature data on a table.  What I am having trouble with is getting the time data to work properly on the table.  When I set the include time data to true, it reads out the time as 1904 etc. I'm not sure if it's possible for me to include a time stamp in my array because when I try to convert a time stamp to a double precision float, the output is still a cluster, and thus cannot be added to the array.  I've also tried to convert the array to a string and concatenate the time stamp on, but the signals input for the table does not accept strings, and because I would eventually like to export this table to a spreadsheet in a file, I don't really want to link the strings to the indicator directly.  I've tried to work with the instrument as well, but when I read time data from it it gives it back in the form of multiple numbers, such as 2008, 8, 28, 13, 30, 31.12 and I can't consolidate it to one number.  Needless to say, I'm a little stumped and am open to suggestions on how to fix this problem, whether its a quick fix or a change in the way I'm trying to record the data.
    Thanks in advance,
    Mike
    Message Edited by mbeenen on 08-28-2007 03:59 PM
    Attachments:
    Automated Thermal Testing Table.vi ‏75 KB

    Here are the sub VI's that I'm using.  The inner while loop is designed so that the loop will halt immediately when stopped, and not have to finish its current iteration, as the iteration period is intended to be rather long.  I may modify the program to have a programmable start/stop time later, but this is at least my temporary solution.  The purpose of the decimate array function is to seperate out the channel label from the actual data so they can be placed as headers in the Excel function.  The intent was likely not clear with the lack of the SubVI's.  Overall, the display table on the front panel is no longer necessary, it was just for me to see how the table was working in the early stages of development.
    The one issue I had with your suggestion is the fact that I the build waveform function only accepts a 1-D array for the waveform input, and with multiple and variable number of channels being used I'm not sure how I could easily manipulate the data I gather into multiple 1-d arrays.
    As always the help is appreciated,
    Mike
    Attachments:
    Write_Table_To_XL_Mod.vi ‏39 KB
    Conf Temp 2.vi ‏37 KB
    EZ Temperature.vi ‏20 KB

  • How do I add a time stamp to the moving "Major Grid Lines" of a Waveform Chart?

    Hello
    I am using LV 8.5.1
    I am using a Waveform Chart and I have turned on the "Major Grid LInes" using the properties tab of my waveform chart. (properties-->scale->grid lines)
    When the code executes, I want to attach  a time stamp to each moving yellow grid line.
    So as the grid lines move from right to left, there is an associated time stamp for each.
    Can someone help!
    thanks
    J
    Solved!
    Go to Solution.
    Attachments:
    how do I add time to the yellow grid lines.vi ‏16 KB

    hova2010,
    If you right click on your graph and go to X Scale >> Style >> and then choose one of the 3 styles on the far left you shoul see timestamps for those grid lines.
    Ben Sisney
    FlexRIO V&V Engineer
    National Instruments

  • How can i add a time stamp to tdms file?

    I want the data and the time for the tdms file generated?
    how can i do that?
    should i cinvert .tdms to .lvm and use the data storage option or excel add on option for .lvm file created?
    cant i directly have the time stamp for tdms file generated?

    How are you acquiring the data in the first place?  That will matter in how we want to approach this.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Need to add date/time stamp to file name without time change creating new files

    We have setup our application to save data once a trigger event occurs. We also need the date/time stamp as part of the file name. We used Format Date/Time String and concatenated it into the file name. It all works good, but as the time changes (seconds, minutes, etc.) it causes the Write to File to create a new file with the new filename. Is there a way to create the file and save/latch/buffer the time in the file name so that it doesn't create a new file for every second?
    I've attached a shot of the relevant part of our VI. It's all in a big while loop. The data save is in a case/switch so that when it is triggered it starts saving. (The for loop is to split the data up
    into 4 different files). Like I said, it all works except new files are created every second as the time changes instead of just putting it all in one file with the initial time in the file name.
    Attachments:
    TimeInFileNameQuestion.jpg ‏46 KB

    I need a loop in order to use a shift register. I cannot stop the outer while loop (because it would stop the hardware from collecting data), and I cannot add loops inside which bogs down the processor to where the app stops. I've attached a simpler version of my VI which illustrates the problem. While the button is pressed (the trigger) it should save the data (in this case just cycle numbers) into one file with the initial date/time. But, you can see that it creates 1 file/second. I tried using shift registers, but without adding extra loops I can't see how to do it. Thanks
    Attachments:
    FileNameTest.vi ‏29 KB

  • How to View Date time stamp on Video

    I am importing AVHD video into i move 8 and want to have date and time stamp on the video
    any ideas on how to set this up?
    I am importing video from a card reader.
    josh

    Three methods:
    File>process multiple files>labels. Be sure to uncheck "same as source", or the originals will be overwritten. It is best to work on duplicate files, esp. while learning.
    Use the horizontal or vertical type tool to add the information manually to each picture file
    If the same information is to be applied to several pictures, e.g. a copyright notice, use  of a brush made in PSE is very efficient

  • How do I implement time stamps with my readings when I import to Excel?

    I currently have 3 channels running off of DAQ Assistant and plan to eventuall add more, so far I have set up my code to creat an array send as .csv file, How can I add a column for time stamps for current time?  It is required to know date and time that I am logging my data?  Please help!  Attached is my code  FYI I have a Milisecond delay timer on the THIRD Frame of the case structure.
    Attachments:
    Sergio Updated.vi ‏101 KB

    Hi ChrisR774,
    Please take a look at this example: https://decibel.ni.com/content/docs/DOC-14138
    National Instruments
    Applications Engineer

Maybe you are looking for