How to add a title to button in flash?

Hi,
I have a button in flash and a action layer with the following script:
button1.addEventListener(MouseEvent.CLICK,clickHandler);
function clickHandler(event:MouseEvent):void{
navigateToURL(new URLRequest("http://mortimerhall.99k.org/homepage.htm"),"_self");
Now I would like to have a title when user move mouse over a button eg "Click To Enter".
I tried this code in a new layer but it doesn’t work:
on (rollOver) {
text = "hello";
on (rollOut) {
text = "";
I would be grateful if you could help with it.
The button has of course the "Instance Name".
Thanks
PS My first post, sorry for wrong place or any mistakes
I have a cs5.5 Pro.

Thanks! Your method is working fine. It is enough for my needs.
For any one that may want to see it:
button1.addEventListener(MouseEvent.ROLL_OVER, rollOverHandler);
button1.addEventListener(MouseEvent.ROLL_OUT, rollOutHandler);
function rollOverHandler(e:MouseEvent):void
     text2.visible = true;
function rollOutHandler(e:MouseEvent):void
     text2.visible = false;
it's fine being new to flash, but when you don't explain what you are trying to achieve very clearly and then use terms like title when you mean tooltip cna be very confusing for those trying to help.
Sorry, my bad
Thanks again!

Similar Messages

  • How to add a Title (slide? screen?) BEFORE the video track

    Hello,
    I'm very new to Adobe Premiere Pro and I'm trying to figure out how to add a title to my project but I don't want the title on the start of the video in the sequence. I'd like to add it to a black screen, maybe with some transition effects, that will play prior to the video starting. Do I need to create a black image in CS and add it as a still and just add the title to the still which I can position before the video/audio track A starts?
    I'm hoping that there's something I can do right within Premiere that will give me a place to put the title before my video starts. I didn't see an option to add a blank slide or something to that effect that I can add title to.
    thanks for your assistance!
    The more I learn the more excited I get, this software is great.

    Thanks for the link.. like I said in my post, I'm brand new to the software and I've been watching and following guides for hours. Time is not on my side, I have a project that must be done by the end of this week and I have very limited time after work.
    So when I have the head at the begining of my main track and click INSERT in the source monitor window it inserts a duplicate of the entire video so I have TWO videos in my sequence. This is clearly not what I'm wanting so I'm assuming that there's something I'm missing. I've searched google but don't see anything.
    I'm just looking to add a black, blank screen that I can add a title to before my video begins. I realize this may be rudamentary to season vets but as I said, I'm very new and trying to learn this all quickly and I would really appreciate if someone could point me directly to some information about it. I'm not afraid to read and learn, hell I love it, but I'm pressed for time so someone just telling me, "go learn the software" with a link to a huge FAQ, doesn't really help me.
    I've already learned a ton from some great guides but I have yet to have anyone indicate how to add extra footage (be it a still or blank video) directly from Premiere Pro.
    Thank you all for your time!
    EDIT: I think I figured it out... I just bumped the start of the main track up about 10 seconds and I added new item "Black Screen" right in front of it. I will add the title to this. Thanks all.

  • How to Add the title name for Graph in Excel

    Dear Friends
                      I am using LabVIEW 8.0.I need how to add the title name for chart in Excel.
    Jayavel
    Solved!
    Go to Solution.

    Do you have the Report Generation Toolkit? If so, the Excel Easy Graph VI has an input for that.
    If you don't have the toolkit then you will need to use ActiveX. Please do a search on how to use ActiveX (there are examples that ship with LabVIEW) to control Excel. There are also lots of example in the Excel thread. NOTE: DO NOT POST QUESTIONS IN THAT THREAD. 
    Ultimately you will need to look up the information in MSDN. 

  • How to add the Date Track Button

    How to add the Date Track Button on a customized Form ?
    1. Profile of Datetrack:Enabled = Yes
    2. All HR Forms includes the Date Trak Button
    3. On the Customized Form "Alter Date Track" can be activated from Menu :Tool --> Alter Date Track.
    I'd Like the Button to appear on button ruller.
    Thanks for help

    Rachel,
    Please review the following notes, it may be helpful.
    Note: 177733.1 - How Date Track Works
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=177733.1
    Note: 169059.1 - Understanding the Flow of Date Track Dates Through the Forms
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=169059.1

  • How can we create such navigation buttons using Flash CS4?

    Hi,
    How can we create such navigation buttons using Flash CS4 is in the following website? Please help me with any such tutorial to make my custom navigation bar/buttons.
    http://city.reallusion.com/join.html
    Thanks.

    While the Note 4 is a reasonably large device it still falls into the phone layout bucket. We need this layout to function on very small screens some as low as 320 pixels high and 240 pixels wide. These sorts of devices don't have the space for a full toolbar.

  • How to add a google+ share button to a composition?

    I am working on a little app for which I want to add share buttons.
    I don't have problems adding Facebook share and Twitter buttons, However I cannot find a way to add a Google+ share button.
    For FB I create a rectangle and name it fbBtn. Then on click I add the foolowing code:
    FB.ui({
              method: 'feed',
              name: 'Win designer fashion jewelry from Baloka',
              link: ' http://www.mysite.com/',
              picture: 'http://www.mysite.com/external-xfbml/share-image.gif',
              caption: 'Win designer fashion jewelry from Baloka',
              description: 'Baloka is giving away 22 designer fashion jewelry by Maria Mizrahi. Check this out. Do you want to win? You could...',
              message: ''
    For Twitter I create a rectangle and name it twitterBTN. Then I add this code to document.compositionReady:
    var twitter = sym.$("twitterBTN");
    var c = '<a href="https://twitter.com/share" class="twitter-share-button" data-url="http://baloka.com/content/socialApp/fb.html" data-text="Win cool trendy designer fashion jewelry - check this out" data-via="BalokaDesign" data-count="none" data-hashtags="BalokaSweepstakes">Tweet</a><script>!function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id =id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(docu ment,"script","twitter-wjs");</script>';
    twitter.html(c);
    For Google + I found two ways to add a share button:
    First:
    Adding this snipped to the html document (not in EA):
    div class="edgeLoad-EDGE-467457915"><a href="https://plus.google.com/share?url={http:baloka.com}" onclick="javascript:window.open(this.href,
      '', 'menubar=no,toolbar=no,resizable=yes,scrollbars=yes,height=600,width=600');return false;"><img
      src="https://www.gstatic.com/images/icons/gplus-16.png" alt="Share on Google+"/></a></div>
    and adding this to the head:
    <!-- Add the following three tags inside head. -->
        <meta itemprop="name" content="Baloka Sweepstakes">
        <meta itemprop="description" content="Win designer fashion jewelry by Maria Mizrahi - Baloka.
        There are 22 prizes including earrings, bracelets, necklaces and a couple of $100 gift certificates.
        Please share with your friends.">
        <meta itemprop="image" content="http://cdn2.bigcommerce.com/server2100/a154e/products/102/images/243/LittleTotemEarrings__ 55527.1355162788.1280.1280.jpg">
    This works as expected, but I am having a hard time position the button in the right place on my page. I can see the button in EA, but the position I set it in there is not maintained once the file is published.
    Thus, I would like to know how to include the code directly in EA as I am doing with the Twitter and facebook buttons.
    Second:
    Adding this to the html document (not in EA):
    <div id="gplus1" data-action="share" data-annotation="bubble" class="edgeLoad-EDGE-467457915"></div>
    <!-- Place this tag after the last share tag. -->
    <script type="text/javascript">
          (function() {
                    var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true;
                    po.src = 'https://apis.google.com/js/plusone.js';
                    var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s);
      </script>
    Again, this works, although with this code I don't know  how to customize the name, description and image for the info I am sharing.
    In this case I was able to include the code on EA adding the following to document.compositionReady:
    var googleplus = sym.$('googleplus');
    var click = "javascript:window.open(this.href,'', 'menubar=no,toolbar=no,resizable=yes,scrollbars=yes,height=600,width=600');";
    var g = '<a href="https://plus.google.com/share?url={http://baloka.com/content/socialApp/fb.html}" onclick="click";return false;"><img src="https://www.gstatic.com/images/icons/gplus-16.png" alt="Share on Google+"/></a>';
    googleplus.html(g);
    The problem here is that instead of opening a window, it replaces the page with the one supposed to be on a different window, which I don't like.
    So, in short, I need some help figuring out how to include the code directly in EA for the first method for Google+.

    I don't have an answer for you, but I do have a question. You said the FB code works. What did you do? What did you put in your html page? I tried the FB code above and it gives me an ID error. Appreciate it if you can elaborate more. I just posted the ff in the forum "Customizing FB Share in Edge Animate"
    Thank you!

  • Looking for tutorial: how to add a big "Play" button to a web Flash   video

    Can't seem to find out how to do this: I've imported a Flash
    8 video to
    a web page (with autoPlay set to false) and it has a
    controller skin
    underneath it, but I'd also like to show a big "Play"
    triangle button in
    the centre of the video, like you see on all the Youtube
    videos. How do
    I add that and make it start the video? Any clues for the
    clueless
    would be appreciated!

    Nickels55 wrote:
    > Not too difficult.
    > First create your button or movieclip with the big
    arrow.
    > Give your flv playback component an instance name like
    vid.
    > Create a new layer above the video layer. Drag your
    button/movieclip to the
    > stage.
    > Give the button/movieclip an instance name like
    vidcontrol.
    >
    > Put this actionscript on the frame (not attached to the
    button or component):
    >
    > vidcontrol.onPress = function(){
    > vidcontrol._visible= false; //makes arrow
    button/movieclip invisible
    > vid.play(); //makes video play
    > }
    >
    > Tested code and concept and it works perfect.
    Brilliant, works like a charm. Thanks very much, Nickels55!
    Is there a way I can add something like your
    "vidcontrol._visible=
    false;" to the "Mojaveexternalall.swf" skin as well? Right
    now if I
    click on the big arrow, everything works fine, but if I click
    on the
    Mojaveexternalall's small Play arrow instead, that new button
    layer
    doesn't disappear.

  • How to add a title to the book cover/spine?

    Hi,
    appears to be a stupid question, but I couldn't find any answer in the Videos by JK o any other help page:
    How can I add a title to he book cover and the spine of a blurb-book made in LR5?
    I could not find any cover template having a title (only a lot of text).
    Thanks a lot in advance,
        schleifi

    I have worked with Booksmart and made one book successfully. I have also made a book in Lr 5.2 and had it printed by Blurb to my satisfaction.
    Compared to creating a book in Lr the workflow in Booksmart is cumbersome and slow.
    (1) During the creation of a book in Lr I test the book often by exporting it as a PDF. This option is only available when you select PDF instead of Blurb - but it is possible to switch between PDF and Blurb without harm. The only change is that the Blurb logo page disappears when PDF is selected. Viewing the PDF in Acrobat tells me what the book will look like in print since my monitor is calibrated and set to the correct intensity (brightness).  It also tells me if my sharpening is good. For the export to PDF I select 100 for quality; color profile sRGB; file resolution 300; sharpening High; media type glossy.
    A Blurb representative told me that these settings come close to the settings that Lr uses when the book is uploaded to Blurb.
    In Booksmart I can't export to PDF.
    BTW you should sharpen the image so much that it looks a bit too sharp in your PDF. When the boook is printed the ink droplets spread out a tiny bit before they dry. This tends to make the print softer than it looks on screen.
    (2) Booksmart is not color managed. Therefore in Booksmart you have no feedback how your book will look in print. If you want to test your images you have to softproof them in Photoshop.
    (3) When I make a book I find often that my develop adjustments are not optimal. In Lr it is very easy to switch the the Develop Module, make the necessary adjustments and switch back to the Book Module. With Booksmart you have to export the adjusted image again - or it has to be re-published if you use the Blurb plug-in.
    (4) In the past I have made complaints that Lr does not give enough flexibility for the layout. Since then I have worked more in Lr and I find the Book Module actually quite good.
    I find that the full page bleed allows the most flexibility for creating my own layout. Starting with a full page bleed I use the padding feature to place the image anywhere on the page and in any size I want. The boxes for "Page Text" and "Photo Text" allow for more than one column. The text can be edited by adjusting Tracking (all letters are spaced wider/closer), Kerning (individual pairs of letters can be spaced), Baseline (letters can be pushed up or down), or Leading (the distance between different lines of text can be adjusted). There are no such features in Booksmart.
    (5) Selecting a color for page background or for text is cumbersome in Booksmart. In Lr it's easy.
    The cover of my first book in Lr looks like this:

  • How to add an 'Embed Code' button?

    I publish a webcomic in Flash that is a simple slideshow:
    http://minigiggles.com
    I would like to add an 'embed code' button that copies the embed code to the users clipboard so they can easily embed my cartoon on their site. How do I build that button?
    Thanks,
    Tom

    @Allan: Actually, the inability to add prefixes to phone numbers is quite annoying. Disallowing prefixes for those of us who need it is not "user friendly and convenient", even if we are not in the majority. Prefixes are needed when dialing international calls from different cards, temporarily disabling caller ID, etc, etc. Adding the prefix to each contact is very inconvenient option, as there is no way to do it automatically.
    Third party apps can provide the feature, one is suggested above. However, for some reason Apple has decided that third party apps cannot add the signs # and * to numbers. In my case, I have an iPhone through my employer. I need to add a prefix containing those signs when making private calls. Now, I guess I could manually enter the prefix in each non-company contact in my address book. You tell me if that is user friendly, or something a computer could do for me.

  • How to add an image or button to an AdvancedDataGrid cell with wrapped text alongside

    I have an advanced data grid with which i need to add either
    images or buttons to individual cells alongside the text.
    This i can do, but what i can't figure out is how to make the
    text wrap.
    Currently, I can make cell text wrap by using an itemRenderer
    which extends Text. Or, I can add an image or button to a cell by
    using an itemRenderer which extends HBox and contains an image or
    button child. To this HBox i can add a Text or Label object also,
    but i can't make the text wrap.
    Does anyone have any ideas/suggestions/solutions????
    Thanks
    Mark

    "ms10" <[email protected]> wrote in message
    news:g8jlb5$l6p$[email protected]..
    >I have an advanced data grid with which i need to add
    either images or
    >buttons
    > to individual cells alongside the text.
    >
    > This i can do, but what i can't figure out is how to
    make the text wrap.
    >
    > Currently, I can make cell text wrap by using an
    itemRenderer which
    > extends
    > Text. Or, I can add an image or button to a cell by
    using an itemRenderer
    > which
    > extends HBox and contains an image or button child. To
    this HBox i can add
    > a
    > Text or Label object also, but i can't make the text
    wrap.
    >
    > Does anyone have any ideas/suggestions/solutions????
    I'd look at the code for AdvancedDataGridGroupItemRenderer
    and try to see
    what keeps it from displaying an icon in the columns that are
    not grouping
    columns. I'd then extend it to change that and use an icon
    function.
    HTH;
    Amy

  • How to add custom link or button to task details page to open a different t

    Dear All
    In HumanTasks Workflow, On task details page, I want to add a custom link or button. Clicking on this link or button, should load a different task details page.
    The exact business usecase is like this:
    1. We have some human tasks with very detailed payload like about 100 attributes. When the task is submitted for Approval, we send notification emails. These emails shows the Task Details with all these 100 attributes along with standard Approve, Reject buttons etc. NOW in addition to this, we want to add extra custom button/link like Custom View. When we click on this buton or link, it should replace the task details page with the Custom task details page contents. The reason is most of the managers/approvers access their emails on smart phones like iphones. So in these phones, seeing full task details (100 attributes) is very tedious. So we want to provide a simplified view of same task with very minimum attributes like about 10 with Approve, Reject buttons. Now this compact view details will have a button called Detailed View on click on which it loads details page.
    So we want to have 2 pages for a task:
    taskDetails1.jspx -> Has all 100 attributes with a custom button/link called "Compact View". Click on Compact View switch to below page.
    taskCompact1.jspx -> Has only 10 attributes with a custom button/link called "Detailed View". Click on Detailed View switch to above page.
    1. I tried implementing this using the VacationRequest sample where the payload is like creator, startdate, enddate, reason. I already have taskDetails1.jspx page, which shows this information in the email body.
    2. I want to add another button to taskDetails1.jspx so that when I click on it, I want to load a different page like taskCompact.jspx which has only say creator, reason.
    I already added a link and gave the url with parameters like taskId, taskContext etc which I got from bindings, but nothing is displayed when I click on custom button. The taskId, context values are comming correctly in the url.
    So bottom line, what is the URL that I can provide in the task details page, to load a different task details page contents. I want to pass other taskdetails jsp details.
    Please let me know, if there is any other approach to implement this usecase.
    Thanks in advance
    Ravi Jegga

    Hi,
       I am not sure if you can add your own custom buttons to the application tool bar because your table control is in a sub screen area in a standard screen so the menu area would be controlled by the standard screen and not the subscreen , but along side the table control you can give buttons for scrolling and handle the same in the subscreen if you check the FM EXIT_SAPLMEREQ_002 it has a variable IM_UCOMM which would have the ucomm set in the subscreen so here you can handle your user command to scroll on the table control.
    Regards,
    Himanshu

  • How to add sound to a button in storyboards on xcode Version 4.6.2 (4H1003)?

    i am running xCode Version 4.6.2 (4H1003) on my macbook air with mountain lion.
    i am trying to add sound to a button that is in the scroll view but i cant?
    PLEASE I NEED HELP ASAP!!!

    Have you looked in the Attribute Inspector got the button? You can attach simple sounds to the button there,
    If you need more look at NSSound Class

  • How to make a completely transparent button in Flash Builder

    I am making a mobile application, and I am wondering how to make a completely transparent button. I've tried using
    <s:Button x="-5" y="0" width="410" height="1504"
                                    skinClass="spark.skins.mobile.TransparentNavigationButtonSkin" click="navigator.pushView(Sun)"/>
    But it still has one line on the side. I need a way to make it completely transparent.
    Thanks,
         8th grade student

    Try this alpha="0.001"
    Also add useHandCursor="true" and buttonMode="true" if you wish to have the hand cursor appear on hover.
    example  x="10" y="10" width="169" height="54" label="Button" alpha="0.001" useHandCursor="true" buttonMode="true" 
    HTH

  • How to add Audio to a button

    Exactly as the title says, how can I add a ding to one of my buttons whenever the user clicks it?

    Hello,
    This is relatively straightforward once you understand how to work with a Var in Siena
    Assuming you start from blank screen
    add your sound via App Data / Media (right click for the media
    add an "Audio" control to you screen (right top cross)
    in the "Autostart" of your Audio1 put "bstart" without the quotes
    in the OnSelect of the button put
    UpdateContext({bstart:false});UpdateContext({bstart:true})
    So far you will then have a button that plays you that sound.
    You will have to decide what to do with the action you have behind. If the action is within the same screen you can add directly after the OnSelect of the button.
    Most likely you will need to move to another screen and then you should add the action in the OnEnd of your audio control
    Navigate(Screen2,ScreenTransition!Fade)
    Two remarks
    You can set the visibility of your Audio1 to "false" (select the audio and go to express view "visible". If you want to select it again and toggle the visibility you can use the control drop down on the top left to select your Audio1
    If you have multiple buttons you want to add the sound the safest way is to add a few other players as otherwise the OnEnd will be quite tricky if you just use one. You can safely point the audio control to the same media file but replace the bstart
    I mentioned above to "bstart1" for the first, "bstart2" for the second, etc.
    Hope this explains it a bit.
    Regards
    StonyArc
    http://www.stonyarc.com http://www.xboxlivenation.com

  • How to add image as radio button label instead of text

    In a pure AS3 project, is there a way to add use an image placed in the library/ Flex/AIR SDK compiler path instead of text as a radio button label?
    I've tried substituting character may unicode like:
    rb1.label = String.fromCharCode("0x2592");
    But how this displays is dependent on the device, font character availability. Displays unpredictably.
    Would prefer anyway to use an image that I can create in AI.
    Any help appreciated.

    OK. I tried this, and it works.
    (Hopefully, the image will display in the same location, next to the radio button, on different devices.)
    Thank you.

Maybe you are looking for