How to add an extra dynamic columns in workflow inbox?

Hi Every Expert,
Transaction SWL1 only provides Six columns as dynamic columns for workflow inbox. But we need to use 7 to 8 dynamic columns. How to add these two extra columns into workflow inbox?
Thanks,
Shirley

Thank you very much for all you responses.
Due to SAP only provides 6 columns, I can't add anohter extra dynamic column. I may consider to change task to show the contents in preview pane.
Thanks again to everyone.
Shirley,

Similar Messages

Dynamic column in Workflow inbox

HI All ,
     I would like to add a dynamic column in the SBWP layout which reflects the Last reserved by user...
    Any suggestion will surely be rewarded...
Thank you
Srinivas

Hi Srinivas,
the value will be updated each time the work item is <i>reserved</i>. When it is put back again, this value just stay as it was before.
The virtual attributes gets refreshed when the inbox is refreshed (by refresh-button or by re-entering the Workplace).
The algorithm to determine the last user, who has reserved, is the following:
DATA: user_id_last_reserved    TYPE SWWLOGHIST-meth_user.
CLEAR user_id_last_reserved.
SELECT SINGLE meth_user
              FROM SWWLOGHIST
              INTO user_id_last_reserved
              WHERE wi_id = object-key-workitemID
                and method = 'SWW_WI_SELECT'
                and timestamp IN (
                    SELECT MAX( timestamp )
                           FROM SWWLOGHIST
                           WHERE wi_id = object-key-workitemID
                            and method = 'SWW_WI_SELECT'.
IF sy-subrc <> 0.
   "There's no such user
ENDIF.
Have fun,
Florin

Dynamic Columns in Workflow Inbox

Hi,
We are seeing some eratic behaviour with regards to the Dynamic Columns assignment in the Layout Variant of SAP INBOX.
We have assigned the Dynamic Columns, but altough the Customisation in SWL1 has the assignment they are still not visble in the INBOX of the Users. They still appear as DYNAMIC COLUMNs instead of the Names (Material, Ship Date, etc) .
Any inputs on why this eratic behavior or what is missing that prevents it from appearing.
Thanks in advance,
Arunava

Hi Amandeep,
We have also asssigned it Task wise. Just to let you know some erratic behaviour.
1. Some user can see the new assignments while Other dont.
2. Also when we go to Group By in the Workflow. For the Old Workitems we dont see them but can see them in New Workitems.
3. We had the same problem when we transported it to our Test System. But it automatically corrected itself after a days time.
Can you give me an information. If we have more old Workitems( that used a different task which we have changed ) than the new ones ( created with the new task assigned in the SWL1) does the dynamic columsn behave eratically. As I read an OSS note 394090 that talks something on this.
Please inform if you have more information.
Thanks and Regards,
Arunava

Define Dynamic column for integrated inbox

hi ,
can any one explain me what is the puprose of this setting.
SPRO>SRM>Cross application basic settings>sap business workflow>define Dynamic columns for integarted inbox.
what we maintain here and how it is helpful
regards
subhash

Hi Subhash,
Please check if the following link helps you:
How to add an extra dynamic columns in workflow inbox?
Regards,
Saumya

How to add description of a column of a table in SQL Azure

Hi
I have some tables in my application database where there are descriptions added against certain columns. Needless to say they were done by using sp_addextendedproperty.
Now I am trying to migrate the Database to SQL Azure. SQL Azure does not support sp_addextendedproperty.
Hence I am not able to figure out how to add descriptions to those columns.
Any help would be much appreciated.
Thanks
Soumyadeb

Hello,
Just as Latheesh post above, Windows Azure SQL database are not support extended stored procedures. That’s one of the limitations on SQL database, and I don’t know there is another way to achieve the same on Azure.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

How to add a frame dynamically in a jsp page.

Hai all,
In my application, in a particular jsp page i had the 3 links namely add.edit and delete. When click on add button, it is pointing to another jsp page where i can enter user details. But what i want now is when i click add button, the form in which we fill the user details should be added to the current page itself dynamically i.e., it should not go to another page when i click add button and that form should be displayed in the current page in a new frame dynamically.
The same should happen when i click n edit or delete options. everything should be diaplayed in the same page in different frames.
Can anyone suggest me about how to add a frame dynamically.

You create a frameset with two frames. One frame you give 100% of the rows and run the JSP in this frame. The other frame you give 0% of the row so that it is hidden. In the JSP you use a JavaScript funtion to submit the form. This function will call the parent frameset to reset the row values to 50%/50% which will make the bottom frame visible and then submit the form request with the bottom frame as teh target.
It is not so much as creating frames as using JavaScript to hide and display frames.

How to add an extra page to the index.html page on dreamweaver CS6?

How to add an extra page to the index.html page on dreamweaver CS6?

Index.html = your domain's home page. There is only one home page per site.
To create a new page from your index, go to File > SaveAs > filename.html. Repeat for other site pages. Add links on your index page that lead to other site pages.
See Creating your first web site in DW CC (5-part tutorial)
https://helpx.adobe.com/dreamweaver/learn/tutorials/how-to/first-website-part1.html
Nancy O.

How to add an extra DVD drive to a MacPro?

How to add an extra DVD drive to a MacPro?
Is there any where instruction on the procedure?

There are instruction in the manual that came with the computer. Set the drive jumper to CS (Cable Select). You will need to remove the tray's lip.
<http://eshop.macsales.com/tech_center/index.cfm?page=removedrivedoor.html>
Be careful not to pinch or cut the cables when reinstalling the drive carrier.

How to add ComboBox to dynamically created DataGridColumn ?

hai friends,
help me, How to add ComboBox to dynamically created DataGridColumn

public function docfoldercurtainmanagerResult(event):void
if(event.result){
rightslistArray=event.result.RES2;
//Alert.show(event.fault.message);
<mx:DataGridColumn
headerText="Rights Level" minWidth="75" sortable="true" >
<mx:itemRenderer>
<fx:Component>
<mx:ComboBox dataProvider="{outerDocument.rightslistArray}" labelField="sec_rights_level" />
</fx:Component>
</mx:itemRenderer>
</mx:DataGridColumn>

How to pass Stages Guid dynamically in declarative workflow

hello,
How to pass Stages Guid dynamically in declarative workflow.
Example For List we used to pass guid like this
System.Guid.Parse("{$ListId:Lists/Testlist;}")
help me out to pass stage guid...
any help would be appreciated!!!!
Thanks regards, Vignesh.

You need to make use of command line arguments. You can go through this link for example.
http://www.freeos.com/guides/lsst/ch02sec14.html
In your shell script(say test.sh) you can have
exp fas/xxxxxx@fasbd001 file=audit_grn_28aug.dmp tables=audit_grn query=\"where org_grp_i=$1 \"$1 indicates it accepts the first argument from command line. if you want to pass 19, add that next to the script you're executing.
From command line you can call this shell script say test.sh 19

How to add af:inputFile dynamically within each row of table?

I need to add af:inputfile dynamically within each row of af:table, when the user hits a commandlink at the bottom of each row.
I have tried wrapping af:inputfile with af:foreach:
<af:table value="Bean.rows" var="row">
<af:column>
<af:forEach step="1" begin="1"
end="#{Bean.filecount}">
<af:inputFile label="Please upload a file"
id="1"
valueChangeListener="#{Bean.onClickUpload}"/>
</af:forEach>
<af:commandLink text="Add more file" id="cl3" actionListener="#{Bean.onAddFile}"/>
</af:column>
</af:table>
in Bean.onAddFile, I have:
public void onAddFile(ActionEvent event){
filecount++;
It works but there's no independent control of each row. When I click one commandlink, All rows now have 2,3,.... af:inputFile. The change affects all rows.
The requirement should be that when I click one commandlink in a row, only that row shows additional af:inputFile.
So why not leverage the row variable of the table, right? That's what I did, I changed the end attribute of foreach to the following:
<af:forEach step="1" begin="1"
end="#{row.fileRowCount}">
the backing bean method changed to the following:
public void onAddFile(ActionEvent event){
int filerowcount = (Integer)JsfUtil.resolveExpression("#{row.fileRowCount}");
Integer newcount = filerowcount+1;
JsfUtil.setExpressionValue("#{row.fileRowCount}", newcount.toString());
Note that "row" refers to an object that has a int field called "filerowcount". And the initial value is "1".
Just for testing, I also added <af:outputText value="row.filerowcount"/>, to see if the count is what I expected it to be.
I didn't see the any af:inputfile this time, but the outtext is showing the filerowcount properly. When I click the commandlink, the number changed to 2,3,..... Also in the backing bean newcount and filerowcount is incrementing correctly.
I know the begin, end attribute means the index of a for loop. So I changed begin="0", it now shows one row of af:inputfile, but when I click the commandlink, no additional rows are shown. (Although the outputtext of filerowcount keeps incrementing as expected.
So to sum up, the END attribute of af:foreach row CAN pick up the value from the backing bean and render af:inputfile dynamically, but it CANNOT pick up the value from the the field in VAR object of a table.
Is is a known issue? Or I did something by mistake.
Is there any other way to add af:inputFile dynamically within each row of table?
Any advice/comment is appreciated.

Hi,
here is how it goes:
- add an af:inputFile to the column and set its rendered property to point to a managed bean property. The managed bean property has a default value of "false" and the bean should be in viewScope
- create another variable that holds the row number that should show the inputFile component. This is updated by the command link and evaluated by the get method of the managed bean property controlling the inputFile visibility
- Define a property name for the table varStatus property
- For the command link, define a attribute f:attribute with the name rowNumber and set its value to #{varStatusPropertyName.index}
- define an action listener for the command link
public void showInputFile(ActionEvent actionEvent){
int rowNumber = ((RichCommandLink) actionEvent.getSource()).getAttributes().get("varStatusPropertyName");
//set the value on the internal variable
- In the getter of the property that defines the render value of the inputFile, use code like this
public boolean get<whatever name you use>(){
//access the following EL from Java #{varStatusPropertyName.index}
int currentRenderedRow = <EL result here>;
// compare the current row index with the one set by the command link, which is stored in the variable of the managed bean
if true return true
else return false
- Set the PartialTriggers property of the table to point to the commandLink ID so the table is repainted when the command link is pressed
This should then render the fileInput component for a single row (the one you clicked the command link in)
Frank

How to add LOV Data dynamically

Hi Experts,
Working in JDEV 11.1.1.3.0
I have a requirement as need to add LOV values dynamically.
I have Button to add rows in the table(transient VO), table as 2 columns one is value and another one is description, this description is lov(InputListOfValues -- Another Transient VO).
This ListValues are dynamic, i need to get these values from Webservice call, this i have already written which is working fine.
Now My requirement is the LOV should be get values dynamically for each corresponding value in the row.
For this in add method, Added data to the LOV TransientVO, but when i click on inputComboLOV symbol, i am not getting any values, i put debugger values are setting to the transient VO,
but when i click on lov symbol i am not getting proper values.
Is there way to implement this requirment, can any one suggest me.
Can we make transient VO as LOV VO?
Edited by: user642703 on May 10, 2012 2:45 PM

Hi,
I think what you need to do is to access the Web Services from a programmatic view obeject to build a model driven LOV. If you did this then have a look here: http://www.oracle.com/technetwork/developer-tools/adf/learnmore/89-adfbc-lov-switcher-454168.pdf
Frank

How to add blank lines (in column) in SQLplus

I get error when doing below insert, how do I add blank lines in column (via SQLplus)?
insert into a values(1, '78 ABC house,
Some Road
London E34');
Thanks

Just set "SQLBLANKLINES" to ON:
SQL> set sqlblanklines on
SQL>
SQL> insert into dept values (50, 'This department
2
3 has several
4
5 blank lines','This
6
7 Loc') ;
1 row created.
SQL> select * from dept where deptno = 50 ;
    DEPTNO DNAME                          LOC
        50 This department                This
           has several                    Loc
           blank lines
1 row selected.
SQL>

How to add an extra field in the output of a predefined report

Hi everybody,
I have to add an extra field by name "DAYS"(VTBFHAPO-ATAGE) in the output of a predefined report" RFTMBL01".
please provide me the code and where to add in the predefined report

Hi Pasquale Isolato
the predefined alv report name is "RFTMBL01" . If u r with system please check the code and the field name i have to add ids"DAYS'.
if u are not with system please reply me so that i will sen the code also
Thanks in advance

How to add line series dynamically to a line chart in flex?

hi..i need to add line series dynamically to a line chart..depending on an array..the application is this..i have an array which stores the details of the users connected to an fmi server..the chart should display the bandwidth of each client..so the users should be added and removed from the chart dynamically...

Hi
1.I am giving you solution for dynamically adding values to the dropdown
public void addValue( ) //Method Name in Component controller
    //@@begin addValue()
          IWDNodeInfo nodeinfo = wdContext.nodeNodeTestData().getNodeInfo();// Node should be map to the view's Node
          IWDAttributeInfo att = nodeinfo.getAttribute("VechileTypes");// Attribute by which dropdown in bound//
          IModifiableSimpleValueSet svSet = att.getModifiableSimpleType().getSVServices().getModifiableSimpleValueSet();
          svSet.put(wdContext.currentNodeTestDataElement().getInpAtt(),wdContext.currentNodeTestDataElement().getInpAtt());
    //@@end
2.   wdThis.wdGetLangCompController().addValue(); // call this method in the point where u want to add values to the dropdown.

How to add an extra dynamic columns in workflow inbox?

Similar Messages

Maybe you are looking for